WHEN YOUR POP UP SPRINKLER HEADS DON'T POP UP!

[@Nello353]

Your landscaping is gorgeous.

[@peterdobol6662]

You are a genious!!!!! I have been f-ing with this problem for days. I just did your o ring trick and problem solved. There are a hundred videos out there on sprinkler heads and yours is the only one the worked. Thanks so much

[@GeorgeAmodei21]

Yes it works ...at same time attracks dirt:) Like the guy below, Your Landscape is Beautiful :)

[@bexaminer1]

Good idea. That's what I"m going to try tomorrow morning. Thanks.

[@angelitogarcia648]

Pretty cool! I loved the explanation. We do this commercial and industrial basis but never heard someone with so much patience. And I’ve never ever done the lubrication part. Wow 😯.

[@petekru9403]

Irregular Wear Pattern Sedimentary deposits have caused the inside ring to wear irregularly, creating a wear pattern on the tube which causes the ring head to jam. Dissolve the sediments on the head. Smooth off the tube with sandpaper finishing up with a 320 grit or better. And regrease for a frictionless release upon activation. Cheers

[@MyPIDream]

Thanks for the tip!

[@islandlife.1431]

HI James, another great video. I miss the videos about your yard, keep them coming.

[@radaraacf]

I’ve put red rubber brake grease in my pop up heads and it fixed 3/4 of the crappy units

[@chisexton5845]

I had the opposite issue - I changed a fixed head to variable but then it wouldn't pop back down flush on its own. Seems the same solution will work for me - so I'll try it! Thanks!

[@colingamble-beresford2387]

Easy fix hey James.No problems watering the weeds over here in the UK its been raining no stop for days!!

[@MyPIDream]

This has really been a dry rainy season here.

[@ludmilaioudinagarcia8838]

I love your dog , precious

[@sonjatheierl1]

Thanks! Your house is awesome!

[@monicacuellar8566]

Great idea, we will try it

[@j.mccarthy3008]

Informative so thanks. Not the problem I am having however. My 6” sprinklers are at the end of the line. I suspect low water pressure or the line could be nicked.

[@MyPIDream]

Low pressure can be caused by several things but if all your heads are good and one is low then chances are you have a block somewhere or maybe some debris is clogging your last head. Did you try replacing it?

[@samuelmartin707]

Great work James!!!!

[@fiouable]

Good tip. But yes. How long will the grease do the job before being diluted and flushed away by the water. Duh.

[@MyPIDream]

Yes, these types of heads do require attention from time to time but it's pretty easy to lubricate. Another solution is to buy additional head for a quick swap out when they become sticky. They're not that expensive.

[@mikemikie8312]

Well James ,where there's a will ,there is a way .Cool quick fix sure it will require greasing maybe two to three times pa because of the climate there .:)

[@teknotech]

Very nice video, thanks for your production and sharing. If you have calcium deposits that may be at the root of the problem, perhaps some 0000 steel wool and turtle wax would both remove the friction causing deposits, and apply a lubricating finish to the plastic rod. I came here because I have a brand new 4" Rain Bird sprinkler unit that won't pop up. You certainly have a beautiful landscape, kudos on all of your hard work!

[@gmcjetpilot]

They don't need grease. Just clean it or go buy a new one they are cheap. Sprinklers last 3-5 years depending on your use and weather. They should be checked and cleaned every year and keep DIRT and grass from sitting over them. YOURS are too far down below surface. You don't need them to be that low to avoid the lawnmower. I look mine just a but proud. Yes they are subject to being stepped on but I am not talking way above ground level. Trim grass short as well carefully.

[@bluev3nom]

I see your using Rachio. I use it as well. Wish there was some features on there.. like a test feature.. because when you are messing with sprinkler heads and go to stop, your fingers get wet and try to stop on your phone is impossible.. This is so true for Drip Systems especially. How did the grease hold up? I am about to go out this very second and replace a few heads. I thought of using Spa and Pool Lube on the head. I think it would last longer than what you did. But very curious to see how well it held up. Please let me know. Great Vid.

[@MyPIDream]

When I'm testing I set the Quick Run feature to 1 min. This way if my fingers are wet and I'm fumbling with the phone app it doesn't run long. The grease has to be reapplied from time to time on 3 of my pop ups. Those I showed in this video and one in the back yard. I never have issues with the rotary pop up.

[@bluev3nom]

@@MyPIDream Gotcha. I live in AZ. I just replace the whole unit. Can't take the risk with the yard for a few days or it dies here lol. I do the one minute test too.. but that is still far way too long with drips.. Ever had to replace a drip line while you are diagnosing what is going on? 20 seconds of water causes an hour of wait time. I wish i had seconds. 10 seconds would be perfect.

[@MyPIDream]

Lucky with the Rachio app you can just hit the pause or stop button after a few seconds of getting wet. As you've probably noticed, I'm always in short, flip-flops and a t-shirt so I don't mind getting a little wet. It's all good!

[@liannegregory7523]

Thank you!

[@flowtown69]

What control system are you using? Love the app you have for it.

[@MyPIDream]

Rachio

[@aussiebicolanalifestyle]

Tks for sharing

[@jesuscardenas2318]

Thanks for the video! Also he didn’t run cuz he knows that sprinkler isn’t popping up😂

[@alexthemtaandr211weatherfa2]

He was also squatting to n a disturbing way

[@Professional_ProCraftinator]

Could there be an issue with the installation level of your sprinkler valves? Don't they need to be at a certain level? Not sure if it needs to be above or below ground though with sprinklers at so many levels, like your yard) in order for pipes to have enough water pressure to pop up the sprinklers.

[@uswcboy]

Looks like the wiper needs replaced. If that is a rainbird pop up spray, you should be able to order the wiper only and replace just that component.

[@carloleal2868]

how did it work after the grease application and what type of grease did you use?

[@colleenrodamer6230]

Wow I never knew thanks now I know God Bless y’all

[@johncruz7895]

Way far and beyond the days of those long stroll from your small apartment to your under construction house. Miss those fun days. Good to see you going strong with more interesting vlogs.

[@MyPIDream]

Got to say I miss those days too. Lots of friends by the apartment.

[@teaguejelinek4038]

Cool trick. Maybe don't do this though if there is not a backflow preventer on the system. Could end up with grease (or whatever lubricant) in your house water.

[@MyPIDream]

This is not tied to our house but rather our underground cistern. Back flow preventers are highly recommended for safety of your house water. Good comment for those considering attaching an irrigation system to their water supply.

[@teaguejelinek4038]

@@MyPIDream oh I see haha sorry for my assumption. Great work 👍

[@komputel1]

Dzięki pozdrowienia z Polski . Thanks jest regards from Poland

[@donirey4201]

Maybe the retaining wall heat's from the sun causes grease to dry up faster. A shield could ease.

[@tdotbones]

This video was very helpful because I am experiencing the exact same problem! First I cleaned my 5 Hunter PGV 100G valves removing the solenoid on each, then cleaned the diaphragm etc. Ran it after same problem on 4 zones water just bubbling from the top of the heads so I will try this. What kind of grease did you use?

[@Susan70003]

Silicone

[@tdotbones]

@@Susan70003 I believe he said heavy grease in the video not silicone.

[@MyPIDream]

I used some grease for my hammer drill but I also tried non-conductive grease for landscape lighting connectors and that worked better.

[@galdessa1]

I have noticed you have the lawn growing right up against the walls of your house. Is there a reason for this. In Europe we normally have a 30 cm gap between the house and lawn filled with pebbles, good for drainage, or tiles.

[@MyPIDream]

No reason. I normally reserve this area for flowers or shrubs. I can transplant the grass to other locations later when I decide to dig it up and plant something different. I've been donating the grass to my neighbors. Since I have French pipes under this area no need for pebbles for drainage.

[@MrRodrigo630]

How long did the grease work?

[@obbie1osias467]

It looks like the shaft expanded. Make sure your water pressure is not over the pressure limit of the sprinkler heads.

[@korychavez2809]

Use Petroleum Jelly instead of using grease. Petroleum Jelly will both repel water and lubricate the shaft

[@fu-linghitt57]

Great suggestion. Has anyone tried using petroleum jelly?

[@plee87]

Thanks for the video! If my sprinklers aren’t popping up with my irrigation system but they are (better but not completely) when i manually open the valve via solenoid, what do you think the issue could be?

[@MyPIDream]

Sounds like low water pressure to me. Your pump should be pushing around 65psi for multiple heads. Normal irrigation pressure is 40-80psi.

[@bumtracksNew]

I just grab popups like that and pull them up - then step on it while its squirting and work it up and down a few times with my foot.Yeah, you get wet, wear flip flops, and a divers watch :).

[@s4f4m78]

How long did it last? I notice some of my heads retreating into the soil, so I'm going to add 2" risers to those, but the others are sputtering like yours. I've thought of using grease but wondered if it wont get washed away. However, my 4" sprinklers this year have been terrible - a lot of sputtering. I have hard water, and this maybe an annual/biannual thing for me to do now - go around each zone and lubricate the shafts. Please let us know if it lasted a season or a couple months.

[@MyPIDream]

The grease will get washed away and you'll have to reapply from time to time. Hard water is really bad for your irrigations. You should insert a water softener filter cartridge between your supply and irrigation heads. I have 2 filters, sediment and softener.

[@420]

Tried this trick with plumbers grease on a bunch of heads and it did nothing. I think my next step is replacing a few of them. It's seems as if I can only get them to pop up if I manually hold one or two up manually and have my wife turn the problem zone on. By me holding one up, it seems to jumpstart and allow the rest in the zone to popup. Idk what the deal is.

[@MyPIDream]

I think replacement is one of the easiest options after a while. At least these pop ups aren't expensive but for me hard to get as I have to order from the US. Not readily available in hardware stores here.

[@Nuevo80]

That is my problem with my sprinklers I will try it . Thanks

[@michaelfirestone7440]

MR. FIX IT. IT'S GREAT WHEN YOUR PROJECT GOES RIGHT THE FIRST TIME.

[@Hungryman97sCollectibles]

5:38 that's what she said

[@saudiarabiariyadh5474]

I like your working borther

[@MyPIDream]

Thanks!

[@wheniseeacat8701]

Hey Sir, stay safe and God bless.

[@yhenloder5311]

Very Weird Question: Does WD40 also work? I am asking because that is literally the only thing I have that can lubricate the sprinkler head.

[@MyPIDream]

I wouldn't think so as it will probably allow too much water to leak out around the pop up. Also it doesn't have the adhesion power of thicker lubricants.

[@yhenloder5311]

@@MyPIDream OK, thanks for that insight!

[@spiveydurango8391]

WD 40 means water displacement

[@ricksanchez9232]

Too short, wanted to see what else is happening around villa Felis .

[@MyPIDream]

Thanks! More updates to follow.

[@bjf5151]

Not enough water pressure that is wht not coming up..pressure very weak

[@carloleal2868]

I mean how long did it work mabuhay

[@MyPIDream]

Since I published this video I think I've had to re-lubricate it 2 or 3 more times but it's still working properly.

[@Susan70003]

How far down is your drop off?

[@MyPIDream]

About 1.5 meters...if it's the retaining wall you are speaking of.

[@Susan70003]

@@MyPIDream Yes. Your doggy was so close to the edge I just wondered. Glad he didn't go over the edge! Great courtyard.

[@troutaholic8834]

I spray my toilet valves with a light silicone lubricant and I get triple the use out of a toilet valve. The companies want you to just buy a new one, so natural they don’t recommend it.

[@taxpayerzombie]

This is a great tip, but be careful about the choice of lubricant. Lubricants based on silicone, perfluorinated PFAE, mineral oils, and synthetic hydrocarbons (SHC or PAO), typically work well with plastics. Lubricants made from esters and polyglycols are not suitable for most plastics. Mixing additives with plastic materials can also lead to an unplanned reaction between the lubricant and plastic.

[@MyPIDream]

Good info. Thanks for sharing!

[@pjack2533]

Magandang gabi James and Necie. Stay safe.

[@codybakerousucks3926]

Just a quick note. I prefer not to use that type of rain bird sprinklers. Infact I would recommend using Hunter sprinklers because I think they are better quality and built better

[@MyPIDream]

Most of our system here is Hunter. I'm extremely happy with them. Next time back in the US I think I'll look for a Hunter replacement for the Rain Bird pop ups.

[@codybakerousucks3926]

@@MyPIDream if you do look into Hunter. Get the Hunter Pro spray with Hunter MP Rotators or Hunter PGP Ultra or Hunters I-20. Those things are amazing and they water well here in Texas where I live

[@seeyah156]

If there is a will there is a way. Great idea.

[@pwilkinson18]

Jeez 6 1/2 minutes to tell me to try grease on the shaft!

[@TexasRanchu]

you have a cat..:) he's able to stand on a ledge and not fall down

[@interestedin3766]

Did i miss the Air Quality Monitor

[@MyPIDream]

Air Quality Sensor is reported on my Ambient Weather web page. If you look up "Villa Feliz" on ambientweather.com you should be able to monitor the air quality here. We live around rural farm land so when the wind gusts blow there's a lot of sediment in the air that shows poor air quality.

[@interestedin3766]

@@MyPIDream Thanks James... I'll check it out. i have been doing research on both weather and air quality monitors. I'm not sure on which gases I want to monitor. We do have a station in town we can monitor, 5 air miles away in Kalamazoo, MI. But there's a airport, farmland and factories between us and the monitor. I do run two Winix 5500-2 air purifiers in the house... noticeable difference in the quality of air in the house. WOW, I am old! That was long winded... Hope you and ur family r well...

[@hondahaney6404]

Replace the head..15 minutes work

[@ngocvan5252]

cute old handyman...

[@sethpotter9592]

Replace the unit.

[@kurt357357]

Why didn't you just pull the head up with your fingers then grease the shaft? Then you wouldn't have to go through the trouble of screwing off the top to grease the shaft.

[@AdamPark-m1r]

Thumps up@

[@SuperFishbreeder]

Temporary fix rubber is no good and need to be replaced cheaper to buy a new head they are $3

[@gregfortuno1640]

2 lang flag sa ph flag james. dapat 3

[@paradoxdea]

If you looked it up on Google, why are we watching your channel?

[@ObeyMorsa]

Did you miss thenpart where he said "theres alot of things on google" so this is more of a trouble shoot video

[@marinaamoroso-levato765]

I can't hardly watch this with your dog on the ledge.