Moen High Arc Kitchen Faucet - Repair (Leaking - Bad O-Ring)

[@chuckkise1534]

This video was spot on. Others did not explain the nut that must be removed before pulling the spout out.

[@krazetv]

thanks a lot

[@donaldlenardson6291]

I don't know if you noticed this , but I could not see much of anything you were doing because all I could see ( for the most part ) was the back of your head , hands & arms .

[@krazetv]

Here's an updated video: kzbin.info/www/bejne/gnKuYa1nf9BmmZIsi=E4YQIRkMeMaj3Vk9

[@KivAknee]

I have this faucet and I have been looking for help on how to fix this exact issue so Thank you!

[@swissarmywife2039]

Thanks for the help. Got it fixed. 🙂 your video was really helpful.

[@krazetv]

Thanks for the kind words. I know it's an old outdated video- but the good news is I haven't had to change it again yet. When I do I'll make a better video- LoL! thanks for watching! :)

[@davidmclaughlin5707]

Thanks. A close up of the O ring locations before you swapped them out would have helped even more. I only see one on my faucet.

[@krazetv]

thanks for the tip David!

[@lynngiroir7284]

Thank you ...very good video!!! Just the one I needed!!!

[@darylwood494]

How do u get to video #2?

[@bobbyduch8299]

hahahaha ........ u DIDN'T turn the water on , at the end ,,,i wanted to see the fountain of youth explode ,,,hahahahahahahaahahahaha

[@krazetv]

Yea it's an old video- haven't had to replace it since though. Sorry - this was my first attempt at fixing this and just thought I would film it. Thanks for watching :)

[@MsSevans2]

Does anyone know what that red and black tool is called

[@krazetv]

Thanks for the question- it's called a strap wrench- you can find them here: amzn.to/3cyIUTY Hope that helps- thanks for watching.

[@zimitas23]

What part number for o rings?

[@krazetv]

I'm not sure- since this was years ago- however find out what model you have and go over to the Moen store on Amazon to find your O-ring here: amzn.to/3SLmHXP I hope this helps. :)

[@Fearless_DoGooder]

What is the name of that special wrench that you used?

[@krazetv]

Matt Read thanks 4 watching Matt- it's called a strap wrench or mini strap wrench

[@toddpersutte1975]

Fearless_DoGooder grvfcvccyjugigtrddyuggffuurer eoghh

[@zero0karaoke]

The connector got stuck inside the cap for me. I can't seem to get it out. Not sure what to do other than order $87 replacement of the whole thing

[@zero0karaoke]

I got it loose! I screwed it back on and then used the rubber wrench to get the cap off, and off it came. For the first time since buying the place the kitchen sink doesn't gush from the base! Thanks for the video.

[@johnvititoe6051]

Did it leak any AFTER you replaced the o-rings?

[@krazetv]

No John - it hasn't leaked since I replaced it and this video was made over 4 years ago. Thanks for the question and thanks 4 watching!

[@egarnica9759]

Ye dude, couldn't see if you changed white ring also.

[@k.g.442]

Ya made sure your chrome was shiny clean, but you didnt show the o rings.. Useless.

[@bobbyduch8299]

he did show ,,,HOW TO GREASE everything tho ,,,,,hahahahahahaa

[@davidb.8948]

The white Teflon ring is separated as if it either broke vertically, or its supposed to be like that. Any idea?

[@k.g.442]

You can use a pickle jar rubber lid remover instead of the rubber strap wrench. I have done this job several times myself, but I wanted to show a friend how it is done. This video is poorly shot and poorly thought out. People should keep searching for a better made film.

[@ronaldsinger9445]

Next time show us what you’re doing, at least before you reset the faucet.

[@krazetv]

Hey Robert- I did make a new one changing the cartridges if you want to check that one out here: kzbin.info/www/bejne/gnKuYa1nf9BmmZI

[@henryvaldillez6785]

thanks for showing us how through your transparent hands wow 😟

[@krazetv]

Anytime! thanks

[@superserial1]

Holy fawk dood I was wanting to suck start my glock about 2/3 thorough the vid. But you finally got ‘ER dun’.

[@bobbyduch8299]

not really ,, he DIDN'T turn on the water at the end !!!! hahahahahahahaahahahhahaha

[@coachjm310]

isnt the rule that if your going to do a "how to" video that you know what your doing ???

[@krazetv]

Never miss an opportunity to make a video. Fun things happen when you're inexperienced. Thanks 4 Watching! BTW- I don't follow Rules

[@bobbyduch8299]

hahahahaha ,,,i would hope so ,,,i guess this guy DON'T think so ,,with ur head & hands in the way most of vid ,,,,hahahahahaah

[@tomsiracusa9609]

this guy for real ? talking to himself ,no view of what hes doing and rubber gloves . hate to see how long it takes for him to change a light bulb ! just sayin

[@coachjm310]

hes a putz

[@richardadlam145]

The important parts were hidden by his hands, back of head, never showed the end where the o-ring and white snap ring went, didn't show the new part kit. What was the point of the video? Only truly useful part was the nut that needed undoing under the spout stem Otherwise, nothing to see here!

[@donnieterrell6185]

The second video shows a different style faucet but this first one outlines the work on a dual lever and boast about free moen parts yeah right not for me I am sure. USELESS

[@krazetv]

thanks 4 watching- but this was my first time. I don't know crap about plumbing. I also made this video- so I can go back and remember what I did in case I have to replace it again.

[@bobbyduch8299]

POOR vid ,,ur hands or head was in the way most of it ,,,,,best part was the lil strap tool u used !!!

[@claudeperron8197]

Worst video yet ! congrats !

[@krazetv]

Hey Thanks man for the kind words- that's exactly what I was going for- worst video ever!!