LS truck coils on a SBF?! FULL INSTALL!

Hey everyone today I install LS truck coils on my sbf fox body mustang. It was honestly pretty easy and it came out pretty rad at the end of all of it. Hope this helps anyone else installing the rounf ls truck coils on their Fox body mustang.
Discord
/ discord
Instagram
/ iamchazhaynes
TikTok
www.tiktok.com/@iamchazhaynes...
Use these links to support me
MY CAMERA GEAR
Tripod
amzn.to/2EFTLzn
Microphone
amzn.to/2EMfCFD
PLEASE LIKE , SUBSCRIBE, AND COMMENT ANYTHING EVEN WHAT YOUR FAVORITE FAST AND FURIOUS IS!!!! Mine Is Tokyo Drift.....
THANKS FOR WATCHING AND THE SUPPORT!!!
More build videos are coming if your interested don't just hit the subscribe hit the bell too so you are up to date on the build!!
New videos Sundays! stay updated on the builds!!
9 second fox coming to KZbin very soon!!!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting iAmChazHaynes so I can continue to provide you with free content each week!

[@johndigenakis9725]

Wanna see a dyno video of this 700hp. Big numbers to hold you to

[@iamchazhaynes7074]

You got it! Honestly I’m so focused on that right now! I just found a dyno tuner that works with Megasquirt I’m gonna talk to him this weekend and see what we can do. But if it doesn’t make it you better believe I’m doing whatever I need to make it happen!! Haha that’s been my whole mantra since I started this was 700hp and a 9 second quarter ! So I’m glad you better hold me to it and if I don’t make it I hope you give me a ton of shit!! 😂🤣🤝

[@johndigenakis9725]

@@iamchazhaynes7074 9 second quarter is not an easy task. Have You ever driven a 10 second or even an 11second fox? Coming from an old school fox guy trust me, you need a lot of drive time. Good luck ! Keep the videos coming.

[@iamchazhaynes7074]

@@johndigenakis9725 I appreciate it! and I’ve only driven one 10 second car it was a terminator cobra with a massive whipple and it was scary as all hell 😂 but I definitely don’t think I’m going to get it first pass or even the 20th or 100th it’s definitely going to be a learning experience I plan on starting off slow my immediate goal is to hit a high 10 then work down slowly plus I still have a TON to do before the car can even handle that kind of launch! I’m in it for the long haul cause like you said I don’t have the experience to handle that yet but that’s my goal and I’m going to make it happen some day! Thanks for the comment keeps me motivated!!

[@mrfixall]

Thank you for posting this video. It will help me so much!

[@jimmitchell3331]

Great job, sounds good, can’t wait for the drive..

[@iamchazhaynes7074]

I have a set of electric fans I’m gonna slap on it and then I’ll start driving it 👍🏻 I should be doing that this weekend

[@NoFox_Given]

Awesome, I did this with MS3/pimpxs about 3/4 years ago. I used a cam sync and crank trigger.

[@iamchazhaynes7074]

The cam sync and crank trigger as you probably know is better than just the cam wheel like I have but it was so easy with the PiMPXS plug and play harness I couldn’t resist lol but if I wasn’t as lazy I would have done what you did cause it’s much better! How have you like the system ?

[@NoFox_Given]

@@iamchazhaynes7074 it’s working great, it definitely is alittle more challenging on initial setup.

[@verticaltier]

Wow nice job man!

[@iamchazhaynes7074]

Thank you I appreciate it!

[@wadestewart901]

Thats Awesome! For future reference, you can use a 7/32 or 5.5 mm socket to remove the TFI module.

[@iamchazhaynes7074]

Thanks! I had tried the 7/32 and I couldn’t get mine to fit in! Lol I guess my socket was made on the fat side so I had to go get that tool or the 5.5 mm like you’re saying!

[@wadestewart901]

@@iamchazhaynes7074 ahh got ya. Now that you say that, I remember taking g the grinder wheel to one back in the day. I forgot how tight the tfi holes were!

[@young11984]

Awesome man, you didnt hear me but i was yelling to grab your 5.5mm socket thats never been used to pull the tfi off lol. May want to put some kind of tape/foam on that k member where the coil wires are laying on, mine has a fairly sharp edge that shaved some meat off me when i was pulling the starter off a while back

[@iamchazhaynes7074]

Hahahahaha I wish I had one!! I had a 7/32 socket but it wouldn’t fit in the hole 😂 believe me I ran around for a good 45 minutes trying to jimmy rig something to make it work ! 😂 and that’s a good idea thanks ! It is pretty tough down there that’s probably something I’ll do here pretty soon!

[@DEMONFOX5.0]

Who said you can’t run Chevy parts on a Ford 🤣 great job nice install I like were you put the coils.

[@iamchazhaynes7074]

Hahahah exactly!!! 😂🤣 thanks it took some brainstorming but I really like it !

[@DEMONFOX5.0]

@@iamchazhaynes7074 it looks good I was telling the guys this past weekend at Foxtoberfest about it.

[@iamchazhaynes7074]

@@DEMONFOX5.0 oh nice! You were able to go that’s awesome! I wish I could have gone I just live in commifornia! 😂 maybe I can make the trek out there one year and meet everyone!

[@DEMONFOX5.0]

@@iamchazhaynes7074 yeah I only live about an hour away from there I’m in South Carolina. There were 718 foxes there.

[@DEMONFOX5.0]

@@iamchazhaynes7074 sorry to here you live there bro I couldn’t do it I would have to move 😂

[@79beans347]

Everytime I need that tfi tool I always have to buy it 🤣😂 I always lose them

[@iamchazhaynes7074]

Right!!!! You think you don’t need it and put it in a “safe spot” but then you can never find that safe spot 😂😂

[@79beans347]

@@iamchazhaynes7074 😂🤣😂 yeah my spots are really safe because it will never be found again by me or anyone else 🤣 because Im always putting them where I wont lose them but in reality im putting it where it will never be found again 😂🤣😂

[@hyde302r6]

Can I ask what's the advantage of running coils instead of a distributor?

[@iamchazhaynes7074]

Definitely! Main reason is spark energy. The stock ignition could not supply enough spark like individual coils can. You can use an MSD box to get that spark though, but I’ve had terrible luck with those boxes personally. Then spark control with the stock TFI you cannot command under 10 degrees of timing it goes into a limp home mode if you try. So you cannot fully benefit from Megasquirt’s cool protective features and cannot use two step to its full potential. Also driveability the increased spark makes the car idle extremely well. It has many advantages over the stock ignition as well as if a coil goes out you just have a misfire instead of a car that won’t start at all. Plus the LS guys have made HP into the 4 digits with these specific coils so they are very powerful and reliable.

[@hyde302r6]

@@iamchazhaynes7074 very intriguing sir I may try this on mine

[@hyde302r6]

@@iamchazhaynes7074 do you need to run the ms3 or will this work with the stock ECU?

[@iamchazhaynes7074]

I’m pretty sure you need some sort of stand alone engine management to use it but it doesn’t have to be Megasquirt it can be any standalone for a foxbody the lost popular right now is terminator x 👍🏻

[@timweb1510]

How is the car running man, haven’t been here in a while

[@iamchazhaynes7074]

The car runs great! I just switch from MS2 to MS3 so it’s a lot smoother!

[@timweb1510]

@@iamchazhaynes7074 good work man

[@phonypony5.0]

👍👍👍👍👍

[@iamchazhaynes7074]

🙏🏻🙏🏻🙏🏻