Detailed video showing steps it takes to install any type of handle bars on all Indian Scouts.
Пікірлер: 50
@jasonguetgemann270119 күн бұрын
Great video. Thanks for the awesome tip on the fine grit cream for any stripped bolt heads!
@neilbrewer38862 жыл бұрын
I got my bars the other day from Aftermarket but haven't done the install. Great Video!
@johnnylettuce7538 Жыл бұрын
Great video! Thanks for making me confident enough to go through this mod by myself.
@AB-pc8no2 жыл бұрын
Thanks for the video! Great guide and explanations along the way.
@elisecopeland8327 Жыл бұрын
Hey dude!! I needed to come and add a comment, I followed your video and was totally able to do my handlebar swap out yesterday all by myself! I was waiting weeks to install them because every video I had seen showed everyone really struggling to get the grip off the throttle body, and as a small woman, I was super nervous to get into this project and then run into a step where I just didnt have the strength to complete it. Your trick about sliding the bar out of the throttle tube worked great and gave me the confidence to just go for it!! Also loved your tips about just immediately putting the screws back into the control modules as they dangled to keep everything together and tidy. Thank you so much for the detailed video! I try and do most of the work on my bikes on my own, but some projects I feel out of my depth, I'm glad this wasnt one of them!
@oxouk Жыл бұрын
Hi Elise, I’m very grateful for your kind words and happy you were able to complete your install by yourself. Never sell yourself short on your capabilities. Being patient and having the right tools is sometimes all you need.
@markmarkyyy56325 ай бұрын
You are a GENIUS! Your customizations are UNREAL! So glad I subscribed to your channel. My bike also thanks you!
@Justmil692 жыл бұрын
Men I love your content god bless you brother
@oxouk2 жыл бұрын
Thank you. That means a lot.
@TheStringBreaker2 жыл бұрын
Man your channel is underrated af! You deserve way more subs!
@oxouk2 жыл бұрын
Thank you!
@gerardpeyssi359311 ай бұрын
Many thanks for this video. Very useful, as usual 😉
@alexniazy20902 жыл бұрын
Great work 👌
@markmarkyyy56325 ай бұрын
Kinda leery about ordering those drag bars from Indianaftermarket; seeing that it was threaded wrong and the angle of the bars were so much straighter than your previous bars.
@KillaFitz86 Жыл бұрын
Like ur mirrors I seen a pair of rectangle joker machines bar end mirrors u might like
@toddjones4447 ай бұрын
Nice Job
@ScarlettEmeraldASMR Жыл бұрын
Just subscribed...replied to your comment on the Sean video
@oxouk Жыл бұрын
Awesome! Thank you Scarlett. I have a couple of drum videos on my channel. Sean was a huge influence growing up.
@andrewpapineau49382 жыл бұрын
Hey, love your videos. I got a question about having a 16inch wheel in the front, and the 18inch in the back. Have you noticed any handling issues?
@oxouk2 жыл бұрын
None whatsoever as the overall height is still the same.
@cezartanase9562 Жыл бұрын
🤗🤗🤗🤗🙏
@mariomartinez-iu2lt2 жыл бұрын
Hi oxouk I got a indian scout bobber abs 2019 I buy already my bars and my cuestión is the mesure for the pin hole you tech in the video is the same for my motorcycle
@oxouk2 жыл бұрын
Hi Mario. Any measurements should be the same for all scouts 2017-2023.
@DavidRodriguez-zb1pp Жыл бұрын
What mirrors do you have?
@thedieseltech86392 жыл бұрын
Thank you for video Can please know me link to buy these bar
@oxouk2 жыл бұрын
Indianaftermarket.com
@StreetPilots2 жыл бұрын
Great video as always amigo! If I may add a suggestion, You should do a brake bleed procedure video next, because there’s going to be someone who moves the banjo too much potentially getting air in the system. I also use nipples in my video as the terminology as you have seen, I believe they are called “detents” but nipple is the more common word. Speaking of nipples, the new bar didn’t seem to have ones on the tips where the bar ends mount, what were those for on the previous bar? Also, when I had removed my stock bars (to replace my upper tree clamp), for those who are worried, I used a paint marker to mark the positioning of the bar to the speedometer clamp, so I could return it to its original location. Lastly, if you have insta, DM me amigo, I’m interested in procuring the wrong pitch bars from you!
@oxouk2 жыл бұрын
When I spoke to the guy that makes the bars, he said the small extension at the bar ends were not needed as they were originally intended to stop the mirrors from rotating. If you remove your mirrors you’ll see a recessed section on the inside spacer. He said even with that there, they still rotate anyway, so he removed them. Once I receive the new bars I have to return the others which he will re tap the ends then sell again. Thanks for the feedback also. It’s always welcome.
@StreetPilots2 жыл бұрын
@@oxouk ahh, damn. Thought I may get lucky. What was the pitch anyway? Hopefully the new bars are bent to a better position than the wrong pitch ones! Do you have Instagram?
@oxouk2 жыл бұрын
@@StreetPilots Marcus said he drills them all 8 mm. The ones he sent was too small. Couldn’t even get the screw started. Other than KZbin, I don’t do social media.
@StreetPilots2 жыл бұрын
@@oxouk damn! Wish we could have a good way to communicate. Just for purposes of a collaboration or perhaps during the season. Do a meet and greet for guys with Indians on a 240mm tire 😂
@oxouk2 жыл бұрын
@@StreetPilots Yeah, I wish there were more like minded riders here. Would be nice to do a group ride and bounce ideas back and fourth.
@KillaFitz86 Жыл бұрын
Hi I have a 2022 scout bobber with 200 miles on it and the check engine light came on at stop light I’m not sure how to check codes but everything seems fine and earlier I put gas in it so might be a fuel censor but what do u think thanks
@oxouk Жыл бұрын
First thing you should do is take it to the dealership you bought it from. Put it on a trailer if possible or ride it if it seems to be performing normal. They’ll scan it to find out for sure. Check engine lights can be a multitude of things. If it flashes that usually is not good.
@KillaFitz86 Жыл бұрын
Thanks I will do that 1st thing Monday
@A_sadh2 Жыл бұрын
Hey man! Where did you get your license plate bracket under your seat???
@oxouk Жыл бұрын
It was an L shaped electrical junction plate I bought at Lowes. Basically any thin sheet metal with a 90 degree bend will work. I just had to drill a couple holes to accommodate the holes to mount to the seat bracket. If I find the exact part at Lowes I’ll post it to this comment.
@A_sadh2 Жыл бұрын
@@oxouk Awesome! I will try to look for it..thanks
@oxouk Жыл бұрын
@@A_sadh2 I was at Lowes today. the part I used for the license plate frame was item # 2504882 model # C23R1. The brand is nVent Caddy. It's called an electrical box bracket to stud. Hope this helps.
@newukshooter29322 жыл бұрын
awesome bike, is that a fellow Englishman I hear buried in that accent
@oxouk2 жыл бұрын
Good ear. Ipswich. Been here 34 years.
@newukshooter29322 жыл бұрын
@@oxouk ha nice, im south london, wonder if the americans hear your accent
@oxouk2 жыл бұрын
@@newukshooter2932 Only the ones that are well traveled ever notice. My user name is a hint also OXO (cubes) UK.
@newukshooter29322 жыл бұрын
@@oxouk ha nice one, i missed the username clue!! nice hint to the greatest stock cubes on the planet! safe riding mate
@oxouk2 жыл бұрын
@@newukshooter2932 likewise. Cheers!
@tgsturgis3 күн бұрын
You still on here?
@oxouk3 күн бұрын
@@tgsturgis I no longer have the bike but am still active on the channel answering questions.
@goodboyringo9716 Жыл бұрын
Needing to have a hole in the bars to aline the clutch lever and module is sorry. Very first bike I ever seen that is set up needing a hole in the bars. This hole limits the angle of the lever once drilled. In my opinion Indian should design parts that clamp tighter so this hole isn't needed. I like the bike's look but after watching some video , seem to me that Indian has made this bike a little cheaply