KitchenAid Mixer Loose Pin Fix

Here I show you the very quick and easy fix to that loose pin.
Here is a video if the pin falls out. • KitchenAid Mixer Pin F...
Amazon Links:
KitchenAid Mixer: www.amazon.com...
KitchenAid KITCH K45SSOB Mixer 4.5, 250watts, Onyx Black www.amazon.com...
Kitchenaid Mixer Paddle,4.5-5 Quart Flex Edge Beater www.amazon.com...
Metal Food Grinder Attachment for KitchenAid Stand Mixers www.amazon.com...
KitchenAid 3-Piece Roller & Cutter Set Pasta Roller&Cutter www.amazon.com...
Slicer/Shredder Attachments for KitchenAid Stand Mixers www.amazon.com...
KitchenAid Fresh Prep Slicer/Shredder Attachment, White www.amazon.com...

[@jacurry82]

Brilliant! This will relieve a lot of holiday stress for my wife.

[@AroundTheHome1]

Glad you found it helpful. You're a good husband.

[@nylascotia6894]

This was awesome and in less than 30 seconds my mixer is perfect again, thank-you for this!!!

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@ellagoutos7000]

Thank you so much for this quick and helpful video! My mixer was extremely loose, looked over at the side and the pin was out completely! I thought it was broken. Fixed it in 2 mins thanks to you!

[@AroundTheHome1]

You are very welcome

[@kimmyb3400]

That pin was almost all the way out and I had no idea why. Fixed it in a snap! Thank you!

[@AroundTheHome1]

You're welcome!!

[@laurieb5562]

You saved me in the middle of my late night Christmas baking! Many thanks for your great explanation and help!!!😊

[@AroundTheHome1]

You are so welcome! 🤗

[@laurieb5562]

@@AroundTheHome1 🙏🏻🙏🏻😄

[@heatherkiehlmeier3714]

Thanks for this video....saved me in the middle of xmas baking. My mixer is over 30 years old and this was the first problem ever. I was struggling to get the pin back in and went to utube for help...thanks to you fixed in a matter of minutes!

[@AroundTheHome1]

You are so welcome! Merry Christmas!

[@LMI101]

I thought I had a major issue when my pin popped out entirely and had been procrastinating calling kitchen aid… thank you for saving me so much time and trouble! Good as new!!

[@AroundTheHome1]

You are so welcome!

[@dinamicco853]

Thanks for the tip, the pin has completely come out so I'll try to re insert it now that you've demonstrated the underneath part of the mixer. Cheers!

[@AroundTheHome1]

Here is my video on when the pin falls out. Has some good tips kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@catalinaolmos6432]

Thanks so much. I thought of buying a new one and this video saved me heaps of money.

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@andrewfinnegan7539]

Life saver. I tried the more common “stopper screw” fix and it helped a little but the thing was still really wobbly. This fixed it 100%. Thank you from Ireland.

[@AroundTheHome1]

So glad to help! Thank you for watching from Ireland. Check out hundreds more of our videos at www.aroundthehome.org

[@moorejazznow]

Thanks my daughter, the baker, has been tapping it back in with a hammer. She tightened the screw and all is well. Thanks again

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@annalee8200]

You're amazing! Your instructions are so clear n easy to follow! Thank you very much! From Singapore 😊

[@AroundTheHome1]

Thanks so much 😊

[@michaelsnyir4353]

Thank you! We thought we needed a new mixer, then we found your video.

[@AroundTheHome1]

Glad I could help!

[@LawrenceUpton-u6y]

Thanks, really worried when I saw the rod half falling out but this simple fix solved it. One slight change is that my screw requires an Allen key rather than a flat head screwdriver.

[@AroundTheHome1]

Glad to help. Also thanks for the input that some are Allen! 👍😎

[@HarbourGulf]

Thank you, thank you. I had struggled to get the pin back in until I watched this

[@AroundTheHome1]

So glad to help!

[@michelmeijs6005]

I have that problem to and always put it back. Thanks you have solved the problem. Greets from the Netherlands.

[@AroundTheHome1]

Thanks for watching in the Netherlands! 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@squirrelgirl2906]

omg... all the years I've been just shoving the pin back in and I could have just fixed it in seconds?!?! doing this as soon as I get home today!

[@AroundTheHome1]

Don't beat yourself up over this. I did the same thing for like 2 years. We don't use it all the time so I just pushed it back in until finally I was like there has to be a better way. 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Taylorbell1479]

Omg thank you!! Thought I needed a new machine!! You rock!

[@AroundTheHome1]

Glad I could help!

[@louisebenson4275]

Thanks so much. The manual does not have this information. Yesterday I fixed my loose motor issue. Today I can tighten this pin. My mixer is about 30 yo. Can’t imagine a kitchen without one. 😀

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@megatronmax14]

Saved me from lots of aggravation. Thanks a million!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Cabsorx]

WAUUUW! Way simpler fix compared to the amount of time I've been wondering what to do. Thanks!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@GMNestorPL]

Great video, short and to the point, helped me in an instant. Thank you!

[@AroundTheHome1]

You're welcome!

[@josephinenguyen6055]

Thank you. I was looking for this in months ! The issue of mine is from day one.

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@janicefranklin6011]

Thank you I thot I'd have to find someone to fix my 21 year old mixer. You showed me how and I fixed it myself. 😊

[@AroundTheHome1]

Glad I could help! 🤗👍

[@prudencethe1]

Thank you so much for this. My pin came all the way out and I couldn't figure out how to get it back in lol.

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@pr3046]

After breaking my head how to fix this loose pin, your solution is so simple and yet so effective. Just turn the whole thing upside down :-) A big thank you from the other side of the Atlantic for sharing this information.

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@carmeloferlisi3231]

You just saved me $700. Thank you!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Utuberaq]

Thanks! Your video save me a trip to the dealer to have my beautiful Artisan Mixer fixed!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@daphibc]

Thank you so much. Just fixed our mixer. And to think i was so worried about this

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@asliekici9617]

Omg why i didn’t think this before 😂Thank you so much.❤❤❤❤❤❤

[@AroundTheHome1]

No problem 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@ibrahimmahmood1550]

Thank you brother!

[@AroundTheHome1]

You are very welcome.

[@wendynordstrom3487]

Awesome! Thank you! You just saved me from spending $$ getting this fixed!❤❤

[@AroundTheHome1]

Glad I could help!

[@giaannguyen9315]

I can put the loose pen back. Help please. Thanks

[@AroundTheHome1]

@giaannguyen9315 first just so you know it is very hard to find a comment on an old thread. If you want KZbinrs to see your comment easily, start a new comment thread. Ok, I am assuming that you are saying that you can not put the pin back, here is my video when the pin fell out all the way. kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@Jomoscho]

Thank you! The pin was almost all the way out. I knew it wasn’t the height fix all the other videos said.

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@pkarowic]

Thanks for the issue with the pin sliding out of the neck of the stand mixer. Mine almost came all the way out while kneading bread. I tighten the screw and all is good again. Thanks.

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@SeeMooreVids]

Man. You helped me with this aggravating wobble. Thanks.

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@d4lep0ro]

Thank you for this video. Fixed my artisan!.

[@AroundTheHome1]

Fantastic! 🤗👍

[@joemallik8528]

You made my day! Thanks for sharing.

[@AroundTheHome1]

You are very welcome.

[@user-cw6ni3xq5d]

Thank you! I think part of my issue is that it appears I lost a screw right at the back bottom of the head (if you're looking at the pivot pin, just above and closer to the back of the machine). Do you know what screw I can buy to replace this with?

[@AroundTheHome1]

I am not 100% sure which screw that you are describing, but here is a website that has most of the parts for your mixer. www.ereplacementparts.com/ Good luck getting it fixed.

[@erweniati]

Thanks for the video! Really helped me with the pin poking out. However it was not easy to wiggle and push back like yours. I had to hammer it down a little bit. Can you tell me what is wrong with mine and how to fix it? Thanks again!

[@AroundTheHome1]

Maybe your screw was just slightly loose and needed to be loosened a little more to let the pin slide in easier.

[@annaacevedo269]

Thank you for your help! it worked for me.

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@jennyruiz1485]

awesome vid! short, sweet & helpful, thanks!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@ingakovalerova9913]

Thank you so much !!!! What a useful video my mixer is as good as new now THANK YOU

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@vivian1074]

Thank you.. I badly needed this kind of info to fix my kitchenaid..

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Gxhamplin]

Exactly the info I was looking for! Thanks much!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@jeanninecookehernandez7779]

Thank you for explaining how to fix the pin. Should I use this same method when dealing with a pin that is 3/4 of the way out? I tried pushing it back in by hand but it’s not lined up properly.. it’s not going in.🌿

[@AroundTheHome1]

Jeannine, I know if that pin gets out far, it's hard to get back in. You might even need to loosen the screw underneath a little to help you. Now, of course don't loosen it too much. I would suggest just like one full turn. Then place the motor on your counter upside down. Let your counter do all the heavy lifting for that motor. It should help you enough to get all the holes to line up to push the pin back in then. Let me know if you get this back together right. Good luck.

[@catico68]

Thank very much!!!! From Costa Rica, central America

[@AroundTheHome1]

Thanks for the shout out from Costa Rica! So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@kathynassa9974]

What if you don’t have that screw underneath. It looks to me that I have a black screw that may need an Allen wrench. What color is the screw supposed to be? My mixer is 1 1/2 years old

[@AroundTheHome1]

It is normally black, but I don't know if there could be a different screw. Here is my video on that. kzbin.info/www/bejne/bGfGd6CBhtWapJYsi=vgUBFlPoIbDBVljc

[@susanagoldschmied5258]

Thank you so much! Super easy fix!!!❤❤

[@AroundTheHome1]

You are very welcome. 🤗

[@rozeerustic5477]

Ive been holding the mixer up because it was rattling and jumping around while i was making bread. Pretty didficult to do when your kneeding bread for 5-10 minutes. Hubby is going to fix my mixer for me.

[@AroundTheHome1]

I hope he fixes it quickly so you can get back to baking!

[@johneagen]

THANK YOU! Super easy fix!!!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@sharonbradley7833]

Thank you so much! Mixer perfect again!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@GinGin2255]

Thanks for your help but my screw is stripped and won't hold in the hinge pin anymore. I've searched the web looking for a replacement screw and no luck. Any suggestions where to get this little screw replaced and what the heck is it called?

[@AroundTheHome1]

Yes I do. Here is my video on that. kzbin.info/www/bejne/bGfGd6CBhtWapJY And here is an Amazon link for that. www.amazon.com/dp/B014W8Y3WG?psc=1&linkCode=ll1&tag=greatwhitenin-20&linkId=b59091b97e90c97e95addc14c2f9c757&language=en_US&ref_=as_li_ss_tl

[@abbymu916]

I thought only me have this problem., Thanks 🙏😊

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@pinkythechihuahua3156]

Thank you so much! Now I won't wonder if I broke my machine. Wondering, could frequent use be making my mixer to this?

[@AroundTheHome1]

A lot of use can loosen it, but to be honest I remember ours doing it from almost the beginning. I don't think they are tightened down well to start. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@somethingcosy6281]

Thanks it helped us!! Thanks from italy

[@AroundTheHome1]

Glad it was helpful! Thanks for the shout out from Italy ! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@jfbreese]

So glad I found this! Thank you!!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Nurmi1000]

Oh wow. Thanks for the help👍👍👍

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Sherrytshepherd]

The pin on my stand mixer has come out completely. Can you tell me how to replace the pin? Thanks.

[@AroundTheHome1]

Sure, here is my video on that. kzbin.info/www/bejne/n6SUfYWIdsuVZqM A my video on replacing the feet. kzbin.info/www/bejne/aWTTfHSHmN93atE

[@michellemelo2339]

Love this ! Saved me a lot of time!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@doroteoarango9508]

Thanks a lot

[@AroundTheHome1]

Most welcome

[@yvonnefalconer3018]

Hi there, great video. Can you help. The pin on my mixer has completely come out and I can’t get it back in. Can you help please. Thanks.

[@AroundTheHome1]

I'll do the best that I can. I have taken the pin all the way out to check to see if it was notched for the screw. It was not, by the way, but I do have experience putting it back in. I am assuming that you are really just having trouble lining up the holes in the mixer head and the mixer stand. With the head being so much heavier then the stand, you need a strong hand to hold it still. So I would suggest to get someone to help you hold it steady so the two can line up. I think that's really all that I can do from here. If you get it all the way in on one side, so that it is in for both the stand and the head and it gets stuck at the halfway then you might loosen the screw in this video just a hair. I am not suggesting to start with that because you might unscrew it all the way and it would fall out. Then you would have to deal with that too. If the pin fell all the way out, then the screw should be loose enough already anyways. Hopefully that helps.

[@yvonnefalconer3018]

Hi there, thank you so much - it helped turning it upside down and loosening the screw and then tightening it up.

[@AroundTheHome1]

Glad to hear that you got it back together. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@malcolmtaylor6407]

Does the pin have a hole in which the setscrew goes into or is the setscrew simply pushing up against the pin shaft?

[@AroundTheHome1]

You know, I double checked this one. Popped the pin all the way out. No slot of flat spot, just a round pin. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@becketdrive]

Thank you!

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@buahkerian9658]

Thanks a bunch - quick simple and to the point. 👍👍

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@doroteoarango9508]

Does anybody know what for is a horizontal bolt (5/32", aprox) on right side?

[@bakerssecret2164]

Any idea how to fix the pin that has totally come out ?

[@AroundTheHome1]

Does it not slide back in?

[@becketdrive]

Mine did, too. I turned it over and positioned it so the arm was tilted all the way back before I could get the pin to line up correctly. I unscrewed the screw up a little bit just in case that would block it, but I'm not sure if that's totally necessary.

[@funrepair8824]

So simple! Thank you!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@r4nd0mstuf]

Amazing, it worked for me! Thanks!

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Foodnetworkbysaimaajmal]

My mixer beating stick runs with pauses .is there any easy fix.plz ans

[@AroundTheHome1]

There could be a couple of things wrong with it, but unfortunately probably not an easy fix. Nothing I could explain without seeing it in person.

[@fuzzy_wuzzzy]

thank you!!!!!!!!!!!!

[@AroundTheHome1]

You're welcome!

[@nadimsiddiqui1875]

Thanks!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@aviben2821]

Thanks friend

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@wubiwubi8467]

Thank you!!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@TheSquirrelMommy]

Sooo awesome! THANK YOU SO MUCH!!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@cavolpert]

What size is the screw? We lost ours

[@AroundTheHome1]

I think this is mine. www.ereplacementparts.com/screw-set-p-622311.html You will need to put your model number in and find yours.

[@anumshahid7264]

Is there a discription of the size of the screw... i just checked mine... the screw is missing

[@AroundTheHome1]

Try this site for the replacement. www.partswarehouse.com/default.asp

[@joeKisonue]

Thank you very much. Ad Lock-tite

[@AroundTheHome1]

You're welcome! And that's not a bad idea.

[@keallie14]

Very helpful, thanks!

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@christinah3880]

Thank you, it works!

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@rhatzvi]

Useful. thanks

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@qamarnawazish237]

Thank u

[@AroundTheHome1]

You are very welcome.

[@keishasutherland717]

My pin came all the way out. Would this method work to put it back in?

[@AroundTheHome1]

Yes it will. Actually I knocked my pin all the way out just 2 days ago because someone asked if there was a notch in it. I didn't think so, but I wanted to be sure before I said so. You will have to wiggle the head and base a little so the pin will go back in, but after that tighten up that screw and you should be good to go. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@keishasutherland717]

Ok thank you! I'll try it and let you know if I got through.

[@AroundTheHome1]

Good luck.

[@keishasutherland717]

I just try doing it and it worked. I got the whole pin back in. I used a knife because I didn't have that kind of screwdriver. Thank you so much❤😊

[@AroundTheHome1]

That's awesome!

[@noldaker]

Pin came out and won't go back in...Goes part of the way in and stops...Seems like it's too big or something is preventing it from sliding back in. Thank you for posting this video :)

[@AroundTheHome1]

It may be the set screw that I show in this video. The pin is not notched out or anything, it is just round. So you may need to loosen the set screw just a little before the pin will go back in. Unless you are just having trouble getting it through the second side. I would put the mixer upside down so that the heave motor head is on a counter top. Then you can move the much lighter base around to get all the holes to line up. Hopefully that helps.

[@noldaker]

@@AroundTheHome1 Thank you...Hubs who is very mechanical came home and fixed it in less than 5 minutes. I had him watch your video and he knew exactly what to do. :)

[@AroundTheHome1]

Awesome, glad to help.

[@noldaker]

@@AroundTheHome1 Indeed - Thank you. :)

[@Jerry091864]

The pin is literally larger than the hole through which it passes on the motor (top) part of the mixer. It makes no sense, but it's true. The way I fixed this was to put the pin in the freezer overnight and heat up the hole in the top part, and use a hammer to shove it through. It's not fun, but it works.

[@Bitbri]

My pin has come out completely and I can't get it back in. Any suggestions?

[@AroundTheHome1]

Yes, I have had some people ask that. I might need to make a video addressing that as well. I suggest to loosen the screw up just a little more, being careful not to unscrew it all the way. Then lay it completely upside down on the counter so that the heavy head weight is being supported. That way you should be able to get the base aligned well enough to get the pin back in. Good luck.

[@MarceyCashen]

The pin came all the way out and now can’t get it aligned to go all the way back in. Help!!

[@AroundTheHome1]

Here is my video on that. kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@judykarp1712]

This is the problem with my mixer! It works fine, it's just the bolt. Mine is not a tilt head. Any suggestions? 😒

[@AroundTheHome1]

@Judy Karp I'm afraid that I am not familiar with the non-tilt head. If you like you can hit me up on my website on the contact page. Then after that you could send a pic of the mixer so I could see what you are talking about. www.aroundthehome.org

[@judykarp1712]

@@AroundTheHome1 thank you. I will do that.

[@judykarp1712]

@@AroundTheHome1 can't find your website.

[@AroundTheHome1]

I put the link in my reply. Here let me do it again. www.aroundthehome.org/

[@judykarp1712]

@@AroundTheHome1 thank you so much!

[@AnnD2023]

This didn’t fix it for me. The pin in mine is perfectly tight, so it doesn’t seem to be the problem. When I adjust the screw, that determines the depth of the paddle attachments, it’ll tighten the lock a little bit, but then my paddle attachments don’t fit properly. It’s almost like I need to replace the whole piece that the lock mechanism grabs onto?

[@AroundTheHome1]

You have the wrong screw then. The screw that I am talking about does not adjust the depth, just holds onto the pin.

[@barbarabehrmann7468]

My pin came all the way out. Is there a fix for it ?

[@AroundTheHome1]

Yes, stick it back in. Ok, seriously though. Lay the head of the unit on the counter and roll it so it is upside down. The head is very heavy so you need to let the counter do all the holding of it. Then you can maneuver the base into place and line up the holes. You may need to loosen the screw a little, but really just a little. We don't want that to fall out too. Just one turn to the left should do it. Maybe even just a half a turn. You may need to wiggle the base a little as you try to insert the pin, but it will go back in just fine. Good luck. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@CmiriamH7]

Thank you!! I thought it was broken lol

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@riklemes1]

Nice!!!

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@lizapest8518]

To quote the great Bette Midler "Did you ever know that you're my hero? "

[@AroundTheHome1]

So glad to help.

[@jonathanelechicon6204]

The pin came all the way out. I tried pushing it back in but it won’t line up. I tried wiggling it as I move the head but it still won’t line up.

[@jonathanelechicon6204]

Disregard...I got it back in.

[@AroundTheHome1]

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@barbarastewart6988]

I tried that and it is still wobbly. Why ?

[@andrewfinnegan7539]

Try adjusting the stopper screw. You’ll find it by unlocking the mixer head and tilt all the way back. Inside the hinge, you’ll see a large flat-head screw. (Don’t be tempted to screw it all the way in, it’s job is to adjust the mixer head forward and back). Adjust the screw and keep testing the closed mixer head until the head sits parallel to your table and doesn’t wobble. You may need to loosen it for the desired result.

[@Jasmine-lg3bz]

how to contact u?

[@AroundTheHome1]

What do you need?

[@heismightytosave527]

My pin was almost all the way out and won’t go back in 😵‍💫

[@AroundTheHome1]

Did you get it back in? Here is my video for when it falls all the way out. kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@shatequacox3418]

I'm not seeing a screw in my kitchen aid

[@AroundTheHome1]

This video takes it a step further. Might help out more. kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@marilynmonroe3511]

My pin came completely out

[@AroundTheHome1]

Got a video for that too. kzbin.info/www/bejne/n6SUfYWIdsuVZqM

[@apanloco]

Thanks! You are right -- I do indeed feel silly I've been pushing this pin in for a year+.

[@AroundTheHome1]

You and me both! 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@Jewishimmah]

Very helpful, thank you very much for your help

[@AroundTheHome1]

So welcome!!

[@venombite23]

Thank you!

[@AroundTheHome1]

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org