How To Prep & Paint A Motorcycle Engine EP06 | Ducati Hypermotard Restoration

[@markharrison2484]

I like the ethos of "it's for riding, not showing". Nice job.

[@LickyDischarge]

“I could probably take it apart” I’ve been there many times myself 😂 thanks for uploading on a Sunday morning 👍🏻

[@justinmchugh5837]

In all seriousness, you have absolutely no reason to feel bad about the job you've done it came out great. Like you said it isn't a trailer Queen it'll be ridden. Thanks for the all of the content & keep up the great work!!

[@LambChopRides]

Thanks Justin 👍

[@wdafter1]

Good to watch. I'm doing a 992 motor out of a Paul Smart so this is very helpful.

[@RaiderTheGhost]

Glad you decided to go back over it. 90% of painting something is all the prep work you do before hand. Cheers Chops!

[@The333]

That came out pretty darn good, Chopsy. Can't wait to see the re-assembled bike.

[@roberthall1437]

Chops, keep doing what you're doing, you knew what you were getting into. When its finished you'll have a bike that looks good and goes well. Be proud at what you've achieved.

[@LambChopRides]

Thanks Robert! 👍

[@stevec9959]

That was a lot of work. Well done.

[@davidbadham3712]

That took me back 34 years, when I did that to the barrels and head of my RD 350lc. I polished it all with Aotosolvol, I can still remember the smell👌🖖

[@simonnewman7413]

Enjoying the Build series CHOPS ,gonna look good once finished....All the best mate.... Si

[@spicy110]

Looking great chops!

[@anthonytempongko1291]

Practical and Simple !!!! That's the name of the game.

[@wj_owen]

Looking good. Gonna be bloody brilliant

[@bkeracing5112]

A nice trick to clean up aluminum parts is to use a soda blaster. Easy to make or use a small sand blaster. Load it with baking soda and go at it. No worries about getting grit in your engine. You can also do this with the engine installed with no worries since the baking soda will not harm anything. Its kinda messy, so do it outside. Just rinse with water to clean it up. This provides a nice satin finish, no worries about getting to aggressive with the blasting, it will not remove extra material. You can leave the finish as is, polish it, or paint it.

[@matrixdating9162]

Really enjoyed this video, look forward to the next one!

[@simonrobinson7536]

Brilliant, it’s going to look mint.Great you posted a video on a Sunday 👍

[@MrSimonfoz]

Good to see you have a normal working mans budget unlike some other channels mate.

[@renegade1987]

Very satisfying to watch, decent enough finish for a home DIY jobbie.

[@charleynoir311]

Kicking ass on a budget. Love it mate.

[@TheBroadyBikers]

Nice watch on a Sunday morning. Cheers

[@jonniebeck1395]

Really enjoying watching this project. Enthusiasm, passion and humour makes great viewing. Top man.

[@greggan100]

Scotchbrite discs work a treat on projects like this👌👍

[@adamstratford6740]

Good on you Chops i myself would never attempt anything like this due to lack of skills but i greatly admire anyone who does and also really enjoy watching them. Very well done 👍🏻 Adam 🇬🇧

[@LambChopRides]

Thanks Adam, no skill here all just in the name of getting stuck in!

[@adamstratford6740]

Lamb Chop Rides don’t sell yourself short mate.

[@alexshepard4098]

This is bloody great content!

[@highlandriders9696]

Looking good there mate. Should be epic when done.

[@AshleyJohnson-j2hno]

Great work chops ! Scotchbrite pads are great for finishing alloy 👍🏻

[@oslorider48]

Hi, might want to use a respirator for this type of work Chopsey. Its looking good though, looking forward to seeing bits going back together.

[@LambChopRides]

Yes did regret not having one... not pleasant! Wont make a habit of it!

[@oslorider48]

@@LambChopRides Should have used one my self, found lots of carbon fibre bits in my nose this evening after fixing cracked acropovic exhaust earlier :D

[@garypunter412]

Keep them coming Chops. More and longer please. 👍🏍🍻

[@willhoult]

Nice ,really looking forward to following the rest of the project 👍

[@nigelren3719]

Got to be happy with that. When the side casings are done and it's back in the bike it's going to look mint.

[@LambChopRides]

Thanks Nigel 👍

[@Junior-fd8ux]

Great video. Love your attention to detail! Is it just me or does anyone else after doing such a project after paying for stripper, wire wheels, sand paper, scotch brite, steel wool.. All the cleaners from degreaser to acetone. Now good tape an obv a good paint and primer along with your time that adds up . then think why didnt i just send it out? Because sending it out wont callis your hands ladies . That's why lol.

[@RevBombUK]

I used a soda blaster on mine plugs into an airline and being slightly caustic it eats away at a surface, then i used brake cleaner to wash it of using a spray garden pump worked wonders. Coming along well mate be safe and well

[@UsernameKate]

Really enjoyed that Chopsy! That paint job came out pretty good!!! Cant wait to see the finished product! :)

[@LambChopRides]

Thanks Kate!

[@s4c488]

Great work as always Mr chops. She will be a thing of beauty when completed.

[@daveg8325]

Great video again chops! Keep them coming! 👍🏻

[@miguelcosta530]

Well done it's coming nicely

[@andypage7928]

Just finished same job on my Ducati 1000SS! First time doing an air cooled engine, hard work! Those rubber dampers will come off with a pair of pliers on the inner edge. I broke one, they are cheap and available. Good luck with the rebuild.

[@LambChopRides]

Yes it hard going eh Andy! I've removed the rubbers, will give them a clean up before refitted 👍

[@kymcey1]

Enjoying this ! Good luck

[@parovcs9941]

Holaa Chops! Been watching all of your videos these years, and since starting this Hypermotard project, you got me waiting for it cause especially this one is a fave hooligan bike! Wanted to do exactly the same thing, purchasing a 1100s, and restore it like new. Very useful tips! Amazing job! Can't wait for new feed! Greetings from Greece 🇬🇷

[@suppersready4you]

I Really like it ! Amazing job Chops! I can't wait for the next steps...👌👍

[@busscreenman]

well done chops thanks for still getting the videos out .im very local to you and missing your triumph rides on roads that i know

[@bwoody74]

Loving this series, keep em coming. This bike is going to look class

[@LambChopRides]

Thanks, will do!

[@paul.vanhout57]

Work it may - shine it must!

[@guiltygearcore]

The time, effort and motivation. Good job sir good job.

[@cecilwilson5442]

Chops good job like you said its budget,, and your going to use it,, certainly is an improvement on what you started with and admitting that something is harder than you can deal with,, I do most of the work on the bike I own,, apart from the valve clearances,, liking this series a lot glad you bought it and not the aprilia, 😁😁😁☘️☘️☘️☘️

[@dannyracer25]

Brilliant chops 👌 more please thanks from Danny

[@LambChopRides]

Thanks Danny 👍👍

[@deanharris9331]

That looks like it's coming along very nicely. Good thinking about the colour Chops. Very impressive. 🙂👍

[@fs5866]

This is actually very cool,I was planning for quite some time about cleaning my xjr130p engine with the same method but I was worried the metal brush might bite into the aluminium so it's nice to see it doesn't and that it can be done

[@connormadle3214]

Just seen this, currently doing a similar project with an oddly shaped xr650 engine too I can see you filmed this a while back but just in case it's of any help on future projects, the scotchbrite bits on the dremel are pretty cheap and super effective Run them at higher speeds, aggressive enough to get old paint and oxidisation off, but won't chew into the cases and don't need any hand finishing either Awesome video 😎

[@KevGoesRiding]

You can't crank these videos out fast enough, loving them. Good luck!!

[@andyjackson5]

great job chops! 👍🏻

[@anthonycaldi7056]

Amazing work...Well Done!

[@reeceedwards6950]

I think it came out good for what you was trying to do. OCD can just take over sometimes😅😂😂

[@bunnydaduk]

Fantastic, next episode tomorrow 2000, live. One hour version ? please

[@blowduke]

When it’s all back together you will never see any of the bad bits ,felt the same when I did a ccm supermoto rebuild .soon as the road dirt burns itself on those fins you will be glad you didn’t spend to much time on it ...👌

[@LambChopRides]

That's very true and the standard castings are very rough in places. Actually in some areas it's better than stock!

[@mathewbarker9930]

Ah you absolute Leg End Chops, a new episode on a Sunday morning, I've been reduced to watching re - runs of Andy man cams first european tour for the 8th time.

[@Bow-to-the-absurd]

check out Moto geo

[@mathewbarker9930]

@@Bow-to-the-absurd Thanks for the recommendation. Don't know why I haven't watched him before, think I thought he was American, so I avoided the channel.

[@Bow-to-the-absurd]

@@mathewbarker9930 I remember him from 250 gp .also FortNine is fun and ARiemenn1 if off road curious

[@mathewbarker9930]

@@Bow-to-the-absurd I subscribe to FortNine already but justify that because hes Canadian. I've even gone back to Likeable Rider and Calm Biker n the search for different content, bloody lockdown.

[@andywilliams7510]

When you say you went away for a sleep, you actually mean, you laid awake all night thinking about it?

[@LambChopRides]

Haha, yes correct 😂

[@johna6968]

Looking good sir. Great series

[@thumper2140]

Elo chops again good paint job take care ride safe mate

[@deanjudd4185]

Loving the rebuild mate keep the vids coming

[@standonit8816]

anyone ever tell you that you sound like Roy Kent from Ted Lasso? 😂😂 looks good, learning a lot!

[@the_mad_leprechaun]

Oh I feel like I am back at sch ool..I have learnt so much. I too am cleaning an engine. But mine will be a coffee table when finished. 😃

[@ragerider6283]

Nice job Chops & 10/10 for effort. I think it looking pretty good so far & realistic is the word. It's too easy to get carried away with these types of projects & before you know it you're throwing good money after bad. It should look really nice with those red highlights you mentioned. Definitely looking forward to the next episode.

[@LambChopRides]

Thanks RR, few people moaning I should have stripped the whole thing but that's going OTT. If it had to come apart anyway then different story

[@ragerider6283]

@@LambChopRides Yep agreed. Easy enough to say when you're sat at home watching but different story when you're the one doing it. The reality is you're always going to be limited by the time, money & expertise at your disposal.

[@disco41]

Great stuff Chops👍 love the cossy picture in the background moonstone grey if my memory serves me correctly.

[@LambChopRides]

Moonstone Blue! My old project 👍

[@TheRtHonJimStiffOG]

Just watched the intro so far. I love you chops, don’t let this get weird

[@benjaminlawrence2864]

Looking good chops 👍🏼 I bet your glad you spend abit extra on the prep work

[@WiltshireSportingShooter]

Spot on Chops! Great job, you’re giving hope to the budding home mechanics considering a resto project 🤟

[@LambChopRides]

Thanks Ed 👍

[@RK01]

Looks like some proper mandrolic hard graft!

[@davep6286]

For a home rattle can job, it’s come out fine. The other parts your having done, will draw the eye away from the silver. Like you have said it’s a working bike.💪💪👍

[@stevescourou8006]

14mins ain't long enough!

[@paulbudford]

A defiant improvement

[@christopherdevries1969]

Looking good Chops. 👍👍👍.

[@SixthGearMotorcycles]

Great vid mate, a lot of work but worth it :)

[@LambChopRides]

Thanks Griz 👍👍

[@ronnievanmierlo755]

Hi Chops, great episode! Please don’t make the valve covers red!!! When you send the side covers off to the powder coated send the covers too in the same gold colour, won’t cost any more and it’s super strong stuff.

[@LambChopRides]

No agreed that's the route I'm taking 👍

[@greyanaroth]

I wait for this with bated breath! Keep em coming, chops!

[@RikkyTang]

Thanks for this video Chops - I'm at a similar point on my Honda Bros - the engine will be out soon and it needs a repaint. I want it to look presentable but I don't want to throw loads of money at it! This video gives me hope 👍

[@LambChopRides]

Yes in the Busa will be protected from the road crap so perfect 👍

[@mac46rr]

Sunday morning,decent day weather wise,not at work till 17:00, and I’m sat watching a man sand down an engine 🙈🤨😆 fooksake! Covid19 what have you done too me 😂 Like how this is coming together Mr Chops 👍 🏍❤️

[@LambChopRides]

Haha what has the world come too! 😂

[@seanashenden]

enjoying this . thank you

[@redleadervfr-v4906]

Cracking job Chops well done buddy, she will look great when you get her rebuilt buddy

[@steven8-stones719]

Great job mate! Uve got a lot of patience

[@michaeldolan9812]

LOVE IIITT!!!! 😁👍👍 Great work and vid too 👍👍

[@tracer1127]

Surprised some company didn’t lend you a soda blaster or similar to try out. I bet they would have sold a load of them off the back of your vid. Looking good 👍

[@exeterrider]

Here you have used my intro song, please send me money 😂👍good job and looks good. Fiddly one that.

[@lxrides2752]

I’m really loving this series, can the episodes be a bit longer?

[@bruceleong9534]

Looking good 007. ‘Twill be a lovely bike. BTW, Australian govt relaxed our pandemic laws this weekend. First ride in over a month was so much fun, even with every other bike in Sydney on our favourite back roads and highway patrol booking riders left, right and centre.

[@LambChopRides]

Good news! I bet its carnage out there 😂😂

[@thelikeablerider8800]

Coming along nicely matey👍😜

[@tonyedwards892]

At last some thing good to watch :) morning mr chops

[@chenderson4969]

Dulux rebuild chops! Going to look a heap better with new goodies bolted onto it.

[@leevendyback6129]

Great effort

[@richardpearson4248]

Great video great job 🇬🇧👍🏻

[@M0rtenaude]

Hi chops, now that it's been a few since the prime and painting, How the paint holding up? Is flailing off because of the heat or has it stayed in quite well?

[@jasong4388]

Loving this project mate...proper in to it...😎😎

[@LambChopRides]

Thanks Jason 👍

[@stabes70]

What paint did you use Chops? I have removed my 696 motor which is in a similar state and need the same TLC as this on!

[@tefer1982]

Great vids.

[@easternmenace]

That came out really good, especially compared to when I painted my mirrors lol

[@talkingrock7011]

Chops it’s starting to get to the meat of the tedious assembly being careful not to scratch or ding the prior work , good job sir

[@LambChopRides]

Yes have to be really careful as engine paint doesn't cure until its heated.. IE bike is started so chips easy at the minute!

[@R0BL0W]

I'd be tempted to try a brush-on paint stripper first

[@10secondsrule]

Oh dear, I cannot stop thinking about a guy who let this be in this sorry state in the first place. I’d probably get the engine drive back to his house and drop it on his feet If it was not for the quarantine. Good job!

[@Projectcafemuscle]

Don't go red with the Oberon slave cylinder... mines gone almost pink. Would go black or silver. Looks great man Hope there isn't too much overspray on the rest of the garage...👍

[@stevenwilliamson2916]

Wrestled with the same problem on my custom r80 build. 30 year old engines are hard to get clean without blasting. I've disassembled heads etc to get vapour blasted to take the crank out and everything else needs a lot of specialist tools so I'll just have to make do. What I have found that works well is alubright from raceglaze off eBay for removing corrosion in hard to reach places. Knowing it's not perfect is eating away at me though 😭

[@LambChopRides]

Haha yes completely agree Steven, thanks for the tip but too late now! Where were you last week 😂