Mercedes Sprinter Campervan - Furniture Build - Part 1

Creating templates and cutting the furniture board to install in our Mercedes Sprinter Camper Van Conversion.
15mm lightweight furniture board is produced by Morland UK
This is a 15mm plywood made up of 9 layers for increased fixing retention.
It's laminated both sides in a huge choice of colours and wood effect finishes.
To view the entire range of plywood furniture board products and accessories please visit-
www.morland-uk.com/shop/vehic...
The coloured T Trim can also be purchased from Morland UK.
Trend Multiscribe - rover.ebay.com/rover/1/710-53...
The slot-cutting router bit for fixing the T Trim can be found on this link-
rover.ebay.com/rover/1/710-53...
Dewalt DWP611 Trim Router -
rover.ebay.com/rover/1/710-53...
Freud Circular Saw Blades - rover.ebay.com/rover/1/710-53...
Disclosure - As an eBay Partner, I may be compensated if you make a purchase using the above affiliate link. Thank you for supporting our channel.
If you have found these videos to be useful to you and would like to make a donation to further content you can do so at www.paypal.me/gregvirgoe
Please do make sure you subscribe and thank you for watching.
#gregvirgoe #vanlife #tinyhome

[@jsfaulds]

This is becoming the best van build videos that I've seen, don't scrimp on the details, when your interested in learning to build something seeing all the details, tips and tricks are good, most videos just gloss threw.

[@GregVirgoe]

Thanks, JF, I'm always conscious of maybe going into too much detail, I had to take a lot out of this one to make it shorter otherwise I know the length of the video can put people off watching it, what are your thoughts on that?

[@Silverback1969MoonLandingLies]

He's the Daddy!

[@JayJay-gj9bu]

The amount of detail is what makes your videos awesome if your videos where 2 hours long i would watch the 2 hours. We can learn so much from you

[@lass-inangeles7564]

@@GregVirgoe Greg, don't shorten them. Every detail is valuable. Yes, it makes for easier watching on shorter videos, but why leave out what is so interesting to your fan base? Every single detail counts! Thank you so much!!

[@lass-inangeles7564]

JF - THROUGH, not THREW. Typos and spelling are the finishing touches on language, just as important as details on a van build.

[@mattkent2651]

Wow the advice even on the timber. So solid advice.

[@GregVirgoe]

Matt Kent I hope it helps everyone understand a little more when they are building what is best to use and where.

[@TheKinlock]

Its a cracking job, its like vanporn

[@GregVirgoe]

LOL only you don't have to delete your internet history each time you watch it :D

[@spazda_mx5]

I think this really is the go-to resource for anyone who wants to do a DIY van build properly.

[@GregVirgoe]

That's really nice of you to say so, thank you

[@peterdufton1067]

Hats off to you Greg and mustn’t forget Lou for all of her hard work too. Always a joy to watch your efforts Thank you 👍🏻

[@roadboogie]

Thanks for sharing! Really helped. Stay well and enjoy life🙏🏻

[@GregVirgoe]

Thank you 😊 you too 👍🏼

[@mattkent2651]

Clamps and T-Squares. My Man.

[@GregVirgoe]

Matt Kent those quick clamps are brilliant it’s like having 6 pairs of hands.

[@davidheron5479]

Excellent video greg 👏

[@GregVirgoe]

Glad you enjoyed it

[@iainroebuck6742]

Yet another great video Greg. This is where the fun starts. This will be the personality of the van. Excellent start.

[@GregVirgoe]

That is very true Iain, I also feel that the little tiny details that you add at the very end are what make it come to life.

[@bradhill508]

I'm looking forward to seeing your van finished almost as much as starting my own van. Every video has just the right info needed... not too much, not too little and attention to detail on things that really matter and are rarely covered as clearly elsewhere. Thank-you Greg!

[@GregVirgoe]

It's great to know that they are both interesting and useful. There's a fine line between too much and not enough, I have cut some out of this too.

[@awahpahpow7735]

Greg thank you for being so clear and concise with your videos! I just inherited a vintage aluminum trailer camper and your videos have helped me immensely!

[@GregVirgoe]

Its a pleasure, is it an airstream or something similar?

[@awahpahpow7735]

Not as nice as an airstream unfortunately. It's a 13' x 7' metal box at this point but I'm so excited to get started on it. It is a 1963 Cree camper trailer.

[@GregVirgoe]

A quick google search came up with this tincantourists.com/wiki/cree/ it looks pretty cool, is it all kitted out with lots of vintage sixties stuff?

[@awahpahpow7735]

It was all original but the frame and walls were severely water damaged from rain and hail. So we gutted it but kept the stove, toilet, and sink. At this point it'll be a full rebuild from the ground up which is why your channel has been so excellent in helping us get started. I want to modernize it but keep some classic elements in the vintage look department.

[@lass-inangeles7564]

As useful for knowledge of existing materials as the How To section as well. Love every video you make! You are a born teacher. Thank you, Greg!

[@hgglass8905]

Hi Greg It's amazing what you have done. Because you are a motorhome couple you will know what works.most van have got things wrong and you wonder what the builders were thinking your work is brilliant.

[@jerrybootneck1736]

Yet another first class Job Greg. Looking forward to the next videos.

[@GregVirgoe]

Thanks very much, Jerry, plenty to come just yet.

[@jpateusa77]

Am I the only person that just likes to hear this guy explain stuff.

[@GregVirgoe]

Jason Pate I hope you’re not alone on that one. 😃👍🏼

[@AmanCreatesArt]

Definitely not the only one. There's a soothing Bob Ross quality to it!

[@smallberries]

Greg, I really admire your attention to detail and forethought. An excellent job on every level. Cheers.

[@GregVirgoe]

Thanks very much Joe, really appreciated

[@Ballynoes]

Another great Video Greg, just the right amount of detail as always... keep them coming.

[@GregVirgoe]

Cheers Edwin, I had to cut quite a bit out to make it short enough not to put people off watching it. What you think when you see the length of a video before watching it?

[@Ballynoes]

Depends on the video Greg.... yours I could watch all day, (and have done lol) others... no comment ;-). The length of the video doesn't bother me if I'm interested in the content, quite the opposite actually. The more detail the better. :-)

[@syncrovanCos]

One of the few channels where I give like on content, even before the video started. 👏

[@giridharg82]

Syncro Van, I share the same sentiment 👍

[@JensGraikowski]

Lol ... Just did the same thing. 😂🤣😂

[@pa_maj.MARTINI-van-MAN]

Yeah, I started doing that too with Greg's channel just in case I forget lol.

[@fjeinca]

Beautiful work, Greg-up to Mercedes standards. Fun to watch your progress, thanks for sharing.

[@GregVirgoe]

I'm too fussy for my own good sometimes :D lol

[@AdamKrenske]

Greg, what I really enjoy about your videos mate is the quality and care you take in everything you do. Really shows how much patience and passion you have for your work. I am only new to woodwork, but it reminds me to slow down when I do anything. Well done! Keep them coming.

[@GregVirgoe]

Thank you Adam, measure twice cut once I was always told. I definitely take longer to do things but most of the time they are right the first time. I try and run the whole build process through my head constantly to try and look ahead and foresee any problems

[@ChristianBjork]

I swear, I'm learning SO, so much from all of your videos, Greg. Thank you so much. I feel like these are some of the best "private" lessons I could've found on woodwork, and all types, really, for when I get to build my van. It won't feel quite as scary, and you better believe I'll be referencing your videos over and over, as I love how meticulous you are (gotta love OCD) and yeah.. thanks!

[@GregVirgoe]

That's really great, its just what they are here for. What van do you have and what are your plans?

[@ChristianBjork]

@@GregVirgoe To be completely honest, I don't have my van yet (please don't laugh too hard! haha) but yeah, I'm 99% I'll get the Ram Promaster, once I move back to the states at the end of the year. Probably one or two years old tops (it's lovely to see the price come down SO much after only about 30-50,000 Km. Quick question, now that I have you around (thanks again!): Do you think it's a SUPEr bad idea to get a used cargo van? It'll help so much to get one, but afraid of the "horror" stories of how they're used in the industry before being sold off. Honestly, though, I'd much rather get that one or two-year old van and have more than enough to outfit it PROPERLY. I really hope to get the type of materials you're using, as well, stateside. I would imagine so, right? Again, you have no idea (well maybe a bit ;) ) how helpful your videos are to people, especially like me. I'm able to get a grasp of exactly what kind of materials and equipment I'll be needing, and it just makes it feel so much more accesible. Thank you, thank you, thank you.

[@ChristianBjork]

Oh, and my plans are to have something quite similear to yours, actually, lookwise... I LOVE your attention to detail and style in the van. I probably won't do a shower or heater, though. I'll focus more on the comfortable furniture aspects and beautiful cabinetwork that you so graciously give an inside look at how to make and so many useful tips. Then, my plan is to just go roadtripping around the U.S. national parks and into Canada, as well. Depending on how everything goes, I might head South afterwards. :)

[@DJRogEurotour]

I could watch you all night. Almost to where I am in my build, just doing wall panels this weekend. Thanks again for your inspiration.

[@GregVirgoe]

It's a pleasure Roger, but get some sleep, you need to rest for your van build :D

[@RandomescuAleatoriu]

best van building chanel i ever seen, atention to detail, technikal info, keep up the great work, ... ty for your effort Greg.

[@GregVirgoe]

Really appreciate your generous feedback and thanks very much for watching

[@philmaggs2248]

Hi Greg If i could like this video twice i would, it's good to see someone taking the time to do a job properly! Very inspirational and informative, looking forward to the next video!

[@GregVirgoe]

Thank you, Phil, really appreciate the great feedback

[@davelee9791]

Another quality Vlog inspiring with clarity many of our own builds...

[@GregVirgoe]

Hoping I can fill in the voids to help those that have not done anything like this before

[@JensGraikowski]

Greg, as always your professionalism is astonishing. Can't get enough of your vids. 👍🏼😉

[@InwardScootersVideo]

I was looking forward to the start of the furniture build. Can't wait to see the rest.

[@GregVirgoe]

Me too, this is the fun bit as it all starts to take shape and look the part. No one's going to say, nice kingspan you got buried in the walls lol

[@yak3u]

Great job !

[@GregVirgoe]

Thank you

[@MuddyBootz]

Best van fit out on YT by far......a pleasure to watch 😀....Nigel👍

[@GregVirgoe]

Really grateful for the fab feedback Nigel :D

[@More-Space-In-Ear]

Ahhhhhh...those knees!! 😎 Great builds Greg, well done my friend...very professional indeed....taking time and rechecking is proof of skill. 🏆👍🏼😊😉

[@GregVirgoe]

Yes, very sorry about the bare legs, not a pretty sight I know lol Working through the days in this heat has been a real struggle.

[@More-Space-In-Ear]

Greg Virgoe I know how you feel mate at least there’s no blood or tears only sweat! 😂😉😊

[@ianfurqueron5850]

Excellent as always, Greg. Thanks!

[@GregVirgoe]

Thank you Ian

[@Mark.McLaren]

I’ve watched you tube for years ... This is one of the best informative and engaging channels I have seen ! Great work mate watched all the episodes in one sitting ... loved every one mate ... Great job ..thank you

[@GregVirgoe]

Thats amazing, thankyou so much I really appricate it. cheers

[@pa_maj.MARTINI-van-MAN]

It looks fantastic Greg, well done indeed.

[@katcankan7129]

A true professional builder. 👏👍

[@GregVirgoe]

Many thanks Kat

[@garyrgjoutdoors5325]

incredible level of craftsmanship Greg im in awe i watch all your vids and rarely comment but i felt i just had to mention how impressive this is you will never be out of work mate im sure any motorhome company would snap you up enjoy your travels in her atb gaz

[@GregVirgoe]

Thank you Gary, so very much for taking the time to comment and give such great feedback. It really makes my day to know that the videos are interesting and useful too.

[@donaldeverett714]

Saw your 'helper' step in to a few frames in order to assist as you as you were trimming the rough edge(s) of the furniture board. She should get more credit. And when you 'ham it up' for the camera, as you did with the furniture board in the rear door, you look like you are thoroughly enjoying yourself. It's good to lighten things up a bit now and then. great work as usual Greg & Co.

[@GregVirgoe]

Haha, yes the electrical lead got caught on the end of the sheet and I was stuck for a second shouting, the lead, the lead! You need a hand with these larger 8x4 sheets. Lou's too shy to be on camera, I'm working on it. I have these daft moments so will include one or two in future lol

[@kevgermany]

Super job as always. Thanks, I'm learning and enjoying.

[@GregVirgoe]

You are most welcome Kev

[@re33ce]

Well done, great workmanship as always, can't wait to see the next installment, 👏👏

[@GregVirgoe]

Thank you very much, wall cupboards are next

[@neilcox1911]

Brilliant Videos and your workmanship is incredible absolute pleasure to watch and learn. I’m going to be starting on my Van conversation soon. Your videos are just the best. Vocally and tips etc top man class 👍🏻

[@MrNdz71]

Greg you are a master craftsman really enjoy watching your videos 👍

[@GregVirgoe]

I am just a home DIY'er really I only starting cutting wood about a year ago I think anyone can do this with a bit of guidance and practice

[@tlschmidt25]

Another great video. Thanks Greg. 🌞

[@GregVirgoe]

You are most Welcome Tami 😃

Hi greg great job well done looking forward to seeing more video thanks for the update and sharing this video and some tips. 👍👍👍🇬🇧🇬🇧🇬🇧

[@GregVirgoe]

Thanks very much, Denis, hope you enjoy the rest of the videos.

[@oldguy5458]

Greg Thanks for the update,, Beautiful ,,, Precise as always,,,,It is apparent to me when you complete your tour and come back to find work,,, You have a couple of New choices,,,,Van build out. Or Dance studio,,, LOL,,, Best Regards

[@GregVirgoe]

LOL hey dance studio, now there's a thought, thanks for such great feedback, loved it.

[@williamdonnelly2705]

Another brilliant video Greg. Thanks

[@GregVirgoe]

Thank you very much William

[@malcolmrowe5031]

fantastic, who on Earth put a thumbs down on it! shocking!

[@GregVirgoe]

Who would do such a thing :D LOL

[@expeditionvehicleadventure2141]

Great job on the details Greg. Appreciate the build.Keep up the amazing work

[@GregVirgoe]

Thank you very much

[@stephenmitchell8324]

hi very nice work cant wate for the next video

[@GregVirgoe]

Next will be the wall cupboards :D

[@Stavrosmct]

You must take for ever to make a cuppa tea, but appreciate the in depth, over engineered process of your build.

[@oldguy5458]

McTaggart Family He has a T-SHIRT that states it will only take 30 minutes,,,Best Regards

[@GregVirgoe]

Excellent reply, made me crack up! lol

[@GregVirgoe]

Yeah, I freely admit it takes me much longer to do anything than most people. I'm one of those, measure three times, cut once guys :D

[@snoman1999]

QUALITY !!!

[@zaziethebeastt]

Awesome videos. Learned some things I'll definitely use on my project.

[@GregVirgoe]

That's great to hear Rolland, glad it was useful to you.

[@worldmusic1401]

Great job! Applause!

[@GregVirgoe]

Thank you 😊

[@kopeducati]

Fab Fab Fab... planning on doing a L4H2 long floor and garage myself... this level of work makes it daunting... but the clarity makes it possible... its no longer the Himalaya and Andes, Still the Mount Everest to climb ... :)

[@GregVirgoe]

I think to do a conversion right there is a lot of work, but just break it down into chunks that you can do on one day and treat each job as a miny goal to celebrate when done. I often stand back after completing one task and go, Yeah that's a good days work.

[@peterwilson8132]

Nice one Greg very imformative and easy to follow,i hope by now you are well into your adventure and are chilling somewhere in Europe. looking forward to the next episode. keep up the good work your inspirational.

[@GregVirgoe]

Not away just yet Peter, Hoping to be by mid August depending on the DVLA and how long they take to get the vehicle class changed. Told it can be 2-6weeks, let's hope its less.

[@Scrambler85]

Nicely done, quality work to be proud of

[@GregVirgoe]

Thank you so much

[@VANESSASVANLIFEJOURNEY]

So professional

[@adamkwiatkowski4107]

Great workmanship

[@GregVirgoe]

Thank you

[@kf-dk5pb]

Another great video thanks Greg

[@GregVirgoe]

You are welcome Paul

[@robpower100]

Nice one Greg looking really good.

[@GregVirgoe]

Thank you Rob, 👍

[@lindahenderson840]

Just found you and subscribed I am going to really enjoy watching you move on with this van

[@GregVirgoe]

Welcome aboard Linda, we are video 31 in this series so you have a little catching up to do :D lol Hope you enjoy the rest of the build

[@knockknockbusted]

Great job, very informative.

[@GregVirgoe]

Thank you Ed

[@courtneyphelps1234]

I love your shirt and great video even in X2 speed. :D

[@andrewduggan4251]

Another brilliant video Greg. I learn something new from every one :-)

[@GregVirgoe]

Glad that you find them useful Andrew, thanks for the feedback

[@BelindaTOV]

Lookin good!

[@GregVirgoe]

Thank you

[@jasoncross2467]

At last a proper detailed how to video, just what I was looking for and made me think yes I can do this. Thanks Greg. P.s could you do a video on all the tools you use please ?

[@dubioushumor9243]

Great video as always Greg!

[@GregVirgoe]

Many thanks, Eli 👍

[@tomrankin2564]

brilliant

[@rainbowvantravel7472]

You my hero, planning layout and materials too...wish I knew you to assist as I'm not so talented with diy... pity your video didn't start from scratch, insulation and tubing was done... but you teach well budd... well done lol

[@GregVirgoe]

Hello Manny, you have come into this series on video number 31 of the van conversion. If you would like to see all the previous videos watch this playlist kzbin.info/www/bejne/iH3akqSYo8SZbNU

[@FineArtVista]

Again well done mate!

[@GregVirgoe]

Thank you Mario

[@flashback9966]

Excellent fit and finish Greg, as I new you would. It takes a brave man to take a jigsaw to those sheets:) I'm presently getting to grips with piano hinges. These new skills you have to learn. . .

[@GregVirgoe]

The key is to have a really sharp blade and to go slow to minimise any chance of chip out.

[@mattkent2651]

Greg, your conversion is truly fantastic. I am just about to embark on this. I will check out Morland Uk

[@GregVirgoe]

Thank you Matt Kent, they do a huge range and great to work with.

[@nickfry9723]

Very nice work👍

[@GregVirgoe]

Cheers Nick

[@ALYDAVIDSON1]

top notch as usual 👌

[@GregVirgoe]

Thank you Ali

[@OpticDevice]

Hi Greg, all I can say is that you’re video series has got to be THE only one that needs to be watched if you want a high end, professional feel to your conversion! The quality of your work is fantastic and the videos are extremely well put together, as well as being super informative. Quick question, did you run a small bead of PVA or something to fix the black trim on the boards? Thanks and I hope you’re enjoying travelling in the van 😉

[@steveh3483]

Amazing quality of work mate watched a few of your build videos as well as the final travel, this could be a new business for you and with the support of your videos the product could command a high price, well done

[@GregVirgoe]

It would be an option Steve, no doubt, but I can now see why they cost so much money. It does take much longer than you think to put together. Any customers would need a lot of patience. 😀

[@mariellelopez7710]

Gorgeous! Any previous doubters about your color selections are eating their words after seeing it going in.

[@GregVirgoe]

Our only reservation was if it would be too dark in there. But being high gloss finish it's like a mirror and the white ceiling and light flooring make all the difference and have lightened up the furniture too

[@Maggiemay1942]

Meticulous as ever - you are simply the best!

[@GregVirgoe]

Many thanks, appreciated.

[@bosse641]

Nice work.

[@GregVirgoe]

Many thanks John

[@johnmaskell1]

Would luv to build a project just like this one day but not enough spare time until I give up work. Well done Mate cheers John

[@GregVirgoe]

Hello John, For the majority of this build I was also working fulltime in London. The only time I worked on the van was at weekends, so it is definitely possible.

[@GaryThomsonJoinery]

Cracking joinery Greg, if you’re in Scotland you’re hired 👍😄

[@GregVirgoe]

No match to the work that you produce mate. :D

[@aroundtheworldinaslongasit4500]

Looking great! Good job! 😁

[@GregVirgoe]

Thank you guys, what's the news on your own van? Last I saw you were taking out the old floor.

[@aroundtheworldinaslongasit4500]

Greg Virgoe lol pretty much like you, been too busy working extra hours to pay for the conversion and every spare hour working on the van, we put the bed in 2 weeks ago and went to Derbyshire Dales for a test run, loved it! Hoping to be done in 5 weeks and head to Europe for 2 months. We've been blogging so lots of catching up to do!

[@topgroover]

Looking very nice Greg. I used 15mm Melamine chipboard just to keep cost down. It works well until the knock in edging needs applying. Then its not the best. Wish i'd have spent the extra on ply now. Still very happy with my results though. Just harder to keep those edges neat and tidy.

[@GregVirgoe]

Yes, you have to have very sharp tools and take it really slowly, I find masking tape helps to prevent chip out. Apply PVA wood glue to the slot to strengthen the fibres before inserting your trim.

[@jasonwilliamson600]

Really helpful info !! Just about to do a double deaker coach 🙈

[@malteweinreich8755]

Nicely done Greg, Well done Mate :-)

[@GregVirgoe]

Thank you very much Malte

[@holom69]

Eres muy bueno!!

[@nellbrown770]

that boarding looks brilliant Greg. must be pleaseing to finaly start the cuboards.

[@GregVirgoe]

Yes most definitely, this is the fun bit, because it actually starts to look like a proper camper now. Wall cupboards are next :D

[@leestewart4064]

Excellent video again Greg. Very precise and informative. I would however of liked you’ve seen a bit more on the stud construction. Still the best van build video up there with ken tube and travel with jazz. If you have not seen them check out their sprinter builds

[@GregVirgoe]

Thank you Lee, the base plate was screwed to the uprights in exactly the same way all simple butt joints with single 2” recessed screw. I follow both those guys. Jazz build is excellent

[@AquaRover]

I searched "ken tube" and can't find anything. Can you clarify!

[@starman4500]

Nice T-Shirt

[@walcrow7319]

Great work, Greg...............You've found your new business.............VIRGOE VANS.......put me on the list !!

[@GregVirgoe]

I don't think I'd make much money doing it as I take far too long fussing over the smallest details lol

[@linamatthews512]

But your buyers will know it's built well! The only question is, do you want to give up early retirement?

[@johnvickers5750]

Quality work Greg, I particularly like you repeating the common processes on each vlog. No luck with that round of golf yet by the way👍

[@GregVirgoe]

Have you been up and seen the course yet? I haven't played for years, maybe when I retire lol

[@johnvickers5750]

Not yet but I've been in touch with my old contacts at Backhoe & Loadall Quality to get things moving😉

[@florian191]

Good Video well done :)

[@matsf8268]

Looks very Nice Greg, awesome skills, I wish I had a friend like you nearby 😂😁

[@GregVirgoe]

I take it you are also doing your own van build?

[@matsf8268]

Greg Virgoe No,my wife is not convinced I would finish it if I started, so probably buy one in a year or two 😄

[@karlbartelt3939]

Greg you're wearing an X-ray image of my Van! Nice one!

[@GregVirgoe]

Ah.. the VW camper T-shirt, one of my favourites. Although I need a Sprinter camper T-shirt now

[@karlbartelt3939]

I think you've made the T-shirt design already in Sketchup, you just need a picture of you holding a power tool :) You're going to struggle a bit being away from your tools when you travel, at least you have these videos to watch at nights when your wife is sleeping :) (What are you watching love? Nuffin dear, just some of me old drillin and screw'n videos.

[@GregVirgoe]

Probably the only screwing and banging that will going on in the van. LOL

[@malcolmhughes9094]

Incredibly useful videos and it has inspired me to get on with such a project. Just one observation with this one was the fact that the grain on the veneer runs horizontal on the section above the cab and vertical on the dividing wall driven by getting the most out of what is quite expensive boarding?

[@overlordone1246]

Brilliant build, do professional. Good work mate.

[@lorcro2000]

Very interesting video. Personally, I've given up the idea of using lumber to construct the skeleton, the t-slot extruded aluminium you can get and just cut to length and bolt together seems like a better call all round. Probably more expensive, though, but any idiot (like me) can bolt together a t-slot framework and get it 100% square, and very rigid. And mounting something like that nice covered 3mm ply you showed on it is a doddle, there are specific mounting hardware for that. One big benefit of it is also that you can just unbolt it, adjust things - and bolt it back down. With wood, you're drilling anew and screwing it together in a different hole.

[@GregVirgoe]

There are many ways to skin a cat, not that I advocate cruelty to cats of course. Make sure your chop saw is set up square, metal is less forgiving than wood. :D

[@marilynwisbey9446]

Thank you easier to understand .. will buy a Mobil one not fixed to roof. Thank you.

[@GregVirgoe]

At least then you can turn it to aim at the sun for maximum efficiency :D

[@jessestrum]

super greg surely theres a cabinet makers background there

[@john9291]

should be gluing and screwing, much much stronger. A flexible adhesive like Sika FC11. Will also stop creaking in the structure with van moving all the time

[@marilynwisbey9446]

No cant spot the joint! 😃👍👏

[@GregVirgoe]

It helps that it's stripes to start with ;D

[@davidharris3888]

Well done Greg i live in ireland and find it hard to get the lite ply board i have just started my van and have watched all you videos and have got some great idea from you keep up the good work

[@GregVirgoe]

Two other trade names are Vohringer and Superva Thank you for the support, much appreciated.