MP9 Bhadaids Custom!

It's An MP9 So Sick It Reminds You Of That Holiday Dog You Wouldn't Let Your Kids Stroke...

[@blackmagic9896]

Just bought a used mp9 myself. Owner sold it because it couldn't fire more than 10 shots. Turns out the cup seal was ripped, ordered the Lees Presicion piston head now it runs pretty good other than the fact that sometimes the bolt doesn't come all the way forward, which doesn't activate the trigger and a new shot can not be fired. But thanks to your solution with the extra spring this problem also got solved! Thanks

[@romanterrell9519]

@Jaxxon Ashton Yea, I've been using InstaFlixxer for months myself :)

[@ignaciofrancis8806]

@Jaxxon Ashton definitely, I've been using InstaFlixxer for since november myself :)

[@yahirmaximilian4322]

@Jaxxon Ashton Yup, been watching on instaflixxer for since december myself :D

[@leonelryker6834]

@Jaxxon Ashton Yea, have been using instaflixxer for months myself :D

[@tuscan2280]

After 7 years as mp9 KSC owner....I would never sell it, and by the way I had the same issues as you shown in the video. But finally, a very good f....ing video on the mp9 !!! 🤟

[@locolama]

Finally some gas gun content.

[@matt6434]

Fine choice of tune! The whole blood machines ost is 👌

[@mitchfoe7653]

Accurate amount of swearing. This gun isn’t fun to fix AT ALL!Glad to see you covered so many issues on this legendary SMG.

[@koanwoonam]

I love your... Music choice Cool sound~ rock it 🎸

[@noelboumans4216]

Thanks for this info! I run the mp9 with a cqb bolt on hpa (semi auto mainly) and the recoil spring was not strong enough. Your vid helped me a lot! Best tech on KZbin for sure

[@brokencreationlordmegatrol3037]

i was literally having the wobbly barrel assembly problem yesterday then suddenly this comes up XD

[@ratstriplea3702]

Always nice to start the day to a Negative Airsoft upload. Great vid!

[@Georaga]

This was super useful and excellent timing! My piston cup just disintegrated and there are so many tips here that I just didn't know about!

[@RenwickCustomer10]

that tip involving moving the outer barrel, honestly, has just saved me literally fucking hours of grief. every time i've taken it apart i've had trouble inserting that bloody pin! THANK YOU

[@NegativeAirsoftTech]

first

[@AurAGFX]

nice

[@lordquan7161]

nice

[@martyguy8185]

Lol. Whats the tattoo on your wrist if you don't mine me asking. Also love the side angle shot

[@philtrysstrongman]

Wish my missus would say that

[@joshuasaunders3018]

beans

[@badfox1179]

Definitely my favorite KZbin channel this guys a beast

[@dunburr3597]

this video made me open up my mp9 to see if the bolt was hitting the back properly, good shit mate

[@Cipher057]

Gunna go check and do a fix of any thing i may of got wrong reassembling my MP9, cheers for this video!

[@Rick_Makes]

I was getting tempted to pick up an MP9 while watching this right up until you pulled out the TMPs at the end and I remembered which was the better looking gun.

[@jcbeat9296]

I’ve needed help with this for so long. Great video!

[@apathtrampledbydeer8446]

You are doing god's work! Thak you for saving my MP9 that Ihave yet to skirmish with!

[@WolfMan-nf4lv]

I can for sure agree with you that the MP9 with it’s correct integral grip is the only way to run an MP9. It feels wrong with the rail tbh lol. This’ll be very helpful should I invest into an MP9 myself one day.

[@MrJawsnclaws]

Another great video.. you total legend x

[@FXTRT1-1]

We need more GBB videos, loving these

[@Piotr_Czarnowski]

Ok, i have an idea. We all know how Negative love VFC and Gate Titans, so i think Negative should do a review /his impressions on Novritsch SR15. Thumbs up if you like the idea ;)

[@Oliboy22]

Going to admit I bought the CQB bolt for my MP9 and I used nuprol red just this weekend in it. Ive learnt quite a lot about my Mp9 in this video.

[@setsuna200]

You are The MacGyver of the airsoft industry.

[@Marticus518]

I bought this gun used a few months ago as my first airsoft gun. Tell you what, it's a headache with all the issues and upgrades needed, but this fucker is a blast to play with. It's like an abusive relationship where the sex is fucking amazing.

[@RandomGuyKev]

i enjoy ur videos a lot lol

[@philmak5830]

May i know did you test fire in this video using 134a or green gas? Also I thought there are two versions of the MP9s, one with KSC using 134a gas and a KWA that can use green gas properly. Keep up the good work and thanks for your videos

[@bestyoueverhad100]

I learn more drone this guy then any other fucking tech on KZbin...for fuck sake give this man a few 100k!

[@IratusSerpentus]

Good music choice

[@TheMuhh123]

What do you actually think about the aap-01 especially internal wise ?

[@ghostwalkerairsofttech1947]

Aap 01 rocks. It's good out of the box with .36 gram bbs. You need a 138mm crazy jet or 6.03 tb gbb barrel, a 50 degree maple leaf autobot and the hadron I key, the suppressor adapter (to cover the extra barrel length with a suppressor). With those components you can rock .48s out to as much or more than 120ft. Word of caution though...get the glock 18c extended mag or you will mag dump a standard mag in 2 seconds on full auto.

[@willowrabbit]

perfect, Just got a MP9 to work on.

[@patrickkuerbis8393]

Beautiful content and finally a FUCKING NICE DETAILED SHARP CAMERA SHOT

[@gajbedfixlastname1731]

6:06 airsoft magic trick

[@bradcoleman2574]

Hey there I was just wondering with all your experience working with Airsoft guns, what AEG would you recommend as the best for a second or third gun? (Not fussy about price just want to know what gun you would recommend if price wasn't a issue)

[@MrMisconduct]

Great video 🤟🤟👌👌👌👍👍👍your colorway looks epic!!! Would like to powdercoat or paint it the same Could you tell me the name or type of color? Greets from berlin

[@lordadmiralravenclaw1766]

I love and hate your vids, 1 second I like a gun and the next I wanna get it 🤣 another great vid 👌

[@ernstmeijer3067]

You are a airsoft gun surgeon love it.

[@redterror7242]

Have they fixed the loading nozzle in the newer ones? Looking to buy one

[@Skurzef]

Fancy new camera angle. Nice

[@tradesmith_yt]

Where’d ya go we miss you so seems like it’s been forever since you’ve been gone... please come back home! 🎶

[@c_m.f8164]

@negativeairsoft the music you had playing in this video sounds like it should be played with the astartes animation.

[@renumihai5263]

this toy did give me allot of problems, usualy the disconnector brake, it's so hardcore maintenance ... Wii Tech and RA-tech used to build aftermarket parts for this toy ASG(KWA) and KSC one

[@advanceddarkness3]

The mans a genius.

[@churchthecrusader]

He’s just built different y’a know

[@brokenpadgaming2538]

I want one. It's impossible to find right now. Can't find one, spare parts and I would like to give it to you for check and custom one day (in case...)

[@electronoob7428]

I need a high speed long motor for my m4. Any good motors that you recommend?

[@Casanova03]

What do you think about Elite Force IWI TAVOR CTAR

[@speedingwithsteeto5695]

Glad you dont have the virus!

[@veetalin]

Going to drop some dosh on those Lee's next month, and I think I have a few extra mag springs lying around... That's probably going to make a world of difference. Now if I can JUST figure out why it constantly overhops everything on green gas I'll be golden.

[@opairsoft8100]

Swollen packing. Kwa/ksc gbb should never be ran on green gas or any gas that has trash lubricant

[@veetalin]

@@opairsoft8100 Ahhh that might definitely be it. What would you recommend then? Strict fps/joule rules here means I can't go above 2.0 in green gas PSI wise.

[@kk771009]

can u sow how to and where to put those o rings m8 great content , u are a great help

[@umarcem]

Teach us master.

I had the KSC version many moons ago. I don't even know why I sold it. Wanted to try something else, I guess...

[@XpunisherX8152]

A video on the KWA MP7 someday?

[@Thahamster]

Nice video as always. The MP9 is a dream to play with as long as it works. I have heard people claim that loading the thing without locking the bolt back risk breaking to loading arm. Any guess if that may be true?

[@ritzcar9011]

S4zzie it is true in that you can wear down the bolt catch and eventually when you fire your last shot of a magazine, the bolt won’t lock back

[@Thahamster]

@@ritzcar9011 i don't know how common it is but it had that problem when I bought mine second hand. The catch works just like on a gbb pistol but the catch is must harder than the bolt and it is sharp, so it wears down the "ledge" which it catches on for every time you release the bolt. I tried rounding off the surface on the catch and I filed a new ledge on the bolt, but it worn down again. My MP9 is disassembled for the moment but I am planning on adding epoxy where the bolt meets the bolt catch so it hopefully does not wear down.

[@ritzcar9011]

S4zzie I haven’t run into that problem yet, I just lube it before every game depending on how much I shot the last one, I run hpa tapp so

[@Thahamster]

@@ritzcar9011 I'm glad that you haven't, and if you do experience it you now have an idea on how to approach it

[@NegativeAirsoftTech]

@@Thahamster Every gas gun has that issue if you 100% load the mag - always leave 2 bb's of space so that you can get a mag in without damaging the nozzle.

[@whale259]

Finally found a used one for a good price and seems to be in good condition (lol we’ll fuckin see) tan which isn’t my first choice but is the vert grip KWA model (: so happpyyyyy

[@ahahahahahahahahahahah___]

Hey negative, what do you use to record?

[@NegativeAirsoftTech]

Tablet

[@xXHAVOCUNDEADXx]

What low power drill do you use? Would make everything a lot simpler honestly.

[@xXHAVOCUNDEADXx]

As in for me lol

[@tomplumbridge3903]

Looking to get a gbbr any reliable brands you know of?... Love the mp9 i was looking into getting one at some point.

[@m6dspartan903]

I think the KWA is good

[@maglicairsoft4183]

KJW kc02 is pretty good

[@opairsoft8100]

Amazon Basic the lm4 system is literally the worst gbbr platform. We, ghk, kjw, vfc, vipertech, other wa base systems all beat it by miles (the s&t/agm/jg/double eagle doesn’t beat it, they are pretty meh)

[@MercutioUK2006]

Different camera angles! I was also going to get my head down but this appeared so here we are. Gotta say I haven't seen that kind of fine attention to detail anywhere else........I would still never buy one, but if I did I now know what the fuck is up. Noice.

[@miniman747]

Ey bruv Bought some old and collectible guns this weekend, thought maybe you could be interested in some of them. Can I send you some pics somewhere?

[@MrKieronwharton]

I really would like to send you my Specna H20,but i have no idea what to have done to it?

[@vyl-za]

I really want to run one of these as my primary, are they viable? It'll be used in semi 99% of the time, is the disconnector the main failing part?

[@m72ar]

Yes, but expect the disconnector to break every several thousand run or so even on semi only.

[@extevious]

The disconnector is the first to go normally. I suggest buying the steel upgrade, even if you use mostly semi. Swap out the stock one once it breaks.

[@ajfree79]

I fucking love Airsoft even if I didn't I'd watch your vids. 😍

[@hayfry9352]

holy cow this made me realize that my pistol needs a new recoil spring or a spacer!

[@maggotpraiswater]

What about propane? Is that good for most green gas pistols?

[@nivsen5986]

God I love mp9, but please no goddamn picatinny rails!

[@AwareWolfOnWheels]

I'd shit my Y fronts for a KWA M11 video like this!

[@TheRagingpotato1]

Where do you get the part for this?

[@tbgMaveric]

they're nice... but its no Kriss Vector though is it!

[@SneakSlayer94]

Unsure in the airsoft world but car world 134a is a refrigerant lol

[@cello1211]

Carpenter Brut >

[@isaacshively6705]

Will the trick with the rocket valve work on the MP7?

[@NegativeAirsoftTech]

yup

[@isaacshively6705]

@@NegativeAirsoftTech good shit

[@grillbar4]

i dont know if i have just been lucky but the only problem i have ever had with my mp9a1 is if im to agressive with firering either in semi or full auto it sometimes gets to cold so the firemechanism locks and just goes full auto with out touching the triggger. but thats usuall after dumping 2 or 3 mags i think thats okay considering im not taking to good care of it. its just a fun thing until it has a serious problem

[@eduardoprisbrey9157]

Negative is the krytac vector worth the money or nah?

[@happyrobot6396]

Eduardo Prisbrey it’s the only aeg vector on the market. I’ve heard the gearbox is a lil weird but definitely still upgradeable (for the most part).

[@opairsoft8100]

happyrobot that’s not true, ARES makes one called the coyote g2 and a&k make a hella unrealistic one.

[@NegativeAirsoftTech]

@@opairsoft8100 & they're all trash

[@ghostwalkerairsofttech1947]

THANK YOU!!! I have been saying this all along. People keep using the wrong fucking gas in these things. The hop rubbers are shit too. if you use green gas or ANY gas with silicone in it your hop rubber will fail straight away within 20 minutes of play. I fixed one of these for a guy told him what gas to use. Within a week and 20 minutes on the field he was calling me to fix it again. "what gas did you use?" Duh valken green gas- sure Im gonna fix it again and its gonna cost you 30 bucks...Im happy to take your money but if you keep doing what I tell you NOT to do you might as well learn to fix it yourself 'cause Im not gonna do it anymore. as for the recoil spring issue...the force of the bolt gong forward is more than enough to compensate for the lack of spring strength. thats what i found anyhow after playing around with diff springs and short stroking.

[@NegativeAirsoftTech]

Lube won't ruin the rubbers, that's just not true. The rubbers in these suck, use a guarder rubber.

[@ghostwalkerairsofttech1947]

@@NegativeAirsoftTech well have to agree to disagree...my customer used silicone green gas in the gun and the hop rubber soaked up the silicone so bad it swelled up and wouldn't hold a bb to save its life. Others have had this experience as well particularly the japanese model. The hop rubber just lose their structural integrity. And the japanese model guns require a completely different hop rubber than the tw version.

[@NegativeAirsoftTech]

@@ghostwalkerairsofttech1947 It was a batch issue, certain oils & so forth used in the creation of certain rubbers are on the no no list of sanctions placed after WW2. The rubber will swell up regardless of what you do, the Japanese rubber is unaffected however the TW versions that KWA & ASG buy up are compiled from lesser quality parts & that includes the hop rubber & the seals in the fill valves - this is why so many KWA mags have issues filling with gas very much like the early WE 1911 mags & often cannot fill past 10 or so shots. Recently this issue has been put to rest by companies such as Army by buying in rubber seals from outside of the sanctioned zones -that's why they have transparent seals in their mags over nitrile seals ;-) The early ASG & KWA manuals would tell you not to lube your hop rubbers where-as they no longer do (again, batch dependant) which is where the rumour that lubing your hop rubber causes breakage comes from. By installing a Guarder rubber into the gun for the cost of about $8 all these issues go away & the gun will hop properly.

[@ghostwalkerairsofttech1947]

@@NegativeAirsoftTech great info Luke...I do lube hop rubbers that is what sent me sailing down this road of using the proper gas in the mp9. And being the japanese model hop rubbers were so hard to come by I didn't want to risk the customers only replacement. The hop rubber for the Japanese model if I recall is larger than the tw model, so a standard size hop rubber will not work in this particular gun. Same for the sealing cup, the tw version is round, whereas the jp version is oblong.

[@robevans106]

Got a link for the gas?

[@dakutazbixa9693]

What would you change in a ARP9 from G&G?

[@NegativeAirsoftTech]

Everything, get a proper looking AR.

[@dakutazbixa9693]

@@NegativeAirsoftTech sorry i love it being so small, perfect for cqb. But what about the internals? I would love to send it to you and say Just make it better but i live in a Belgium So i dont think its possible 😞

[@kieranjones4870]

I love your work, I am self teaching tech work ready to be fucked by the world! Can you recommend me a barrel to put in my own tippmann m4?

[@hayfry9352]

sick video!

[@neffels8768]

bruh you posted this 18 seconds after the video was put up you havent seen shit

[@NegativeAirsoftTech]

@@neffels8768 I was just about to say that!

[@boerseun9868]

lol😂

[@cmarriott3835]

Bum sausage

[@rodrigomf91]

I would like to live in uk to send you my WE SCAR-H and my VFC 416c and m27 to fix the problens I have with those guns...

[@Spollekop]

Send him a message on Facebook. You have a better chance of him replying there.

[@rodrigomf91]

@@Spollekop yeah maybe but the problem is, I don't live in UK hahaha

[@antesifner3574]

BTC=or better than Gate...

[@southmoreconlin3757]

Vid?

[@roythescrub461]

8:00 Fuck me, where was this video when I was desperately trying to get that pin all the way in? Was pausing and watching others on yt reasamble is so closely but like you said, they don't show you that part..

[@southmoreconlin3757]

last!

[@moonhead6165]

a fucking PINK drill?

[@neoconker]

KSC or KWA? Who makes the best Mp9?

[@MrMisconduct]

Worst music ever but nice review 👍👍👻

[@TheAsianOfChaos]

It’s KWA what do you expect it to work lmfao

[@NegativeAirsoftTech]

It's not...

[@TheAsianOfChaos]

Negative Airsoft boy do I know it lol I tech tm mws rifles for my team and someone in my team got a LM4 that shit was fucked from the factory torn bucking bent tensioner and a scratched to shit inner barrel

[@NegativeAirsoftTech]

@@TheAsianOfChaos I mean it's not KWA.. ;-)

[@TheAsianOfChaos]

Negative Airsoft lol kinda

[@adamball3676]

ASG you mean?