Onboard Elevator Troubleshooting, Stuck in one floor

Here is the troubleshooting video I did in fixing our onboard elevator. #elevator #seafarer #seaman #leckyjake

[@ms21048]

Hats off for all ETOs,most challenging job

[@russ1669]

Thanks Jake. I'm shoreside Electrician in UK. I find your videos fascinating and educational. Thank you for your work. Hopefully one day we can meet

[@MattyEngland]

Thanks for the video Jake. You have a very interesting job. So many different electronic systems that you need to work on.

[@ramilbarro2742]

Thank you for the very imformative content marami akong natutunan. Ito yong pangarap kung trabahu simula nong una kaso hanggang ngayon andito pa rin ako sa telecom industry at nawalan ng pagasa na makasampa pa sa daming attemp na nangyari nag undergo pa ng training kaso hindi pa rin pinalad. Kaya maraming salamat na kahit wala ako mismo sa barko dami ko nang natutunan dahil sayo.

[@paulgirard3093]

Great content, thanks

[@roger6557]

His gone bro. 😢

[@dhaniel1339]

Thank you for sharing your idea sir ETO leckyjake....Have safe and smooth sailing sir...GOD BLESS YOU Sir!!!

[@rashidchibvuri2036]

Keep on the good work sir

[@fatihh7180]

Thank you so much for this instructive video. Can you make a video about galley hot plate and how to connect it? Take care of yourself.

[@cecilledeguzman2393]

May youtube pala din kayo boss.kaka subscribe ko lang now sa inyo.salamat sa tulong nyo pag upload sa fb.regarding aircon split type inverter..❤

[@safaksahin8002]

Thank you

[@seanandreidelena6343]

Good Evening sir. pano po ba makakuha ng ETO/ETR? kung meron pobang trainings or training center? salamat po God Bless 😇😇

[@lintonthomas9826]

Sometimes a thin flim of oxide builds up on relay terminal, so when u shake the second relay the third relay blink

[@gregdekkers2667]

Is this the 'Maersk Salalah"? I used to be a cadet there 10 years ago!

[@adriandejesus143]

Sir good day! Hope all is well on your side, maiba po ako, tanong ko lang po sir kung anu ba automation system natin sa barko? HMI (human machine interface po ba?) o scada (supervisory control and data acquisition) po ba? Salamat po

[@jeynishjayaraj9416]

Can u upload videp about valve remote control

[@nicolasgoubin]

That elevator again ? 😅

[@YouTubeviolatesmy1stamendment]

That's what I was thinking too I mean I know it's important and they have to have it working if they have one equipped but that thing seems to go out every other month

[@etosined9373]

These elevators pissed off a lot of ETO's🤣

[@rb1m426]

Alright lods

[@Techie1224]

not an expert but maybe that relay contact points was sticking or its legs are oxidized or something

[@aphaseelec]

Thats what i was thinking. For the cost of the relay i would just change anyway.

[@JoyceAndJerryVlog]

Sir good day ano po kaya problema ng elevator . kapag yung elevator Minsan Ayaw mag close door biglang mag arrived sound tapos nag oopen yung door . palaging naiistock sa Pinaka taas na floor

[@yasinshaik7489]

how much eyesight do you have ...? do they allow glasses on ship

[@msekhar6829]

Brother y u r asking personal question . U please focus on video not on him..

[@6Diego1Diego9]

have you ever been trapped inside the elevator when you were new to this job?

[@Krambo19]

Looks like It could have been a door lock issue not a relay issue

[@berkaykaya6078]

where is the new video

[@roger6557]

His gone bro😢

[@kj3854]

WE LEARNED THAT YOU AND YOUR COMPANY ARE UNSAFE

[@lintonthomas9826]

How come that elevator don't have a PLC in it???

[@unmountablebootvolume]

Because it has its own proprietary controller in it, probably with 10 million safety certificates, just because it is an elevator intended for moving people. if it were built for moving animals, steel parts or bulldozers, it would have a normal PLC, but because it moves humans, it needs to have special home brew control board that is certified for elevators moving humans and can not be reprogrammed to do anything unsafe, like ignoring a faulty safety switch or running the elevator twice as fast.

[@zainahmedmalik6759]

​@@unmountablebootvolume 😂

[@lintonthomas9826]

@unmountable boot volume ok i understand

[@kj3854]

PLEASE PAY ATTENTION FELLOW VIEWERS!!!!!! THIS IS VERY UNSAFE AND INCORRECT PROCEDURES!!!!! BECAUSE PEOPLE HAVE TO RIDE ON THIS ELEVATOR!

[@kj3854]

LETS BE CLEAR THE ONBOARD ELECTRCIAN OR ELECTRONICS TECHNICIAN SHOULD NEVER BE WORKING ON THE ELEVATOR!!!!! THEY SHOULD ONLY SERVICE THE ELEVATOR!!!! WHY? BECAUSE THIS SHOULD ONLY BE SERVICED BY THE MANUFACTURER

[@kj3854]

VERY WRONG NO GOOD SUPERVISOR!! THIS GUY SHOULD NEVER BE WORKING ON THIS ELEVATOR! THIS COMPANY IS TAKING A RISK ESPECIALLY IF SOMEONE GETS HURT

[@RS_83]

what was the reason of the malfunction?