Multi-Camera Editing in DaVinci Resolve 16 | Multicam Crash Course

[@JasonYadlovski]

MULTICAM in DaVinci Resolve 18.6 - Check out the UPDATED Version! kzbin.info/www/bejne/bZ-uaKedjtifetksi=giHjOSIBIZR5Yf2K

[@MihaiDesigns]

Finally, a high quality in depth tutorial on multi-cam. Love it! Thank you

[@JasonYadlovski]

You’re welcome! Glad you found a video helpful! Thank you for watching!

[@BlueLineFive5]

This tutorial is the gold standard for Multicam work in Resolve. Belongs in the official BMD archive. If I've been away from Multicam work for a bit I review it every time before jumping in. It's just that good. Thanks Jason!

[@JasonYadlovski]

Awesome, thanks for your kind words! Doing my best to help people out. 😁👍

[@kiterway3592]

FINALLY a comprehensive explanation of multi cam

[@JasonYadlovski]

Thanks! Did my best to break it all down, hope this helps! Would love to hear your feedback after watching the video. 👍😁

[@highpointaerialimages3599]

I have watched DaVinci Resolve tutorial videos from many KZbinrs. Your videos are by far the most easy to understand and follow. I am learning so much on how to use DaVinci Resolve for my videos from your tutorials. Thanks so much and keep up the great work!

[@JasonYadlovski]

Awesome, thanks so much for the feedback! I’m happy to hear my videos are easy to understand and follow. Thank you for watching, I appreciate it! 👍😁

[@1MarcVD]

A very thorough tutorial on multicam editing. Especially your troubleshooting aspect of the video was very helpful. That you are aware of the possible occuring problems and solve them in advance for others is what makes you a very good content creator on these kind of tutorials. Most of the time people lose more time on solving problems than on the understanding of the subject itself.

[@JasonYadlovski]

Thanks! I do my best to help with common issues. I get hundreds of comments asking for help troubleshooting and it's often the same things people have problems with. Doing my best to help the community!

[@KavanaghGTR]

I've watched a LOT of DaVinci Resolve videos and this is one of the best I've ever seen. It's clear and properly explained, there's no timewasting intro, it's indexed, it's all I could want in a video of this sort. Thanks.

[@JasonYadlovski]

Awesome, thank you for your kind words! I appreciate it! I do my best to provide the most value possible in my vids. Thanks for watching!

[@pampurrs88]

Jason, I have watched a couple videos on this topic from some well known KZbinrs and Resolve instructors, and this is the first time it all makes sense to me. You do such a fantastic job of explaining things. Thank you!

[@JasonYadlovski]

You're welcome! 👍😁

[@randallmacdonald4851]

Jason, you went so fast through it all. But, that's what really helped. Please, keep up this style. I can ALWAYS scroll back on KZbin to slow things down to take notes. BIG thumbs up.

[@JasonYadlovski]

Thanks! I appreciate you checking out the video!

[@lexvdn]

Jason, thank you soooooo much! You explain just everything I wanted to know: using multiple cams, align using audio (I don't have timecoding equipment), color grading and using an external audio source (mic). Not just everything I wanted to know but also explained very clear and understandable for a beginner like me. Thank you again!

[@JasonYadlovski]

You’re welcome, that’s great! I’m happy to hear I was able to help you. Best of luck on your project and thank you for watching!

[@shokarempudi4909]

I paused as you went along and did the steps myself and that helped a TON.

[@JasonYadlovski]

Great!

[@boyztoyz121]

Best intro to multicam I've seen. Wish I'd found this video sooner.

[@JasonYadlovski]

Awesome, thanks! Glad the video was helpful! 👍😁

[@MatthiasHeil]

@@JasonYadlovski Best teaching experience ever. Thanks ever so much, Jason!

[@JasonYadlovski]

Wow, I’m honored you’d say that. Thanks so much! Glad you found the video helpful! 😁👍

[@osmumos]

Four words Jason! You are the best! I came across your videos while searching for tips on how to edit multicam clips and I got hooked! You have energy and passion, and above all, you explain complex concepts with simplicity and clarity. Thank you!

[@JasonYadlovski]

You’re welcome! Welcome to my channel, it’s great to have you here! i’m happy to hear that you’re finding by videos helpful. 😁👍

[@davepac7]

I wish I could give you 100 likes! I've been going through so many DaVinci Resolve Multicam tutorials and yours was the only one that included all what if scenarios.

[@JasonYadlovski]

Awesome, glad my video covered everything for you! 😁👍

[@TheRealRHDuggan]

I just want to thank you for making these fantastic tutorials! I'm new to DaVinci Resolve and pretty new to video editing in general. I've taken on the task of making videos of our high school marching band and incorporating drone footage together with ground footage. I think this particular video saved my sanity!

[@JasonYadlovski]

Yes! Multicam is a great way to sync up your footage and then just change angles by your watching back the video to show what you want to show. I hope it all works out well for you, thanks so much for watching!

[@examplewastaken]

Such a great video! The troubleshooting part is something that I miss in most tutorials! That's not only a tutorial for Multicam editing but for making tutorials themselves! Keep it up!

[@JasonYadlovski]

Awesome, thanks man! I appreciate you checking out the video! Glad you found it helpful! 👍😁

[@jorgenudvang3507]

Best multicam tutorial ever. Wish I'd seen it a couple of weeks ago. This will save me tons of time.

[@JasonYadlovski]

Thanks so much for your kind words! Glad the videos helpful! Thanks so much for watching, I appreciate it. 😁👍

[@VlogrBlogr]

Dude I love you, you're single handedly saving my career.

[@JasonYadlovski]

😄 awesome! Glad my videos are able to help you out, thanks for watching! 👍

[@Zw1d]

if it's actually your career, i think you should tip the guy...

[@thaddeuscorea]

Thank You!!! I make live performance music videos, multicam (4 cameras). I record the audio simultaneously in multi-track software. I mix down the audio and then import all the camera angles and the new audio final mix at the same time. I use audio sync bin. I need tips on how to shoot more smoothly on my handheld camera. Your video tutorials are excellent! Thank you for the troubleshooting section at the end too.

[@JasonYadlovski]

Awesome, glad the video is helpful! sounds like the perfect tool to use in order to make your music videos. Thanks so much for watching sharing your workflow!

[@dandelionmoodable]

Most useful 30 minutes of my day! Thank you very much Jason, this content is just great.

[@JasonYadlovski]

Awesome, thanks for your kind words! Glad the video was helpful! Thanks for watching!

[@carlosreyesf19]

26:27 what can I do if I have 2 audio clips that I need to use? It was a Zoom interview, so I recorded my own audio and the other person did as well. I need to be able to select easily what audio to use in each cut. The slow way would be delete the audio that I don't need in each cut.

[@JasonYadlovski]

Hi! So you can set the multicam angle switcher to use only the audio and not the video. Take a look at this video around 26:36 and you'll see 3 icons centered just below the multicam window. The first is to cut the video only, the second is to cut the video and audio and the third is to cut the audio only. If you need to change the audio after you made the cuts, you'll have to select the clip, right click, then change the 'multicam angle' in the popup menu. Is that helpful?

[@carlosreyesf19]

@@JasonYadlovski thank you very much! I will give it a try!

[@ImBasicallyJesse]

Holy I feel like every single video you make helps me a lot, I’m getting a PC on Saturday and I’m going to be using this for my editing program. Love the videos thanks

[@JasonYadlovski]

Awesome! Glad you find the videos helpful. Good luck with the new PC. DaVinci Resolve is great and it can do so much. I learn something new almost every time I’m in it! 😁👍

[@83unstoppable]

You save my life Jason! I got a multicam video to edit and it took almost 4 days, now my next jobs gonna be better.Big thx

[@JasonYadlovski]

Awesome! Glad you found a video helpful! 👍😁

[@VINIT_5]

Best video with everything what i wanted to learn 🙌🏻🙌🏻 thank you for making my life a lot easier sir 😁

[@JasonYadlovski]

You’re welcome! That was my goal, put all the info in one spot for you. Best of luck with your project and thank you for checking out the video! 👍😁

[@roehaus1]

Another great one Jason... I've been struggling with trying to use multicam for months watching various videos on how to do this. 1/2 hour after watching this video... I was editing in multicam! I also wish that I could give you a hundred likes.

[@JasonYadlovski]

Thanks! Glad the video was helpful! I've got to make an updated video on this. 😜

[@JasonYadlovski]

🎥 Check out the Description to Jump to different sections of the video! 🎥

[@JasonYadlovski]

How many cameras do you use for your multicam setup? 🎥 🎥 🎥 😁

[@bfjoutdoors]

@@JasonYadlovski I tried a 38 clip Multicam where I am always recording from at least one camera at all times over the course of 40minutes but it was a little much for my i7 1065g7 on my laptop... Great videos! Subscribed and you're making me want to start my channel. What skin are you using for resolve? I am using resolve default and its a lot different than yours.

[@JasonYadlovski]

🤷🏻‍♂️ sounds ok on my end. Not sure why it doesn’t sound right for you. 🤔 Thanks for watching!

[@JasonYadlovski]

@Gus Erland I don't know Gus, I'm not seeing it even at 1/4 speed. It still looks ok on my end. I appreciate you sharing your observations and thoughts. Best of luck with your videos!

[@joshuacovert4540]

@@JasonYadlovski Looks good to me as well. I joined youtube just so i could say that. ;)

[@motion.resolved]

This video has been so useful for me over the past day or so - I'm just digging through old footage of a live gig I recorded with multi cam and I never got round to editing it. I have a live audio feed from the sound desk at the club and 3 cam angles - and this video has really perfectly explained how to match everything up and how to use it on the timeline. Downside for me was that all the 3 camera angles had issues where the camera was stopped and restarted, plus it was very loud and the mics on the camera were overloaded so could get a good auto match on audio, it was painstaking to match up, but it worked out well after watching this! Cheers!

[@JasonYadlovski]

Awesome! Glad you found this video helpful, pretty sweet that you got around to editing some old footage. 😁👍 thanks for watching!

[@motion.resolved]

@@JasonYadlovski Just subscribed too - yeah - the gig was in 2013! I've only recently got back into editing as a hobby and glad I've got some old footage lying around to play with... I picked up the Studio and Speed Editor deal too - which I'm really happy with! Once again, really appreciate your video! Cheers

[@JasonYadlovski]

Awesome, thanks for the sub! 😁👍

[@carolynhanlon4205]

Thanks so much! The "Speed up a slow Computer for Faster Multicam Editing " was a life-saver!

[@JasonYadlovski]

You're welcome! Thanks for watching and I'm glad you found it helpful! Best of luck on your project!

[@mitchmedmedia5386]

OHMYGOD this is gold. I’m realizing how much time I’ve wasted but layering multiple angles and cutting/disabling the ones I’m not using 🤦🏻‍♂️ Thank you for this 🙌

[@JasonYadlovski]

You’re welcome! Thanks for watching the video! Glad you found the video helpful! 😁👍

[@Ioraek]

Exactly how I have been doing things! I'll be moving to Resolve soon and this is going to be suuch a nicer way to edit! Cheers Jason

[@JasonYadlovski]

Awesome man, multicam is easy in Resolve as long as your computer can handle it. 👍

[@Ioraek]

@@JasonYadlovski Currently it wouldn't handle it haha! But pc is also in the upgrade path. Btw, I think you're great at judging the right amount of detail to go into and at predicting the kind of questions people will have. I think at least 2 times during your video I found myself think "oh cool. hmm, I wonder how one would..." only to have your vid answer the question I was thinking within the next minute. Fantastic stuff. Subbed.

[@JasonYadlovski]

Awesome man thanks so much for the sub! I really appreciate it. Hope you find lots of great info in my channel 👍😁

[@HikingWithCooper]

This...is...amazing! I did the BM course and it took about 45 minutes. This gets to the point so much faster so it can be used as a resource to go back to when needed. Thank you!

[@JasonYadlovski]

You’re welcome! Multi cam is fun to use here and resolve and once you get the hang of it it’s not so hard. Glad you found a video helpful and best of luck on your project! Thank you for watching! 😁👍

[@thepaulsuarez]

This is great. I've recently started using Resolve after using FCP and Premiere for years. This was exactly the multicam tutorial I needed. Thanks!

[@JasonYadlovski]

Awesome, you’re welcome!

[@ColjaCarls]

Very well structured and nice that it has chapters! Helped me several times and saved tons of time!

[@JasonYadlovski]

Awesome man that’s great! Thanks for watching and dropping a comment! 😁👍💯

[@bartclan]

Thanks SO much for this very complete tutorial. Davinci novice, but I've been editing video for over 30 years, and your explanation on multicam syncing and editing was excellent. You gained a subscriber today!

[@JasonYadlovski]

Awesome, you’re welcome! Thanks so much for the sub and I’m glad you found the information helpful! Thanks so much for checking out my channel!

[@davidgerlach4973]

Thank you! Helpful. I made the switch to Resolve from FCPX, where multicam was pretty straight forward. Your tutorial was slow and thorough--I appreciate that. I'll refer back to this as I get used to multicam in Resolve.

[@JasonYadlovski]

Awesome, welcome to Resolve! It's an awesome program. Thanks for checking out the video! I've got lots of other videos if you need any more help. Thanks for watching!

[@BEERNBBQBYLARRY]

So much useful information in a single video. Thank you!

[@JasonYadlovski]

You’re welcome! I try to make it a one stop shop. 😜😁👍thanks for watching!

[@samuelvilz]

This is a phenomenal tutorial. You made multi-cam editing look easy but making this tutorial must have been a lot of work! Thank you very much, Jason!

[@JasonYadlovski]

You're very welcome! Glad you found the video helpful! Thanks for watching!

[@julers1000]

Great tutorial on working with Multi Camera clips! Thanks!!

[@JasonYadlovski]

You’re welcome!

[@atanupalit6337]

Thanks Jason. This is a lifesaver. Finally found a video with a detailed info on multicam editing.

[@JasonYadlovski]

You’re welcome! Glad you found the video! 👍😁

[@LeftCat]

Awesome tips! The keyboard switching will really speed up my workflow!

[@JasonYadlovski]

Yeah man! Multicam is fun....as long as the computer can handle it. 😜

[@kelvintan821]

Answered all my questions regarding editing multicam video. Thank you so much man!

[@JasonYadlovski]

You’re welcome! Thanks so much for checking out the video and dropping a comment! 😁👍

[@sjps5511]

Thank you. Very helpful.

[@JasonYadlovski]

You're welcome!

[@jorgeordonezautomotriz]

Awesome! thank you for the video!

[@JasonYadlovski]

You’re welcome! Thanks for watching!

[@Juan2Wheels]

Holy crap, I've been doing this manually and this video is going to save me a lot of hours! Thanks for your great work I've been learning a lot

[@JasonYadlovski]

You're welcome! Yeah, the multicam in Resolve is pretty sweet and works great if you computer can handle it. Thanks for watching!

[@kinggeorge9442]

Even though this was for Davinci Resolve 16, still works great for 18, Using this and another video I found on getting the best green screen chroma key have really helped my show. Thanks again for your tips and your continuing content.

[@JasonYadlovski]

You're welcome! It's on my list to update this video. It could use a refresh. 😜

[@kinggeorge9442]

@@JasonYadlovski just a suggestion, if it's worth anything to you. For the refresh, maybe mention the green screening and adjustment layer earlier in the video, like after the how to with the cut tab and edit tab.

[@BlueLineFive5]

Triple thumbs up 👍👍👍. Extremely well done. The Troubleshooting segment is genius. Thank you!

[@JasonYadlovski]

You're welcome! Glad you found the video helpful! Tried to include everything in there. One stop shop! Thank you for watching! 😁👍

[@Greenthum6]

Great tutorial! Watched 20 mins and was off to combine three helmet cam footage together with ease. Last part of the tutoriam was about performance which I fortunately don't lack:) The flow in Resolve makes sense, but creating the multicam clip in the first place wouldn't have been easy with help. Thanks!

[@JasonYadlovski]

Awesome, hope your project worked out great!

[@Armadillopepper]

Really helpful. Thanks.

[@JasonYadlovski]

You’re welcome!

[@pindab0ter]

Amazing tutorial! Doesn't only cover the basics but a few edge cases as well. Goes over different possible work flows rather than just your own preferred one, using both keyboard and mouse. Very well done!

[@JasonYadlovski]

Thanks so much for checking out the video! I appreciate you watching and leaving a comment. Best of luck with your multicams! 😁👍

[@cvj2188]

I think I love you now. I just need to say thank you because I was ready to shoot myself, lol. I don't know how many of your videos I watched because editing is confusing, lol. But it was all able to get done at finally render. I appreciate the time you put in to helping the rest of us that don't understand.

[@JasonYadlovski]

You’re welcome! Glad my videos helped you out! Helping people is why I started this channel and I’m grateful for all who view my videos. Hope your project turned out awesome! 😁👍

[@cvj2188]

@@JasonYadlovski it turned out all right but there's room for improvement. I do have a question on what do you do when you've created a multicam clip but when you take it over to edit it stop coming up as two merged videos in the timeline and then no longer wants to sync for editing in frame match. I deleted it started over many times but that issue still pops up.

[@JasonYadlovski]

I would recommend that you make a multicam clip in the Edit tab, not in the Cut tab sync bin. I find that generally you will end up in the Edit tab anyway and I feel like it's a better workflow to do everything in Edit. I haven't had any problems in the Edit tab and I don't really use the Cut tab much, so I'm not sure why it would be doing what you mentioned.

[@fabsac86]

Thank you very much Jason! This is the best video that explain well how to do a perfect multicam editing. Like usual your videos are smart, fast, and very comprehensive. You helped me a lot.

[@JasonYadlovski]

You're welcome! Thanks for watching and I'm happy to hear the video was helpful!

[@CJSaVon]

MY MAN!!! DUDE... You Iz The Man. I have searched for quite awhile. No Results. Then I watched this. Very informative. Thank You.

[@JasonYadlovski]

You’re welcome! Gotta get my videos higher in search! 😜 thanks for watching!

[@kirstenschneider6875]

Jason, thanks so much:)- this helps 150% to create my online yoga video course! Thank you!

[@JasonYadlovski]

Awesome, that’s great to hear! Best of luck with your course! Thanks for checking out the video, I appreciate it. 😁👍

[@hveliorum8252]

Very detailed and helpful tutorial, thanks a lot!

[@JasonYadlovski]

You’re welcome!

[@rcxotic1]

Thank you! This video is insanely concise and informative. All I need in one shot.

[@JasonYadlovski]

Awesome! That's what I was going for. 😁Glad the video was helpful! Thanks for watching!

[@peterrush9298]

Exactly what I need fantastic - really comprehensive. My numeric keys don't cut or switch view though even though they are set up to do so in the keyboard customization sadly

[@JasonYadlovski]

Awesome, glad the video was helpful! I don't know why the number keys wouldn't work for you. I haven't had a problem with it assuming the keyboard shortcuts are set yup that way. Thanks for watching!

[@GfastGao]

No doubt, the most high level content about davinci resolve! Thanks a lot Jason!

[@JasonYadlovski]

Wow, thank you for your kind words! I don’t know about that but just doing my best to help people. 😁👍 Thank you for watching!

[@Akkigraphy]

It's a coincidence that it's not what i was looking for but definitely needed this for my next video project. I wasn't even aware of such functionality.... this is going to be super helpful for my next video on my channel Akkigraphy. Thanks for sharing it.

[@JasonYadlovski]

Awesome! I use multicam often and it works great. 😁👍 thanks for watching!

[@Akkigraphy]

@@JasonYadlovski waiting for the live stream tomorrow

[@JasonYadlovski]

Are you talking about ResolveCon? If yes, it’s on Friday. 😜

[@jburch5752]

I used to be a school teacher. The teaching model you have is excellent.

[@JasonYadlovski]

Thanks! I appreciate the kind words! Thank you for watching! 👍😁

[@jburch5752]

@@JasonYadlovski I also put you on my notification bell.

[@JasonYadlovski]

@@jburch5752 Awesome, thanks!

[@EdwardKilner]

Very worthwhile video. Maybe a bit confused when you went to the Edit page section. You might have been better to just do a clean start rather than go through the gyrations you did. I got lost, was saying what is he doing? But definitely a keeper in my saved file list. Thank you.

[@JasonYadlovski]

Thanks!

[@samuelgerkin]

Absolutely stellar tutorial! You are the best!

[@JasonYadlovski]

Thanks! 😁👍

[@braindigger1]

Awesome tutorial, thanks!!!! What is the best way to organise files and set up my timeline to use your multi-cam tutorial with multiple clips on each video channel?

[@JasonYadlovski]

Hi, Thanks! Here’s the general workflow I use: kzbin.info/www/bejne/b2jMqYWHa9Jlnqs Once you creat the multicam clip, just add it to the timeline and edit normally. I don’t do anything special with multicam vs regular footage.

[@matttttt63]

Jason, this is incredibly helpful. Thank you.

[@JasonYadlovski]

You’re welcome! Glad you find the video helpful!

[@matttttt63]

@@JasonYadlovski Comes back for refresher. Still super helpful. Still thankful

[@JasonYadlovski]

Awesome! 😁👍

[@RoadReality]

HOLY CRAP! I just got a second camera and plan to do multicam vlogs and videos in the future... and this video is a GAME CHANGER! THANK YOU JASON! As a test, I shot footage holding both cameras (I wanted to do a side-by-side video comparison between the two GoPros (video on my channel if you want to see, or I can edit this comment if you don't mind it being in-line here). I brought the footage into Resolve, manually lined both clips up in the Timeline, and then sliced & diced. This multicam stuff is SO MUCH EASIER and FASTER!!! Also, I agree with you - multicam in the Edit tab is WAY faster and easier than the Cut tab.

[@JasonYadlovski]

Awesome man! Glad you found the video helpful! The multicam feature is awesome.

[@RoadReality]

@@JasonYadlovski Oh, you have no idea. I literally followed along here at home with my own 2 clips. I ran into some stumbling blocks, but nothing I couldn't figure out (what I was doing wrong). This is gonna lighten my workload. FWIW, GoPro didn't tell anyone, but the Smart Remote is not compatible with the Hero 9, so the one I bought is only useful for my Hero 8, and thus I'll be recording full rides again instead of just clips, so my workload went way up.

[@JasonYadlovski]

I saw the video you did about the new GoPro and the smart remote not working. Great video. At least now you've got a way to speed up editing a bit since you've got to record more footage. 😁 I was just at a bike shop today to pick up some oil for my Leaf Blower (They sell Sthil stuff too) and was checking out all the bikes, atvs and dirt bikes. One of these days I've got to get back into it. 😜 For now I've got to stick to ripping around on my kids Yamaha badger ATV, lol. Better than nothing!

[@RoadReality]

@@JasonYadlovski I would love for my kids to get into dirt bikes and ATVs when they're old enough ... first I need some land LOL. There's nowhere close by to ride them, sadly. Thanks for checking out my video - glad you enjoyed it!

[@0oTHEJACKo0]

A couple of things I would really love to be added to Davinci, especially regarding multicam, since I use it quite often: 1. Tracks get automatically named after the first clip contained in that track. Hence the angles are automatically named then as well in the multicam view. 2. I can order the tracks with a keyboard shortcut, and not with tedious right click + move track up or down (repeating this step countless times depending on where I want the track, and how many tracks I have. I often have 10-20 tracks in a single project, even in multicam). Something like alt + dragging the track to give them a order would be a blessing for us all. 3. A way to sort the angles the way I want in multicam view. There is only 1x1, 2x1, 2x2, 4x4 etc. as an option. But what if I want to only use certain angles like the 1st the 3rd and the 8th? Since using all of them (especially in 4k) is quite heavy on my resources (I got pretty good PC components, but of course for 4k resolution and 8 different multicam angles, I need the option to regulate the multicam view on my own. What davinci offers is not enough. Proxy mode quarter resolution doesn't help much. Creating optimized media can also be tedious and takes a lot of space, even though it's only for that project temporarily, I refrain from using it too much. Showing only the angles I want in that moment would be far more helpful for me) what do you guys think? You got any ideas?

[@JasonYadlovski]

Hey man, great suggestions! Thanks for sharing. The only workaround I could think of is that if you only need say 3 angles for a part of the video instead of all 8, make multiple multicam clips with fewer angles in them. Maybe that would help ease the load a little. I don't use multicam a ton and it's very taxing on my machine with only 3 angles and 1080 footage. Anything to east the load would be welcomed. Best of luck on your projects!

[@fredebong6989]

Funny how I avoided this workflow like a plague until I was forced to use it in final cut for a client project. Thank you very much.

[@JasonYadlovski]

You're welcome! I think working with multicam in DaVinci Resolve is pretty easy after you do it once or twice. My biggest problem is my slow computer. 😜 Thanks for watching!

[@RachelMasters]

This is one of the most helpful videos I've watched on editing software, thank you, this was exactly the info I was looking for.

[@JasonYadlovski]

You’re welcome! Thanks for watching! I’m glad you found a video helpful. 👍😁

[@dudefromthedu]

I've watched several videos... but this has been the best video ive seen so far! you just got my first "smashed like button and subscribe of 2021

[@JasonYadlovski]

Hi NuMega, thanks so much for your kind words! Thank you also for the sub and like, I appreciate it! 😁👍

[@kevind2423]

I'm now a subscriber thanks for the help

[@JasonYadlovski]

Awesome, welcome to the community! Thanks for the sub and I hope you find lots of valuable content! 😁👍

[@H76Pro]

Excellent video! addressed all my questions about Multicam editing! very clear and easy to follow!

[@JasonYadlovski]

Thanks! I appreciate you checking out the video! Glad it was helpful!

[@ch-vs3fw]

Jason! THANK. YOU. SO. MUCH. This video is immensely helpful to me! I appreciate you!

[@JasonYadlovski]

You’re Welcome! Thanks so much for watching, glad the video is helpful! 😁👍

[@Rexxthespecialist]

After 3 years still relevant info. Thanks

[@CoffeeTalkandTechJohnRyan]

Ok soooo I did it! Thanks to you last video I did on JBL speakers used 3 camera views. Worked great. I'm excited to use the new skill more and more. Thanks!

[@JasonYadlovski]

Awesome man, that’s great! Thanks for the update! 👍😁

[@FuegoPazzo]

Thank you so much, I am going to play around with this tomorrow. This is really going to up my game :)

[@JasonYadlovski]

You're welcome! Multicam is awesome. 😁

[@g51-t5l]

Hey, why isn't this channel not being recommended by davinci resolve people? Such a fantastic channel. By the way, most awesome video on multiple Cam..

[@JasonYadlovski]

Hey, thanks! I'm not sure, hopefully KZbin will start to push it out there more. Little by little it has been growing. 😁 Thanks for watching!

[@jaypillay8380]

Brilliant video covering all aspects about multicam editing. A huge help and going to save a ton of time in editing, keep up great work with these tutorials

[@JasonYadlovski]

Thanks! I’ll keep at it! Subscribe if you have already! Thanks for watching! I appreciate it!

[@jaypillay8380]

@@JasonYadlovski Subscribed :)

[@JasonYadlovski]

Thanks man!

[@PianomanDarrell]

Super helpful video! Thanks so much. I've followed your steps and now have my multicam video all edited. When I render the complete video, I get glitching in various places - every time is different. I don't care if it takes a long time to create the final file but how to stop this glitching???

[@JasonYadlovski]

You’re welcome! What render settings are you using?

[@PianomanDarrell]

@@JasonYadlovski It's all pretty much the "custom preset." I'd rather use the KZbin preset but there's no option to burn in subtitles. ((quicktime, H.264, 1920x1080HD, Frame Rate 60, quality restrict to 10000, profile/mode AUTO, key frames AUTO ---- and Subtitles are being burned in))

[@JasonYadlovski]

Thanks, I would start by boosting the quality. Maybe double it to 20,000 and see if that helps.

[@PianomanDarrell]

@@JasonYadlovski Thanks! I'll try that.

[@cressandreevich4036]

Hello! Great guide! I encountered this problem: there is no synchronization of the slider on the master timeline and in the multicam timeline (inside, where all the tracks are visible). How to solve this problem? so that when I open the multicam timeline, I would see the same moment as on the master timeline? I am sorry for my English)

[@JasonYadlovski]

Hi! I’m not sure that the playhead will by in sync like that. It would be convenient, I’m just not sure that it works that way at the moment. I’ve been doing a bunch of multicam work lately, and have noticed the same thing.

[@cressandreevich4036]

@@JasonYadlovski Thank you! This function is very convenient and it is included in the premiere. Often helped for accurate synchronization when working with a large amount of material. I hope this will be added to Davinci in the future)

[@mattboggs6304]

Thank you Jason. Great video, very helpful.

[@JasonYadlovski]

You're welcome! Thanks for checking out the video!

[@gentleartsnz]

Great video but at 22:10 how did you get all your multicam angle changes back in the timeline view? I'm super new to all this and you "jumped back to the edit tab" but then the view changed and I couldn't see what you clicked or whatever? Sorry if this is a real basic dumb question but I'm trying to watch and learn and I'm stuck...

[@JasonYadlovski]

Hi! Thanks! Along the bottom of the DaVinci Resolve window is a bunch of icons. The third one in from the left is the edit tab. That's what I clicked. Each icon along the bottom will bring you to another tab. The order is Media, Cut, Edit, Fusion, Color, Fairlight, Deliver. Hope this helps!

[@munavvirbm.]

Your discription is awesome 🔥👌👌 Thanx sir for more info.. subscribed

[@JasonYadlovski]

You’re welcome! Thank you for the sub! Thought it was a good idea to let people jump to what they want to know. 👍😁 thanks for watching!

[@UneasyRider]

What a great tutorial! I'll be editing multi cam for the first time and will use this as my guide. With regards to optimisation and cache, do I need to switch these off and back to normal when doing my final render for you tube?

[@JasonYadlovski]

Hi! Thanks for checking out the video! No, you do not need to turn off the optimizations or cache, Resolve will use the full res files and full res everything else for rendering, unless you specify otherwise. All the optimization is just for smoother playback. 😁

[@AdamRiviere]

Excellent Video!! I recently took video of a performance with 3 cameras and I want to utilize all three cameras' audio tracks and simply mix them to the final audio I want to use for the finished product. My only approach is to copy and paste the various audio tracks into timeline 1 and mix from there, and would like to know if there is a better approach?

[@JasonYadlovski]

Thanks! Sure, I would use a multicam clip. You can have it change audio along with the video if you want. If you want to hear all three audio tracks, add just the audio to the timeline outside of the multicam clip. Hope this makes sense.

[@AdamRiviere]

@@JasonYadlovski makes perfect sense, thank you!!

[@cbk152]

Awesome video dude...could you also make a multicam video edit tutorial for music cover videos?

[@JasonYadlovski]

Thanks! I would if I had a band to film a multi-angle music video of. 😁 I would basically have the band play the song a few times and get as many different video angles I needed. Then I'd use a good recording of the song to lay under the video. Sync it all up, make my cuts and we'd have a music video! Of course there's more involved, but you get the idea... 😁

[@AdrianDelosReyes]

Another great video 🙌🏾 The sync bin is pretty amazing Not sure if it was mentioned but in the Edit page you can also change the multicam angle by holding Opt + pressing a number key to switch that angle where the playhead is parked on the timeline. Also, Opt + Click will change the angle.

[@JasonYadlovski]

Thanks! Great tip, thanks for sharing! Not sure if I had mentioned that or not. 😜

[@Xenovalence]

Very Helpful! quick question. Is there a way to show all of the footage at once like in the final edit?

[@JasonYadlovski]

Hi! You want to see all of the angles? I think you might have to make your cuts, then right click on the clip and choose 'Decompose in place'. it might break apart the anger, but I'm not sure.....

[@projectstudio2354]

This is a great video Jason! I am working with multi cams and trying to add in the different views. I ran into a problem and hope you can help. When I went to change from my multicam clip back to my timeline (14:40 on your video), my drop down arrow doesn't give me the option to change. Is there another way to change back to my timeline?

[@JasonYadlovski]

Hi! You should be able to just click on the timeline you want in the media pool, then open it in the timeline. Thanks for watching!

[@doubledark2]

brilliant stuff; turning into one of my favourite DR channels.

[@JasonYadlovski]

Wow thanks! Glad you are enjoying the content and learning something! There’s a bunch of great people sharing DR stuff on KZbin. 👍😁

[@nevaiddd]

I was so comfortable with Premiere Pro's Multicamera editing workflow and I'm glad that Resolve is almost similar (slightly better) to Premiere Pro. Thanks for such a detailed video tutorial.

[@JasonYadlovski]

You’re welcome! I agree, I find it works really well. 👍😁

[@nevaiddd]

I see you replying to almost everyone, would like to share my problem. I use a Dell XPS 15 9570, i7 16gb Ram, with gtx 1050 ti, and resolve couldn't playback my footages no matter what. I generally edit 1080p or 720p, normal fusion work and colour grading. Playback is very choppy. I tried everything, optimization and render cache. I wish resolve had Pre render feature and which everything could be played back.

[@JasonYadlovski]

I do my best to get back to everyone who leaves a comment. I appreciate the time people take to leave a question or comment. 😁 Sounds like you tried what I'd recommend. Just to list it again, here's what I'd try: - Create optimized media for all of your files. Consider using a smaller filetype for smaller optimized media files. - Playback menu - Render Cache - Smart - Playback menu - Proxy Mode - Use Half or Quarter, you may need to use Quarter - Go into project settings, master settings and under Optimized media and render cache - update the optimized media & render cache format, 'check on' all of the options below that. Go to the bottom of the window and check the 'retime process'. Set it to Nearest, Motion estimation to Standard Faster. These should help enough for playback to be smooth. If not, maybe your machine is just underpowered for all of the effects, fusion, colorgrading, etc. that you're trying to add in. Hope some of this helps! Best of Luck!

[@nevaiddd]

@@JasonYadlovski thanks for your support. Keeping making stuffs and helping us. 👍🏾👍🏾👍🏾

[@JasonYadlovski]

Will do!

[@JoshuaAfolabi]

Absolute blessing of a tutorial!

[@JasonYadlovski]

Glad it was helpful!

[@lizelleoberholzer1402]

Hi Jason, thank you so much. I have a problem though Agter I opened my Multicam track in the timeline and made adjustments, I cant close(26:23) it together as one track again like you did. I don't have that red Multicam bar that you close available on my screen? Can you please help?

[@JasonYadlovski]

You’re welcome! Check out the timeline view options where it will allow you to open and close timelines. I believe it’s the icon in the top left of the timeline viewer options. Or just select the timeline from your media pool that you want to open and double click it. That should open it up for you and close the multicamp timeline.

[@zoomoutin1000]

Thanks for your great videos. I try on multi cam to change the audio for a few seconds to the audio on the camera and then go back to the professional and good audio. I do not know how to do it?

[@JasonYadlovski]

Hi! Thanks for checking out my videos! You can do that by taking a look in the multi cam viewer, and several windows in your left hand viewer, and if you hovered towards the bottom of the fewer you’ll see that you can choose either just the video, just the audio or both to change when you select different angles. In your particular case it sounds like you want to change just the audio, you can do that. Another way you can do that is to just make the cuts in your multi cam where you wanna hear a different audio. Then in your timeline right click on your audio clip then change the angle to be the audio that you wish. Hope this helps!

[@zoomoutin1000]

@@JasonYadlovski I first did a camera cut to the angle I wanted. After that in the sound I did a standard CUT edit, not a multi cam cut- only in this way it worked. Then I changed the sound to the camera sound I wanted. Thank you very much Jason

[@JasonYadlovski]

Glad you figured out and got what you wanted, thanks for the reply!

[@KramerStephan]

Thank you so much, you have saved me a lot of time and nerves! Do you have any advice on how to insert or edit multiple transitions on a multi cam clip?

[@JasonYadlovski]

Hi! Thanks for watching! I’ve got a bunch of videos about adding multiple transitions on my channel. Here’s one you can start with, or or you can just go to my channel and search transitions. kzbin.info/www/bejne/kGbFo6R6q6icm7s

[@Shauny_D]

I've been digging for weeks and have stumped the davinci support team. I need to split multiple mono audio recordings in a multicam clip but also keep those synced to the original camera angle. So Cam 1 (even with audio clip tributes changed to 2 mono tracks) will be added to the multicam clip at adaptive and there is no way to split them to 2 independently controllable audio tracks that stay connected to Cam 1.

[@JasonYadlovski]

Without looking at your files and playing around with the project, my first thought is why not just throw your video clip and the two audio clips in their own timeline or their own compound clip. Then you retain both audio tracks in a mono format, you can go back and add them if you need to, and then your main timeline, you only have essentially one clip, which is either the timeline or compound clip, which ever you choose to use. You could probably even put that compound clip or timeline into a multicam clip in your main timeline

[@Shauny_D]

@@JasonYadlovski Yah that’s sort of what i ended up with. Dropping all 12 additional individual audio tracks on the timeline under one multicam video track. So i just have to cut audio along with each video cut. Painful with monthly hour long sessions. I’m multicam recording with Atem iso so i have all my live cuts in real time on cut page but that is a huge pain and still have the same audio issues not being able to split things out. If the atem iso would just give you a multicam clip instead of the weird sync bin crap it’d reduce my editing time from 20hours to probably 3 🙄

[@webslinger2011]

I experimented using two clips. Even without the clapping, it synced pretty well. Thanks!

[@JasonYadlovski]

Nice! I found it works really well now. I rarely have issues getting things synced up. Thanks for watching!

[@bizjakboris]

Hi. Is there an option to just use numbers for camera angles without seeing any of them at all (as i know how they look anyway)? This way I would only see cuts in one clip and it would make it easier for computer to play smoother. Thank you

[@JasonYadlovski]

Hi! Yes, you can use the numbers to change angles. I think I mentioned that in the video but I don’t remember, I made this quite a while back.

[@bizjakboris]

@@JasonYadlovski Thanks for quick reply. I know, you did say it. But the question is:" Can it be done without any angle being shown, so the gpu has less work to do? Many thanks again

[@JasonYadlovski]

I’m not sure but I don’t think so. Do you need to have the multi cam viewer up on the left viewer so that you can change angles. Unless you just make your cuts but then you have to manually change the angle I believe. I would recommend you try lowering the playback resolution to either half or quarter. That should help with your playback.

[@TominatorBelgium]

Very well explained, really good video! I have a question: I don't have several cameras, just one long recording of the same thing one after the other, so I've created an in-out, then dragged that video portion to my timeline, then scrubbed, new in-out, again drag&drop to another track etc. How could I create a multicam kind of thing out of these subclips (they have the same music playing each time)?

[@JasonYadlovski]

Hi! So since you have the clips you want in the timeline, you can actually just select each clip and drag it back into the media pool. This will make a new sub clip for you. Once you have both in the media pool, select both clips and right click, then choose 'create multicam clip'. Then you should have your multicam clip and you can work with it the way I show in the video. Let me know if you have any troubles. I'm happy to help more. 😁👍

[@TominatorBelgium]

It works! I just had to rename every drag&drop to "vid 1", "vid 2" and so on, because otherwise it won't add the duplicate (original) clip name, and then I could use every tip and trick in this video. Thanks a ton!

[@JasonYadlovski]

Nice! Glad you got it worked out! Thanks for the reply!

[@roundtailrestoration]

Great video. Informative and easy to follow. Thanx so much fit making it!

[@JasonYadlovski]

You’re welcome! Glad you found the video helpful, thanks so much for watching!

[@ralfmuller2728]

Awsome - thanks so much for that detailed tutorial!!

[@JasonYadlovski]

You're welcome! Thanks for watching!

[@who2999]

First time viewer, AWESOME TUTORIAL, really well done, very thorough, awesome you showed different methodologies. Sub to see what else you've done

[@JasonYadlovski]

Thanks! Welcome to the community! Thanks for the sub!

[@rahulkota3586]

Great Jason!!! You taught every possible way of Multicam Edit.

[@JasonYadlovski]

Thanks! I tried to get all the ways in there. It's good to have options. 😄 Thank you for watching! I appreciate it!

[@rahulkota3586]

@@JasonYadlovski Yah I was just thinking how someone can make a half an hour video on just multicam edit and when I was started to watch I felt it's worth.

[@JasonYadlovski]

I thought the same thing! It wasn’t suppose to be that long but when I got into it I thought people might have questions on how to do various things, etc. So I figured I’d put all the info I can in it along with troubleshooting questions I often get and add a nice little table of contents to jump to what you wanna know. 👍😁 hope other find it helpful too!