Tap to unmute

NEW BUILD! Ramp Truck Car Hauler EP 1 Halfass Kustoms Collab

  Рет қаралды 285,205

Make It Kustom

Make It Kustom

Күн бұрын

Пікірлер: 930
@Huskiedrive361
@Huskiedrive361 2 жыл бұрын
Having been a heavy truck mechanic for over 40 years I'm really looking forward to this build! I'm sure you want to remain with IFS, but if you chose to use a beam axle it would be easy to widen the front end without changing the frame width significantly. Just a thought. Looking forward to the next video and have already alerted several friends to the build. They are now subscribers too!
@charlesirby9222
@charlesirby9222 2 жыл бұрын
Same thoughts I had, your'a good thinker! 😜
@johnheard2814
@johnheard2814 2 жыл бұрын
Better off and much easier build go back to the original frame!!! Get ahold of Ian Roussel he can steer you in the right direction for the build your wanting to make this into!!!
@65cj55
@65cj55 2 жыл бұрын
@@johnheard2814 Yes, it was stupid not keeping the original .
@fasteddie4294
@fasteddie4294 2 жыл бұрын
I agree also its gonna have to have a straight axle. Probably need some really big wheels also
@dreamerdave5499
@dreamerdave5499 2 жыл бұрын
With Brent there I would nt put it past them to narrow the cab😆
@kurtludwig6962
@kurtludwig6962 2 жыл бұрын
Wow eyes bugging out. Fantastic project. And including Brent.. kool guy !
@mikepandelos9090
@mikepandelos9090 2 жыл бұрын
I love to watch Brett work you can learn so much from that guy
@MakeItKustom
@MakeItKustom 2 жыл бұрын
Yeah I can’t wait to work with him!
@glenryan6569
@glenryan6569 2 жыл бұрын
DD SPEED SHOP mounted a winch to the floor of his shop and it seems brilliant for towing in all the heaps to work on.
@carportkustoms5764
@carportkustoms5764 2 жыл бұрын
Love it. But this width issue doesn't just affect your steering. Having such a narrow chassis with so much side over hang is likely going to make it feel super unstable with a lot of body roll around the corners, especially if on air ride. I would honestly consider making new cross-members and widening the chassis to improve stability.
@danpoole9327
@danpoole9327 2 жыл бұрын
Cab and chassis chassis are 34" wide. That's industry standard.
@poelmeister
@poelmeister 2 жыл бұрын
I agree with Carport. Mind you, if there’s two tonnes of haul on it, it’ll be even worse. And looking at the design, that weight won’t be sitting low center either.
@danpoole9327
@danpoole9327 2 жыл бұрын
Semi trucks that haul 80,000 pounds are build on a 34" wide frame....
@carportkustoms5764
@carportkustoms5764 2 жыл бұрын
@@danpoole9327 what's your point? Semi trucks have more rigid frames and are built for the added weight, torsion etc. Regardless of whatever point you're trying to make, widening the chassis will improve stability.
@cato9tales141
@cato9tales141 2 жыл бұрын
@@carportkustoms5764 He's trying to muffle you. :)
@iancunanan4161
@iancunanan4161 2 жыл бұрын
The long wait is over.... Ive been iching to see this project since you show it first....its gonna be rad😍🥰😍🥰😍🥰
@r1lark
@r1lark 2 жыл бұрын
Two of my favorite builders working together -- this will be epic for sure!!
@barryrollins2728
@barryrollins2728 Жыл бұрын
Brent will definitely be a plus for your build! I've watched so many of his videos and wow what a builder of anything! North Carolina USA
@zenithmosaic
@zenithmosaic 2 жыл бұрын
Been following Brent for years and just picked up your channel. How amazing you guys are working together on this one!
@snoopu2601
@snoopu2601 2 жыл бұрын
I found this channel through Brent he gave Karl a shout out and glad he did because Karl does some amazing work and learn a lot from both of them. Bad Chad to he. Work's fast, a lot of people don't like his work but he gets stuff done and fast.
@owenwalters7186
@owenwalters7186 2 жыл бұрын
YESSSS!!!!! SOOOO Excited for this one. Thanks guys
@kevind5508
@kevind5508 2 жыл бұрын
What would look good is a set of super singles like what Brent runs on his General crew cab truck. Going to be an awesome collab!
@mikedmt
@mikedmt 2 жыл бұрын
I was going to say the same thing. It would help fill those wheel wells, that's for sure. I think the C30 frame or whatever it is might be a touch too narrow for that beast of a cab
@rustysparks8645
@rustysparks8645 2 жыл бұрын
Truly................................................................Awesome.....................................................Project. Will be great to see you & Brent collaborate on this build. It will be like his build of 'The General - but on Steroids'. 👍👍
@StreetTruckinTitan
@StreetTruckinTitan 2 жыл бұрын
Where's the Caddy? Was looking forward to that one!
@chriswhiteside8829
@chriswhiteside8829 2 жыл бұрын
Hey boys it’s just a thought don’t forget it’s got to go under the roller door on the way out also halfass is one of the best 🇦🇺👍
@fitzeesfabrications
@fitzeesfabrications 2 жыл бұрын
Cool build. I always thought about one of these builds. I always looked at school busses for a frame and suspension. Some are cab over design and have a wider track wide. The frames are straight and long so wheel base is unlimited. Thr steering box your after is from a step van or just a chevy van. They have a different box setup then a pickup. Going be cool Brent is in on the build. Right guy for a fast build. Watch both you guys religiously. Can't wait till the next one
@MakeItKustom
@MakeItKustom 2 жыл бұрын
Yeah a school bus would be pretty amazing there’s so many possibilities keeping some room in the front for storage or sleeper or slightly camperized! I think this frame is too narrow man LOL there are better chassis out there
@fitzeesfabrications
@fitzeesfabrications 2 жыл бұрын
@@MakeItKustom that's fun part of project. Figuring it all out.
@dannmohr5721
@dannmohr5721 2 жыл бұрын
Looks like an interesting build and now the “Half Ass” is joining the build……this will be epic………👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@troyweatherford9874
@troyweatherford9874 2 жыл бұрын
This is going to be a great project!
@douglasschmitt6645
@douglasschmitt6645 2 жыл бұрын
Sweet! Can't wait to see this hauler finished with the baby Buick on the back!!
@srtautoworkz
@srtautoworkz 2 жыл бұрын
My two fave youtubers collab to build an awesome rig, can't wait follow this one ..spent my childhood helping my grandpa in a truck like this, tons of great memories, same color too!
@MakeItKustom
@MakeItKustom 2 жыл бұрын
No way? That’s pretty cool! Such a neat looking trucks back then
@davidblake1542
@davidblake1542 2 жыл бұрын
Love this stuff !!! Thanks Karl 👍👊😎
@TheToolmanTim
@TheToolmanTim 2 жыл бұрын
Three minutes into the video and I'm already hammering the like button! Can't wait to see this collab with Brent.
@texasPD1911
@texasPD1911 2 жыл бұрын
Think about using a RV frame, might make it easier ! Old ones are cheap too!
@EngineersGarage1
@EngineersGarage1 2 жыл бұрын
COE, ramp truck and air ride checks all the boxes! Stoked to see how this one comes out
@philjohnston9616
@philjohnston9616 2 жыл бұрын
WOW !!!!! . WOW.... I definitely need to see how this is done. You certainly enjoy a challenge. Awesome idea !!!!
@richardarthur8191
@richardarthur8191 2 жыл бұрын
Karl this is gonna be interesting seeing you and Brent working together on a project. I following Brent and it is amazing how he does things. Watched him build his General. Can't wait to see the project finished.
@lorenmeyer5290
@lorenmeyer5290 2 жыл бұрын
WOW now that's a cab! Awesome guy's!!
@Ipschnug
@Ipschnug 2 жыл бұрын
Awesome collaboration! I've been amazed and motivated by watching Halfass Kustoms for the last few years. The amount of work he gets done while also having a full time job is mind blowing.
@MakeItKustom
@MakeItKustom 2 жыл бұрын
Right?! I’m blown away as well LOL he’s a different breed
@mikescudder4621
@mikescudder4621 2 жыл бұрын
The guy doesn't sleep!!!
@petermacinnis5686
@petermacinnis5686 2 жыл бұрын
The motor home chassis is a great idea accomplishing what you need and leaving the one ton chassis for a future project.
@garyprice8490
@garyprice8490 2 жыл бұрын
Can’t wAit to see this progression take place I’d imagine that you’ll widen the chassis for stability don’t you think? This is a fantastic project!! Can’t wait to see what you all come up with!
@kristiankristiansen133
@kristiankristiansen133 2 жыл бұрын
Had the same idea🙃
@MakeItKustom
@MakeItKustom 2 жыл бұрын
You’re definitely correct that it is not wide enough. I think we are going a different way
@Sotarn81
@Sotarn81 2 жыл бұрын
John from Sweden here. I am in to restore old vehicles as well but as an amateur. I’ve watched all of your videos and I love every one of them. This one is going to be really interesting. Keep up the good work!
@adamschewe7166
@adamschewe7166 2 жыл бұрын
Well my two worlds just collided 😂. Been watching both of you from the start. I honestly fill my nights with both of your channels! I’m so down for this project, and collaboration. This is going to be killer
@cowfrank
@cowfrank 2 жыл бұрын
This is too cool! These two are the best.
@MakeItKustom
@MakeItKustom 2 жыл бұрын
Right on Adam! Yeah I’m pretty excited to get to work with Brent for a whole week! I feel like we can probably bang a lot of work out.
@jimbojones101
@jimbojones101 2 жыл бұрын
Mad to see you collabing with Brent. I love his channel . . . new to yours tho so we will see but if your a pal of his I am sold!
@xozindustries7451
@xozindustries7451 2 жыл бұрын
Cool build, I built a ramp body car hauler on a f600 chassis. Those 1 ton frames really aren’t heavy duty enough to handle the weight of a full sized car, if you stick with a little hot rod you should be fine, also brakes aren’t really up to the task, plus stretching the frame makes the turning radius horrible. I know people do it, but when I built mine I wanted to drive cross country with no problems.
@glassblastcollision
@glassblastcollision 2 жыл бұрын
I think he's trying to use sentimental value of his dads trucks into the build ,If he boxes the frame it should be fine. I'm sure if you spend some coin you could up grade the rotors,calipers and drums.
@CFairNH
@CFairNH 2 жыл бұрын
Such a cool build! Can't wait for the colab with Halfass Customs!!
@bigdaddy741098
@bigdaddy741098 2 жыл бұрын
The rendering looks sweet... I'm not quite sure how you're going to get that little toy chassis to match and look anything like it though lol. Are you sure you aren't going to regret getting rid of the original chassis that actually kinda slightly looked somewhat Exactly like the perfect dimensions because it was... you know.... Designed that way? Although that would probably be too easy for you lmao
@pauldionne1665
@pauldionne1665 2 жыл бұрын
I thought the same thing. The weight on the front axle exceeds what the one ton can carry, even with air suspension. The cab will have to be cut to fit the frame.
@deanmesserer3554
@deanmesserer3554 2 жыл бұрын
Yep what I would have done as well but we'll wait & see how it pans out.
@tomjones5974
@tomjones5974 2 жыл бұрын
OG chassis looked good and only 15k miles. Drop twin turbo LS in that puppy. Boom.
@Red9GearHeads
@Red9GearHeads 2 жыл бұрын
Can’t wait to see this one when finished! Stuck break drums? Zip wheel and an air hammer. Take er apart in chunks. Pretty quick that way.
@noobFab
@noobFab 2 жыл бұрын
This is an AWESOME project - so much cooler than the average bolt-on special. Really excited to see where you take this and whether you'll put any custom aesthetic touches on the styling?!
@MakeItKustom
@MakeItKustom 2 жыл бұрын
Yeah I’m pretty open to ideas on that I think that the light bar will be coming off of it as well as the search Lights. Definitely going to add as much style into the bed as possible. Also will be building a custom front bumper
@noobFab
@noobFab 2 жыл бұрын
@@MakeItKustom Nice! Hopefully those hideous mirrors will be coming off?!? With the light bar coming off, it's really going to change the shape of the cab - flattening it quite a bit and making it look quite boxy. Custom fabbed mirrors could either allow you to really double down on the squareness or add some contrasting curves maybe? The custom bed sounds really cool - the roof overhang behind the cab could be something really cool to play with too. A place to build in a custom toolbox and wich housing, maybe more?
@DustyMacsGarage
@DustyMacsGarage 2 жыл бұрын
Enjoyed this video!!!! Im excited to see how this build takes shape!!!!! I will be watching!!!
@murrayandru7527
@murrayandru7527 2 жыл бұрын
This just Might Be an EPIC collaboration here !! Get Busy Guy's
@shaunokeefe4943
@shaunokeefe4943 2 жыл бұрын
I started watching these videos awhile back and just realized I live 3 doors down the street from this shop. Lol can’t wait to follow the progress
@brunocoutant4204
@brunocoutant4204 2 жыл бұрын
Yes, this new project is really interesting. Lets go. Bruno from France.
@OGRocker1
@OGRocker1 2 жыл бұрын
Glad to see I'm not the only one that plays musical shop a lot😆🤣😂🤗
@gazza6348
@gazza6348 2 жыл бұрын
G'day mate awesome..you and Ellie work well together so adding Brent for some more flavour will be epic brother 👍👍🇦🇺🇦🇺
@terryeustice5399
@terryeustice5399 2 жыл бұрын
Think with Brent’s Fabrication and yours. It’s going to be a awesome rig. Thanks for sharing!
@herbiederby3394
@herbiederby3394 2 жыл бұрын
Karl I was always wondering about the cabover wow that would be a amazing build .....ITS FINALLY HAPPENING...lol..😆👍🙏
@markbutler6634
@markbutler6634 2 жыл бұрын
What an awesome, Low milage truck, Far out!
@alanpaulick7815
@alanpaulick7815 2 жыл бұрын
Guy's this was really a fun video you made me laugh so much. I know that you will get this build looking good. Thanks for sharing this good times video
@RogerM88
@RogerM88 2 жыл бұрын
You should consider placing the engine below the deck, with some side fans for extra cooling. Adding a top panel hatch for access.
@Jackshock94
@Jackshock94 2 жыл бұрын
Nice jobs Carl 👍. I can't wait to see what next step to custom chassis install the engine, suspension and everything nice fit on that fireman truck..
@alanhicks3361
@alanhicks3361 2 жыл бұрын
H I Karl. Great content and work . Really looking forward to you and Brent working together on this one will be a great show and build . Two completely different styles and great ideas. Also like to add you two do the best videos I find informative and interesting. Alan hicks 🇬🇧
@brianmcpeek651
@brianmcpeek651 2 жыл бұрын
Yes Yes Yes looking forward to every video you do on this Beauty!!
@raymondrudino1471
@raymondrudino1471 10 ай бұрын
I have a 68 c40 in decent shape ran when I bought three years this is exactly what we want to do .thanks for these builds inspired for sure
@rgs4x
@rgs4x Жыл бұрын
I drove a Rescue vehicle with that exact same cab with a 6V92TA diesel. It was a screamer!
@thefreeak
@thefreeak 2 жыл бұрын
The term for the relationship between wheel centerline and balljoint/ spindle pivot axis is "Scrub radius". This thing is SICK.
@bigalsvwratrod7346
@bigalsvwratrod7346 2 жыл бұрын
Awesome design idea. Can't wait to watch the transformation
@geneschaffer4123
@geneschaffer4123 2 жыл бұрын
Very cool build ! Way to keep us watching Karl!! Probably not the only subscriber that would like to see your brothers Chevy truck BBQ when he gets it done!
@rockerpat1085
@rockerpat1085 2 жыл бұрын
Put The Back Wheel In The Front And The Front Wheel In The Back With The Other Dulley Wheel And It'll Look Right!!! Keep Rocking!!!
@bruceaskin9645
@bruceaskin9645 2 жыл бұрын
Heres another option , split the cab through the center, make it fit the chassis. But personally I would widen the chassis
@timhipkins7188
@timhipkins7188 2 жыл бұрын
I love what u do Karl! Weight distribution will be a problem. If the engine is to far back the truck will not want to turn under load.
@shanehack871
@shanehack871 2 жыл бұрын
Oh this has to be the best collaboration on KZbin by far!
@davemoulding8799
@davemoulding8799 2 жыл бұрын
I watch both of your channels and this is going to be fun to watch , kick ass you guys are the best on KZbin.
@briandrake9467
@briandrake9467 2 жыл бұрын
I had 84 Monaco camper, original 454 with 48k miles, a p-10,? The cab forward steering was interesting it was cheap, I even raised my kids in it for a bit... A coe cab and a airstream trailer mounted, to make 50s dinner/food truck. Was a old dream..
@briandrake9467
@briandrake9467 2 жыл бұрын
Love the content...
@briandrake9467
@briandrake9467 2 жыл бұрын
Now I'm a traveling car salesman..
@chungi1614
@chungi1614 2 жыл бұрын
“KARL CAR HAULER” insane project so looking forward to you working your magic and with Brent as well….. killer project!!!!!!!
@penguinbrand
@penguinbrand 2 жыл бұрын
I kept seeing the cabover in your videos hoping you would build it. I'm excited to watch and I'm sure it will be SO COOL!
@rona1144
@rona1144 2 жыл бұрын
This should be really good. Collaboration with Brent 👍
@khb3892
@khb3892 2 жыл бұрын
I found this channel through Brent, you're right he's an animal when it comes to building a project.
@1b9e7n3z
@1b9e7n3z 2 жыл бұрын
As always will do the things looks amazing, something very big coming,good luck
@burthurt8365
@burthurt8365 2 жыл бұрын
What a cool project . Wish I was there wrenching with you . 👍
@tintat2
@tintat2 2 жыл бұрын
Cut that front crossmember and the center link in the middle ---and from the lengthening place forward widen it a foot or so. ---Love your videos! Thx.
@americanfamiliesfirst2790
@americanfamiliesfirst2790 2 жыл бұрын
Straight axle in the front, step notch rear and front. Mad freak street build.
@patreisinger142
@patreisinger142 2 жыл бұрын
So cool to watch 2 brothers in sync!
@poolmotorrepairguyFL
@poolmotorrepairguyFL 2 жыл бұрын
Jay the Florida pool pump motor repair guy. When Service Calls Longwood approved ! that was good info 2 know /see👨‍🔧good job !! MIK
@lonmcclellan2414
@lonmcclellan2414 2 жыл бұрын
You are Mr KZbin... you make everyone feel like we are right there with you.... great job...
@corydriver7634
@corydriver7634 2 жыл бұрын
Oh man! My two favorite Canadians are going to co-lab on a build! Sensory overload Dude! Looking forward to this build for sure!
@gazza6348
@gazza6348 2 жыл бұрын
G'day mate awesome dude been waiting for this one ever since you first showed us ages ago ..cool to have Brent in as well top channel he has there ..man I'm glued to this one buddy ..thanks 🙏🙏👍👍🇦🇺🇦🇺
@jasonhull5712
@jasonhull5712 2 жыл бұрын
Definitely a.. Ambitious project. Yeah, that's a perfect description. Let's dig in lol 👍🍻
@tylerseabook9423
@tylerseabook9423 2 жыл бұрын
This is gonna be beautiful where is Christina and her Cadillac? Haven’t seen that in a while
@irritantno9
@irritantno9 2 жыл бұрын
Came to ask the same question
@hotdogbri
@hotdogbri 2 жыл бұрын
Looking forward to seeing what your do, i think we know but its going to be fun to watch...hi from the UK.
@rickska5437
@rickska5437 2 жыл бұрын
Nice to see that cab getting love. Maybe split the front crossmember and widen it? My buddy narrowed a Jag front end and put it under a 50 Chevy fastback. Just a thought. This build is gonna be killer!
@fonhollohan2908
@fonhollohan2908 2 жыл бұрын
You need to get yourself a old farm tractor so you can haul shit in and out of your shop. Looking forward to the rest of this build should be a great build. Yeah gotta, keep that ole phone and have it installed in the truck to work. What an excellent Truck, its a total gem. Most of these things in canada have been hauled to dumps and crushed. To have something like that an for it to be in such great shape is an awesome opportunity so you can give it, another life as a Ramp Truck Hauler is totally awesome. You only have to make a couple modifications by the looks of things. She's looking excellent thus far. LOL Can't wait to see this project unfold.
@m37cdn
@m37cdn 2 жыл бұрын
Karl, you will be fabricating mostly all new crossmembers for the frame anyway, why not widen it ? You would have more room to tuck the engine between the frame rails. Another thing to consider is custom A arms for the front suspension, you could make them wider and have more room for the airbags....
@jimrky6062
@jimrky6062 2 жыл бұрын
This is so cool! TWO of my favorite Canadian car channels working together! Whoo-hoo! Monster build.
@David_11111
@David_11111 2 жыл бұрын
Karl its your channel and its great we are just along for the ride :) do your thing ... but more :)
@jackhume4532
@jackhume4532 2 жыл бұрын
Wow, that truck certainly is going to be an interesting project to follow on you-tube and until part 2 TaRa for a bit.
@darrellpodbevsek7774
@darrellpodbevsek7774 2 жыл бұрын
Looking forward to this build. I have a 1964 Ford N600 that I have been wanting to make a ramp truck out of. I'll be watching for ideas to steal from you!!
@DatBoiOrly
@DatBoiOrly 2 жыл бұрын
i honestly couldn't stop laughing when you tried every trick under the sun to get that drum brake to free up which it would have been easier to just dismantle it and take the shoes out
@66jonnylingo
@66jonnylingo 2 жыл бұрын
Looking forward to this one👍🏿
@SilverC8andDroppedC10
@SilverC8andDroppedC10 2 жыл бұрын
Very cool project! When I think of GMCs I expect to see 4 headlights. Double headlights would be a nice touch.
@jeanlawson9133
@jeanlawson9133 2 жыл бұрын
Your tip is loose I seen flames around the nut...😎 I stand corrected a big welded big bar thingy looking forward to seeing what you do here...
@vanblindguy4600
@vanblindguy4600 2 жыл бұрын
I thought I was the only one to notice at 11:58 probably why it was acting weird when he first fired it up.
@ghouliesgarage3922
@ghouliesgarage3922 2 жыл бұрын
Looking forward to seeing this & Brent from Halfass kustoms he definitely has skillz
@drscrib99
@drscrib99 2 жыл бұрын
Love this new project Can't wait for the next video
@timweidner3335
@timweidner3335 2 жыл бұрын
Holy Stub Nose Mr. Fisher! Very cool concept.
@MICAHFEY
@MICAHFEY 10 ай бұрын
Love the channel. Helped me a lot on all of my projects. Thanks for taking the time to put the videos together. I know how much effort making videos takes
@BuildSomethingAuto
@BuildSomethingAuto 11 ай бұрын
28:00 I always keep a spray bottle with water in it near me when I'm welding or cutting for exactly that reason 😅. Also helps to cool off parts in a hurry if I need to and I'm not worried about warping. Handled the little fire well though! Good thing the floor dry you were using wasn't very flammable.
@paulhedman7387
@paulhedman7387 2 жыл бұрын
I love it. This is going to be a hoot to follow.
@keithwallington4966
@keithwallington4966 2 жыл бұрын
good call brent iv been watching your cab standing out there thinking wow thats going to be a good project
@BestKaylee
@BestKaylee 2 жыл бұрын
You do great work and I really enjoy your channel. I just want to mention that at 12 minutes it shows a gas leak base of the locking nut on your cutting tip. Keep up the good work.
@MrHandyDad
@MrHandyDad 2 жыл бұрын
Love that CoE Cab. Killer deal received did you.
@ME-qq3gr
@ME-qq3gr 2 жыл бұрын
Looking awsome. Can't wait too see more of the project.
@docdetroit146
@docdetroit146 2 жыл бұрын
Everyone should have a wedge car hauler.
COE Ramp Truck Car Hauler EP-3 Mounting The Cab Halfass Kustoms Collab
52:58
Day 1 NEW BUILD! Parts, Ideas, Mock-up GAME PLAN 1932 Plymouth 4x4
1:01:32
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
We got a 1968 C50 ramp truck project
19:20
David Newbern
Рет қаралды 100 М.
Bump Starting Old Iron with @ziptiesnbiasplies
29:47
DEBOSS GARAGE
Рет қаралды 299 М.
It WILL Run.
1:32:10
SimonFordman
Рет қаралды 1 МЛН
I bought a 1949 Wagon and tried to drive it 2,164 miles home
25:43
Casey LaDelle
Рет қаралды 388 М.
De Tomaso Pantera Stored For 33 YEARS! Will This GARAGE FIND Run Again?
2:15:59
Vice Grip Garage
Рет қаралды 3,4 МЛН
Man Builds AMPHIBIOUS Vehicle from Old Car Parts! | by @DonnDIY
26:34
Quantum Tech HD
Рет қаралды 15 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41