MATHEWS V3X 29 BOW BUILD

[@4doutdoors961]

55:30 "K we're in the target" Me every shot from 30

[@ElkShape]

Can finally show it off!! 🤘29 is a SHOOTER

[@michaelabercrombie5744]

That's cool seeing y'all over here too!👍🏼

[@stevecrader3479]

Ha Ha Ha watched yours then came over here, Life is Good!

[@floridaboyfishing0672]

I recently got my first bow, I have been practicing a lot and have gotten my group at 20 yds to around the size of a subway napkin folded up, your content has inspired me to get a bow and enter the sport of archery

[@silvermediastudio]

Get some instruction next. Easier to build good technique now than to fix bad technique later.

[@jayonez137]

Awesome, best of luck to you. Let the addiction begin 😂

[@jayonez137]

@@silvermediastudio 100%

[@cooperrogers9076]

I am going to start using "folded subway napkin" as a standard of measurement. Thank you. Lol

[@olivierbernatchez5525]

Kimmikka okok mais ko😊ok0o0o9ko😊k😊o😊k009k

[@GBBLGBL]

Thanks for the carbon bar cut tip Chris! Was "literally" just asking my dealer this exact question regarding my current Landslyde because I didn't ant it sticking out the back of the riser simply for the aesthetics. Also, awesome the Landslyde and the multiple drillings to adjust the entire gang.

[@MrHip76]

Ive had this bow since last December and it has been the best shooting bow I have owned. 7 Deer with it so far. Love it.

[@jakebeast3006]

Would love to see an arrow build. Great vid tho!

[@kylefrye6265]

That’s a beautiful looking bow and I love the integrated sight mounts! Way to go Mathews!

[@jayonez137]

Love Chris’ bow build videos. I shot the V3-31 last year and loved it. I ordered the V3X-29 last month. Can’t wait to set it up. Went with the Hamskea Epsilon rest. And I ordered a set of GAS Ghost string. I’m not a fan of stock Zebra strings. Never shoot them. But I do set them up and tune and Paper clip them together as a back up set when I go on my Midwest hunts.

[@silvermediastudio]

From my experience in other applications, yes, allowing paracord and other synthetic cordage to burn makes it become brittle when it hardens. Better to kiss it with the flame and bring it to melt together gently.

[@CumberlandOutdoorsman]

Today I handled one of these bows. The one thing I noticed right away was how much heavier it was as compared to my Mathews Ultra Max. For a hunting bow I am still partial to the older Mathews bows simply due to their overall smaller size and less weight. At 70 lbs. my bow will shoot relatively heavy (470 grains) at around 285. There is some hand shock, but I don't mind. I'm sure these newer bows will shoot, and draw more smoothly without any hand shock.

[@nolanstafford7476]

Killer as always man! Absolutely love the Mathews community as a whole and hope to be a part of that team one day 🙏🏻🙏🏻

[@dodge088]

Great video man very informative. I've been shooting bows for several years and I travel all over the country for work and I've never seen a bow shop that will go through all this. They pull them out of the box slap some parts on them and hang them on the rack. Ultimately it's up to you to sight it in and get it where your comfortable, most shops around oklahoma and arkansas won't even paper tune one with you. I've been looking at a new rx5 for sometime but I know what a hassle it is trying to get one setup.

[@greenwald007]

I just got into bow hunting, didnt want to get too deep money wise so my local bowshop had an old Hoyt Rampage new in the box I picked up. Setup everything out the door was 350 (drop away rest, sight ect.) So far Love just target shooting with it so may have found a new hobby.

[@jons7e]

I'm impressed with how quiet that bow sounds. Really want to try the 33

[@thor1087]

They should add a machined guide for the degree down stabs on the front. Get an etch at the 12 o'clock of the washer and a line on the QD so that when you tighten you can line them up and you don't have to eye ball it.

[@wyattmcneill2178]

Just picked up my V3X 29 today absolutely like the feel of the bow in the hand, it’s super quiet and incredibly fun to shoot.

[@dillonwalling]

G5 blu glue works great for those outserts.. I shoot the same arrows but only downfall is once they’re glued on they on 😳

[@DD-jn1mp]

I am getting one of my coworkers into archery...I haven't shot in a year but I am excited that he is excited to learn!

[@uutzy]

He seemed happier when you received the Hoyt RX-3. )))))

[@danielmarshall4587]

Thank you for these vids, it's like a meditation sat watching you setup your bows.

[@lukustroyer3731]

Chris just rips into the unpacking of the bow, new bows I get in I’m scared to even remove the bow from the packaging lol.

[@braydenf2229]

Was at school today and checked the Mathews website I saw a new bow and here’s the vid 😁 thanks Chris

[@thedudenico3064]

Dude I want this bow so badly for three reasons! 1. It has an X 2. 29ATA is my favorite ATA 3. Bow pressing string.

[@ajkelley_]

Awesome video! In an upcoming video could you show a side by side comparison of a V3 with a quiver on and a V3X with the new quiver? It would be great to see how much closer to the riser it is. Also, you touched on the sound of the new bow in the video so what about a comparison between the two. Again thanks for all of the great content!

[@editundo]

Million allen wrenches and you'll still never have the right size when you need it.

[@nmredneck5645]

Just picked up this one a couple weeks ago, really happy with it. This video really sealed the deal for me

[@theloneangler9866]

Nothing better than coming home from a long day and seeing Chris posted. Keep up the great work.

[@RoguePatriot]

For top hats always move the cam in the direction of the tear for left/right. “Shootin left, move it left”. That’s how I seem to remember

[@JeffGonzales]

Love to see you do a vid on the adjustment of the windage and balance and where the scope need to be to fix the extreme left issue of the integrate mount. The camera man had a difficult time capturing that part

[@wcwcgarner2717]

The hamskea epsilon works great. That's what I shoot on my v3x 29.

[@C-24-Brandan]

Awesome bow technology right there! Mathews & PSE have really stepped their game up this year. Their designs, quality & looks are the best in the business right now! Keep Killin' It

[@thereaper3575]

Check out the new prime many people are leaving Matthew's behind because of how well it shoots

[@C-24-Brandan]

@@thereaper3575 Yeah I've heard good things about it & all the reviews on it everyone seems to love it.

[@thereaper3575]

@@C-24-Brandan I'm picking mine up tomorrow hopefully 🤪I'm shooting the nexus 2 rn and don't really want to upgrade but the inline looks to good not to 😂😂

[@C-24-Brandan]

@@thereaper3575 nice nice that'll be a fun day of shooting ect, congrats on the new bow!

[@thereaper3575]

@@C-24-Brandan thanks bro have a nice day and good luck with the rest of deer season.

[@erickhernandez5316]

Best on KZbin right now ! HANDS DOWN !

[@alexbetts452]

The bow looks nice I’ll have to stick with the traverse for draw length limits of the new bow. Side note…I had the same issues with the vap arrows/outserts. tried multiple glues and methods.. in the end the arrow flight was great and I did take one whitetail with them.. it just wasn’t worth losing inserts in targets and constantly having to maintain the issue as I love to shoot often. I’v since settled on Easton axis 5mm with the iron will ss collar and Easton brass insert. The iron will collars are bomb proof

[@ianfortier5775]

Had the same issues with Black Eagles. The outserts would pull out. I ended up going with the Ethics inserts with sleeves and haven’t had an issue.

[@jamesashley3827]

2 bows 1 inch longer ?I will give the sight mounting 100%, quivers 75% great video personally I don’t like the hump in cam system but Mathews makes a good bow

[@georgej.6485]

Ordered a 29 murdered out V3X today! Can't wait!!

[@ninoparrinello5942]

Hey Chris, I'm a michigander myself and i love the content ur creating. I have a question about something you said in the video. If i buy a bow off the Mathews website, is there no up charge on the attachments i choose to customize my bow with? Thanks and good luck to you for the rest of your season

[@ep3389]

I got a mathews vxr, after the first month of shooting it the limbs started creeking the first time I would pull it back. I brought it into my dealer he thought it was fixed, it wasn't. Took it back to him and he had to send it in to mathews this time. It wasn't doing it after that, but after a month it was creaking again! At this point it was almost the rut and I wasn't going to miss that waiting for my bow I spent 1400 on. At what point do they stop trying to fix a problem and realize you can only put so many different limbs on a bow b4 you realize that's not the problem

[@wubaru]

Yep i am one of those that lived under a rock but moved and a buddy is helping me get into bow hunting. Also, everyone must do a shot of booze every time “Literally” is mentioned 🥸

[@johnlee8123]

I just bought the 29 a few days ago. I love it. What advantages does 4 fletch have over 3?

[@reaganriddle]

Stabilizes fixed blade broadheads better.

[@ninjamagic5150]

I just picked it up. Have no idea how to adjust the M. Sight. Maybe you should do a full video on the sight original new mathues groove sight..I adjusted a little bit..but wasn't sure what did what. 🤔 I seen the pin after loosing it that rotate moves independently each pin u want to move so what way is up what way is down to rotate to get your arrow on target. Left and right seam close. Otherwise sick build awesome shop. And I'm happy with it..just need help figuring it out..I got all m. Parts like you. And bolt on quiver. Is awesome I didn't know they had the pop off. Like yours. But it doesn't bug me on off.

[@bigghinz5784]

Honest question. Isn't the dove tail most useful to align the sight housing with your peep at full draw? If that's true why do you just cut it off mid way?

[@ViewIndepth]

Dont cut your sight. Unless you have sponsors that send you them for free. You will not be able to sell it on the used market.

[@ViewIndepth]

also good point bigghinz

[@bigghinz5784]

@@ViewIndepth I wasn't so much worried that he cut his sight bar, you can do whatever you want with your own stuff haha. But he it seemed like he just stuck it in somewhere in the middle and called it good instead of using the adjustment for his peep. He is a way better shooter than I will ever be so I am genuinely curious.

[@erickramer4580]

Where can I get a scope rod like the one you're using. It seems on my accutouch no matter how tight the screw and nut are there is still some sight movemeant in my scope. Im just using the rod that came with my sight. Im running the UV3XL. Thanks

[@stevie9361]

I had to go way right with my landslyde in my 33 to get it shooting dead on. I just used my click micro adjust. Now I still have about 1/4 of micro bar on the right an 3/4 on left.

[@willceely22]

I built a mission riot by Mathew’s and it’s one of the best bows I’ve used

[@rylandrummonds]

Awesome setup. That thing is SILENT!

[@BodyEliteSystems]

Sweet looking bow and awesome video!! Ordering mine tomorrow. -Jeremy

[@TheCCConcrete]

Excited to see your 33x build. Just shot the 31 today which I loved, just need a little more draw length.

[@georgecafasso4483]

how did u shoot a 31 i thought they only released 29 and 33

[@oldben1800]

29 axle axle would be very nice, Im tall and my VXR is 28, I love how compact and the shorter it is the better it is in wind, but one inch would prolly make a nice difference

[@jeyana2543]

What is your draw length

[@oldben1800]

@@jeyana2543 30

[@dristonlouis]

New Mathews Bow + Chris Bee = instant like.🤝🐝

[@jayonez137]

Cut that dovetail with a cut off wheel on a grinder then you can just hit the outside edges real quick to bevel it and make it look like it was always meant to be. Very similar to an arrow cutter wheel.

[@joelfletcher1773]

Can you please give us the details on your arrow setup? I shoot the Victory VAP TKO as well and would love to achieve the 450gr mark. TIA. LOVE YOUR CHANNEL

[@jakebeast3006]

I would love to see an arrow build. Got my bow set up but not sure what arrows to run this year.

[@ajkortz8632]

Did you have to buy a bracket for your axcel sight to make up for the windage to the right when mounting in the center?

[@TylerHunt556]

Saw a comment on doing a video on arrow builds and I would also like to see that. What arrow setup you use for whitetail hunting would be awesome.

[@jacobwilliams4979]

are you still able to use the traditional sight mount instead of the dovetail sight?

[@brucequinn4240]

Yes you can.

[@jacobwilliams4979]

@@brucequinn4240 thank you!

[@bassmassterchamp3]

First video I came too! Pumped for it!!!

[@SellsZac]

Chris, not sure if you'll have the answer to this, but is there a specific axcel single pin that'll fit in the new dovetail slot on the V3X 33"? The two they market to sell with the box are both multi-pins.

[@airenthusiast2000]

They should be degrees marks on the Quick disconnects and on the riser where it mounts.

[@donsnider5117]

I Agree That Looks Like A Killer Bow I mean Is That The Fastest Production Bow On The Market ,If Not What Would You Recommend

[@dhooter]

Ever heard the Mathews no cam? Forgot how quiet bows used to be before the hatchet cam craze. The old camless Hoyts all you heard was the nock coming off the string

[@transmission612]

Will the Hamskea Trinity work on this bow with the low pro removable quiver? Also will Black gold pro with dovetail mount work on this bow? Want to transition my old accessories to new bow.

[@matthigdon4809]

Could you use the low profile quiver with like a Spot Hogg Grinder?

[@fredtheslaya]

Keep the bow builds coming please!

[@brodiemizer519]

If you were 18 and short on money... would you buy the v3x for the extra features or buy the v3 at a cheaper price point since it’s a year old? Basically what I’m asking is if the features are worth the money.

[@aaronbuehler1270]

Not the same exact boat just a month ago have 28 inch drawl links but I’m having problems with my nose not touching the string. Wondering if you had the same issue if so, what did you do to remedy it?

[@bryanslittlegarage5724]

Can you tell me what the grip helps with? I find with the stock grip my v3 31 is really sensitive to torque it. I loved the wooden grip the best.

[@pumpkinman1963]

Excellent instructional review video. Very detailed explanations.

[@simonaudet1107]

Hey Chris! Don't check timing when seting up a new bow?? Breaking it first?!? Great build up video as usual, keep up the great work!!!

[@royhoglund1322]

Great bow build! What bow vice are you using? My old Last Chance Archery bow vice won't hold my Mathews V3 31.

[@draganmlakic4616]

Beautifull bow. Excellent presentation

[@ClipCraze212]

Awesome bow! Nice video man!

[@sweatwaterfishing519]

Hey there Chris its Chris here i have a personal choice question and it is " i have purchased an Elite ritual 30 which i absolutely love but im not bias to other companies or other models but im curious to know why there isnt more big name shooters using more Elite's? " thanks in advance love your channel keep up the good work.

[@justpassinthrough7]

Great video, digging the new features. If hat 33 starts collecting dust let me know.

[@burket.8648]

I can’t be the only one who saw Chris kill a massive elk on the Mathew’s proving ground preview... when’s that vid coming out👀

[@jarradpredmore7012]

I was unable to watch the whole video, but did you have to utilize the offset block made by Axcel to achieve enough windage on the Landslyde? I ran out of right windage and had to order the offset block.

[@sethstriegel4682]

Let’s go buy one of these

[@julianisrael6451]

LETSSSSSSS GOOOOOOOO. Mathews on top this year! Keep up the hard work Chris!

[@MarineLuke99]

With the same bow as last year? Ok

[@tonynuttz8427]

Love the bow! Enjoyed the build but ready to see you in a tree slingin arrows at some bucks.

[@justpassinthrough7]

My arrows just dropped 3 inch at 30 yards. There is some play in the string. How much play should be in the string before it is taught when drawing?

[@dougpeterson5285]

Is that the uv3 or the uv3xl on your V3x video build?

[@darvinknepp]

Hey Chris does the quiver, arrow rest and things come for the $1199 thanks

[@maxhallemann7058]

Have you thought of doing an arrow build video with the VAP TKOs, I'm sure you get this question allot there what I shoot and I'd love to see how a pro sets them up!

[@tonyallen9131]

You forgot to show how the quiver has got room to fit the limb at full draw dew to it been so to the riser, it's going to be near impossible to go past a Mathews bow now.

[@zo64life6]

Great stuff Chris. Really enjoy your videos. keep hammering!

[@tjsondelski84]

Is there a way to mount the quiver bracket on for a non mathews quiver like a tight spot that’s if you put your sight in the new Bridge lock system

[@DB.KOOPER]

That top-hat washer on the V-bar goes against the riser Chris... Not under the cap head bolt. Look at the directions.

[@jeremiahmodgling6859]

Is it better to shoot with a release or by hand? When it comes to accuracy ?

[@leelatt]

Just picked up this bow last week. Never had stabilizers on my old PSE, how do I determine what size stabilizers to use?

[@lifeatfulldraw7163]

Always move the cams with the tear. Right tear. Shim cams to the right.

[@overall2139]

Thank you for adding the part where your v bar is set at.

[@chrisochoa1222]

What's your draw length Chris I must of missed it. Also for lean you follow the tare... Tail left add lean, tail right follow and stand cam up straighter. Any reason you went to Victory from Eastons?

[@Mike-ul1xn]

how did you get that landslyde to work with the bridgelock without the windage bracket?

[@garrettheapy7254]

Chris what peep do you recommend when using the ultra view with the axcel bar? I’m gonna go down and probably end up buying the V3X 33 tomorrow. I know that the black gold sight doesn’t fit into the matthews riser and I usually shoot a black gold pro sight but I’m honestly thinking about trying a set up like you run. it’s always been something I’ve been interested in but just haven’t had the motivation to try it and I think I want to try it now.

[@briangodfrey7706]

Are you seeing any string stretch after initial setup with the factory strings?

[@KennyB9871]

That thing is sick!

[@skintharp6790]

Do you think it is worth upgrade from a V3 or a VXR

[@garrettheapy7254]

Hey Chris what size is your uv3? XL or standard?

[@robertlislegard520]

What are the hocks and those lumpy things at each end of the string for?

[@codymarshall1052]

Are you running the uv3xl or just the standard uv3. I have the v3x and I have ran out of adjustment with the uv3xl but I am running the axcell accutouch pro not the landslide. I am trying to figure out if the landslide will fix my adjustment issues or if I need to switch to the standard uv3.

[@chazzec]

Looking for suggestion, I have the new v3x 29 ..I have a 28 " draw and the bow is camed with 28"/60#/80% let off. Any ideas on what hunting arrows to use ....I do have some axis 5mm match 340 arrows....would like to get in the 500 grand weight area...not to worried about having high speed , ie. Only 60# , so I know I'm limited there...keep the video's coming , their great, funny, and informative 👍👍👍share with all my friends ...thanks ...chazz

[@White_devil1980]

Is a mathews vertix compound bow as good as a Hoyt Maxxis bow?