Mac Tools: Loads Of New Tools and I Spent Some Money On The Truck Today!

[@JovanStojisavljevic-cs1wm]

That 1/4 inch is a little monster definitely a great gun

[@fasteddie8225]

I love how stocked and organized this man keeps his truck!!! You seriously have been blessed with the best of all the big tool truck brands in the sense that your dealers are top notch

[@marcowens3522]

I just sub to you please make more tool videos fast I love tool videos!

[@asmautollc]

I’ve had the Mac 12V 1/4” impact driver, screw gun, and drill for close to a year now and ABSOLUTELY LOVE THEM. The 3.0 batteries last long and give consistent power. Zero issues or complaints. Would not trade them for anything.

[@jackreed840]

Finally made the switch the new 3/8 brushless is a beast

[@saintsarecoming13]

I run a Mac 1/2, 3/8, and a dewalt 20v drill as well as a 12v impact driver, and a 3/8 cordless ratchet. I've had everything but the drill for several years now and I have very little in the way of complaints. I've had the ratchet rebuilt twice now and a lot of it was abuse. I finally blew up my 3/8 impact after again, abuse. I beat on my tools every day in a truck and equipment shop on anything and everything. I think they're pretty good tools. I also bought the stubby pneumatic 1/2 and 3/8 impact bundle and I absolutely love them.

[@Ponyo3816]

I'm telling ya. That TS 1.0 small box with the Mac Tools Insert-1 for that Impact and socket set foam holder that slips right in the small box. Is amazing to have. What folks think is a sniper case. When I need to break out the big 1/2 full force.

[@ABH313]

I just bought the MAC 12v ratchets used on eBay! I'm deep into DeWalt already so these were a no brainer. Can't believe you featured it on this week's episode the same week I bought them.

[@Jursaw]

I love the snap on cordless ratchets. Best in the market in my mind. I love the button instead of the paddle. Nothing comes close to my milwaukee impacts and drills though. I do like the snap on 3/8” 14.4v impact wrench but I bought my m12 stubby before hand.

[@HorsepowerTherapy2]

I just bought that 1/4 impact and I love it. So light and very comfortable. Use it everyday to take out splash shield screws and light under hood stuff.

[@jantrzesiara8095]

Happy Father’s Day to all the dads out there in The world of tools. Have a great day of it

[@bluefj-wc3vz]

Lol, that impulse buyin will get ya every time.

[@PowerStrokeJude]

I have the 1/4" drive and 3/8" drive Mac cordless ratchets. I've had them since November and I have no complaints. I also have quite a few DEWALT tools and they are great!!!

[@shinkle1000]

I have the 12v impact 3/8 and 1/2. I've had them for almost a month and I love them.

[@danieltubbs458]

I wish my dewalt had a rocker trigger! You can’t beat the CT761

[@docshotrodnhobbies9019]

I picked that 1/4" impact up a couple weeks ago from my Mac guy. I like it so far, and the ratchets aren't bad, but they are bulky.

[@Terry_Baker]

Bit the bullet the other day and got me one of those 1/4 cordless ratchets to go with my MAC 3/8 and the MAC drill/bit driver combo I got last year.... Awesome

[@jonnylong7927]

Picking up a new 14.4 snappy 1/4 driver next week. Ever since I started watching this channel I been cash broke and snap-on rich, thanks clay!

[@KoonTrucking]

Sorry!!

[@michaelvalade6987]

I've been making the switch from Milwaukee myself. Hard to give up the 1/2" mid and full torque guns though. I did switch over to the new Dewalt 3/8 and Mac 1/4 and love them. I went Snap On for the ratchets. I bought the Brute and know what you mean about slow, I actually thought the battery was almost dead the first time I used it. The only 12volt Milwaukee I have at work is my little screw gun. Love that thing, and I only have to keep one battery around it lasts so long.

[@djosbun]

Congratulations on the new tools, Clay! That new Mac 1/4" impact seems to be extremely impressive. It must feel amazing in the hand due to its low weight.

[@KoonTrucking]

Yeah it does. I just posted a video on IG showing battery issues already …… 🤦🏼‍♂️

[@djosbun]

@@KoonTrucking What??! Ugh......

[@U_ever]

Great score Clay ! I know how frustrated you were by the Milwaukee product deficiencies so hopefully you will enjoy years of great service from your new MAC tool choices.

[@KoonTrucking]

Did you see my Instagram….. already issues

[@peterpalmer7014]

@@KoonTrucking should have stayed with Milwaukee. 🤣

[@Natedawolfman]

New dewalt impact has a variable speed trigger but not a selective speed but heck I love that impact. Has became my most used impact since I got it 3 weeks ago.

[@rjsaindon9080]

Love your video’s. I always add to my list of what to buy next haha! Becoming a better mechanic when you have to right tool for the job

[@rangerdanger9485]

249 for that 1/4 inch is a steal. My first buy will be the knuckle savers I blv it goes from 6mm up to 32 or 36. Hopefully they aren’t discounted

[@nachos_70firebird66]

Always buying from Mac Tools best deal's and customer service. I buy from Matco and Snap-on every now and then. I own the 3/8 ratcheting wrench for about a year and a half it holds up pretty good

[@jeffhurley3548]

That 1/4 inch impact is sweet 😎

[@jrbpit1]

I’m in the DeWalt battery eco system. I think I want to get a DCF890. $130 for a 3/8 impact bare tool is hard to beat. Im not a pro, should hold up just fine for my needs. I’ve had a DeWalt impact driver for a few years and it has been great.

[@peteh4312]

Have both the 1/4 impact and the 3/8 ratchet and love them both

[@robertmerwede9998]

I wish I had a Mac dealer like him. I like mac tools. I would be in alot of trouble on his truck

[@Dubsspeed]

The battery ratchet is a must have. The 3/8s especially! Use mine daily! Drop it more often than i will admit and it's held up nicely so far. The speed of it is perfect for automotive work i have zero completions in that aspect. Like he said how fast do u really gotta go cuz its quick enough to toss a bolt songwriter if u ain't ready sometimes lol. Only issue is mine personally is a bit difficult to switch from forward to reverse and vice versa. Not everytime but 80%of the time u goes want to switch it either that or u gotta tap the trigger and try it again. I've had it warrantied for the head lockin up on me already and figured my other issue would be fixed just because they would pull apart and fix the lock up problem but sadly I'm not convinced they did anything but clean the outside off. Say that cuz i got it to unlock itself with 10 minutes of finesse so it was free when sent off... and when came back obviously still free but switch still hard to turn but it's still going so far so I'm happy. Idc if they actually did anything internal or not tho just cuz its survived this long with the amount i abuse it lol. I give it an 8/10 . They do do a good job cleaning up the tool before sending back to u tho so that's a plus !!

[@robindabank4089]

Check the grease fitting on it, once it feels tight I grease mine and back to normal

[@peterosales2383]

My Mac tool rep shows up on Fridays. Then I buy my tools after watching this on Thursdays. Love the Dewalt 3/8 impact ! Keep up the great videos !

[@markfree5248]

Hamilton is going to get jealous.

[@crispychrispgaming9261]

I have the Dewalt dcf903 and today just for shits and giggles I used it to take off the axle shaft nuts on a new Cascadia and I was surprised that it zipped them off with little effort.

[@richardbates2367]

I've been looking at the ac Delco set of cordless ratchets but lol I don't know anything about them and I don't know that I want to spend the $119 for both the 1/4,3/8 and who knows they are more than likely a rebrand so you can probably get it at a better price so yeah..

[@mecalpsha4473]

Got the *1/4 anvil brushless ACDelco* impact as it is very compact.

[@wyattschmidt9561]

I’ve got that 1/4 gun and love it

[@mauricioiii3153]

I did the flyer deal on the impacts a few months back love them I have dewalt stuff and Mac now I’m going to look into those ratchets .

[@DudstangYT]

I got those chrom sockets those things are beast

[@donotrobme9295]

This was awesome. I love that I’m. Or the only one that buys when not expecting

[@johnnyramirez9082]

Good looking kits got me thinking 🤔

[@jeramy2398]

I went dewalt over milwaukee because of weight. When your hanging 1/4" hex impact off toolbelt and climb ladder or around a roof every ounce matters.

[@fishingmontana1564]

The wrenches are nice but you can get the tekton set for way less and everyone knows about the warranty they are the same wrench for a fraction of the price I just wish they had a offset and selectable on and off but for the price I will deal with not having it and make due with tekton

[@TONYSTARK-jh2wu]

Matco has stud removers on sale now the ones that don't damage the threads

[@dodgesportsman772]

Nice!!! Let's see them beauty work....

[@Brian-vz5cu]

Get you one of those 12v ratchets! Yes the Milwaukee are faster and maybe a little stronger but the MAC by far is more durable!

[@larryborkstrom3580]

Spending not bad if great deal

[@richardbates2367]

I really like the precision torque wrench sets they are a long pattern wrench but I can't afford to pay for both sets for what Mac costs so I will probably end up buying the craftsman v series knockoff wrench sets,, but they are a standard pattern wrench.

[@javyLSU1]

I’ve had the MAC 12V 1/4” brushless impact wrench for almost two years, and great - but it’s always annoyed me that MAC won’t make that gun in 3/8” drive - I had to buy the DeWalt instead. I even tried to swap the motor & anvil from the DeWalt to see if it would fit the MAC 1/4” gun, but they’re just different enough to not be cross-compatible. I wonder if MAC plans on releasing their version of the DeWalt 1/2” DCF903…

[@KoonTrucking]

I have no clue

[@davidwalle5025]

Good video. That's spending Hamilton money.

[@waltkosch]

Go through your toolbox. Tell us your top 5 favorite purchases of all time. Then tell us about the top 5 things you really want in the future! Slip me some free merch in my DMs. 😂

[@KoonTrucking]

Already done those videoskzbin.info/www/bejne/hKjHaGhjr9J5isk kzbin.info/www/bejne/g3XdfHqIas2Lo6s kzbin.info/www/bejne/hGLWip1ppKmFpdE There 3 of them top 10 snap on, top 10 not snap on and top 5 matco

[@waltkosch]

@@KoonTrucking SonOfADustnugget

[@mike_holdread]

I like DeWalt. I've had no problems with the stuff I have from them.

[@timgraham7851]

Only problem I've ever had with DeWalt is a battery that wouldn't charge. I was able to revive it using another battery.

[@johnbrinkley1440]

Mac is DeWalt . It’s the same tool just MAC is high quality

[@timgraham7851]

@@johnbrinkley1440 Yep. Precisely why I want the ratchet. Already have multiple batteries.

[@Enrightauto]

I’m surprised you haven’t had good luck with the new snap on gun. But I will say I don’t work on bigger trucks so maybe that’s the difference. I do like a lot of the Mac stuff my dealer doesn’t have anything close to the inventory Michael does

[@KoonTrucking]

Michael has a ton of inventory it’s truly impressive

[@chaselesser3191]

I’m surprised you actually got the Dewalt 3/8 Impact wrench. I have been eyeing their New 1/2” mid torque 20v. Surprised your leaving M12 line. But their handles are definitely bulkier than even 20v tools. So that alone may make them a little harder to manage

[@WorldIgar]

6:40 “I like how long it is” giggity

[@Taylor98564]

The new Makita XGT impact is supposed to be the bees knees.

[@scottmason5048]

Push the pin out on the milwaukee and bam you now have a button

[@marcophilhom6844]

I would be interested if your selling off your Milwaukee stuff.

[@thedude4762]

I thought about getting a set of scrapers for removing sticky wheel weights im tired of using a screwdriver that really doesnt work that well whats your thoughts i know you dont have to deal with to many sticky wheel weights but you definitely have a ton of knowledge

[@gabehintzsche2064]

I’d be scared of scratching the wheel

[@KoonTrucking]

They would probably scratch the wheel

[@KoonTrucking]

We on the same page

[@thedude4762]

@@KoonTrucking yeah ive been using a plastic trim tool but its cheap so eventually going to break it’s definitely better than a screwdriver

[@scirarocco]

A thin “butter knife” (I.e. very thin and totally blunt) to peel them up, my old shops tyre machine came with one, then alcohol/sticker/tar & glue remover to take off the residue. Alternatively (never tried it) but there’s plastic razor blades which are cheap enough and non marring, would fit in a standard scraper.

[@dustinkinard4032]

The light is nice on the impacts! I hate the one led on the bottom it’s always lighting up the spots you don’t need to see or always a shadow. Good deal. is the battery sloppy on it like the Milwaukee?

[@KoonTrucking]

No it felt good

[@dustinkinard4032]

@@KoonTrucking that slop drives me nuts I guess I’ll have to upgrade soon

[@timgraham7851]

I need one of those ratchets.

[@doylee469]

You know I hate to say this, but if those tools arent made in usa anymore, then i’ll happily just buy napa tools anymore. Plus I scout every garage sale I can and ive been getting loads of usa tools for cheap. Should last a lifetime too. I could see how mac and matco have innovative tools, and can appreciate that..but napa has been good to me.

[@donaldhollums3278]

Mr. Clay, I have a better approximate day and time of when the Mac Tool Truck, I was told by Mac doesn't exist, goes through the neighboring town. I'm going to try and chase it down Monday morning. Would you consider a comparison test between the Milwaukee and Mac versions?

[@KoonTrucking]

I don’t own the milwaukee 1/4”

[@donaldhollums3278]

@@KoonTrucking Alrighty then, it was just an ida.

[@mattlajoy453]

I heard you in the video that you're not impressed by the 1/2 inch drive from snap-on. Have you tried the ingersoll rand 1/2 inch battery impact?

[@KoonTrucking]

I haven’t

[@joedirt2062]

I've never seen a Mac truck in person and I live in Ohio

[@nickdimitrov82]

I'm about to get a new MAC guy tomorrow... I'm afraid I'll do the same 🙄

[@toddeberlein965]

Clay the magnetic force was strong with that truck!!! You got sucked on in like a bug to the zapper light. I would too with a truck stocked like that!!! That wrench deal is 🔥. Prefer those or snappy??

[@KoonTrucking]

I like them both but I prefer these wrench racks

[@tommeddaugh5717]

I have all dewalt cordless tools and mac. I love the 1/4 ratchet. They do take a beating and keep on working. I will not buy any other cordless tool

[@lovemym16]

Its a dewilt in disguise. We had them in the shop and it didn't last 6 months.

[@zacs7742]

Thinking about getting the MAC 3/8 ratchet and 3/8 impact combo #MCK12203D2. I am on the DeWalt platform now. So, the 12V DeWalt work with the 12V MAC and 20V DeWalt work with the 20V MAC. I don't have any of the 12V DeWalt batteries, do the 20V DeWalt work with the 12V max or is it a different attachment and it's only 12V to 12V?

[@adamramirez1800]

I’m trying to order that nail brush BR5555 part number off mac website since I don’t have a dealer and it won’t allow me to add to cart anyway I could order off him?

[@KoonTrucking]

Call Mac the website they have it FUBAR !

[@marcelcovaci9922]

So what brushless power tools do you guys recommend? Milwaukee ? DeWalt? Snap On feels behind on the battery powered stuff Thank you in advance!

[@KoonTrucking]

I love the Snap On 14.4 ratchet and impacts they are great. The Milwaukee is the strongest by far but after they are used they have a bunch of battery slop in them to the point where the m18 batteries will slide forward and loose contact. The M12 like in the stubby especially will rattle loose and drop out of the bottom. Each have issues. None are perfect. Just pick your poison.

[@marcelcovaci9922]

@@KoonTrucking thank you for your input sir

[@taintoolreview4188]

When you say “the other red crap”, are you talking about Milwaukee, Snap-on or both?

[@KoonTrucking]

I’m a fan of the Snap On CT761 series and the ratchets but I was meaning the Milwaukee stuff

[@taintoolreview4188]

@@KoonTrucking all my red crap is Hyper Tough. 🤣

[@tmb93]

So all precision torque is not USA made? In that case can’t get USA made sockets with the teeth for rounded bolts?

[@KoonTrucking]

Nope they are made in Taiwan

[@tmb93]

@@KoonTrucking that’s what I thought sucks their cool stuff isn’t USA made

[@KoonTrucking]

@@tmb93 I’m sure it’s done for cost reasons. It’s hard to have USA made tools with USA made materials and be competitive with the imported stuff. Most people won’t pay the 3-4x the cost for it.

[@tmb93]

@@KoonTrucking I know your right everyone has a budget it’s just nice to get tools made in USA I’m fairly new to tool trucks I buy from Mac and snap on and always ask for the USA stuff if they offer it hard to justify tool truck prices for overseas tools their “cheap” isn’t cheap lol

[@jeremynewhouse6530]

If you left happy and he left happy that’s all that matters.

[@Natedawolfman]

Wish my mac dealer wouldn't have stopped showing up

[@jrpremiumtoolsllc8426]

As a tool guy myself I can tell you that we don't like working for free. Tool guys work about 80hrs a week so it is necessary to weed out the free work to get home.

[@Natedawolfman]

@@jrpremiumtoolsllc8426 yeah since we're a 2 person maintenance crew I guess he decided he wasn't getting enough money out of us.. bought new shit every week

[@jrpremiumtoolsllc8426]

Tool dealers need to collect $300 to $400 per hour as an average. Regardless of the brand.

[@kendallas3705]

Only if I had access to a MAC truck on a weekly basis.

[@danieltubbs458]

Contact customer service

[@colslaw69]

See the problem I have with Mac is you have too many good deals in 1 damn flyer. Spread it out so I don't have to drop $500+ this month.

[@jrpremiumtoolsllc8426]

I can't remember... Clay who was it that finally got that MAC Truck coming to your shop? It must have been a heck of great guy

[@KoonTrucking]

That would be you sir! Mac Daddy was too scared of the camera 🎥

[@jrpremiumtoolsllc8426]

@@KoonTrucking I need to get back down there and see you guys

[@KoonTrucking]

@@jrpremiumtoolsllc8426 anytime you ready? Or we can meet half way in Nashville and have a dang good time

[@gregcothrum4045]

Great video y'all have a great one and stay safe 👍

[@RUIZ44]

NEW FOLLOWER🎉

[@KoonTrucking]

Awesome. Thanks

[@BassWhoopinFishingTeam]

What Milwaukee stuff you gonna sell? I may be interested if i don't already have any of it.

[@KoonTrucking]

I will sell it

[@Taylor98564]

How is that new 12 volt DeWalt impact holding up for you? I just ordered the kit from my Mac guy.

[@KoonTrucking]

I just got it yesterday?

[@Taylor98564]

@@KoonTrucking for being a 12 volt tool man she's got some power.

[@VDC_EDC]

Love the video and wish I had a MAC guy in my area. Did you get the new brushless ratchet from Snap-On yet? If so, do you like it so far?

[@KoonTrucking]

I am going to wait on the long neck to come out. I just like the long neck better

[@redmesa2975]

We don’t have any MAC dealers in Western Colorado. I’ve ordered the RBRT extractor set, from the website for the 3rd time . MAC keeps canceling my orders for some reason. Last 2 order attempts were phone in orders. Not impressed with customer service at all !

[@KoonTrucking]

That sucks

[@KoonTrucking]

If you have trouble this time shoot me and email I will get em to you

[@skyb5937]

I need a rbrt catalog

[@Angel.S.96]

Milwaukee m12 is 100ftlbs and and smaller

[@KoonTrucking]

Guessing you missed the part of I’m trying to get out of Milwaukee since you can’t keep the dang batteries in them and I’m sick of sending them off

[@richardbates2367]

Snap on cordless tools are getting ridiculous even for the refurbished ones....

[@kuruptprez21]

I gotta say I have been completely pleased with all my Dewalt/MAC tools except for this 1/4 impact. So far has been my only disappointment

[@chrissoderberg5063]

Other red crap lol with the numbers that Mac has what ru really paying for

[@SideGigSquid]

Who ended up winning the green box?

[@KoonTrucking]

Richard Down

[@martinschaffmeir7729]

I liked everything I saw, but that's just me

[@markpeterson6836]

Old Joe isn't gonna have a reason to stop by if you don't need to warranty all your Milwaukee!

[@KoonTrucking]

True!

[@jasonvredenburg4839]

Dewalt built that impact... Get the same thing for half price

[@danieltubbs458]

I literally drove 30 minutes out of my way to meet up with my Matco dealer today to make a $100 payment only to add another $91 onto the truck account in a Father’s Day gift. Essentially I made a $10 payment

[@dalebennett5227]

Does he ship out state. i live in Ohio

[@thenoodleguy5481]

Watching from New Zealand,why don't you show as much SNAP-ON tools?

[@KoonTrucking]

Well cause he ain’t got much inventory that’s why!

[@markgriffin5537]

I hate the paddles on them ratchets worst than anything. Why can’t you put a button on the side, top or anywhere else thats not gonna pinch you hand on a lot of jobs.

[@IronHorseHD]

Milwaukee is like the Amish. Once you leave. You are not allowed back. You made a great mistake

[@KoonTrucking]

Ok ….. I get so much use out of it when it being sent off waiting for Joe to make them actually fix it.

[@TWR358]

4th?!?! WTF??

[@flyguy23]

LOL

[@jaredkracht5950]

I figured out why you had so many issues with Milwaukee stuff it’s that you clean your tools too good I’ve had to send 2 things in for warranty in 5 years 1 was cause I dropped it off the roof of a Peterbilt sleeper mine only ever got dry rags or brake clean to knock the slime off I will say though I just discovered tub o towels when I was cleaning up stuff I was selling after I got hurt and can’t be a mechanic and they work really good

[@KoonTrucking]

Yeah Tub O Towels work! My issues is battery coming loose

[@nuclearexplosion5841]

First!