Massive Snap-on tool haul!!! 🤙🏼🏝🍻

[@ToolDemos]

G stands for gangsta!

[@PowerStrokeJude]

Lol

[@scottaddison8071]

Orange is beautiful

[@PowerStrokeJude]

Ehh, orange os ok, j/k. Thanks for watching dude 🤙🏼 🏝 🍻

[@scottaddison8071]

@@PowerStrokeJude Dude, you’re just Green with Envy because the Orange Looks so Nice!!!

[@scottaddison8071]

@@PowerStrokeJude if you saw my Macisimzer 6127 & my Macsimizer Cart, both Fireball Orange w/ Chrome Trim, then you would be a changed Dude!!!

[@PowerStrokeJude]

@scottaddison8071 to be honest, I've said in the past that if green wasn't an option, I would probably go orange.

[@scottaddison8071]

@@PowerStrokeJude tbh, if orange wasn’t an option, then I would want to be Like Power Jude

[@260Jake]

Great video Jude! I am going to have to hook up for a live sometime i just moved out of my trailer into an MT45 Freightliner. Ready to sell more tools baby!

[@PowerStrokeJude]

That's awesome dude congratulations! Sell them tools! I livestream on Thursday night again. I'll be doing Saturday nights again, too, pretty soon

[@Schmitty71]

Badass haul dude 😎🤙🍻

[@PowerStrokeJude]

Thanks dude 🤙🏼 🏝 🍻

[@BlindBatG34]

The CT9038 has become my goto impact. The CT761/861 works great 90% of the time but it doesn’t have the beans for truck lugnuts and sometimes hard to get into tight spots. I love that the 18v impacts remember the power level for forward and reverse so you can have full beans in reverse and low torque on forward without having to change the power level when changing direction.

[@PowerStrokeJude]

Currently I use the 861 as my go to. I still use the 761 for lighter duty jobs like running boards when pulling cabs and other small jobs. I'm probably going to take the 761 home, make the 861 my lighter duty gun and the 9038 will probably be my go to.

[@bigpuppytools4295]

G'day, great tool haul, G on part number is for Green I would think, and you brought bit set because it's green🤣 Thanks for sharing, have a great day.👍

[@PowerStrokeJude]

@bigpuppytools4295 correct on both accounts, and thanks for watching the entire video dude 🤙🏼🏝🍻

[@scottaddison8071]

I love everything except the Swan Lake bit set. Mac 121 pc RBRT bit set is the best

[@PowerStrokeJude]

Thanks, dude. RBRT is a quality tool for sure. I have an RBRT torxset, and I like it. Grip Edge is good stuff, too.

[@ragincajungarage]

Your tool dealers are definitely awesome

[@PowerStrokeJude]

Yup, I agree 💯

[@briongates2900]

lol i assumed coke this whole time... Love the content!

[@PowerStrokeJude]

Sniff sniff sniff 🤣🤣🤣 Thanks for watching dude 🤙🏼 🏝 🍻

[@CountryMileGarage]

Great tool haul bud 🤙🤙🤙

[@PowerStrokeJude]

Thank you Theo 🤙🏼🏝🍻

[@8power0]

THAT WAS SOME SOLID SNAP ON TOOLS .............. THE BEST THANKS FOR YOUR TIME THAT WAS MIND BLOWING 👍👍👍.

[@PowerStrokeJude]

Thanks for watching, I appreciate the support. I'd say that was one of my better tool hauls. 🤙🏼🏝🍻

[@PowerStrokeJude]

You can still order the Brute from Snap-on

[@tonycroteau9264]

Great video 👍

[@PowerStrokeJude]

Thanks dude 🤙🏼 🏝 🍻

[@techstalkingshop497]

Can't wait

[@PowerStrokeJude]

🤙🏼🏝🍻

[@NutsandBoltswithTone]

Nice to haul Jude. That Ball Joint kit looks really nice

[@PowerStrokeJude]

Thanks Tone

[@Kdavis795]

The ball joint press is absolutely awesome

[@PowerStrokeJude]

@@Kdavis795 yup, best on the market imo. Thanks for watching

[@edtheoldtechguy]

Nice Haul! Gave it a second watch for the algorithm. Also bro that impact has me jelous 😅

[@PowerStrokeJude]

Thanks, Ed. I'm hoping it gets decent views

[@antonioorozco4896]

Nice haul, hombre.

[@PowerStrokeJude]

Gracias hombre

[@hurricaneatp]

Hands down best ball joint kit on the market. It just works awesome. If you do a lot of Hondas there another adaptor for the newer accords and Acura sedans that works great. I want to say it’s the bjp1-29a. Great video dude. Love the tool haul videos.

[@PowerStrokeJude]

Thanks dude, I appreciate it. I'll check out that adapter for sure. 🤙🏼🏝🍻

[@silentstryker1590]

Green

[@PowerStrokeJude]

@silentstryker1590 nailed it, thanks for watching dude 🤙🏼 🏝 🍻

[@rickyringel1562]

❤ The Green💵

[@PowerStrokeJude]

Me too, but I'm sure you could tell by watching the video, lol

[@dinomares5697]

Nice Good job love you From Dino Mares Fontana CA Snap on pink tools

[@PowerStrokeJude]

Thank you

[@philchristmas4071]

Can't go wrong with snap on. Nice pick up.

[@PowerStrokeJude]

Thanks dude, I agree, you can't go wrong with Snap-on 🤙🏝🍻

[@westcoasttools5179]

Jude, any tips/ recommendations for tools for someone just starting out on diesals? Also what are your must have mac tools? Thank you

[@PowerStrokeJude]

You'll need a good compression guage/tester, a good high torque impact (maybe start with air IR is solid), and a good torque wrench. Tell you what, give me a little time, and I'll upload a video of the top 5 or 10 tools needed when starting off as a diesel tech. I'll give solid brands to start with and what to eventually upgrade to. As far as Mac tools. I'd say to get their 4 piece pry bar set when they have the bogo going that will give you the 36 inch pb for free. Get the precision torque wrenches when it's buy the metric and get the sae free. Get the antivibe hammer set when they give you the dead blow hammers free. I appreciate you watching my content dude 🤙🏼🏝🍻

[@westcoasttools5179]

@@PowerStrokeJude I really appreciate this reply I’m in school for automotive and heavy equipment technology and I want to make sure I’m prepared for the industry. I look forward to the video and I really appreciate the help.

[@PowerStrokeJude]

@westcoasttools5179 I'm glad to help dude

[@scottaddison8071]

@@PowerStrokeJude what is the best set of drill bits in your opinion?

[@PowerStrokeJude]

@scottaddison8071 I'd probably go with the Hyper Steps, just by how everyone raves about them. I'll probably get a set soon. As for the best I own, that would be the Mac 29 piece set that all sizes have warranty. I still have a high opinion for Irwin drill bits too. You can't go wrong with them either

[@gilmansgarage6341]

Nice haul Jude..I picked up the 3/8 impact to , no G on mine though Gun metal or Gray 😀..

[@PowerStrokeJude]

Thats awesome, how do you like the impact Howard

[@gilmansgarage6341]

@@PowerStrokeJude haven't really worked it a lot ..but I like it so far..

[@PowerStrokeJude]

@@gilmansgarage6341 same here

[@PowerStrokeJude]

@@gilmansgarage6341 do you have a CT9050

[@gilmansgarage6341]

@@PowerStrokeJude yes 9050 & 9080..

[@TalkinTools]

I finally caved and bought the BJP-1 master kit the last time it was on sale in the flyer too! Just a heads up if you didn't know seeing you are PowerStroke Jude lol, there are certain year F250/350's that need an additional cup thats not included for the upper ball joints, as well as a certain cup thats not included for F250/350/450 and I think 550 track bar ball joints. I think that Honda kit may actually have the track bar ball joint cup I'm talking about

[@PowerStrokeJude]

Thanks for the heads up, dude. I'll check the catalog to see if I'm missing any adapters that I might need in the future and have Roscoe get them for me

[@TalkinTools]

@@PowerStrokeJude No doubt! I just looked at my bill and the track bar cup part number is BJP1-22A and I think thats in the Honda kit you bought. The ball joint cup I was talking about is part number was BJP1-51A

[@Tcorellis-j6d]

So this is the famous power stroke Jude I see in FRM streams!!??! Hey man what’s up !!! Good to see another HD tech if that’s the right word to use sorry if it’s not but what’s up!!!also sorry if I got the wrong guy but either way what’s going on?!? How’s the heavy duty life

[@PowerStrokeJude]

Yeah, I pop into FRM livestreams from time to time. I work mostly on Power Strokes doing engine work, so I'd consider that HD or MDHD, lol. Not much going on, just enjoying the weekend. Thanks for checking out my channel. 🤙🏼🏝🍻

[@Tcorellis-j6d]

@@PowerStrokeJude yeah man was searching up tools/tool box tours and this video came up good stuff !!

[@PowerStrokeJude]

@user-rr4hr7bz7n thanks dude, I appreciate it

[@speedwrench1909]

Hey Jude, Great Video. I have the same ball joint press. I was the first guy on my Snap On guys route to buy one. It was pricy at the time, but I promise I have made my money back a 1000 times over. Did Snap On send you your royalties check yet?

[@PowerStrokeJude]

Yup, I know that it will for sure pay for itself. I saw yours in your toolbox tour on Lindsay's channel. I think I need to email Snap-on again to find out about my royalties check 🤙🏼🏝🍻

[@shannondickenson8294]

Great haul.. expensive but that bj press will last a lifetime. What some ppl might not realize is the cheaper presses dont have the add on adapters thats needed in the industry. Most diy guys/girls probably dont come across the varieties like you do... great video thanks for sharing...✌️

[@PowerStrokeJude]

Thanks dude, and that is a great point too.🤙🏼🏝🍻

[@bluefj-wc3vz]

🤘

[@PowerStrokeJude]

🤙🏼🏝🍻

[@montevallomustang]

I have the bjp1 and its the greatest, and it is the only way im changing ball joint or ujoints

[@PowerStrokeJude]

💯 Jesse, thanks for watching. It's been a while, how have you been doing dude

[@anthonygm85]

Damn 2 minutes in and you got to the impact wrench I asked about thank you for spending my money powerstroke jude

[@PowerStrokeJude]

🤙🏼🏝🍻

[@marko11kram]

The "G" stands for GREAT, so of course it won't suck.

[@PowerStrokeJude]

The G stands for Great! My Dude, Heck Yeah!!!

[@EzTechJoe]

I would get Snap-on 18v tools if they actually had a different 18v battery option for the "stubby" Impact. It's more of a compact Impact Wrench more than a Stubby with that big 18v hooked up with it. Still nice though

[@PowerStrokeJude]

Yeah, I like it. Now I have something in-between my CT861 and my CT9080. I appreciate you watching dude 🤙🏼🏝🍻

[@EzTechJoe]

@@PowerStrokeJude no doubt. I might it one of these days just because lol

[@russellpottenger8584]

@@PowerStrokeJude Although I love my CT9080 (you probably work on bigger stuff than I do) my CT9050 is my go to, ….. and in green. 😋

[@PowerStrokeJude]

@russellpottenger8584 both are great tools, especially in green

[@Chad-em2fg]

I think snapy’s other battery platform is 14.4 volt. I’ve not seen any 12 volt batteries from snapy.

[@PowerStrokeJude]

Yeah, it's 14.4v. You're right. I misspoke. That being said, it's 14.4v fully charged with no load on the battery. As soon as you pull the trigger, there is a voltage drop, and an efficient battery should perform at 12v. I read that a while back. Thanks for watching my dude 🤙🏼🏝🍻

[@ToolinAround2025]

Are you a little nervous? That could cause your nose to run, from adrenaline, norepinephrine or something.

[@PowerStrokeJude]

I never even thought about that. To be honest, I didn't know that was a thing. Thanks for watching dude 🤙🏼 🏝 🍻

[@manningbudd]

How’s that 3/8 impact treating you

[@PowerStrokeJude]

Great dude, It's becoming my first reach really fas. Thanks for watching dude 🤙 🏝 🍻

[@manningbudd]

@ do you know anybody that runs the 9080 1/2 inch one by chance

[@PowerStrokeJude]

@manningbudd I run the CT9080 too. It's heavy but it's a badazz impact dude. I have a few videos up featuring it in action and a review video too. If you don't mind how heavy it is i absolutely recommend it

[@manningbudd]

@@PowerStrokeJude I’ll def check out them videos thanks

[@PowerStrokeJude]

@manningbudd of course