Delboy's Garage, Fighter Build #93, Strip Wheels for paint..!

Time to do the cycle parts, first, get the old paint off the rims.
Patron Support:- / delboysgarage
Here at DBG we support and fund what we do courtesy of kind and loyal Patrons who help us with the bills and costs of running a progressive channel to help our fellow riders around the world, we put over 60 hours a week into this, much of it behind the scenes, and if you've saved money, been helped, or just entertained then you can lend a hand in the running of things too if you feel so inclined. From just $1 a month, you can become a Patron and help us make a difference. click the link above.
Or If you just want to say thanks for this video alone, you can drop a dollar in our "Tip Cup' by using Paypal to [e-mail] The money will go to make more videos and keep this channel in your hands and not the advertisers.
Wiha Tools available from RECON Electrical :-
www.reconelectrical.co.uk/
Follow us on Facebook :-
/ delboysgarage
Check us out on Twitter :-
/ delboysgarage
..and if you haven't already, then please subscribe :-
/ moonfleet41
Become a Patron and join the team :-
www.patreon.com/user?u=2841534

[@kennethmccurdie5833]

When it comes to undoing, in your case axle nuts, it’s gratifying to see someone using the correct tool for loosening tight nuts or bolts. Of course I mean the tommy bar instead of the ubiquitous ratchet. Too many times I’ve seen a poor old ratchet being stood upon or hit with a hammer to dislodge a tight one with the inherent risk of damaging the inner workings of the ratchet mechanism. When it’s tight get yer tommy out!

[@Moonfleet41]

Now that's a phrase I won't forget lol ! But you're absolutely right, I learned tricks like that as a religion, because I was trained as a diesel fitter back in the 80's, and you never use a ratchet for anything, most of the time you'd use a swan neck, specially for wheels, which is a big socket welded to a 1.5" thick length of bar, and then the bar bent 90degrees, the forging process gives a flexibility and they're totally indestructible !

[@reimop9595]

Looking forward :) Same job that I want to do before spring. Cheers,

[@hdrk59]

Good video just the right length ...heading out to work now. Thanks for sharing

[@tonywhitehead3327]

Great vid and good points for me as I need to strip down my wheels for blast and paint. Thanks

[@danparsonage3884]

In mint condition after the blasting, amazing result 👌🏼

[@Moonfleet41]

Thanks 👍

[@skyvietnam9161]

They cleaned up nicely!

[@motoedd2437]

Worked out well.. spotless base for finish on wheels..gonna look good.. ride perfection with new sprockets ,chain,bearings..max. efficiency brought back to wheels..

[@Moonfleet41]

Exactly that my friend, a great chance to remove the whole lot and start from scratch with bare castings !

[@mayorfl]

I remember you said that about putting everything in order like 3 or 4 years ago on a sportster video good advice stays consistent I honestly got that from that video and even took pictures the first time doing it

[@michaelray9727]

Great stuff del!!

[@ollieb9875]

Whu... It's so eaaaarly! 😁 Oh it's Wednesday! Nice, nice. Wheels look great 🙂 happy days!

[@sumatrajohnny]

Watcha Dell and Penny P! Great to get back to some basic bike anatomy. I bet there's many, like me have never seen wheels come off, and watching it done demystifies it so when the need arises we can get on and do it! Its certainly on my to do list now. See ya soon.

[@Moonfleet41]

Thanks John, simple stuff aye, but like always, the fear of the unknown, makes us think twice... glad it can inspire you, and yep, see you in a few weeks! D&Px

[@geoffozevans4500]

Thanks both 🏥🏥🏨

[@simonwernerisaksen]

The tank look much better now!

[@bloodyhell451]

It reminds me of when I aquired some Aprillia SR five spoke wheels for my scooter back in the day. Took me 2 weeks to sand them with every grade of paper from 120 to 2000 and then finished them with Belgom. Looked great ! If you want to test your character, polishing wheels is a pretty good measure ;-)

[@Moonfleet41]

haha I bet you'll never do that again! Good on ya for sticking at it... I bet your fingers haven't grown back to full length yet!

[@raytokens2291]

Nice one bruvva. Those wheels look mint. Considering it's an old bike they ain't half tidy. I need to get mine done soon this weather has killed them. Look forward to seeing them done and fitted

[@longjammeriii3323]

Hi Del. choices!! choices!! choices!!! I remember that my old man way back in the 50s when we were on a journey anywhere. He would say The Way To Go is The Way You Know. and it's stood me in good stead all my life# choose what you want because it's you it's meant to please! Lots of Love to you two. Rsmf Alan.

[@Moonfleet41]

Hi Alan, wise words well said, don't you...! You'll never please everyone, so why not just please yourself, you're right... I guess it's me who's got to ride it up the road aye?! Good to hear from you, and thank you for your very kind words, it's much appreciated, take care, god bless, stay in touch, all the very best, D&Px

[@Ratqueenbikes]

Great progress Rat Cuz. Enjoyed watching as always :) x

[@Moonfleet41]

Hey you, great to hear from ya, hope it's not too cold up there in the frozen north, just dreary and damp down here in the softy south...! Thanks for being there, take care, keep in touch, lots of love, D&Px

[@geoffozevans4500]

Great vlog, stuff I really like (pulling things apart etc)you did a good job there buddy. Just got back from Swansea after my pre op assessment on, pretty run of the mill ECG, bloods etc & the surgeon explained in great detail what could go wrong (much to the missus' horror) I've hot no worries on my part, glass is half full as they say. Absolutely stinking weather down here, can't wait for sunny days & bonding with Frederick Fatboy 🖒😎

[@Moonfleet41]

Glad it went well for you today Geoff, wishing you good luck on the big day - keep in touch and hope goes well for ya buddy, let us know when you are feeling better! D&Px

[@suzuki750stu]

Glad the wheels are ok for you underneath that nasty paint, look forward to seeing you get some paint back on them, regards Stu

[@Moonfleet41]

Sure thing Stu, black is the new black lol !

[@rsbharley4766]

Hi Del, the wheels have come up nice. I can see you having some restless nights with that tail unit and tank lol, but that is how it goes when something just does not look right. At the end of the day you're the one that has to be happy, no one else and I think Penny has a little job lined up for you and that chain lol. Keep up the great work mate, Cheers

[@Moonfleet41]

You could be right on the chain brother, I've got a few ideas of my own, so will see what the battle of wills produces lol ! Gt the wheels painted today, doing the editing, so will be online on Saturday... hope you enjoy... thanks for your support !

[@paulm1162]

Looking good Del. You're so right about being unable to please everyone, just please yourself as it is you that rides it :)

[@Moonfleet41]

Thanks Paul, apprecaite your support my friend...

[@brianking7838]

Hi Del , my experience spraying wheels is to fix the wheel vertical on an axle and spin it towards you,in a position that you can reach both sides, doing it this way you don't have to move the spray can about too much , the spinning wheel makes for a nice even coat of paint! l know you have painted wheels before Del sorry if I am stating the obvious!!!

[@Moonfleet41]

No not at all mate, it isn't obvious to the novice, but yep, that's exactly the way I do them... it's great to spin the rim and get a perfect seamless lay up of paint around the outside of the rim that will be be most visible - thanks for the input my friend, painting tomorrow for Saturday's video!

[@ThePonkster]

Never seen rear disk bolts come out so easy - jammy git :-)

[@matthewS993]

Great work again, I believe the original wheel colours for that year ZX7R was black. Ironically I have white wheels on my 7R, which go well with the scheme but dirt really shows. One thing that may be of use while its apart, its common for the pushrod seals to work loose on these bikes, bit of a design flaw. Often the seal is fine its just they "pop" out of place. Some use a new spacer to restrict it working loose while others a bit of RTV sealant around it, theres lots of online threads regarding the issue, mine failed when riding and coated the rear tyre in oil, luckily I spotted the leak. I have a set of purple wheels off my previous 7R which have just been lying in a shed, paints flaked off but seeing this is tempting to give it a go.

[@Moonfleet41]

Hi Matthew, good to hear from you ! do you mean the clutch pushrod seal?? Thanks for the heads up, I'll give it a look - really appreciate you watching , it's always great to have the feedback - cheers!

[@matthewS993]

That's the one, seems to be a common problem on the 7R and certain Kawasaki's. Mine failed a few months back without much warning. Great project and its going to be awesome to see it finished

[@timmason7430]

Have a good long look at the Bike before you decide to change the tail, I personally think it(the tail) looks better now that the focus has moved away from the tank. If you change the tail(make it smaller) you 'might' have to alter the bellypan, then maybe the nose next. As I said, Take a good long look at the Bike Before you decide to change the tail, Sort the console out first.

[@Moonfleet41]

Hi Tim, bang on, right on the money, you are absolutely right my friend.. am really hestitant to attack the tail, as unlike the tank, it's not wrong, it's just, maybe, a little big... and you're right, it will possibly throw out other proportions if I try changing it, so gonna do just as you suggest, get stuck in to the cycle parts and re-furbishment stuff, which won't take too long, and once that's all done, I'll only have the bodywork left to finish... and I think that console needs to be the thing that ties the front to the back, and I've a few ideas for something cool... thanks for your support my friend, much appreciated!

[@Cueballproductions1149]

They wheels come up nice I've just had my bearings done on the bandit all time and money ay

[@Moonfleet41]

Had them done?? ... you didn't do 'em yourself mate??

[@tntcyclespdx640]

I dont know if you guys play "dibbs" as kids on your side of the pond, but we do here in America. If Im not mistaken Penny Pitstop got dibbs on that chain. Rules are rules after all..........

[@Moonfleet41]

Oh yeah, we do indeed play dibbs, but when she claims dibbs, it means I get to make what she wants, rather than what I want lol ! You don't think she gets the welder out do ya lol ?!

[@softailfun]

Hey mate...... Now we're cookin'! Those internal threads on the wheel ....... Don't know how you're thinking of blanking those off when you paint the wheel to save paint getting inside. I've always used wooden dowels! Cheap, they pick up the thread, can be shaved to size, come out easy and saves messing about with tape. Just thought I'd throw it in there brother. See you soon!

[@Moonfleet41]

Ayup Stan, wise words well said brother, I've seen the dowels used before, I'll probably just stick the old bolts back int he holes cos I'm replacing them anyway, also gonna protect the faces the discs touch again as even a layer of paint can through them out of true.... see you at Haynes buddy! Take care both, D&Px

[@Satyr910]

Like with every design concept, they go through several iterations before they're finally "Complete". It's your bike so it's completely up to you how you want it to look. I myself thought the tank looked odd and now so does the tail but i wouldn't say they were bad. Just different phases of the design.

[@Moonfleet41]

Thanks Sean, you're dead right !

[@TomClark1995]

The tail looks fantastic, just needs to be 50% the size

[@brettwheaton6631]

they would look nice polished

[@Moonfleet41]

Are you offering to polish them then?....coz ive had mirror polished rims, and ill be buggered if im ever going back there again..lol Its more hard work than keeping chimpanzees..

[@boredofitall]

Holy %(%(&^%* Del! I go away for a few years and I come back to your channel with 16 million views and a fighter project that is pure mint! You have outdone yourself this time. Much love to you and Penny x

[@Moonfleet41]

Blimey, nice to see you back mate, where you been for a few years?!! Thanks for your kind support buddy, much appreciated ...

[@boredofitall]

Not biking much, busy with life! Still have the Russian 2T but it needs some serious attention. You're welcome, the channel looks great and the video style has improved. Onwards and upwards.

[@twistyturd]

I think it's a lovely bike! And I enjoy your channel. And I like the way you use your disk cutter. Sorry I kept asking you to wear shorts I was just pulling your leg 😀

[@Moonfleet41]

You don't wanna see me in shorts mate, that would be a perfect case of be careful what you wish for lol ... chicken would be more handsome ha ha.... all taken as it was intended buddy...

[@raytokens2291]

Leave the tail bruv. It is a piece of art it don't look to fat it still follows the tank lines nicely. Perhaps make changes to the light cowling to follow the tank it would look better matchin the tank making the tank a centrepiece. Just a thought bruv. Ride safe peeps

[@Moonfleet41]

Gonna do that Ray, will make a decision which way it goes once the cycle parts are all done, which I've started on already... thanks mate...

[@FS-eu5ix]

I’m currently working on my Suzuki rf900 and was thinking about adjusting the swing arm links so as to lift the back end. Have you thought or done that on your bike?

[@Moonfleet41]

Hi Fraser, I don't think they're adjustable mate, if your bike has regular dog bones, which I would imagine it does, then you just change them for some jack up ones... check out Wemoto, am sure they will have some for yours, already ordered mine, as will be jacking the back of the fighter up about 1.5" !

[@andrewdevereux5513]

Should have acid dipped only. blasting alloy wheels gives them a texture of a golf ball. you will need tons of primer to cover this texture. and to much primer can crack down the line. best thing to do. is take them to a powder coaters and as them to powder primer them. then grey scotch this and paint

[@Moonfleet41]

Certainly not eh texture of a golf ball mate, more like about 400 grit paper to the touch and a perfect keyed finish for the thick tough black paint I'm planning to use, stick with it mate, it'll look great !

[@ignacioborrajo1]

As you talked a bit about the tail unit at the beginning of the video, I would like to say that I love the concept but if I were you (or if it was my bike), I would like to "thinner" the tail maybe cutting the side pannels and creating a concave shape like the tank, but it's just my opinion. As far as it goes I like very much the whole bike and for sure it's the first street fighter style that I like (not a fan of street fighters). As always, great video and very inspiring. (sorry for my English)

[@Moonfleet41]

Hi Igancio, that's a distinct possibility... it's a common custom feature to reverse the side curves of a tank, or something similar for sue!

[@andydawson2070]

Looking forward to seeing how you paint them and what colour and paint type you use.

[@Moonfleet41]

Video up Saturday Andy, working on the wheels tomorrow, so will be all ready to go online Sat! Cheers

[@tinks43]

(P) Great service & fantastic result! 😀

[@Moonfleet41]

Sure was Cotti, and now painted, ploughing through the editing , be online on Saturday !

[@bobgwinn5091]

cool you have excess to a shop.... way cool

[@beozzie690]

Wondering why you are choosing paint instead of powder coating?

[@melashkov]

this is was my only question as-well, I guess it is just cheaper, but it is cost 30 quid to do one wheel, so not sure

[@Moonfleet41]

To all those that ask this question, powder coat is expensive, compared to paint, £30 per wheel vs. £6 for a rattle can, but more importantly than a few quid difference, is the durability... I've always powder coat to be too brittle and too hard, if you ever scuff it, or chip it, it can't really be repaired, the whole wheel has to be stripped back to the bare casting, shot blasted again and re-powder coated, and it only takes a careless tyre fitter and you're screwed! ..but this tough paint I'm using is the stuff for crash bars and bumpers, it sets semi-hard, rather than solid, it's durable and tough, almost more like the old stove enameling... I used it on my rat bikes in the past, and it's almost impossible to damage it... it's nothing like regular paint, but don't ask me what's in it ! I just know it works really well for what I need....!

[@beozzie690]

Moonfleet41 thanks for stating why you’re painting.

[@stevegrayshon2219]

Put the old chain in a vinegar bath to get ready for the future project then show us the results.

[@Moonfleet41]

Good idea Steve, may just do that !

[@fader2701]

thank you very much for doing this process. locally I get a lot of pushback from tireshops who dont want to put tires on "painted" wheels vs a powdercoated wheel. Why paint vs powder coat? wouldnt the powder coat be even more durable? just curious. thanks for the video.

[@Moonfleet41]

Hi Richard, spoke at length with my tyre fit guy about this, and his opinion is that he prefers paint on wheels cos it's more flexible... don't confuse hard with durable, cos that's what powder coat is, it's originally an industrial coating for machines and it's easy to chip cos it's very hard, whereas paint is not so hard so not so liable to chip and if you do damage it, it's easy to sand it back and spray it over to make an almost invisible repair .. stick with it, am painting them tomorrow !

[@DJJammyD]

Good result. If you dont mind me asking del, how much did that cost you? Looking at getting my 990 rims stripped and powder coated orange :) cheers mate

[@Moonfleet41]

Hi DJ, the local guy did it as a tea money job at £40, but as that was strip only, he quoted me another £60 to powder coat them, and I'm gonna use the satin black tough paint, which has worked for me many times, is really durable and will cost me about £8 worth of paint to do the pair! Of course if you want a lary colour, powder coat is one of the best ways to do that , so I imagine you might pay about a ton for the pair, done and dusted, but don't forget to factor in 5 wheels bearing as well as any cost of taking off, and re-fitting the tyres... it all adds up aye mate?!

[@DJJammyD]

Moonfleet41 i thought about a tonne tbh mate cheers for the tip on the paint tho. I want mine ktm orange 😂 try 6 wheel bearings on the ktm 🙈

[@PJF62]

(p) I've really enjoyed the fabrication but the spanners and hammers make a refreshing change. Even though I, like others, pointed out the tail being too big, cameras are notorious for distorting the scale and maybe in real life it doesn't look so out of scale. Anyways, good video as always.

[@Moonfleet41]

Hi PJF, you're dead right my friend, certain camera angles, especially on semi wide screen makes the tail look 4x it's size... the back of the tail unit is smaller than the tank in every direction, it's as much as 3" narrower, so perhaps it's just the curves that give that impression, but haven't finished with the bodywork yet, just fancied a change to gett he spanners out again!

[@TheMetalmechanic]

like the tail,, hope u leave it , youve done somethigs with this bike no one has before

[@kevwye6922]

How about a koso dB-02r dash then mound round to replicate the hump on the rear

[@jonboy-kb1jj]

Glad those rims are good mate. One question, won’t you mark your new paint when putting the bearings in? In the past when I’ve had wheels blasted, I put the bearings in, then just masked them up before painting.

[@Moonfleet41]

No shouldn't do mate, remember most for he time you fit bearings to wheels that are already painted, I've never chipped paint yet, but am planning to replace these bearings gently, am gonna use a bridge puller to remove them, and a bearing driver to put the new ones in, and I mean the threaded bar kind, rather than hammer them in, it'll be a test of the tough paint, it's never let me down yet, I just didn't wanna risk even one grain of metal grit getting in the new bearings, you know how easy that can be !

[@jonboy-kb1jj]

Defo mate, I was just a bit concerned that with fresh paint it’s a bit soft for quite a while and easily marked, but if you’ve got the pullers & installers then happy days, look forward to seeing them all done, will look nice in satin black.

[@stephenmitchell8324]

Hi Del good vid. I've come across a paint called Line-x Protective Coatings is supposed to be bomb proof

[@Moonfleet41]

Thanks buddy, have heard of it too, looks pretty industrial aye??!

[@ZingTowPootWerkins]

Also, I know your DIYing this bike on a realistic budget, but have a scout around, you can get some pretty, er, pretty Y spoke modern wheels for not stupid prices, without too much chain offset and disk wangling, which would look luvly jubbly... :)

[@Moonfleet41]

Hi TH, I did think for a while about spoke rims for this bike, but then checked out a few German streetfighters with them already, and they do look a bit odd... also that's a 6" wide rear rim, so that would have to be custom made only, as far as I know, there aren't any 6x17 rims out there in the second hand world... and I've already had a pair of custom built alloy spoke rims with Tallon hubs for Penny's Scrambler, and they were not cheap by any means lol - couldn't afford a set for this bike, even if I wanted too ha ha

[@lesliestockton1794]

Hey Del, have you thought about water transfer printing.Dont know costs but lots of choice of colours or patterns.

[@Moonfleet41]

Hey Leslie, not a great fan on hyrdo dipping, I know it's very effective but not something I fancy for my wheels, just gonna roll with satin black for simplicity and keep it nice and subtle ! Thanks for your input, always good to hear from ya!

[@chazphot]

4:05 how long have you been waiting to break out that 3/4" socket set? It's one of those things I want but I know realistically there's nothing I can't do with a 1/2" breaker bar.....for now.

[@Moonfleet41]

Its the sizes of sockets you dont get in regular sets that become an issue,, 38mm and over are usually single purchase only.. so i just got a set after years of struggling and doing without.. you're right, you dont use them as often as the smaller sizes, but when you need a 40mm socket its nice to have it handy..!

[@shanejohnston8985]

Hi del . How much roughly does it cost to get a pair of rims blasted . Mine are in desperate need of attention . Cheers love the videos

[@Moonfleet41]

Hi Shane, I pid £20 a rim to have them done, so for £40 all in, the guy did them and the sprocket carrier too... just give your local powder coaters a ring and see what they quote you, as it's a labour only process, with no parts or products, involved, most of them are more than happy for cash... see how you get on, good luck with it , Del

[@MrG00ny65]

Looks like I`m not the only one who was wondering why you are painting and not powder coating the wheels. Surely powder coat gives a nicer , tougher finish?

[@andrewdevereux5513]

paint wins for looks over powdercoat anyday. powdercoat is an industrial coating and never has the same shine as paint

[@MrG00ny65]

I stand corrected. Always thought it was the other way around. Thanks.

[@Moonfleet41]

Goonster - hi mate, what Andrew says is right, powder coating is really best for frames and other industrial equipment, the reason it's often done on wheels at the factory is cost, as the process of powder coating is simple and not expensive, compared to running a full paint shop and of course the cost of materials is remarkably different, but small individual powder coating jobs have just become habit for most people with wheels and small parts, sometimes because they can't paint to any standard, and others cos they just can't be bothered, it's so easy to hand it over to a guy and have it all done a day later, but in real terms, paint is always best on wheels, it's more durable and flexible, it doesn't chip so easily and if in the even you do chop the paint on a wheel, you an just sand it back and spray it over in a localised repair, which you can't do with powder coat.. stay tuned, you'll see, am painting them tomorrow for Saturday's video !

[@TheEnergyball]

Looking good Del. I haven't been following for a while so it's good to see how lovely the bike has been coming along. Good show! Glad for you it worked out that the wheels were in such desirable shape under the layers of paint. As I prepare mentally to make some cosmetic modifications to my bike this year I can understand why people cut corners- whether it's that they never learned the process, want to go cheap, or don't have the patience to make a proper project of it and feel constrained by time to get it done. That said, there's nothing quite like doing it the right way full-on and the result speaks in your pride and connection with the job well done. It's something you've practiced so what takes you an hour may take some of us 5 or 7 hours as we grope in fear not knowing if we are getting in too deep. It's helpful to know that everyone, even you -had to learn at some point. Thank you for sharing the project and the tips to understanding some of the wisdom in the process. Wishing you and Penny a blessed new year with good health and success in your endeavors.

[@Moonfleet41]

Hi Ali, how nice to hear from you and what a wonderful message - thank you! I'm still learning every day, from other creators on YT, from friends and, of course, my own mistakes of which there are often many - you know how it is, nothing ventured, nothing gained, and if you don't try it out for yourself, you'll never know if you can do it or not...! Am glad the videos we make can inspire you, thank you again for your wonderful feedback, keep safe and stay in touch brother, all the very best for 2018, D&Px

[@limpbird6843]

Nice, I know motorcycles is your thing but can you consider doing a project on scooters too, in the how to department since they have some parts totally different to a motorcycle as the clutch for example thx.

[@Moonfleet41]

You are correct, they're not really my thing, but it's a big market for sure !

[@teddystephens5587]

paint the spokes polish the out side rim'

[@Moonfleet41]

Polished rims are more grief than owning an otter....lol

[@CajunGreenMan]

You just did a video on using vinegar to take off rust. What would soaking a bike chain in vinegar do?

[@Moonfleet41]

Hi Jeff.. i would initially think not to do that, because im not sure how it would effect the rubber 'O' rings, also it would dissolve ALL the lubricant right inside the rollers... it may not do any harm, but its not a thing ive ever done.... i have a chain that wont ever be going back on a bike, ill be using it for some sculpture projects... so ill be putting it in some vinegar this weekend to test this out...! only time will tell ,and ill show the results in two weeks time..!

[@CajunGreenMan]

Here is what prompted me to think about the impact of vinegar on 'O' rings: kzbin.info/www/bejne/fKvcnGekppionZI.

[@garya3056]

Hi Del- wouldn’t it be great to have a tire mounting machine like that in the garage?

[@Moonfleet41]

Oh yeah... you know it ... and a hyrdaulic press, a parts washer, and a full height drill press, and a folding brake, and lots more... but there's only so much room in this little garage, we're super excited to be taking delivrey of a band saw next week, and even more excited, next month we hope to get a small lathe so I can turn up some funy parts ! One step at a time aye lol !

[@garya3056]

Moonfleet41 Sweet-!!!

[@pauldowding8185]

Does is tank make my bum look big?

[@pkpropertysolutionsltd701]

My bro makes some cool steampunk clocks and art pieces using chains, sprockets, bearings and other scrap. Get creative! You sure got the abilities

[@Moonfleet41]

Thank you my friend, I really appreciate that kind endorsement, but when I see some of the amazing art that people make with metal parts, it leaves me baffled... certainly gonna get involved in a few things though, and maybe I can develop a few skills in that direction as I go along - thanks for your support mate...

[@apf14378]

You guys like to get up early! btw, you should build your bike to your very own taste cos is the only way you will be most satisfied with the project, imho.

[@chrisrag1346]

Hi Del. I'm thinking that maybe by the time you've built that little console for the speedo that that might bring everything back into line! would seem a shame to mess with that back end! I think that looks really good. but as you said can't please everyone, and at the end of the day this is your bike. so it gotta be something you like. good to see them wheels came out ok LLAP

[@glennnicoll5309]

Do you mean zinc plating on the nuts ?

[@Moonfleet41]

No buddy, they were gold anodised if you look at the beginning of the video and the blasting process tore them back to bare alloy !

[@glennnicoll5309]

I hate to say but you can get gold zinc on steel nuts. I know this because I use to work with zinc plating.

[@glennnicoll5309]

Hey del they would look better if you gave them a high polish you know a real snap shine it would make the bike real showie looking .

[@Moonfleet41]

Blimey, that would be a rod for my own back aye lol... I've had polished wheels in the past, and they're like owning a high maintenance dog, they dominate your whole life lol !

[@glennnicoll5309]

true

[@melashkov]

powder cote

[@cloggsy1971]

Out of interest Del, how much was the media blasting?

[@Moonfleet41]

£20 a rim mate... local powder coating company did it for me !

[@Jay639.]

Hi guys, may i have postal address to send a plate, i have one i think you will like. great vids.

[@Moonfleet41]

Hi JM, that sounds interesting, presume it's not a UK plate... can I get you to email Penny on: [e-mail] and she'll sort you out with the details... cheers and thank you in advance!

[@Neils400]

The donor bike was one of the prettiest superbikes ever made. It's always going to difficult to aesthetically improve upon it... just sayin'

[@Moonfleet41]

It's a streetfighter my friend, they were never meant to be prettier than the original bike - just sayin' lol

[@Neils400]

true true. It's looking lovelier with each video - keep up the good work ;o)

[@KarlTheDingbat]

I think what is making the back end look a bit wrong is that the top of the tank is so flat, if when you put the speedo pod on you can add some curves to it, it will then make the back look right. I would also go for the paint on the wheels, it is easier and cheaper to rectify when you do get chips in them.

[@Moonfleet41]

Hi Karl, doing exactly that my friend, for exactly that reason... most people always default to powder coat, but it only takes one clumsy tyre fitter and you can never repair the damage!

[@daveg4495]

If you ever had a chain come apart under load, after you change your under wear, survey the very expensive repair job, stop cursing, you can thank yourself for being so thrifty!

[@Moonfleet41]

Had a chain come apart as a teenager due to my own damn neglect and being skint and I got away with it as it just fell off the bike and disappeared, so by my reckoning, that was my one lucky chance, not risking on having another one lol !

[@stevesstuff552]

Who was it said, "You can please all of the people some of the time, and all of the people some of the tIme, but you can never please all of the people all the time"? I enjoy most of your videos (the FRO videos are not for me, but that's your choice, not mine. My only comment is that it makes you seem like a grumpy sod ), just keep plugging away and there will be something of interest to most.

[@Moonfleet41]

Hi Steve, haven't done an FRO for a long time, as exactly like you said, I'm not a grumpy and it's not really me, it started out as a tongue in cheek kinda Victor Meldrew thing that took off a bit, it was a great way to occupy the ride to work, but I'm too busy in the garage nowadays anyway... thanks for your support, much appreciated...