This is an introduction to the new TX-NR616 , showing graphics interface and the Setup menu of the unit
Пікірлер: 35
@tatupapu16 ай бұрын
I know it's an old video but still helped. Can't wait to get this as my first home theater av receiver. Got it used for about 20€, just gotta fix the DTS-chip.
@Quercus_Maximus12 жыл бұрын
Great. Setup is always hard to read. This is a good overview of what is really important.
@OnkyoEU11 жыл бұрын
Hi and many thanks for your feedback. Regarding the home menu - can you check whether it will be shown in the receivers front display? Regarding ARC: You must select TV/CD input selector and your TV must be ARC capable. The ARC indicator will light when the audio signal is detected. In the setup, "HDMI Control(RIHD)" must be set to ON, "Audio Return Channel" setting must be enabled - and the Audio Selector should be set to ARC. Please also see manual pages En-62 and En-65/66.
@OnkyoEU11 жыл бұрын
Please apologize the delay. We did some tests in our customer care department trying to reproduce the problem, but did not experience this behaviour. Nethertheless there can be issues in HDMI communication/handshaking between different HDMI devices. According to our experiences, also the cables can make quite a difference. Could you try a different cable between AVR and TV (different manufacturer)?
@OnkyoEU11 жыл бұрын
Hi, the TX-NR616 should not be a problem here, as it will accept and decode the suggested A/V signals above. The main question will be how you can convince your laptop to output the compressed streams via HDMI...
@DragoshCryMay11 жыл бұрын
Hi, there I am again. When I turn of the onkyo 616 it's still getting hot. I have to disconnect it from the plug everytime I want to stop it. What can I do?
@OnkyoEU11 жыл бұрын
Hi, we're afraid we cannot recommend any specific 3rd party brands or products. As long as the source outputs a compatible HDMI A/V stream, there should not be any problem. But maybe other users can provide feedback about the above mentioned products...?
@ScooterMcGraw2 жыл бұрын
7.4 Network is greyed out on my options list. Anyone know why? BTW, it's really interesting you showing what you can choose in the set up options, but is there an explanation of what does what anywhere to refer to? Many thanks
@ictus67 Жыл бұрын
My TX-NR616 have no sound it all, what can I do?
@UglyKidMetallica8111 жыл бұрын
Thank you, this was very helpful :)
@bobbybhuiyan90972 жыл бұрын
Hi, thanks for sharing your video. I m having issues setting up my Onkyo. Would it be possible to organise some paid help?
@mbrenden100011 жыл бұрын
Thanks for the reply. I have already tried three different cabels, so I don't think thats the problem. It works fine after using different hdmi sources. But not after NET apps. If I choose external speakers on the tv, everything seems normal, but there is no sound. And the arc symbol does not apear on the display. Unplug/replug the power of the AVR, and everything works fine.. I have also tried to remove the network cable, and use the wifi adapter (UWF-1) but still have the same problem..
@mbrenden100011 жыл бұрын
I have this problem too. The ARC dosn't work after I have been using the NET applications. The only fix is to plug the power out/inn. And then the ARC works fine again.. Any ideas?
@mbrenden100011 жыл бұрын
I tested a little bit more. When I use the net apps. if I chose the HDMI1(AVR) on the tv the AVR returns to TV/CD input, and the ARC is activated :) And then chooce antenna input on the tv. Problem solved.. I would still think it should be enough to just choose TV/CD. But it is not a big problem :)
@thebackche10 жыл бұрын
hola buen dia tengo el onkyo tx-nr616 y bocinas frontales jbl es80 y bocina central jble es25c ayudeme para poder aprovechar al maximo el rendimiento del receiver sin perder la calidad de sonido ya que en tanto menu ya no se donde ajustarlo gracias
@jellybeanjellybean-tn2lm4 жыл бұрын
I want to set it up on my tv screen. How to do it? What cables do i need and connections??
@rostedtjr11 жыл бұрын
Hello there. Just bought a 616 to make my other speaker synergize. But i can't get my Audiopro addon T8 to work with the system. Any ideas?
@johncarey2644 жыл бұрын
hi I need some help with set up with my onkyo amp with the out puts iv tv and projector conneted it will not let me have both outputs connected at same time
@robertoruiz40034 жыл бұрын
I need bass! And volume for the record player I haves hooked up. Please tell me how to achieve this.
@DragoshCryMay11 жыл бұрын
Hi, what can I do for listening to Dolby True HD, DTS HD, or at least DTS by connecting my laptop to the receiver onkyo 616 by hdmi 1.3?
@B.Ruslan19786 ай бұрын
2:30 I'm only doing manual setup.
@Ritchie682 жыл бұрын
Co.o programo el receptor se ne bloqueo Ya lo resetee a valores de fabrica Pregunta es por av La programación del menú Por hdmi solo tengo el ligo de onkio Gracias mi onkyio es TX-NR616
@DragoshCryMay11 жыл бұрын
Would be a possible solution to buy an Asus O!PLAY MINI and connect it to the onkyo and play the streams via usb. It says that has Dolby True HD 7.1... Can you confirm that will work?
@SodaWithoutSparkles4 жыл бұрын
Hi, new here. Regarding the speaker settings, I seem to have a grey out the icon and can't select that. Currently, I have a 3.1 setup and ran the full configuration of Audyssey. Anyone could help?
@milankala67768 жыл бұрын
Trouble shoot for no sound? Unit is on but no sound?
@OnkyoEU8 жыл бұрын
+milan kala Hi, could you check if this applies to you: www.eu.onkyo.com/en/customer-service-program-118747.html
@hugosalomaodemoraes72509 жыл бұрын
Hi, how can I config my receiver for a 7.2 ? Using two subwoofers.
@OnkyoEU9 жыл бұрын
Hi, just connect them to the "pre-out" rca/cinch terminals on the rear (active subwoofers required - passive subs will not work) - as described on page En-14 "Using Powered Subwoofers". Please be aware that the same signal will be used to both subwoofers, as it is a parallel subwoofer output. To get be best bass quality, it is always worth trying different room positions for the two subwoofer...
@izehumaheyiba21823 жыл бұрын
@@OnkyoEU accept 2 things 1st Digital Optical Audio cable and 2nd Digital optical Audio cable
@thedavid9810008 жыл бұрын
Hello! the equalizer settings inside the reciver, do you know the stock settings for it? I played around a little with it and now I cant get it to sound good again. very thankful if you could answer this! :)
@OnkyoEU8 жыл бұрын
Hi, to reset the EQ settings to factory defaults, please follow these steps (attention: the whole AVR will be reset to factory defaults - any settings changed by you will need to be configured again): 1. While holding down CBL/SAT on the main unit (note that step 2 must be performed with this button pressed down) 2. Press ON/STANDBY on the main unit ("Clear" appears on the display and the unit returns to standby).
@DragoshCryMay11 жыл бұрын
Maybe this one works better: Asus BDS-700
@OnkyoEU11 жыл бұрын
Hi, could you get in touch with our customercare via customercare_eu(at)eu.onkyo.com to verify that your AVR is ok (just in case)? Thank you!
@OnkyoEU11 жыл бұрын
Hi, please get in touch with our colleagues at customercare_eu@eu.onkyo.com to get in to details here. Many thanks!