Mikes Guzzi Eldorado Motor Assembly

[@stevewalden3814]

Thank you for videoing this process.

[@MoeMooreCycleGarden]

You welcome!

[@erinstich9874]

Can’t wait to see her all finished! You guys are the best! ❤

[@MoeMooreCycleGarden]

Thank You!!

[@bob7230]

Love the more detailed repair videos!

[@Tony-il2ui]

awsome nice work good music crickets ha ha

[@shawnewaltonify]

Making you some chocolate for you as I watch this. Will send some to Mark too. Won't get to you until the New Year. Merry Christmas! Have a good Christmas you guys.

[@MoeMooreCycleGarden]

Thank you!!

[@shawnewaltonify]

You are welcome!

[@iTautra]

What paint do you use on the case/motor? I'm going to paint mine when the spring arrives. Great to see all the nice restorations and builds you have done. I believe the bigbore kit on my bike is from you. I bought the bike from the second owner after the engine rebuild(was done by an engine workshop in Norway).

[@jawoo0326]

You know, on top of everything else, that Steve is a nice guy too.

[@MoeMooreCycleGarden]

He Gets Cranky once in a While!!

[@jawoo0326]

​@@MoeMooreCycleGardenThat's fair!

[@wilharnecker2575]

Awesome. Thank you for sharing!

[@MoeMooreCycleGarden]

My pleasure!

[@loris199]

Sabbiato così è davvero inguardabile

[@scottp7587]

ma l'hai guardato 🤣🤣🤣🤣

[@MoeMooreCycleGarden]

Allora non dovresti guardarlo!!

[@loris199]

fin troppo bene, come tutti i loro lavori. il blocco motore ed il cambio sabbiati, con quell'effetto opaco, non si possono vedere. stessa cosa per i ceppi dei freni. @@scottp7587

[@loris199]

ahahaha ok, grazie per il consiglio, ne terrò conto :) @@MoeMooreCycleGarden

[@danieljohnstone6805]

Thanks For Posting Moe And Steve. From Central Minnesota

[@oluffriesthomsen7680]

Did you not forget to tell people the 2 bottom bolt in the rear bearing should be mounted with a little silicone, to make sure the oil does not run out, into the clutch housing.

[@hillbilly4christ638]

Having that cutting torch trimmed that close to the case makes me nervous. That aluminum will melt in a heartbeat. I know you know what you are doing. I like knipex tools too!

[@oluffriesthomsen7680]

When you were talking about the distributor being lubed, you forgot to put in the felt in the middle.

[@scottp7587]

do you pin your bonze bushings?

[@MoeMooreCycleGarden]

Yes! or they will spin!!

[@rotormotored]

That was an exciting video. I liked watching Steve o work by his experience and know how, Moe with the narration and Linsey Lou showing us her Butt in the air. .... And intermission by Snowball.

[@oluffriesthomsen7680]

Serious using a grinder with out covering the rest of the bike. Sparks flying all over. 😡

[@oluffriesthomsen7680]

Do you put a used oil pump in. 😡 I stopped watching here, because you do not Seem to know what you are doing.

[@hillbilly4christ638]

If you measure the components and they are within spec, there is no need to replace them. Without knowing anything at all about the bike, the components may not be showing appreciable wear. I have rebuilt numerous engines and I always refer to manufacturer specifications as well as being aware of the general condition of the individual components. These guys are very specialized and I am sure they forget more stuff about these engines than I know.