If my wife could see me watching this now she would be changing the bank account number and password!
@user-wp2ts1wf6j Жыл бұрын
I changing wife 😂
@joleghost Жыл бұрын
Did u finally buy it?
@Sasquatch30517 ай бұрын
😂😂
@damon3232 жыл бұрын
That’s seriously a dream setup you got there sir! Excellent work! You set all this up yourself?
@mikedeschner74385 жыл бұрын
On my wish list and to do as soon as I retire.
@2littledogs5584 жыл бұрын
Wow, all this from a hundred primers in the primer tube !!!
@cosmiccharlie82943 жыл бұрын
Slow and steady gets it done!
@piplup102038542 жыл бұрын
This is a dream setup for sure :D if I could have this and enough components to make like 500 a month or something I’d be pretty happy with that ☺️
@Jake-vc1jd Жыл бұрын
500 a month is really low for an automated press. Maybe a couple thousand rounds a month minimum.
@moraessilvio5192 жыл бұрын
Dude is therapeutic.
@WiIdbiII3 жыл бұрын
It's like Willy Wonka's factory , but for men. Can I be a oompa loompa there?
@georgehamilton60634 жыл бұрын
Good start, need more on reloading, and componets
@uralbob14 жыл бұрын
I guess my beloved Rockchucker ain't much these days ;-(
@cyanidetrece3 жыл бұрын
It'll still rockchuck when the power goes out. 😁
@hogu4134 Жыл бұрын
Don’t know why, but this is so satisfying.
@bpkayser Жыл бұрын
Fascinating to watch
@cutedoggo44192 жыл бұрын
Thanks for the video! it helps me to fall a sleep ♥️♥️ asmr mark 7 ♥️
@SimeonIvanov3 жыл бұрын
0:04 - Two and a Half Men in the background :D
@joejeans79133 жыл бұрын
I see your on the 2nd fastest setting why not the fastest? Id like to get a manufacturing license about now during this pandemic. you've got the right Idea. I shoot about 20k rounds a year. been always buying factory ammo. excellent set up and video showing us your operation. mind me asking some numbers? How much to get this set up and how much per round (9mm)buying in bulk for 50K rounds a time? enough for my son and I for 1 year. a a time.
@theguy15064 ай бұрын
probably reliability and noise, as someone who does 3d printing (not the same thing but a machine conducting a process) the faster a machine is going, the faster parts wear out and the more likely something is to go wrong, by going at the speed he is, he probably goes fast enough for his own needs without sacrificing reliability in any way
@Mellow842 жыл бұрын
Music to my ears
@citytrooper13 жыл бұрын
Can it do the same thing for 223/556?
@nenoneno28492 жыл бұрын
What’s the price on that machine
@whitesites7 ай бұрын
Just curious if you were to max out all the hoppers how many rounds could it make before it would require human intervention to restock either casings bullets primers or powder
@user-wk3es5py8q2 жыл бұрын
نريد ثلاث قطع منها .مزيد من التفاصيل عن العمل والاسعار
@potgieterhuis14694 жыл бұрын
1:43 1646 rounds per hour, not 2100. 454 per hour less than advertised, not taking into account any stops
@georgeascione88614 жыл бұрын
The press is set for 2100 rounds / hour but I have a pause on the down stroke programmed in to make sure I get a full powder charge and I have set the software up to proportionally slow down the index speed to keep from spilling powder. For 9mm set at 2400 rounds per hour I actually am running at 1360 because the index speed of the press is set to 10 which makes indexing slow enough not to spill any powder. If you set all the trims to zero the press runs at 2400 round/hour, which is what I do when I deprime and size only.
@MiguelRBLX-GeneralOfATPM8 ай бұрын
As A Guy Who Operates A Dillon 1050 Loading Press I Want To Have This So My Hands Ain't Always Tired Anymore
@J1Z06 Жыл бұрын
This is awesome !!
@JTW362743 жыл бұрын
Its been three years since this video was made, tell me how its holding up mechanically.
@georgeascione88613 жыл бұрын
Perfectly, see it now kzbin.info/www/bejne/nprVh3eLnZysmq8
@Lmrutledge6 жыл бұрын
All has been ok with not using a powder checker? I'm not convinced I need one either. I'm not going to Stand there and look inside each case either. Your opinion or input? Thanks
@LukasDubeda5 жыл бұрын
I'm not sure on the 1050 as I only have the 650 with Mark7 autodrive, but I had a batch, once, that I forgot to put the charging rod back in for the powder measure and ran the press for about 50-70 rounds before realizing they had zero powder charge. I contaminated my good batch of about 2000 pcs with these fucked up rounds with no powder. I now call this batch my "fault training" batch and take it out only to courses and training sessions as I occassionally have an empty case with a primer push the bullet to the barrel. Not enough to cycle the gun and certainly not enough to allow for the next round to chamber, so, it's somewhat "safe", but overall, I'd recommend using the powder check. Not for accurate amounts of charge, but as a safety check that the round actually has powder in. Especially on the 1050 where you have the available die slots (don't reload anyting in one pass with an autodrive, that's my other recommendation).
@brettmarquez5623 жыл бұрын
Is it possible to get enough components currently to even operate a set up like this?
@georgeascione88613 жыл бұрын
No, but I have enough stock of components to last me for a while.
@SM-cg2dc6 жыл бұрын
That’s awesome, but doesn’t that take the fun out of it? I actually find reloading more relaxing than shooting.
@georgeascione88616 жыл бұрын
That is why I have the second manual 1050. I get my share of fun reloading rifle and special pistol loads.
@Tay-ky3fi3 жыл бұрын
i think the fun is in shooting the darn stuff
@AmericanaWoods3 жыл бұрын
Porn isn’t allowed on KZbin... sounds like the everlasting gobstopper machine.
@brandontuiono174310 ай бұрын
How much is that set up
@pctube35 жыл бұрын
What is the cost as it is with all the add on's
@georgeascione88615 жыл бұрын
See response to Joe about a month ago below.
@thegoodfriendsnetwork5 жыл бұрын
So with the cost of this machine plus all he reloading material needed.... no one has made a video if this is worth the price and time to make 2100 an hour. I presume you sell the reloads? how much does that make you justify the cost and time? I'm interested in getting to sell ammo so this interest me a lot.
@georgeascione88615 жыл бұрын
I don't sell ammo. To sell ammo you need a manufacturers license and I am a 01 FFL. Besides the cost of the liability insurance is prohibitive. You cannot apply a cost benefit analysis to this purchase, at least not for me. Like many things in this sport including the vast array of firearms I own, it's about want not need. Everyone makes purchase they don't need but want at some point in their lives and that is solely based on the affordability of the cool item you want. For me I purchased these pieces incrementally which doesn't make it cheaper, just spreads out the cost. Even though I go through tens of thousands of rounds/year personally, there is no justifiable reason to run 2100 rounds/hour at least not for me. It does cut down on the repetitive boring nature of reloading bulk ammo, and it does save on tennis elbow for sure. But even without a justifiable reason I still like it and it is a productive tool. Besides, I also let many of my friends bring over their bulk supplies and reload. Its a social event as well.
@AvtarSinghAvtarSingh-uu3pv7 жыл бұрын
Very.good
@CHIBA280CRV Жыл бұрын
Sweet , saving up for the mark 7 . Do you feel it’s better than the Ammobot ? Thanks 👍🏼👍🏼👍🏼👍🏼👍🏼
@georgeascione8861 Жыл бұрын
I don't have any idea, I don't know anything about the Ammobot.
@Lmrutledge5 жыл бұрын
How difficult was it to get the Swage sense set up correctly? Thanks!!
@georgeascione88615 жыл бұрын
Not so difficult but it was time consuming. Once you get it installed its pretty easy to adjust
@Swetch857 жыл бұрын
What type of bullet seating die are you using? Does it hold on the micrometer or do you have to adjust it often?
@georgeascione88617 жыл бұрын
It's a Redding Competition Seating Die and yes it holds the setting perfectly, no adjustment needed. It's repeatable as well for different loads.
@62dobie7 жыл бұрын
George Ascione, how do you judge your crimp? For instance,if it does not fit in case checker would you apply more crimp till it would go in and out easily or do you have a different method? I asked because he looks like that may be a Sheridan round checker in the video.
@georgeascione88617 жыл бұрын
So I actually use a caliper and measure the crimp. I compare it against a factory crimp on a particular round which is consistent with the published reloading data for a round. When you reference reloading data on-line they always give you the case length, case diameter, crimp diameter and a few other measurements. That's what I go by and have not had any problems with my rounds. I do use case gauges to check rounds occasionally to make sure nothing has really changed.
@carlb866 жыл бұрын
I use a bullet puller to ensure that the crimp isn't cutting beyond the coating on the bullet, since if so it is exposing lead and deforming the round. I target for just enough crimp to prevent setback.
@johnsta834 жыл бұрын
Sir - Sounds like the mr bullet feeder powder funnel is sticking to case. Have you figured out how to fix that? I am having the same issue. Isn’t causing problems just super annoying!
@georgeascione88614 жыл бұрын
Actually there is sticking and it is on the powder funnel, (not the Mr. Bullet Feeder) for the powder drop. I have solved that problem. I am right now working on a new video of reloading 9mm brass with many press improvements, one of which is the total elimination of the funnel sticking. While all the manufacturer's literature say what I did should not be done, I have managed to solve that problem with 100% reliability in belling the case and have enjoyed nearly 100% reliability dropping a bullet on the case with the Mr. Bullet Feeder. Stay tuned, that video may be out as early as this weekend.
@johnsta834 жыл бұрын
@@georgeascione8861 Awesome! Any luck on getting that video up? This issue is driving me nuts.
@georgeascione88614 жыл бұрын
@@johnsta83 I published a new video, if you want to just see the powder drop fix it's around 12 minutes in. You can check out just how smooth the press runs towards the end of the video. Sorry the link is here kzbin.info/www/bejne/nprVh3eLnZysmq8
@usinasolarbrazilphotovolta96044 жыл бұрын
$?
@shaku21825 жыл бұрын
May I ask how much there is variation in O.A.L in reloaded ammo? Between shortest and longest cartidge in typical 9mm batch of ammo. Thank you.
@georgeascione88615 жыл бұрын
I don't have actual numbers off the top of my head but I can tell you that the automated press is significantly more consistent when it comes to OAL. In my opinion this is due to a consistent stroke and pressure that does not change as opposed to manually pulling the handle which can give you inconsistent stroke and pressure.
@shaku21825 жыл бұрын
Thanks!
@SuperiorDefense6 жыл бұрын
Looks like 1600 rph to me. Why do you have clutch set at 5? Mark 7 auto drives are incapable of anything over 1800 without a ton of problems and that's with keeping your processing separate from your actual loading.
@easypeasy96036 жыл бұрын
Yup, indexing is on 4 and that's what brings it down to mid 1600s. I have my clutch on 6, as I run it w/o brass lubing (for a reason).
@InsanityMediaProductions4 жыл бұрын
Where can I buy one? I'm sick of being told "Were sold out" of 9mm Luger. If someone here in MI can donate to me I'll get one of these machines and run it and make the AMMO be available for people.
@miroslavkuchta7102 жыл бұрын
2100 or 1644?
@huracan2001732 жыл бұрын
why does it say 2100 rounds per hour but then it says 1645 rounds per hour?
@georgeascione88612 жыл бұрын
That's the speed the press would run at, but I have some other dwell parameters set to help load 9mm shells with no spillage. I have a bottom dwell set for a second to allow complete emptying of the powder funnel, and I have the advance dwell set to give a smooth motion to the case advance to stop any powder spillage. With these dwells it slows down the actual production. If I remove all the dwells in theory it will run at 2100 rounds/hr.
@huracan2001732 жыл бұрын
@@georgeascione8861 gotcha, and even then 1600 rounds per hour is a lot haha no need to risk spillage to get an extra 500. Just run it 20 more min and that's it. :)
@foxglow67982 жыл бұрын
I…. I wanna eat ‘em
@matteedstrom Жыл бұрын
But i timed it ... and it only reloads 1730/hour^^
@Randy_844 жыл бұрын
Seems really slow for 2100 rounds/hour
@Novagunner3 жыл бұрын
1 round every 2.5 seconds
@ipscjoe2 жыл бұрын
That bum bump noise the powder belling die is making is terrible….
@renaissanceman58474 жыл бұрын
worthless when the government quietly stops retail sales of primers...