Рет қаралды 137,392
KIDD's latest innovation, we have developed a unique barrel interchangeable system with an extra long barrel extension of 1 7/8" length (compared to the standard 3/4" barrel extension). With this design the customer can now easily slip the barrel in and out of the receiver without resistance and still maintain the up most in stability and harmonics. KIDD now offers this alternative with our three part locking and stabilizing system sliding into a reinforced receiver. With a 1 7/8" barrel extension, utilizing an indexing flat, clamping v, and clamping flat. The indexing flat allows the shooter to perfectly time the barrel so that the extractor cut is properly aligned. The clamping v and flat secure the barrel into the receiver with two 1/8" hex head bolts.
In our premium Supergrade line of custom rifles we inlet and bed each rifle. The receiver's front flat and rear tang are bedded. The stock is modified with access points so that the barrel can be removed without removing the stock. WHAT! Yes, you can change to another KIDD Supergrade barrel without even taking the stock off of the rifle. After removing the magazine and making sure the chamber is clear, simply unscrew the two locking screws and pull out the barrel. Then, slip in your next KIDD Supergrade barrel while applying downward pressure and with a slight turn of the barrel. Use the indexing flat to make sure the barrel is properly timed and fully installed. Tighten the two 1/8th hex screws to snug and away you go.
KIDD is transitioning from the threaded Supergrade Rifle to our slip fit Supergrade Rifle in order to provide the customer with increased flexibility for barrel options. We have always provided a superior Supergrade Rifle but the threaded receiver system doesn't allow the customer the option to change a barrel which has always been at the heart of this 22 style rifle. KIDD's new rifle system easily affords the customer this option and with our complete rifle, even goes a step further and allows the shooter to change a barrel without removing the stock!
Our Supergrade receiver still comes with the easy access rear cleaning hole and interchangeable low scope base with varying MOAs available. A zero degree scope base will come installed on the receiver and an optional of 10, or 20 MOA can be purchased to assist the shooter in reaching the longer distances. Both the scope base and rear tangs have mating designs to the receiver so that our rifles have great rigidity as well as some customization aspects. We machine each receiver from billet 6061 T6 aluminum and use an anodized finish either black or silver.