Exterior Detail 303 Graphene Spray Coating

📺Subscribe So You Don't Miss Stuff!
goo.gl/DzwJ9W
Exterior Paint Protection Detail Service #realdetailing
If you're interested in One-On-One training visit wwwTheDetailingWorkshop.com
Or if you are unable to travel to our Shop you can opt-in for Virtual Training...
Click the link below!
form.jotform.com/mirandadetai...
The Detailing Workshop Channel. • Welcome the The Detail...
Detail Wise PRO bit.ly/3gFNVip
Who Loves COFFEE? We do! Buy us a coffee www.buymeacoffee.com/Mirandad...
Become a member and join! It's not a big deal if you don't want to or don't like the idea of this, in fact, you're not missing anything important. It's like extras and behind-the-scenes stuff, you used to get when you bought a special edition DVD. Do people even still buy those? Well, join if you want extra stuff. If not...It doesn't really make a difference.
/ @mirandadetailing
0:00 Intro
2:01 Wash Process
6:37 Paint Inspection
10:38 Paint Prep & Protection
24:47 Wheels, Tires, Glass
27:22 Water Deposit Removal
28:26 Final Shots & Outro
🔗Check out the links below!
🧽🧪Tools and Chemicals
MJJC Foam Cannon. amzn.to/2Sr8Qwd
P&S Pearl Shampoo. bit.ly/3BdSDuU
P&S APC. bit.ly/3DeGEyW
IK Foamer Pro 2 bit.ly/2XRYI1A
303 Aerospace Protectant. bit.ly/3zpQY54
303 Graphene Spray Coating. bit.ly/3jn4gtv
The Last Coat ClearSR. bit.ly/32R0Xli
The Last Coat AMP. amzn.to/3yfyUZW
LED Light. bit.ly/3kqcDnq
Hybrid Solutions One and Done Compound.
Mini HVLP Gun. amzn.to/3yo02G9
AM Details Snow Foam. bit.ly/2MA3w6L
Meg's Hyper Dressing. bit.ly/2YT9gLp
Super Clean amzn.to/2zbIS1H
Wash Mitts. bit.ly/2YWO1Ik
Work Stuff Brushes. bit.ly/WorkStuffBrushes
Clay Towel. amzn.to/39pPk5C
Clay Bar bit.ly/2N5U1Mt
Stoners Trim Shine Protectant amzn.to/2hpDgfH
Myteelite II 8070 amzn.to/33SXMct
Vehicle Heated Dryer amzn.to/2JGFAsY
Ridgid Vacuum amzn.to/2i8Psyy
Casabella Brush amzn.to/2ErkKcK
Capri Air Blow Gun amzn.to/2i8pxqB
Detailer's Helper Belt detailershelper.com?aff=9
Detail Factory Ultra-Soft Brush amzn.to/2DahS7Q
Microfiber Towels amzn.to/2AESEK3
303 Aerospace Protectant amzn.to/2Ad8r2l
HDSpeed amzn.to/2xT3lGY
SPTA Polishers
Cordless 15mm DA Polisher. amzn.to/2SsMVkL or s.click.aliexpress.com/e/_98ZPRh
Extra SPTA Cordless 15mm Battery. amzn.to/35RzWzT
🐕Dog Hair Removal Tools
ANALAN Mini Pet Hair Remover. amzn.to/38x9Xjd
Lily Brush. amzn.to/2WaNJNz
Hoover Dog Hair Nozzle amzn.to/2BknvKO
Pet Hair Remover Stone amzn.to/2KYbNvu
Hoover Dust Brush amzn.to/2qMd3f9
🛒Huge Amazon Store with tools and products we use daily!
www.amazon.com/shop/mirandade...
Check out the link below and order some stuff!
carsupplieswarehouse.com?sca_ref=81745.BhlFvTbXDc
________________________________________________________
👕Visit our online store to purchase STUFF!
teespring.com/stores/miranda-...
⚫️Detailer's Cord Snaps!
bit.ly/3k0kk23
💻Visit our website for a HUGE list of tools and products we use! mirandadetailing.com/shop-2
💎Click here for our Detailing Services: www.mirandadetailing.com/deta...
Miranda Detailing
804-972-3051
www.mirandadetailing.com
___
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
🔦Lights
4 Pack LED Shop Lights 3600 Lumens 5000k amzn.to/2KiV9oT
5500K Photo Studio Light amzn.to/2DcQI0c
LED Light Bulb, 5000K Daylight, 1100LM amzn.to/2KdfVat
Astro 50SL Color Match Light amzn.to/2nqeyuN
Astro 50SLMAX 450 lm amzn.to/2Su3GuU
📷Recording Gear:
Canon M50 amzn.to/3CscE29
Sigma 16mm 1.4f Lens. amzn.to/3jyq8kt
Rode Wireless Go II. amzn.to/37tYmQk
Comica CVM-V30 PRO Camera Microphone
amzn.to/2Ss4Tmu
#DetailingRichmondVA #CeramicCoatingsRichmond #autodetailingtips #mobiledetailing #interiordetailing #exteriordetailing #realdetailing #truedetailing

[@ll1122]

As always superb results and amazing videos. Thank you Phil, regards to both from FL. 😎😉

[@josephmclean515]

I’ve used 303 for a couple years now about every six months usually before winter and before summer especially before winter in my area cause the weather is really harsh and extremely cold and after a couple years, my car still looks brand new like when I bought it

[@MirandaDetailing]

Awesome! Thanks for sharing!

[@thinkforyourself5672]

I just tried their new 303 Graphene Detailer and I was super impressed. It does spray on the panels with a gray tint to it. I used it on the entire car as a drying aid. It came off easily, didn't streak, flashed immediately and left a super super slick and glossy finish with fantastic water beading. Highly recommend it

[@verdantacres4460]

Great video. You really have mastered detailing and effectively explain how to use products and creative ways to use products outside the box.

[@MirandaDetailing]

Thanks! 😎👍🏼

[@ddautodetailing]

Haven't tried that yet, but I have heard others talk about the removal process being a little tough as well. Truck looks great!

[@KoolDadCC]

Kash definitely felt that same grab when I tested this 303 I tried it out in the sun and I thought that was why so tried in a control and the same grab but the results are amazing... Great video Kash definitely learned a new thing or two which is always greatly appreciated

[@404notfound.....]

I have to be honest, I tried to 303 graphene and wasn't that thrilled with it. For the same reasons you mentioned Phil. Great video sir.👍🇨🇦

[@Mdetailing]

Great video phil....we love green star in Europe. 8-9usd for 32oz retail we pay here. Our most beloved apc along with bilt hamber surfed hd

[@kuba7875]

After watching this video i really want to try this product, i already have TW flex graphene and adams ceramic graphene spray coating, i am addicted to buying car care products, this one is next on my list

[@MrRamperez01]

I actually like it. Used it on our SUV. Other reviewers kind of turned me off to it. But I like what you say about trying things for yourself. I tried it and it has worked out very nicely.

[@J1Z06]

I used 303 Graphene on My Mom's '20 Forester. It's a daily, but it's garaged. It's definitely more of a sheeter now... still holding up though. For an outdoor only vehicle? No garage time... ng! At least, that's My finding. Another fine video!! Enjoy the weekend.

[@jeffreyjuneau1959]

How was it to apply? Not to bad? Can it be applied outdoors under great weather conditions?

[@KoolDadCC]

Kash never tried it on the plastics so I will definitely try that

[@neilhibbert5201]

Hi phil I have used this product and was told to use a damp towel it made it a lot easier to remove.

[@MirandaDetailing]

Yes that’s an option also. Pretty much all of these hybrid ceramic or Graphene sealants play well with water. Thanks!

[@mhlittleton6493]

Turned out great as always, Phil! You and your wife prove that the products you choose to use really are secondary to your knowledge and skill as a detailer in using them. It doesn't matter what the two of you use, the results are always fantastic! Speaking of products, what is the typical longevity of Stoner's Trim Shine before it needs to be reapplied? Looking for something for my wife's RAV4 - it has a ton of plastic trim. Thanks!

[@MirandaDetailing]

Hi. Thanks! The trim shine lasts maybe a few weeks before it fades again. It’s just a temporary solution. But I love how easy it is to use.

[@danlegge2742]

Found 303 Graphene very easy to apply and remove, great gloss levels and water behaviour. I’ve heard some complaints about durability but when it’s this easy to use It takes no time to top up/add another coat.

[@stevepettner3693]

I have the 303 but afraid to use it. I don't want it to streak or look like high spots. I'll try it sometime.

[@completeturnarounddetailin3536]

i haven’t used the graphene but ive used the touchless sealant and its great! is that the standard way of applying is to let it haze? i wonder if that has to do with it grabbing? idunno came out awesome though.

[@Norwegianvideos]

Hi Phil! If you get the chance I can highly recommend Vorreininger B (Vbn) from Koch Chemie, I use it instead of Green Star on the exterior here in Norway. Vbn has a higher PH value which gives it more bang as a degreaser. I use Green Star in the engine bay (Ratio 1:5-1:10) and as an interior cleaner (Ratio 1:15-1:20). 🔥👍🏼

[@MirandaDetailing]

Cool! Thanks. Unfortunately I don’t think it’s here in the states yet. I’m sure it make its way over soon. 😎👍🏼

[@kevkav5680]

Hey Phil another good video, I have used 303 graphene on my white Audi, the product is ok , good durability but not the best shine , I’m not sure if I will stick with it , as I think it dulls white paint, I would be interested in your thoughts , thankyou

[@JulioRodriguez-oc5bb]

I like the quick run down in the intro of what's gonna go down🙌🏻

[@ParagonAutomotiveDetail916]

Graphene.. 🤔 Nowadays so many products leave your paint looking good. And I think what sets the best apart from the rest is ease of application. IMO that is imperative to be competitive in this market. That being said, I tried the 303 Graphene and found it about as much of a pain to apply than an entry level coating. If I’m going to go through the effort, I’m sticking to Bead Maker or even P&S Sole. Takes almost no time to apply, can up charge for Sole as a coating and fantastic results every time. Great video guys!

[@jeffreyjuneau1959]

Where can I purchase those products from?

[@MirandaDetailing]

Carsupplieswarehouse.com

[@kimnewling5728]

One thing I hate is grabby products. Just what I want to do when I'm tired. So much other cool stuff out there to use. Thanks for showing us the application of this. Hi wife.

[@kevincampbell8298]

I read the same about the graphene. In its pure form it’s clear. And one manufacture said they tint it dark/black because people think it’s black and not clear.. 🤷🏼‍♂️ I don’t get it. If it’s clear that’s probably better not staining stuff.

[@MirandaDetailing]

Yeah I know. 🤷🏻‍♂️

[@barrybij8079]

the vehicle looks awesome.. ive never tried the 303 but wow is that car glossy even without an enhancement... question, i noticed you used a spray gun to put on the tire dressing. it seemed to create lots of fumes... any concern breathing that in..? anyway great vid.

[@MirandaDetailing]

Hi. Thanks. Yeah the overspray can be annoying. Spraying outside is definitely recommended because the open air carries it away. I would not do this indoors.

[@stihlmanchainsaw8445]

Could you put another mist spray over top, or is that a non plus in this instance? (Sorry if it is a dumb question). Thanks for the great information!

[@MirandaDetailing]

Hi. You mean just another detailer or spray sealant over this? If so yeah thats fine.

[@colekramer4014]

Good morning Phil. Love that idea of using a spray gun for tire dressing was wondering where did you get that?

[@MirandaDetailing]

Hi. Thanks. Everything is linked in the description below the video. But I’ll post it here for you. Mini HVLP Gun. amzn.to/3yo02G9

[@colekramer4014]

@@MirandaDetailing cool thank you and all you have to do is put what your using in there and spray it? Because I use chemical guys vrp. Also could I put 303 in there and spray it on the trim?

[@MirandaDetailing]

You’re welcome. Yes. I use hyper dressing in that straight. But VRP may be a little to thick so you may cut it a little with water. Pretty much any dressing works.

[@adammathews9246]

Phil have you used the Exoforma graphene spray coating or quick detailer? I bought their kit and was wondering if you or anyone had any tips. Any advice is appreciated thanks.

[@MirandaDetailing]

Hi. no i haven't tried that yet.

[@richardseem7948]

Awesome video and tutorial/content good friend. I'm sure u reached out 2 the trolls 4 advice about that ipa ..

[@greymark420]

Wonder if the coating would be a good product to dress running boards on a vehicle, as its a bit grabby and not too slippery.

[@MirandaDetailing]

Oh possibly! Good idea

[@chavezcustomdetailing9540]

Hey Phil what was your solution mixture of Acetone and windex for the panel prep you were using?

[@MirandaDetailing]

It was the Yvan Lacroix mixture. 1/3 Acetone 2/3 Windex, the one with Ammonia. So basically 1:3

[@chavezcustomdetailing9540]

@@MirandaDetailing cool thanks Phil!

[@jjjjjjjjjjjhjjjjjhjj]

How can I clean the plastic front grill on a car with hundreds of the little spokes/slits The aerosol sprays are not working well I don’t have ventilation

[@MirandaDetailing]

Those just take time to clean with a towel individually. It’s a pain!

[@chadharrison1629]

I detailed my car last week for the first time & applied the turtle wax to the max wax & it was grabby too. Would this 303 be a good option for a topper to the turtle wax? Or stick to the flex wax?

[@MirandaDetailing]

Nice! I would stick with the Flex wax since they use the same formulas. 😎👍🏼

[@chadharrison1629]

Alright thanks for the info! I'll grab a bottle of the flex wax next week 👍🏻

[@stilleysmobiledetailing1696]

Phil, what lighting are you going with? Which lighting have you already installed Btw, big ty guys for yet another solid video

[@MirandaDetailing]

Hi. thanks! Which lights do you mean? The ones in the shop?

[@stilleysmobiledetailing1696]

@@MirandaDetailing yes the shop ones

[@Ecdetails]

Phil what’s your overall thoughts on green star

[@MirandaDetailing]

Hi. We love it. It’s a strong cleaner for both interior and exterior.

[@noodle3872]

@Miranda Detailing - which do you prefer and why; 303 Graphene or Ethos Resist Graphene?

[@MirandaDetailing]

Hi. I haven’t tried Resist yet, so not sure.

[@lazyjacket]

I like Resist better. Quicker to apply, and smoother feel to paint. And it smells alot better. But I do like that 303 haze over so you dont miss anything. The 303 needs a few layers inorder to perform long term.

[@chrissemsch8781]

Holy macaroni, am I the first to comment? I’ve got nothing to say yet because I haven’t seen the whole video. I’ve used the 303 Graphene numerous times and I like it.

[@eds1990sporty]

I have used a303 graphene I do not like it on dark colors cuz it does not seem to hold up. It has held up on light colors though

[@larryyoung3732]

Okay, my question is, would you cheaper price for the spray graphing Coat Or would you charge the same price as what you will charge for regular graphing Coat?

[@MirandaDetailing]

Hi. If I use a spray coating I always mention that it’s not a true coating, and the price is always less than a true ceramic coating service. I don’t really use graphene coatings or advertise that I do. I still use Gtechniq and gyeon ceramic coatings.

[@larryyoung3732]

Ok Thank you!

[@scottsaia5134]

What did you use for your IPA wipe before the 303?

[@MirandaDetailing]

We used this mixture kzbin.info/www/bejne/i3-bhZRmi81piZY

[@scottsaia5134]

Awesome. Thank you!

[@inface421]

Hello What is the best polishing machine for paint correction Flex xfe 7-15 150 or rupes mark 3 lhr15?

[@MirandaDetailing]

I personally would say between those two the Rupes.

[@inface421]

@@MirandaDetailing thanks for reply

[@mckenzie062006]

Hey Phil What is the difference between graphing coating and ceramic coating and which one last longer. Also what graphing coating is the easiest one to apply

[@MirandaDetailing]

Hi. So we don’t really use Graphene coatings. I don’t trust them just yet. Still have to wait and see on those. I have one that I will try but I still continue to use ceramics because they tested, tried and true.

[@Dee--Jay]

U right. Graphene is clear. I read that companies adding dye to formulas for marketing purposes

[@RobertSmith-di5ll]

Is using a power spray on the cowell a good idea?

[@MirandaDetailing]

Yup. The pressure is not very high. All water funnels into drainage in those areas anyway.

[@thinkforyourself5672]

Phil, I have some of that annoying shiny black trim on my Type R. Between the doors, around the back bumper and the grill. What should I use to protect that? I feel like those trim products won't soak in at all because it doesn't seem porous. Thanks

[@MirandaDetailing]

Hi. Are they shiny like the paint, or is it bare plastic?

[@thinkforyourself5672]

@@MirandaDetailing, Shiny like the paint. Definitely some kind of coating on them. It's those door sills that everyone covers in fingerprints when they're closing their doors lol. Those wild fingerprint magnets

[@Mdetailing]

The reduced graphene oxide that they use on the formulations of those products is on a powder dark color form, unfortunately is not completely saluable on the solvent chemical carriers both spray coatings but also ceramic graphene coatings are using, that is why they leave so much residue behind from the powder.

[@Mdetailing]

I have video research for this....but...you have to learn Greek first...hahaha....love you Phil keep up your great work,i admire your job

[@MirandaDetailing]

Cool! Thanks man

[@harrynazarian3184]

HAHA!! That rant at 23:20! Amen brother, amen. I crack up when I hear the kids say the same shit, and I just roll my eyes. I am a huge fan of 303, well before they became ultra famous, out of the blue. I'd been using their spray wax as a drying aid for a while, same with the interior protectant and cleaners. Haven't used the carpet protectant yet. But I've been very happy with their products for a long while. I haven't used that graphene spray yet, namely because of the cost and I already have a ton of Turtle Wax Hybrid Solutions and Pro products that are working amazingly well. However, after seeing how the 303 Graphene spray coated the plastic like that, I may go get it and dress up the plastic and rubber on my cars at home. By the way, and don't shoot me, yet, but I have been keeping an eye on ArmorAll's recent products, and, wow... I think they're getting ready for a huge come back. I tried out the wheel cleaner foam spray they have, that sprays on BLUE, turns white as it cleans, and literally, wash it off with little to no agitation depending on how much grime you have. I tried it out on my cousin's GL350 with caked on brake dust on her wheels, and to my shocking surprise... removed a good amount of caked on grime and brake dust! Keep an eye on ArmorAll, they're coming around really nicely. They just released a ton of new products that are SiO2 and Graphene recently. The prices are amazingly cheap. Figured I let you know. Keep an eye on them.

[@MirandaDetailing]

🤣. Yeah I have seen ArmorAll making some comeback products. May have to try them out!

[@harrynazarian3184]

@@MirandaDetailing I honestly think you should. It would be nice to see a progression video series for ArmorAll as well, because if their wheel cleaner did this well (even out cleaned my Chemical Guys Diablo wheel cleaner) on caked on grime and brake dust on my cousin's wheels, ArmorAll may be a household car guy's brand again. Like Turtle Wax. If ArmorAll keeps their prices this low for a while longer as they make a comeback, I think they may be a force to be reckoned with... again. :D I'm gonna go buy their carwash, leather cleaner and conditioner, and glass cleaner next. Again, they're available at Walmart, Autozone, Advanced Auto, and Pep Girls, and the prices are pretty awesome. Can't hurt!

[@AntLive29]

I’m not a fan of the wheels either. Distracts from an otherwise beautiful truck

[@davidboyce6427]

Phil I know Jessica puts q spell on your speaking because you tease😀 her about her arms

[@davidboyce6427]

I’ve learned so much because of you both. I truly appreciate you both and the wealth of info you bestow on your viewers 🙏

[@Knards]

I have found the 303 doesnt last very long. I use it on my neighbor lady's car, and within 4-6 months its gone

[@MirandaDetailing]

Yeah that typical for most spray sealants. But again many variables come into play.

[@Knards]

@@MirandaDetailing True, preparation is key to that as well

[@1stfrompuertorico568]

1st

[@richardseem7948]

How did u like using spray gun 4 tire dressing?imo wasn't impressed but that's my take and I'm sure the trolls are going 2 blow me up on this comment. ☝☝