Murcielago V12 Carbon velocity stack noise - GT1 Lamborghini project

[@mrclown7469]

Every time you start the Lambo up I like to imagine that Starkey is in his office on the phone and is absolutely furious 😂

[@kirstysinclair9021]

You need to get you painter buddy to clear coat them so that the weave looks deeper and more drifty and that.

[@piotrekroszczyk]

Brush a bit of acetone on the 3D printed adapters and they will look mint! Great build guys!

[@David_Conant]

I’ve never said or thought this, but that’s almost too beautiful to drive. I hope you have a 1m pound insurance policy.

[@AndyQuinton]

"Street car" 🤣. Phil you're an absolute mad man, this thing is beyond wild.

[@Blaghhhhhhhhhhhh]

While you’re at all the building work have you thought about getting the two poster recessed into the floor a few inch? Would save a ton of stress getting all your cars on without the worry of wiping out a bumper or skirt.

[@ValladolidArde]

can't wait to see and hear this under full load blasting down a track or on the open "autobahn" road

[@LeddersD]

Absolutely fascinating episode and with the amount of work that's going in to it creating a car that will no doubt be a screen saver for every petrolhead. The DDE crew or any Murci owner will be losing their minds watching these videos #envious. I have the Gruppe M carbon intake on my S15, whilst not having the impact of your velocity stacks, it does look good looks good. Loving the channel, am a musician originally from Aberdeen and appreciate the great sounds musical and now from the LP1 headers back to the ear holes. Can't wait to see the car in person at a show or track.

[@Slarty_42]

God damn that thing sounds incredible 👍

[@vrfrys]

That sound man, goosebumps

[@asylumville8544]

Can wait to hear that engine under load.

[@mrmoss149]

Phil- as you well know- anything worth doing is worth doing right. Well done, lad.

[@chrisg4rr377]

A video on a Saturday?? Cheers Phil, you da man

[@driftworks]

It's Sunday 😂

[@chrisg4rr377]

@@driftworks ha yes it is. I'm all confused now

[@mikedowland9949]

I would love to hear this thing come flying past me full chat!😜👍

[@andypolo7928]

Please put a gopro or mic in the engine bay when you take it out for a drive so we can hear that nice induction noise at WOT

[@billywilliams8833]

A Real Raging Bull! Another Great Video Phil and Jay!

[@mk3whitewide]

I would constantly blip those trumpets too. Just to make sure the engine stays running haha. Nice job guys cheers!

[@barnabro]

Best week ever

[@SuperAlicat1979]

There will be car alarms going off all over Birmingham lol love it

[@Matty.Hill_87]

I've only ever seen one car that's done this and that was a ac cobra about 20 years ago.. Dude started it in a a massive car park, revved it and car alarms were going off everywhere 😂😂

[@driftworks]

It set the alarm off on my RS6 today 😂

[@SuperAlicat1979]

Lmfao you may get used to that Phil lol

[@mikestevens3695]

love this project, eye for details and wanting to get all perfect. jus love it. keep the goo d work up !

[@kylebrace9949]

Wow that all I have to say no words for how Beautiful that looks and I bet it’s going to sound even better

[@driftworks]

Cheers 👍

[@jamest5149]

The lamb starter has to be one of the best sounding starters... who knew that was a thing 🤷‍♂️

[@Matty.Hill_87]

Sounds better than my shit box car 😂😂

[@sjoroverpirat]

I find it a bit weird that a starter can sound good, a starter is a starter ey?

[@FirstLast-bi8xi]

@@sjoroverpirat most likely a gear reduction starter, you can get them for/use them on hi commpression engines.

[@matteightytwo]

You should hear a Porsche 928 😍

[@syygnis]

rotary starters sound sick too

[@thedownshiftchannel]

They look awesome. Maybe something to model up for S54?

[@yovanihernandez8797]

The only GT1 on KZbin insane build brother

[@Braveheart7914-idfl]

Phill / jay that just sounds demonic ! Even turning over is just plain Epic incredible work guys keep the videos coming it’s a true octane booooost !

[@zhu1921]

Sounds Absolutely Mental.. Beautiful Work So Far Guy's👍👍👍

[@zanerasmussen8889]

Phil, are we ever going to get some high quality posters to buy of this Merci?!

[@zachcannon9422]

You should get some ppf to protect this beast forever. So much work already into it

[@UnexplainedHoveringSpheroid]

Lovely, lovely stuff. It sounds incredible. Knowing how OCD Phil gets about each and every detail, I am wondering how long it will take for him to get wound up by the 2 visible marker pen lines on one of the trumpet tops, then take it back off for a wipedown :P

[@offcamber]

Beautiful craftsmanship. Beautiful sound.

[@upbuild4397]

That look so good on the move, even just moving it around in your garage haha! and not even on the proper wheels without the wing etc. Epic! 👍👍

[@anidiotinaracingcar]

Have you considered a plexiglass "bubble" airbox to showcase them while keeping them clean and dry?

[@driftworks]

I have.

[@anidiotinaracingcar]

@@driftworks 👌

[@liamcosgrave5410]

I can't wait for the onboard footage from a track day ! Because we all know its going to happen at some point

[@GAVINHURST]

That sounds incredible when that goes on the track that's gonna sound unbelievable 🔥🔥👍🏻👍🏻👍🏻

[@Matty.Hill_87]

The driftworks logo on the sleeves is a real nice touch

[@philrodrigues9270]

Phil I think your murcielago is one of the sickest. Lamborghini I've seen yet. Also sounds amazing. 🔥🔥🔥👍

[@mattmarshall747]

That sounds so good now 😍🔥

[@lopon12]

Looks badass without a wing 😍

[@jamest5149]

You can get chopped carbon fiber additive to add to epoxy glues, makes the joint much stronger and temperature stable if you have any issues with the trumpets coming loose in the future 👍

[@johnrowell942]

Sounds amazing 👏

[@buggerlugz6753]

wonder if there's any benefit to be had by polishing up the internal flutes of the velocity stacks and using some form of ceramic coating?

[@jacobarchambault1841]

Smooth texture doesn’t necessarily improve airflow

[@michaelsummerell8618]

The Murcielago is one of my favourite all time cars, so this is seriously "jizz your pants" territory! Those carbon vents on the front wings just look so damn mean! Looks and sounds awesome Phil - you jammy bugger!

[@ArryBradbury]

Absolute work of art - will you put some form of air filter over them?

[@SimplySteel]

Unless he plans to never use the car in the rain, he has to. Water will get right into those velocity stacks.

[@ArryBradbury]

@@SimplySteel Rain under a glass engine cover?

[@SimplySteel]

@@ArryBradbury Its a glass louver, not a sealed window. Here is a close up of the same style window on the Lamborghini Aventador www.eurocarnews.com/media/pictorials/1122/5063.jpg

[@driftworks]

I want to design an airbox when I get a moment (or a couple of months) They're fine for now.

[@ZHPBrent]

those stacks are 🔥 send me some for my s54 😎

[@jameshumphreys3147]

What are the shoes Phil is wearing, DC?

[@22Wook]

Loving the lathe work! Was wondering how you were going to tackle work-holding for the CF stacks, the nylon part looked like it worked really well.

[@cl9170]

What a build👍

[@r.p.3192]

Jeez what a beast!

[@jamest5149]

You guys so need a bigger facility including stores and workshop... make sure you take Dyno-torq along with you 👍

[@barrysheldrick2704]

Are you going to make an air filter system of or this or just run without? Love this build!

[@bradders3535]

Pretty sure Phil said in a previous episode he might do some sort of roof scoop in the future

[@HermanoMayor59]

Those diffusers. W

[@_chenn]

Confused why the guy who layed those trumpets up put a split line in the first ply. 45 degree orientation on 2x2 twill will drape perfectly fine along the length of those. Looks awesome either way though! Tight release film before bagging would of also eradicated the ‘wrinkles’ glad you sorted them though 👌🏼

[@TVtwarn]

When my next delivery arrives wednesday the packaging better be ‘essence of lambo exhaust’ scratch and sniff

[@MrMightyytau]

They look fantastic however Arildite is only good for 120 centigrade, not sure that was good choice.

[@krisby55]

The level of detail in so many parts of this build is mind blowing Phil, I hope you are going to exhibit this car at some car shows once the world is let out from its COVID jail 🤙

[@Killerpandahrr]

Dare I say. Is it to loud the coppers will be all over you? Amazing build

[@MrSaxophoneGamer]

Depends on the cop, most I've met get really interested when they see a cool/rare car. I had one lower a speeding ticket because he liked mine

[@omarl7002]

I hope you're going to track that thing. Put some clear film on it if you're worried about the paint

[@fxmixer]

I think the full extent of Phil's "particularness" is on display in this video! Haha.

[@ZSJamie]

Surprised you didn't get some titanium sleeves made up in true Phil Morrison style 😅

[@paulciccarelli1656]

Will you run these with a filter?

[@mrmoss149]

" Just eleven more to go". 😂😂😂

[@sp4604]

Oh Baby, She’s a Screamer!!!

[@djviper79]

Driftworks lambo, how time have changed from orange cable ties!

[@naufalaqil8720]

never been so early

[@EnthusiastGarageSA]

Phil can you make me a set of velocity stacks for my s50 bmw

[@driftworks]

I can't I'm afraid.

[@oldm8alfie]

How come you guys didn’t go with a rubber coupler and hose clamps or some other style clamp ? Like how a motorcycle engine has its intake held in place. Not criticising, I just feel like there will be heat related and vibration related problems with that 3D printed part.

[@driftworks]

It's a really precise adapter that allows the transition from metal to carbon to be seamless.

[@oldm8alfie]

@@driftworks ok thanks for the reply :)

[@hksp]

cool

[@FelixIsMyName]

Phil, is there any real world reason for having these in Carbon rather than stainless? Is it all aesthetics for the engine bay?

[@driftworks]

Why would you want them in stainless?

[@FelixIsMyName]

@@driftworks Wouldn't it be an easier material to work in?

[@driftworks]

No, it would start with 12 huge chunks of metal and a lot of machining. Stainless is a very difficult material to work with.

[@TAG247]

This is satisfying as fuck.

[@TheBobes]

The Lord had answered my prayers! 🙏

[@boldst6]

My god man

[@tedwhitehall2540]

epic

[@ianwallace5043]

Do your neighbours watch this ?? Bet their looking forward to that coming home.... :)

[@FirstLast-bi8xi]

*SHOUTS IN ITALIAN !

[@Ricky-cl5bu]

Some car I’d be scared to drive that car in a tight place

[@tuurbow]

Im not too optimistic those 3d printed sleeves survive with the heat and NVH created by that V12

[@rsl000]

I think the car would look much nicer without rear diffuser.

[@driftworks]

I still think it looks awkward. I have ideas.....

[@fussyfez]

Mhmmm more lambo content

[@spazda_mx5]

Press F for headphone users 👉😆👈

[@bowlerwildcatGaming1991]

Lamborghini i starts up now Other cars it's to loud get it out get out we trying to sleep

[@scottybhoy8375]

them 3 d printed sleves will crack or with the vibration of the engine get shook apart 3d printed stuff dont hold up well over time

[@UnexplainedHoveringSpheroid]

That is an innacurate generalisation. There are many different types of filament polymer. PLA and ABS are not the strongest (but still more than adequate for this job), but nylon 910 and polycarbonate are impressively strong and have a good heat tolerance too. Also, the sleeves appear to be a tight fit (hence the need to notch a cutout into them to make them fit the throttle bodies) and are held by a grub screw, so they shouldn't be overly affected by vibration.

[@driftworks]

As above, that's not accurate. There have been cases of 3d printed intakes failing. I have had full length 3d printed stacks in my E30 M3 S65 airbox for two years with no issues. Also these are sleeves. There's no part of the intake side that is 3d printed. The carbon touches the ITB. These just hold it together. Obviously I'm not guaranteeing that they'll hold, but I'm happy to find out.

[@scottybhoy8375]

@@driftworks I had a 3 d printed wheel hub for sim drifting and that fell apart but was probably made out of the cheap crap lol fell apart where the layers were layed on top of the last but you have had more experience with different kinds of this stuff so ill go with yah lol just worried when you said 3d printed.

[@ironmantooltime]

1st 😎 Notification squad 🚙

[@corky9127]

I am now deaf

[@bolf]

Spelling check squad , check the title Phil 😂

[@driftworks]

Doh.

[@3838jeje]

It’s just pornography 🥰

[@beardofben1718]

Automotive porn!

[@stonecoldmurphy]

The weave isn't the same on all ports, that would annoy me every time I looked at it

[@aidenyoung3115]

as an American i am greatly disappointed my friends overseas don't know that the way you get air into the car is not how you affect the air going out of the car it literally is going to sound the same unless you changed something mechanical in the carburetor for difference in combustion.

[@driftworks]

I'm not sure what you mean, but induction changes can create their own very special noise. I'm not talking about it adding extra exhaust noise.

[@prtheid]

Induction noise mate. Exhaust is only half of the party. Go listen to mclaren f1 interior shots the rowdy below you hear is induction from the throttle bodies.

[@JonasE-l7q]

@@prtheid kzbin.info/www/bejne/joikppSqbt2DfZI&ab_channel=Kamotors im just gonna leave this here

[@vinayaksethu5160]

He meant like fancy intakes doesn't matter in terms of sound like whether it's carbon fiber or steel as long it gets all the air in.

[@ricks_toys]

@@vinayaksethu5160 different materials and structures resonate at different frequencies. If you run rubber stacks on an itb car it muffles the intake noise compared to one running aluminium. Titanium exhaust has a different pitch to a stainless steel exhaust of the same design and length.