Pro Tips For A Seamless Pentair Intelliflo3 (011075) Pump Installation

Welcome to the ultimate guide for installing the Pentair Intelliflo3 Pool Pump (011075) with Danny from AquaPoolSupply.com. In this detailed walkthrough, we'll provide expert tips and a step-by-step process to ensure a seamless and efficient installation experience for your pool.
The pump is available for purchase on AquaPoolSupply.com
🚀 Why Choose The Pentair Intelliflo3? Discover the power of the latest innovation from Pentair - the Intelliflo3 Pool Pump (011075). Engineered for optimum performance and energy efficiency, this pump takes your pool experience to new heights. With advanced technology and intelligent design, Pentair Intelliflo3 ensures a quiet, powerful, and cost-effective pool circulation.
🔧 Key Steps Covered:
Understanding Pentair Technology
Essential Tools for Installation
Troubleshooting Tips for Common Issues
Maximizing Efficiency with Intelliflo3 Features
🏊‍♂️ Dive into the world of hassle-free pool pump installation, explore the capabilities of Pentair Intelliflo3, and elevate your pool experience today!
🌟 Pentair Intelliflo3 Highlights:
Energy-Efficient Operation
Whisper-Quiet Performance
Intelligent Variable Speed
Seamless Integration with Pool Systems
Connects to Wifi, able to be controlled with Pentair app
Explore the future of pool pump technology with Pentair Intelliflo3 (011075) and transform your pool into a haven of relaxation and efficiency.
--
✅Don't forget to subscribe, like, and share for more informative how-to videos like this, product un-boxings, and more!
🛍️Follow, shop, and support our family-owned business at AquaPoolSupply.com .
📲Stay connected for the latest updates and exclusive offers.
Instagram: @AquaPoolSupplyUSA
Facebook: @AquaPoolSupplyUSA
Tik Tok: @AquaPoolSupplyUSA
🏊‍♂️💧 #PentairPoolPump #Intelliflo3Installation #PoolMaintenance #DIYPool #PoolTech #HomeImprovement #PoolUpgrade #PumpInstallation #PoolEnthusiast #EasyPoolCare #Pentair #RuleThePool#AquaPoolSupply #AquaPoolSupplyUSA

[@jeanreneau7454]

Thank you for such a great demonstration. You did an awesome job.

[@jperello001]

Need at least 5x pipe diameter run before entering this pump. This will void that 3 year warranty. The instructions are in the manual

[@gregcarper]

I didn't realize you could use DWV (Drain, Waste, Vent) PVC pipes on a high pressure pool pumps, is that lower connection a drain? DWV is limited to 5 PSI, I guess you got the dual marked DWV & Pressure kind that complies with ATSM/ D2665 / D1785 Pressure. Also just curious why you didn't add Sweep 90 degree Ells to gain some water flow efficiency? I am doing this same project right now and adding the sweeping 90 degrees to gain some flow efficiency. I ended up getting Waterway 411-9130 90 degree Elbows 2"S X 2"S Slip, I also got a Ryobi 2 inch 18 volt, PVC cutter, which made fast cuts and super smooth with no need for deburring, made the job so much easier. I think that pump generates 65 GPM in 2 inch config, which will be awesome! Some great tradecraft tips. I would have never thought to cut off the intake pipes and lower them. Nice job!

[@victorjimenez1726]

Does this pump work with in floor cleaning systems?

[@mikedaflame8483]

Nice install and great demonstration on how to make the pump even with the pipes. In addition when needed on some occasions. I use a reed tool to take the pipe out of the couple connected to the two way check valve if I don’t have enough length. But you definitely went above and beyond for this install.

[@AquaPoolSupplyUSA]

Thank you so much! 👍

[@Kfox1977]

If I want to hook up my salt system to the 5A max side, can I jump wires from main L1 and L2 over to the 5A L1 and L2 for supply? I have an Intelliflo now and they are both on my 220 gfci breaker in the sub panel, just the salt system goes into a manual timer prior to the salt power supply box. It seems this would make sense to keep both salt system and pump on the same breaker, just wired in the pump area now. Then out to salt supply box.

[@user-ut1wh7tn6w]

Thx for the tips!

[@AquaPoolSupplyUSA]

Happy to help!

[@mikedaflame8483]

So if you are powering a salt system how would it change?

[@JuanSanchez-tk4vr]

Attach bonding wire, not grounding wire.

[@jorgelopezcanales4347]

Saludos ! debiste haber cambiado los cables viejos , si cambiaste la bomba nueva !

[@mr.breadNwater]

I just had my Intelliflo3 installed yesterday and technician made the same mistake as you. Per Pentair, inlet requires MINIMUM 5X the diameter of the plumbing (so 10") of straight pipe without fittings or bends or you VOID the warranty. I just off the phone with Pentair and they confirmed this.

[@SDG-cv4br]

Probably true in an ideal situation, but this video was clearly about a retrofit….