Mazda Mx5 Miata | PAINT PEPARATION | Pt5

[@more.power.]

"My dad has been gone for many years, and I still miss him and think about him often. It's so heartwarming to see you working alongside your dad on this project. I truly appreciate the effort you put into sharing your Mazda build with us-it's excellent. Thank you!"

[@RobMoore01]

correct about the roof fitment

[@jrushen4235]

Absolutely love this program.

[@patadamson4005]

Great progress. Time for a beer

[@SimpsonsClassics]

Hi to you both really enjoying this series. Do love a mk1 mx5

[@recreativesigns4571]

Good to see the combo at work on the Mazda. Looking great.

[@Solargold1]

Great video, what happened to the classic mini ?

[@badbooks476]

That is the rain rail & yes the roof flap should be sandwiched in between, Sometimes the rain rail is cracked & needs replacing. Edit : Roof drains need carefully Rodding out, I use net curtain wire, drains have rubber flaps on bottom to prevent road sound coming into cabin

[@maxthecaddy8451]

Hard work lads 👍

[@davecooke914]

Good see you bk look forward to nx video keep up great work 👍👍

[@FuManchu5ltr]

Always great to see something you two. Makes my day.

[@kennyyellop]

spot on lads

[@davidrix804]

I would certainly buy that car after you both have worked on it,great job 🙏🙏🇬🇧🇬🇧🍺🍺

[@johntovey3928]

Excellent job ❤️

[@MrNwapp]

More good work, lads; this is going to be a cracking MX5 when you are finished.👍 Re the migraines, and you may have done this already but if not have a look into botox treatment - not the cosmetic variety! Positively life changing for one of my family.

[@marcusd2380]

You boys have gathered a lot of tools together in that wee shed. Them quick jacks look the part for what u do on the channel. Be hand for doing doing brakes etc. and me thing u should do is move that compressor out into a wee house of its own and maybe put a buffer tank on it. Keep the noise down where ur working and keeps the dust out of it

[@FuManchu5ltr]

In regard for migraines, everyone has a cure or a tip, and as a fellow sufferer I have not got much to add. We try everything, we look for triggers and there is rarely a common denominator easily found. Mine are less frequent now. I drink a lot more water. Mostly though I can get an inkling of one happening before they do. Little sensations, fatigue, a small burst of pain might wash through my head in some area. If I can get onto that early when those things happen, with Iberprofin, everything calms down and I dodge a migraine. If I’m somewhere and I don’t have anything with me, I’m screwed and it gets away from being responsive to anything.

[@awjordan73]

I think between the original red and the white primer is a layer of lacquer.

[@johnbaldwin9126]

This is one of the best videos on You Tube,,,we understand what you meant re the cover and it was fitted wrongly,,,hope the migrain goes away,,,regards

[@johndavey72]

Hi Gentlemen . So have you taken the paint back to original or metal ? You'll have problems if you prime on top of coarse d.a marks . You really should flat the finall paintwork with 240 /320 ........l've no doubt you have , but just in case ! I guess this will be a keeper ? Thanks

[@luisangelsotojimenez1257]

Hello, when you don’t used the dust mask, put this in plastic bag if this is carbon activated.

[@johnkinnane547]

G’day love the channel, why didn’t you use paint stripper it’s used by crash repair firms it would be a lot quicker than sanding back to bare metal. Take care regards John

[@luisangelsotojimenez1257]

Adicional, protect you daddy from dust .

[@michaeltrotman6960]

Where did you get your left branch from and were they very expensive

[@cskeise]

🩵👊😎🩵👊😎

[@sunroad7228]

The music has killed it, rendered it unwatchable. Remove and re-upload.