Pentair Whisperflo Pump Seal Replacement: How to replace a Pentair Whisperflo Pool Pump Shaft Seal

How to replace a Pentair Whisperflo Pool pump seal. Step by step demo on everything it takes to replace whisperflo pump seal or shaft seal. Pool elementary also go over replacing all other seals and gaskets with easy to find part numbers. Lets save some money and do it yourself! Lets get this Leaky Pentair Whisperflo Pump Seal replaced!
PRODUCTS AND PARTS SEEN IN VIDEO!
PUMP SEALS:
Pentair Ceramic seal part# 070134S
Pentair Mechanical seal for saltwater part# 071732S
U.S. Seal PS-1000 amzn.to/3oaXZ5V
FULL WHISPERFLO SEAL,GASKET AND O-RING REBUILD KIT amzn.to/3s4ua8i
SEAL PLATE GASKET:
Almond color seal plate gasket part# 357102Z amzn.to/3HsSJT7
Black Color seal plate gasket part# 357100Z amzn.to/34j39Wu
DIFUSER O-RING part# 355227Z amzn.to/3u9h24m
Rubber washer for impeller screw part# 075713

[@DiamondBarrelHorses]

Thank you for the guidance. I successfully fixed the leaking.

[@Poolelementary]

Good work Karol and thanks for watching!

[@mguerramd]

I lube the drain plug plug threads and o rings liberally with waterproof grease like Magic Lube

[@bpetty6573]

Very good video. Much more complete with commentary than the Pentair video. A very important step is the silicon sealant. If you don't follow this step, it will leak and you will have to repeat the process. Also, the blond gasket is for pre 2.1.2008 pumps (which is what I have). The black one will not fit correctly.

[@Poolelementary]

Thanks for the great comment and information on the gasket years and colors. Great information for the viewers!

[@Oakydokes]

Thanks for the detailed video; it helped a lot.

[@Poolelementary]

Your welcome Oakydokes and thanks for watching!

[@darinsmith9468]

I've rebuilt my Whisperflo a few times. Put some kind of anti-seize (like white lithium grease) on those bolt threads before you re-assemble. Trust me, I didn't do that once and ruined my seal plate the next time I had to disassemble the pump. Also, the torque spec is 70 in-lb for the motor to seal plate, and 110 in-lb for the seal-plate to volute--not 110 for all of them.

[@Poolelementary]

Thanks Darin for the tips and clarification. We're always up for learning something new here at pool elementary. Again thanks for the heads up to all our viewers.

[@dianawojtylko6241]

I like video

[@Poolelementary]

Thanks for watching

[@leninharellano]

Lenin Arellano Great Video, I was able to do it all myself. What if it was still leaking when I was done? :( I don't want to buy another pump. What about a stronger seal? More Forgiving? Thanks.

[@spasofmontana379]

👍

[@joegarza3445]

@POOL ELEMENTARY, I FOLLOWED THE INSTRUCTIONS, BUT WHEN I INSTALLED THE PUMP BACK, THE MOTOR RUNS, BUT, THERE IS NO SUCTION ? I TALKED WITH AGUY WHO JUST OPENED A SHOP IN MY NEIGHBORHOOD, BUT I THINK MIGHT HAVE GIVEN ME THE WRONG IMPELLER, AFTER HE SAID MINE WAS MESSED UP FROM THE GLUE HE SAID THE FACTORY PUT ON THE IMPELLER SEAL, HE SAID IT WAS MY MOTOR, SO HE SOLD ME A MOTOR FOR $375, HE SAID IT WAS A WHISPERFLO, BUT WHEN I GOT IT HOME I REALIZED THAT IT WASN’T A WHISPERFLO, I KEEP CATCHING HIM IN LIES, SO IM TAKING BACK THE PUMP HE SOLD ME, NOT ONLY DO I THI G THIS NEW PUMP IS CHEAP, BUT ALSO IT’S GOING TO BE LOWDER, I DON’T WANT A LOWDER MOTOR, I WANT TO FIX MINE. DO YOU HAVE ANY IDEA WHY MY WHISPERFLO PUMP WONT PRIM. PLEASE HELP, THANK YOU.

[@kylekendall410]

what the heck is a kitty corner// sounds like a strip club

[@ststephenernesto]

Katty Corner