• 08 KTM 450 OIL MIGRATI... this is the original video he's The one that figured this out so if you have any questions ask him. I will make a update video after a few hours of riding
Пікірлер: 25
@aTuWitty2 жыл бұрын
Awesome! Looking forward to hearing how it works out for you. I'll be doing this on my 530 soon!
@g-man-8096 Жыл бұрын
kzbin.info/www/bejne/aGabXnlorrd0Zpo
@RIPPERTON2 жыл бұрын
You nailed it dawg ! well done. see how quick the drill bit goes through and you got to select 1st or 2nd gear so the detent wheel is out of the way. After drilling, you should run the engine 5 minutes and then clean both screens out.
@g-man-80962 жыл бұрын
Thank you for the original video that's the only reason I did my. And yes I was going to run it for one hour or so and then just do a oil change and filter.
@g-man-80962 жыл бұрын
I still want to see a video about your bike and all the mods you have done I been watching your videos and I see you have a lot of interesting things on it and I would like to see in detail what's going on. Thanks
@davidschmidt5533 Жыл бұрын
Ripperton, g-man. Did you guys leave the breather hose to the carb? I used a block off kit before that swaps the hose with a bolt to carb inlet and have 2 hoses running separate on breather filters but hear a wierd higher pitch hum now. Thinking after mod i should reroute the breather hoses back to carb inlet?? 09 530 exc. Please and thank you.
@samueleiaconelli86442 жыл бұрын
if I join the two cups, can I keep the automatic distribution tensioner or is it better to put the manual?
@thetrailwaychildren2 жыл бұрын
I did this about too, done about 12 hours dirt riding and all is good so far!
@g-man-80962 жыл бұрын
Nice I have about 10 and no problems nighter
@thetrailwaychildren2 жыл бұрын
@@g-man-8096 have you done any oil changes yet? If so how have your drain plug screens been
@robinsongguitars Жыл бұрын
Nice video. Did youy find out if there is sufficient oil flow between the crankcase sump and gearbox sump? Any oil starvation in either sump? Any other issues with this mod? thx
@g-man-8096 Жыл бұрын
kzbin.info/www/bejne/aGabXnlorrd0Zpo
@rileyhicks8421 Жыл бұрын
Is this the “single sump mod”? I think I have the same issue with my 2008. How has the bike ran after this? Thanks!
@g-man-8096 Жыл бұрын
kzbin.info/www/bejne/aGabXnlorrd0Zpo
@cocinaomartxoen3minutos492 Жыл бұрын
Buenas tardes, los niveles se quedan bien después de hacer los taladros? Al bajar la temperatura del aceite que tal trabaja el piston? No se si hacerlo o dejarlo como esta puedes ayudarme
@g-man-8096 Жыл бұрын
kzbin.info/www/bejne/aGabXnlorrd0Zpo
@zozonozon33848 ай бұрын
Have same issue on my 530, did you replace cluch cover gasket with new one or I can leave old one? best regards
@g-man-80968 ай бұрын
I left the old one just take ur time pulling the cover off sometimes it sticks
@CriptoRam2 жыл бұрын
How many hours do you make with bike from doing this mood? Is it still everything running fine?
@g-man-80962 жыл бұрын
Yeah everything is good after 12 hours 2 oil changes
@g-man-8096 Жыл бұрын
kzbin.info/www/bejne/aGabXnlorrd0Zpo
@vamos_tomi7412 жыл бұрын
Good job 😀 Im going to do this mod on my bike. Is it completely solved the oil problem? Not burning the oil after that? How many hours do u have after the upgrade? Thanks a lot 😁