RB25 Teardown: DISASTER WAITING TO HAPPEN

[@aboveaverageautos4447]

Yo what is up with the BMW

[@00-CN7]

Above Average Autos everyone like this so Adam makes a video

[@2012davidguetta]

yes

[@eliascardoza9202]

It's at psi getting worked on

[@morganmorlatt4870]

How long is it going to be there to

[@P1Mitchell]

Watch his last livestream and he talks about it

[@KalvinMalli]

Rb's super cheap??? Where where

[@ohgzone]

was scoutin the comment section for yours lmao

[@5lcalais1]

Australia. hahahaha sorry had to be done lol average 25 over here is anywhere from 500$ for a rebuilder to 1500 for good runners, or just buy a wrecked r33 for 2k and gut it for the driveline, 26s still a fair bit though usually around 5k for a runner, or a rb30e usually 100-500 for atmo one runners good base for a build (many around pumping well over 1000hp with the sohc head) some people put rb 20 25 26 heads on em also lol don't even bother with a rb30et you won't find em or their insanely expensive if u do only major differance is oil squirters in the head which u don't really need these days with modern tuning and all. if u wanna see how how hard we get rbs going just search Australias fastest rbs or vl commodores which are our locally produced car that came with rb30e and rb30et from 1986-1988 we got 1000s of the damn things hahaha.

[@randyssupra3230]

5lcalais1 cheap here in NZ aswell

[@exiledone8945]

New Zealand perhaps...

[@spookymanji9280]

i picked up a 300kw rb30det r33 coupe for 2 grand in new zealand, theyre piss cheap here jzs are usually more expensive than some of the cars they come in lol.

[@MayhemInc]

RB with cracked ringlands, what's new!

[@Antolioparker]

YEAHOOHOOO SHE'S NASTY

[@Antolioparker]

thats some bad schematics

[@rblifestyle9964]

RFB

[@gusmodelmaker]

still have to open my CA18DET (which is roughly a RB minus 2 cylinders lol), but I think I will encounter same problem too, it smoked blue on decel but had even (lowish just in spec) comps...

[@PiezPiedPy]

Check No2 bearing too, they always fail

[@PlaydohDookie]

How are RB unreliable? Can Americans only work with LS motors or something?

[@zyoungson215]

@@jackwatson543 ​ Americans build some of the best engines out there, rbs are just shit.

[@Zonda1996]

People run ultra lean tunes, don’t bother doing compression/leakdown tests before running extra boost on a 30 year old unopened engine, shock load the factory oil pump daily and expect the engine to cope. RBs aren’t trash. They just aren’t new. Motive DVD made an unopened 26 last 6 years at 700+ whp and considerable race useage.

[@stewarthorsley3405]

I have spare rb25 intake tomei Poncam I can send you if you want then you just need exhaust Cam! Let me know I’ll send from Australia

[@paddynewell7444]

Stewart Horsley I got a vdj79 factory turbo cruiser I’ll send ya

[@NCFREEMAN]

Really enjoyed the talking big boost piston!!!!!!! Roberto is a funny dude. It's refreshing to have a light hearted and funny person around to make things more fun!!!

[@wild6496]

U guys put oil on top of the piston last video!

[@djarodupont2086]

Just what I was thinking... They ranted about compressing more air because the combustion chamber gets smaller if you put oil in there...

[@eliascardoza9202]

Wil D I was thinking that

[@whytebobu]

We have an RB25 in an s13 with just headstuds, headgasket, 850cc injectors, LS Coils, Holset HY35 turbo, Apexi FC D jetro, runs on 115 fuel. Made 370 at 14psi and is now at 20psi. Conservative tune- not a ton of timing, Beat the hell out of it for the past 4 years no issues. Runs a big dual pass rad, stock oil cooler/ heat exchanger, 10an catchcan setup, Replaced the oil pump a few times as maintenance. Rbs can totally be reliable.

[@avvedavve4046]

You should put a Minecraft 87jz triple turbo with a double cheeseburger

[@johnc6466]

Avvedavve with fries.

[@avvedavve4046]

realAdolfHitler to yeah ofcourse

[@Honja999]

Avvedavve that's 1,000,000HP

[@willy_p_m]

O..... K......

[@meffycodrin1853]

and 2 numba' 9s

[@noxxonbeat1193]

Awesome to see you with an RB, in true Nissan style. It's also awesome that Alberto is back assisting.

[@byGiNeSiToX]

Sr problems... Mean Rb

[@jaxsoncronan71]

byGiNeSiToX Bananas I am trying to reach a goal of hitting 100 subscribers by July 1st and I was hoping you would sub to me

[@Maen1x]

Diesel Dude 71 I’ll sub to you

[@Maen1x]

But I won’t watch your vids

[@justingriffith8486]

Is they rb26. In yet. They good in it wat is the hp to it. Can you till my they will be good of you do they

[@rileymiler2067]

Diesel Dude 71 subbed

[@samson_BNR32]

holy shit. they sold you a jalopy

[@papidong2977]

Everyone needs a friend like Alberto

[@Invitingsauce]

Yes finally. Properly built RB 25/26’s will be awesome. Build it right like the stroker JZ going into the s-15 and it will be glorious.

[@DonPablo2011]

*Whispers* Here we see the Wild Berry Boost in his natural habitat the Adam LZ garage. Today it is working on a new device rather than the stuff it is use too. See the contentment on the Berry Boost's face as it finds what is wrong with the new device it has to play with. We're going to leave him to his contentment.

[@kylekicker5226]

Don Pablo 😂😂😂😂😂😂😂😂

[@matthewmcgurk6965]

Wild berry boost is an energy drink where I'm at

[@SamAdvenMedia]

Shout out to all horrible previous owners!

[@sean3717]

Sammy's 240sx Adventures! Lmao all car guys experienced this

[@SamAdvenMedia]

Sean Lim unfortunately! I spent nearly 5k just restoring my 240 to run before i got into actual mods lol

[@gregh7457]

previous drift car in japan?

[@BRMPHOTOS]

Sammy's 240sx Adventures! Lol

[@SamAdvenMedia]

GAMING Ultramotive subscribe to my channel! Lol just a bunch of road trips with my 240sx

[@420sx5]

RB= Reliabilty Butcher

[@IlahhNZL]

420sx RB = Run Bearings

[@BryanGarcia-qb2ov]

Do I know you from car throttle?

[@lordperezident]

420sx RB=really bad

[@lakaiskates8064]

Weren't you the guy telling him to get an RB in every video? lol

[@420sx5]

Lakaiskates never

[@Troplord]

2:00 Vice grips are the best. Used to use them for my bike. And I like the new nostalgic RB approach. Cheers

[@t1mmy13]

Hmm, maybe get a cage while you fix up the engine?

[@shona5512]

Tim He doesn't need a cage anymore, it's no longer a requirement for OSW to have cages for tandems.

[@ThierryTheuns]

It's a requirement for not getting your skull bashed in in a heavy crash.

[@cheitoh12]

Nothing crazy just someting to make the body tap more rigid

[@shona5512]

ThierryTheuns Most of the drifting Adam will do in the R32 will most likely be on an open skid pad, relatively low speeds and large run offs, it's low risk for "getting your skull bashed in in an accident". That's why it's not a requirement at OSW. Most other tracks on the other hand, have rules against drifting without a cage due to the fact that they're typically higher speeds, higher impacts and higher risk. If Adam is going to a track, I'm sure he'll take his S13 or another car that is caged. The 32 is just a practice car, I doubt it'll go much further than OSW.

[@riley.6r]

When Alberto was talking to mr.piston. He had me dead!

[@Nehstea]

adam got finessed

[@xiiNFiiNiiTY]

Skylines crashing into skylines is still better than mustangs crashing into crowds

[@ThePicko94]

RB is an amazing platform, americans just have no idea about them. There are heaps of Australian shops that specialise in RBs and have an unbelievable reputation.

[@stephencain3467]

ThePicko94 like maatouks racing Croydon racing development just to name a few

[@ThePicko94]

Matouks and Croyden both have 1000hp daily platforms, build motors from mild 500hp daily cars to 1500hp monsters. Its simply knowledge and experience of the platform, proper servicing and tuning. Andrew Hawkins from Motive recently displayed how strong the stock platform is.

[@mickleighton]

Rajabb racing,jdm industries the list goes on

[@RetemVictor]

Spoken like a true mechanic Alberto!!!! BTW maybe hit up the Mighty Car Mods guys one of their pals is a hard core RB head.. Saving your RB from ending up with a window in it good job!

[@44ro.n]

meanwhile... some guy in japan is laughing about how he sold a lemon r32 to a silly american

[@SChassisTuning]

An RB25 was set to go into my 240, took apart the Engine to see the same Cracked ringlands. Now Cylinder #3 hangs down from my rear tow hook as my SR makes all the power.

[@colerobinson3757]

Please do a correct engine management and tune. No factory ECU if u want reliability

[@zzumamufa]

I love big boost and all but maybe you should let someone who is really familiar and knows a lot about rb's specifically work on this engine, I just think its a safer bet if you really want something reliable. I know hp logic is in the florida area and tommy never had a problem with his rb as far as i remember so maybe you could hit them up.

[@JBPrins]

If you want the BIGGEST and BADDEST RB oil pump which isn't a dry sump, get the Suprasport billet oil pump with spline drive. It'll cost less than doing something like a Tomei or whatever with billet spline drive gears AND be better and stronger

[@automotivejourney7562]

Whats wrong with the N1 oil pump? Adam mentioned not getting that pump in the video? reason im asking is my brother is rebuilding his RB25 and from the forums a N1 oil pump seems good? thx

[@JBPrins]

Automotive Journey I run an N1 oil pump on my RB26. Just installed it fresh and new about 2000 km's ago and it's been fine so far running 510 at the wheels. There's reports from people of them failing around the web though which seems to scare people off of them. There's also reports of $1000 Tomei and HKS pumps failing but there's way more of N1 pumps because they're cheaper and therefor used more often. I know of plenty people running N1 pumps here in The Netherlands and having no problems with them. It's just that if you want an indestructible RB, I would go for the billet oil pump aswell. Only reason I didn't is its almost 1000 more than the N1 lol. I would however recommend it in Adam's application since he'll be beating the crap out of it. I know of people running RB's in drift cars in the UK that swap out their N1 oil pumps each year for preventative maintenance and swap over the billet gears lol.

[@automotivejourney7562]

Jb Prins Thanks for the reply, and for my brothers application I think he will be fine he won't need a 1000$ Tomei or HKS pump loll, last question I read on forums with the N1 oil pump to get the nitto extend crank collar as this helps with oil feed and a larger contact with the pump, what's your opinion on this ?

[@JBPrins]

Automotive Journey yeah imo (and from my experience so far) the N1 pump is fine for street applications but if I were to drift it/race it, giving it high RPM for extended periods of time, I would upgrade. The extended crank collar is only necessary on short nose cranks. I don't know about RB20's and 25's on that subject but the early RB26's in R32 GTR's all had short nose cranks. They changed that to a long nose crank somewhere in 1993 I believe. So atleast all RB26's from R33 and R34's already have the long nose crank which eliminates the need for the extended collar (which is basically a fix for the old short nose cranks)

[@artiems]

Its not so much the N1 pump as a whole, its the internal gearset. They are still made from cast powdered metal, same as the other OEM pump gears, meaning they are still susceptible to cracking when you beat on them Not saying the housings cant crack aswell, but deff a shit load rarer for that. The standard flat drive on the factory crank has relatively small contact patch on the oil pump gears, adding the collar will extend the contact patch. The bigger the contact patch....the less chance its going to slip and damage something. Im running a built 25det, N1 pump with billet gears from HSE here in perth (only like AU$400) and billet extended flatdrive crankcollar. We have the limiter set at 9k and havent had any issues with the the pump, and it see's excessive high rpm and limiter bashing every time it gets taken out.

[@JapaneseMuscleDE]

Tomei provides smaller oil galley orifice to retrict flow to the head even more, they are cheap and help a lot. Still you should do the oil return fro the head to make sure. Also i know for the rb26 there are special cam baffle plates that also help with the oil ventilation. I love my RB engines

[@CapeRoadsPOV]

As much as I love Alberto and his channel, please let an RB guru build this motor.

[@Cadecoops]

Jason Clifton 💯 agree, you watch he’ll build this engine and they’ll be running into problems within a couple weeks like the last times with the sr and then we’ll be him complaining about reliability of rb’s

[@Cadecoops]

Hearing**

[@lordperezident]

Jason Clifton true. Alberto should stick to his BMWs

[@lakaiskates8064]

Y'all think the RB is a mythical unicorn that only specialists can work on?

[@BRMPHOTOS]

Jason Clifton true e

[@ja263]

Can we see some longer videos at some point please? Keep up the great work though Adam, a true inspiration.

[@qqqqqqqq1407]

you don't get valve float with high HP you get it with high RPM. 2:56

[@427BDK]

petiyo101 Yessir

[@Fizzer99]

And high boost.

[@JamieD1994]

And with high boost and high RPM comes very high power!

[@Finnspin_unicycles]

and/or high boost

[@qqqqqqqq1407]

eatmydustdusteaters it certainly can.

[@AndrewEG]

You need to give Alberto a cuddle. He always helps you out.

[@Belicose777]

You have to remind Alberto not to touch used oil Adam. That stuff is absolutely HORRIBLE for your skin/health.

[@cupra_1p172]

Belicose777 work gloves would be good

[@gammalight1312]

All used oil is highly carcinogenic. Clean oil as long as it's not synthetic is ok, not good but ok according to an old teacher. Synthetic petroleum oils have been linked to higher estrogen levels in men. Used oil will accelerate or cause cancer.

[@gregh7457]

back in the 70's we used to have lot of oil burners on the roads fogging up both lanes. Chevy vega's leading the pack. Perhaps thats why we're having these gender issues with bathrooms now?

[@gammalight1312]

greg h heh it wouldn't surprise me one bit.

[@mclarenjohnf1]

He could have barrier cream on!

[@seansmile]

Friend has a rb25 neo , stock bottom end , stock head gasket , 650 whp on high boost , precision turbo , etc etc has been running for 10 years with no real issues, multiple track days. So if built right can be reliable.

[@noxious89123]

6:18 That was ace X)

[@MADEKUN]

Good research on the N1 oil pump and do the same on tge water pump and the head drain too. The RB is reliable you just need to take care of it.having own S1/S2 & NEO If never had a failure of know someone who did in Japan.

[@mattcappellaro]

I think all the oil was in the cylinders from when you guys did the compression test and pored a bit in to get it to jump to 150? :)

[@ethanrose1186]

Along with the oil drain for the head, you can also get oil restrictors to restrict the amount of oil that makes it to the head!

[@randystull1502]

See this is what happens when they are half assed.....build it right and it will quickly become your favorite car

[@TyRoxYaMan]

That skyline is so clean on the outside kinda makes me want an R33 sedan with some rad aero and cosmis racing wheels and a carbon hood

[@khristophergarner1009]

Cream on the inside bronze on the outside reverse of the 240 would be beautiful

[@jaydenpuckett3591]

Khristopher Garner this needs to happen

[@khristophergarner1009]

jayden puckett no matter what he dose to this car he dose not slack on builds i cant wait to see this car when its done hope its not going to be another 350 car tho its a dream car of 90% of car guys

[@jaydenpuckett3591]

Idk if big boost should build the engine though it seems like Adams sr was always breaking a after be rebuilt it

[@khristophergarner1009]

jayden puckett big boost is good adam sends it hard af

[@gokartsminibikesandmore9925]

How can you not love when big boost is in videos....please dont drift the car my heart cant take it getting. Banged up

[@AaronUnknownPerformance]

RB = REALLY BROKEN

[@DomBeal57]

mine never broke

[@meladath5181]

Only if you are a silly yank that expects it to run for 250k in the middle of the desert with 0 maintenance. The rest of the world has no problems with them.

[@Mr_Kordak_Smile]

I enjoy the time lapse when you work on the cars

[@willable5922]

Rotories are more reliable in racing applications than piston engines. FIGHT ME!!

[@monkkeye]

William Able no need lol you already lost

[@Allmotorsmoke]

^

[@anton903]

Mazda won le mans in 1991 with a rotary since they where the most durable and did not have any problems at all.

[@gabrielsabode]

lighter engine, infinitely easier to repair, really good throttle response and power per liter. < muh rotarie unrelioable

[@willable5922]

nawzy202 look up the number of rebuilds the JZ and RB motors of FD and the number of rebuilds Mad Mike does.

[@haydengreensmith6894]

Big Boost the piston whisperer lol Really looking forward to seeing how this build turns out!

[@hinatahyuga6999]

Big boost Alberto #wildberryboost

[@1HeavyWrench]

I've heard of people drilling/ Machining out the return galleries in the head and block. And of course running a oil return off of the back of the head to the pan. There's also some block off in the block itself that I've heard of people doing and then running a restrictor on the oil pump

[@Z33Garage]

How much for 1 of the broken pistons and connecting rod? I need one for a lamp :D

[@Havok412]

Dude go on ebay and just buy one there.

[@sn95_mustang_garage]

Bootlip repairs done to this car. That motor has seen better days and you got it at the end of life.

[@liaml5530]

You should buy a twincam for all the Irish fans

[@omgitsaaron1233]

liam L bap bap down the road

[@liamllower]

you stole my name

[@michealodonovan95]

Nah man all the kiddies have altezzas can't afford cams

[@erminskalejs2913]

Nah lad twincams are underpowered😂😂

[@neilcorcoran2560]

Have a king of the cone competition and try reinact donegal 😂 I wonder do the yanks have Buckie 🤔

[@chrisdemitris3341]

6:43 Love how Alberto says there is nothing missing from the Pistons and from what i see there is somerging missing bottom right 😂 i could be wrong tho and thanks for the great video 👍

[@ryan-574]

6:17 Aha, What would you do without Alberto.

[@padlockbeats151]

Big boost and that one piston survivor voice.. I lost it :)

[@Nehstea]

SR RB = money pit

[@lenny0347]

Nehstea Rbs last forever. Stop trying to give them a bad name. Clearly uneducated parrot repeating what the internet says

[@anybudz]

+2jz

[@Nehstea]

lenny 034 never said they don't last, just said money pit

[@WrxyDriven82]

Adam should Do nice DRY Sump setup for this RB Plus other nice tasty parts for the motor and rebuild the correct way.

[@noxious89123]

Also, to buy an unknown car and then drift it and hold it on the limiter... Is it any wonder that shit breaks?

[@morganmorlatt4870]

noxious89123 he said he wanted to push the car to see how it would respond. It was doomed to break anyway better now than later

[@Havok412]

Yeah I guess he should've just babied it and drive it like a bitch and never know the engine was bad...

[@DriftNick]

Smart people put it on a dyno and check the engine before doing a drift day.

[@bsfibers]

Planning on doing a forged build on my 3sgte this winter for the first time. This gets me hyped

[@berg9855]

You should sell the munstag I believe

[@Kevmyster]

Christol he said he’s going to keep it for at least an extra year since he loves to have a nice daily power and a/c

[@eliascardoza9202]

I'd like it to be street race car 🤗 like mine

[@kjbaccordtypes1512]

What a sick car. Please keep it good. The wheels also suit it

[@classys-chassis6433]

Have you ever heard of a 30 day lemon law get your money back or a gtr 32

[@josephrizzo7720]

BeyLovers INC it was imported and bought “as is” lemon law doesn’t apply

[@gammalight1312]

He knew it was a lemon, no doubt. Adam is a smart fella, he just wanted the deal on this one.

[@gimlysadasda]

Then he doesnt get paid for all the content that comes from fixing it. haha

[@rickybezjak9025]

For what ever reason I'm honestly not disappointed you're using it as a seat time car even though that very skyline has been a dream car of mine since I was 10 hahaha i cant wait to see how it turns out and at this point you should just expect every car you have besides the gt350 to be a project 😂😂😂

[@monkkeye]

Adam did you just spend good chunk $$ for a car that was destroyed from the start?

[@gabrielsabode]

er32s are pretty cheap, let alone modded broken ones.

[@ZachPPierce]

nawzy202 like $16k

[@willy_p_m]

The body/chassis is in perfect 👌 condition it's just the engine

[@Wileyinthestreets]

Yeah it was like 15k+ I'm pretty sure on the site, and this happens lol

[@monkkeye]

Zach Pierce Man not cheap body is in good condition but i feel bad that he got such a bad engine. The way the car looked i thought he spend 25k but was thinking that engine is in perfect condition

[@gammalight1312]

Yo! That's crazy every ringland was cracked, that thing must've been drinking oil like crazy! Everything was broken even the pistions eh, dang.. Warm up your cars before hitting full boost kids! Heat and cool, heat and cool, never full hot boost for miles and miles. Keep your oil clean and clear. Hypereutectic pistons don't generally hold together on prayers alone lol

[@johnc6466]

I came from Danny Macaskil's The Ridge. Hint hint Adam.

[@Maibulsak]

Pro tip for when you can't remember what bolt goes where... probe the hole with a screw driver to check the depth. You'll never put a bolt in the wrong hole again

[@rushaunroper9083]

U should jus go live while working bro

[@Rwdskyrine]

you can remove the hicas pump in the engine bay on the intake side, the pump and the lines that go to the rear diff can be removed. You just need to loop the power steering lines that go to the hicas pump.

[@peterking1134]

RB means ReliaBle !

[@ynfnl]

Peter King unReliaBle

[@famousoneferguson467]

So stoked to see what it looks like when it’s done

[@86TheEPA]

Values seat time more then anyone else but builds Sr's and Rb's definitely not a fan of Ls motors but damn that's the way I would of gone by now if I wanted superb reliability

[@ThatLegitBeast]

All Motor Hondas He's got the 350z for seat time.

[@86TheEPA]

ThatLegitBeast he said this was for seat time in a rhd

[@Havok412]

If he used the word "practice" instead of "seat time" would you guys be this anal about it?

[@lenny0347]

What in the world makes you think an rb is unreliable. Man the uneducated parrot talk on the internet drives me nuts. Learn and stop repeating.

[@86TheEPA]

lenny 034 defending a car and motor you'll never own or even touched okay buddy I'm uneducated for sure. Just because it's something you desire doesn't mean facts are wrong. I want a rotary but I won't lie and tell people it doesn't burn oil. Sorry your Dream engine is trash

[@RemexMatter]

Just a heads up don’t store the crank like that it could end up with a slights bend cuz it was never designed to be supported in the counter weight. You could bolt the fly wheel on and store it upright on that. Well that is if you’re gonna re use the crank.

[@alexthompson5172]

rb30!!!!

[@aussieguy1012]

amen man ive owned over 6 of em.

[@SpachsGarage]

im super happy you tore apart that RB, so many cracked ringlands!!

[@baileyhoward9687]

Rb25's are so messy... too much effort for me

[@Thescarecrow505]

Can you do some videos on the machining of your block and head and the machine shop? It would be cool to see part of the process. :)

[@based_will]

This motor is in need of a bottom end rebuild done by an RB specialist otherwise the same things will happen again.

[@cmsracing]

Get some forged pistons that will eliminate any pistons related failures. Don't forget to rebalance the rotating assembly because of the difference in piston weight.

[@theblakeslees7065]

Maybe one day you will get it together and get something with an na ls so you won’t have these kind of problems with 20 year old boosted Japanese engines

[@morganmorlatt4870]

Austin B did someone say LS?

[@PK-R]

I feel like every youtubers simple seat time cars, are never simple....

[@Doggs727]

Rb is love

[@fitt4life1221]

That pirates of the Caribbean reference was so on point 😂😂😂

[@levikeen3007]

Skrt

[@michaelrouth5612]

by far the coolest build on your channel skyline gt-s granted not a drifter guy. just like turbo cars/Japanese

[@colingreig1355]

Looks pretty bad on the shop that sold you a car with a bad engine..

[@unclebensriceballs]

Colin Greig it could have been bodged in Japan and flicked. Hard to identify something like this when buying modified used cars

[@chadadams5193]

Am I the only one that wish we could fast forward to the end already? I just want to see it rip.

[@georgejenkins6884]

V8

[@georgejenkins6884]

ha

[@maxwilding]

If you’re having the engine bay painted anyway why not get the bonnet painted too, would be much more hassle considering you’d already have the car there and the paint mixed it. Would make the skyline look so much cleaner. Just a thought

[@brilliantroads]

Time to move to some bigger LZ, your roast buddy TJ just got a brand spanking new shop with complete sponsored inside ....

[@eliascardoza9202]

_//target_blank he's spoiled he asks for to much

[@Havok412]

TJ is about making money not driving. Everything he does is for sponsors and never to improve himself in driving. Boring af if you ask me.

[@cartersargenti9324]

Kouki_Monster finally someone agrees. He’s got a 700hp Z and he still decides to sit in his shop and build stance cars instead of progress in his driving.

[@Rob.millii]

Honestly hoping you go with a dry sump to pair up with the external oil cooler for this!

[@matthewpitchford1529]

Albertos building it, it cant be reliable

[@leotredwell8531]

matthew pitchford shots fired

[@matthewpitchford1529]

Leo Tredwell how many times did alberto rebuild his bmw engine? How many times has adams sr20 blown?

[@monkkeye]

matthew pitchford adam should give you a call and show them how to build RB

[@eddyg7477]

matthew pitchford the bmw I understand. But the sr20 Adam beats the hell out of that thing.

[@2turnt259]

If it’s KZbin money it’s not a problem to have no clue what your doing lol

[@shemarcollier3457]

I love RB’s so much I’m happy your working on one

[@connoryoung1026]

Put your 2jz in the skyline

[@morganmorlatt4870]

Connor Young the car can’t handle isn’t built for that motor

[@nynja2934]

The 2jz is ment for the S15 hes building

[@rafaelblas3906]

You should twin turbo it, I forget the technical name but do one small turbo and the. A larger turbo for higher end! For what you're gonna use the car it makes perfect sense! Small one for instant boost and larger for the higher end power band to keep it boosting all the time. I'd highly recommend mend it and had great success with my drift RB with that set up. Seriously bro I'd really do it if I were you

[@zaksuzuki]

You've done it but can't remember the term? It's called compound turbo charging and it's nothing but huge amount of work and issues.

[@itsjustme7084]

Come on down to the LZ chop shop for all your car needs

[@maxcastillo6944]

Idk about anyone else but I have noticed that big boost has lost a lot of weight 🤷🏻‍♂️🤷🏻‍♂️ pretty sick 🤙🏻🤙🏻

[@jok3yjesu339]

I seen some people hating on Alberto, no let Alberto bulid it Alberto knows how to bulid a engine believe it or not

[@driftingpsycho86]

Get a rack to place all the engine part helps to keep open space and organized.