Wall Repair Kit With Everything You'll Need (DAP Patch Kit)

Wall Repair Kit With Everything You'll Need (DAP Patch Kit) Have a big hole in your wall, but no tools to fix it? DAP has you covered with their easy to use, all-in-one wall repair patch kit!
By far our favourite thing about DAP's wall repair patch kit, is that is comes with literally everything you need to fix a hole in the wall (knife, patch, spackle with DryDex technology, and sand paper). This means that you could have ZERO tools with you, pickup this kit from any big box store, and you're ready to take your wall from disaster to masterpiece- all with one purchase.
Whether repairing a hole from a doorknob, or removing an old landline telephone jack- this patch kit with DAP drydex dry-time indicator technology (meaning the spackling goes on pink and dries white), and a 5x5 inch Fiber Tough Patch, is so easy to use that anyone with any skill level can repair up to a 4" hole all by themselves! Say goodbye to that unsightly wall damage 👍
More info on the product featured in this video 👇
www.dap.com/pr...
Click here to purchase 👇
🇺🇸 amzn.to/3CijAR1
🇨🇦 amzn.to/3WBLe3L
As always, please let us know what you think in the comments below!
🚨 Looking for more from the Refresh guys? Don’t forget to subscribe to our channel 👉 / @refreshhomeimprovements or follow the links below for more DIY-friendly home renovation tips, as well as tons of satisfying, easy to watch videos on our other social media pages!
www.instagram....
www.tiktok.com...
/ refreshhomeimprovement...
www.refreshhome...

[@RefreshHomeImprovements]

Product links 👇 🇺🇸 amzn.to/3CijAR1 🇨🇦 amzn.to/3WBLe3L

[@sandyr3834]

😊so helpful when u post the link for canada as well. Most of the people 😢won't do that!

[@RefreshHomeImprovements]

@@sandyr3834 😁👋

[@scubagrant6045]

Right on, thanks. I bought this kit and watching your movie allows me to hit the ground running tomorrow morning. And you're a funny guy too. Added bonus to the movie. 😊

[@RefreshHomeImprovements]

Much appreciated (dan will be thrilled to know that there’s someone out there who finds him as funny as he does 😎)!

[@alexrowaan7326]

Came here to see if I should do a second coat or not, and I took your advice and did it - it turned out way smoother because of that! Thank you!

[@briholt2670]

Thank you for being one of the only videos that shows the project completely from start to finish 👍🏼👍🏼

[@angelagomez6140]

Thanks for the tutorial! I’m patching holes for my little Saturday project! New house, fun projects!

[@RefreshHomeImprovements]

Thrilled we could help! Lots more useful (and better quality) drywall tips/tutorials in our playlist here 👉 kzbin.info/www/bejne/laHZhIFnjNCBjaM

[@magalissantiago2817]

Lol..." my grandpapi!' you're a comedian too and a great tutor.

[@RefreshHomeImprovements]

😂 Thanks!

[@PhatDimes]

5:58 Rock solid and smoooooth as a baby's bottom! This part made me LOL at work! Great video my friend! :)

[@RefreshHomeImprovements]

Glad you enjoyed it!

[@JustChristianThings]

I got this kit from Home Depot but was nervous to try doing it myself for the first time. I was worried I’ll mess up and leave a big ugly bump on my wall. None of the other videos really helped.. You did the best job at showing and explaining it. Now I feel more confident to repair the hole by myself. Thank you 😊

[@Gunfighter03]

How did it turn out?

[@AlBooey]

Did it work?

[@raunchdressing2204]

This guy is a riot. He's like that kid in college who smoked pot, frequently, and did these wack-a-doodle videos for T.V. production class- which were subtly funny, but lost upon the other students. Now, that same clown kid, traded the bong for CBD edibles, some with a low THC content, is married, and making informative home improvement videos on KZbin. Well done sir.

[@RefreshHomeImprovements]

Lol, wow. Thanks (we think 😂)!

[@natertown]

😂 Dude! Wtf

[@denisebrady8707]

I just smoked a breakfast fatty then this guy came on. I can't be serious or like you said high as we are

[@christina_21700]

I just picked this up, thanks for the step by step. I have a hole where the towel rack punctured the drywall. Although I won’t be able to paint it, but at least it will closed and ready to be painted.

[@RefreshHomeImprovements]

Glad we could help!

[@sammyday3341]

You saved the day for me as I will be using this kit tomorrow for a hole left by a towel rack that pulled out. Thank you.

[@RefreshHomeImprovements]

Excellent! Let us know how it goes 👍

[@matta4303]

Very descriptive video for that kit. Exactly what I was looking for.

[@RefreshHomeImprovements]

Glad it was helpful!

[@wuldthatbeme]

Wow major difference! Will use this technique

[@RefreshHomeImprovements]

Happy to hear it!

[@tomorrowstools2159]

Great review! I’ve always wondered how well those kits worked. 👍 Now we know.

[@RefreshHomeImprovements]

Appreciate that! We’re here to help 😎

[@davidurtusuaztegui7082]

I saw this kit in store but I couldn’t tell if it had everything I need. I’m glad that was clarified

[@RefreshHomeImprovements]

👊😉

[@Chihuahuauno1]

Yeah, sure, they just decided to sell an all-in 1 repair patch kit without everything in it that you would need.

[@rebeccawoodin6386]

Thanks for the tutorial... Fist video that came up when i searched for video... Hoping to be able to do more of my home repairs myself by checking out more of your videos..

[@RefreshHomeImprovements]

Thanks Rebecca! That’s really kind of you to say!

[@soniarae3319]

Thank you for this! It looks very easy! Hopefully I can do as good of a job as you did! Here goes nothing, lol!😅

[@RefreshHomeImprovements]

You can do it!

[@miiaw9354]

I love the way you explain the procedures! very helpful thanks!

[@RefreshHomeImprovements]

Glad it was helpful!

[@thedanielleshow5439]

This video made me smile and laugh and also made my project so simple and fast so thanks lol

[@RefreshHomeImprovements]

That’s awesome (exactly what we’re aiming for 😉)!

[@Steve923]

Lazy guy question: after the first layer of spackle it seems to look pretty good. Why are additional layers of spackle needed? What improvement does a 2nd or 3rd layer make? Great video, Thanks!

[@RefreshHomeImprovements]

That’s a great question! The first layer of mud/spackle locks the patch in place and essentially fixes the hole. The additional layers ‘fan’ the mud out to help eliminate the appearance of a hump/bump in the wall (due to the patch sitting on top of the wall surface) 👍

[@Steve923]

@@RefreshHomeImprovements that makes sense. Can't be lazy 🤣

[@rosacruz5436]

Thanks for the video...i learned something today, greetings from las vegas!

[@RefreshHomeImprovements]

Glad to hear it!

[@professord44]

Great presentation 😁

[@RefreshHomeImprovements]

Thank you VERY MUCH!

[@moneymike473]

So, does the kit come with everything you need to finish the job or do I need anything else to get the job done?

[@Stephyayy123]

Omg you're amazing and a legend, heres a subscribe :) . Im definitely going to try this. May I ask if it is okay to apply on drywall ?

[@RefreshHomeImprovements]

Yes you can! Thank you so much!

[@janjohnson989]

Can I attached a toilet paper or towel tack to that spot after I’ve patch it with this kit

[@rontaswanson89]

Awesome video boss

[@RefreshHomeImprovements]

Thanks, Ronta!

[@slimyari83]

So glad I found your video. Thank you

[@RefreshHomeImprovements]

Thank YOU!😉👊

[@tupuedeshacerlo5085]

Amazing 👏

[@RefreshHomeImprovements]

Thank you! Cheers!

[@jakeracki3490]

Dude is solid... Texture does make it a bit trickier.

[@willdaven9583]

RESPECT ✊ THIS MAN VIDEO WAS SO HELPFUL!!

[@sandyr3834]

This is a really nice video, bro. So i have a question. If we want to put a hole on the same spot, is that possible or allowed?. Because in my situation, the previously lived owner in my home have put the same size but a little rectangular shaped holr for his tv cables. 😢incase if i want to wallmount tv, do i have to choose a different spot ? Thanks for this awesome video and detailed instruction. Really saves $$$!!

[@RefreshHomeImprovements]

Thanks! It would be better to choose a different spot. The area won’t be as strong as the surrounding drywall

[@fabio.erthal]

Thanks for the video! Super helpful. I just have one dumb question though, to be on the safe side. Does it matter what side of the patch I apply the spackle prior to putting it on the wall? You mentioned "back" of the patch so I just wanted to confirm. Thanks!

[@gregkennedy4648]

No it doesn't matter

[@ws67218]

What do you do with electric stuff hanging out? Push back in? Great video tho! Thanks😁

[@dailyfifa1239]

I don’t have a hole in my wall but it’s more like I peeled the paint and I can see the brown dry wall paper will this work for it so I can paint over it ?

[@RefreshHomeImprovements]

for something like that, we’d just skip the patch and put a couple skim coats of mud/compound over the area 👍

[@bfinch1980]

Awesome bro! 💯

[@RefreshHomeImprovements]

Thanks 🔥

[@cindyterrell6046]

Hi, I just ran across this, perfect🙏 and was wondering if you recommend putting kilts on because the person at Lowes said I needed to do that? Thanks

[@constancejenkins3867]

Awesome job 👏🏽

[@RefreshHomeImprovements]

Thank you! Cheers!

[@stephaniewaites5341]

Do you need to prime it if you add a few layers of paint?

[@jerica1573]

How do you smooth it out so the metal piece won't show ? It shows th thtough, but I do not want it raise but smooth. Thanks

[@RefreshHomeImprovements]

There is no metal piece in this kit (if i understand correctly), but the concept should be the same. You need to keep applying layers of compound/spackling to ‘fan out’ the raised area (essentially spreading it out over a large enough area that the ‘bump’ in imperceptible). If you do this enough/properly, then all youre doing with the sander is blending in the edges and making sure the top layer of the patch is smooth. You shouldn’t need to do a ton of sanding if done correctly 👍

[@jerica1573]

@@RefreshHomeImprovements there is a thin metal/tin piece for the wall repair patch. It shows through even with sanding

[@Lovethegreeks]

Very helpful tutorial for me who has never done this before

[@WrongFromWright]

i cut a piece of drywall out of the wall to put a cable passthrough, I ended up moving the passthrough because of a surprise crossbeam. Can I stick the piece of drywall i cut out to the back of the patch?

[@RefreshHomeImprovements]

We suppose you could 👍. You’d essentially be creating what’s known as a ‘california/butterfly/hot patch’. The concern would be that without securing the piece of drywall to anything (beyond the compound you used to stick it to the patch), it really wont provide much additional strength to the patch. If youre curious, we have a whole playlist on our page dedicated to different methods for patching drywall holes. I’ll link it below 👇 kzbin.info/www/bejne/d6PNmoiYoZl7jdE

[@LaShonda-z1n]

Can this be done in a day or must I wait a day in between?

[@RefreshHomeImprovements]

Without using “catalyzed” compounds (or hot muds) there’s no way to do it in a day👍

[@RefreshHomeImprovements]

You can use a heat gun to dry/cure things faster if you’re desperate

[@Frostye92]

i got a bigger hole, anyway I would be able to use another product to paint over? that small square aint enough

[@RefreshHomeImprovements]

Anything bigger than this and we’d recommend patching with drywall. We’ve got a bunch of tips/techniques and tutorials on our page here: kzbin.info/aero/PL66cwKx1YOgtmTZ4rKyKG5hIS954nqSds&si=VOvRhEiK5Bx2ZiG4

[@priscillaguirre8266]

Sorry, a girl who just bought a house and trying to learn here. lol. What did you do with the wires? I'm assuming you have to kill the breaker for the room and then what, tug the wires out? Cut them? Or did you just stuff them into the wall? Everything else seems pretty easy, thanks.

[@RefreshHomeImprovements]

Because it was a telephone line, it’s not dangerous to cut them at the box. Still, the best thing to do is to find the network interface (usually on the side of your house or in the basement) and disconnect the wires out there, that way, none of the wires in the house have any voltage on it. If you can't do that cut the wires so they are at slightly different lengths and wrap the bundle together in electrical tape. DO NOT DO THIS if you are unsure of the type of wire you’re dealing with. If it’s an electrical outlet or a junction box (or you’re unsure) get an electrician in to disconnect the wires from the panel properly 👍

[@MTLuvsU]

I’ve got a project I’m about to start where I’ve got some drywall that’s peeling. Do you think it’s appropriate to patch and follow this method? I’d be using a bigger mesh because it’s quite a bit of peeling.

[@Jbooogie-we3nv]

Amazing

[@Youglogirl23]

What it I forgot to apply it to the back is it a big deal?

[@shaquanrumproast9325]

@refreshhomeimprovements are these patched holes ok to use with screws or nails..specifically, would the weight of a curtain rod be ok?

[@RefreshHomeImprovements]

No unfortunately not. If you’re going to want to hang something on a patched area you will have to patch with a new piece of drywall

[@Jazmenb]

How long can I store the extra puddy for? Will it dry up? Should I store it a certain way?

[@RefreshHomeImprovements]

As long as you keep the lid on, it lasts for a shockingly long time (hard to say exactly. It might have a best before date on it too 🤔…). The only time we’ve had one dry out, turned out there was a crack in the tub 👍

[@karrywang1214]

Can u ask what’s paint you are using? I got the exactly same color wall I need to repair, but I don’t know what color that is.

[@lindad1194]

Awesome 👌! I'm about to go buy this. Has anyone told you, you look like Joe from "you"! ❤️😄

[@RefreshHomeImprovements]

Thanks! Believe it or not, he gets that one a lot 😉

[@CulturedGem]

Dang, you skipped a part. Do you cut the wires or will you get a shock. I'm trying to do this by myself and well, I am not a fixit person. Thank you

[@RefreshHomeImprovements]

Good question! This was an old phone jack (low voltage line), and had been disconnected at the panel, so we knew it was safe to delete. If you are unsure of what the plug is, always consult a professional (electrician, or service provider). Never cut a wire without knowing exactly what it is/ if its live 👍

[@jacquesviau6165]

Thank you bruh! Saw out yesterday at Walmart. Heading later to the store. Question are you sure it won’t crack since others claim to use wood to secure the patch?

[@RefreshHomeImprovements]

Think of this patch as the drywall tape you’d apply to a seam to prevent cracking at a joint. As long as it’s applied properly, you shouldn’t have any issues 👍

[@anvil3999]

Can you drill a hole for screws after that? I’m trying to fix a towel rack of mine

[@RefreshHomeImprovements]

Unfortunately not with this method, no. There’s nothing for the screw to bite onto with this solution. You’re looking for a repair more like this one 👉 kzbin.info/www/bejne/baTaaJaGhMaMY6c

[@pebbles2482]

How can you tell which is the back? Uh, dumb question, cuz both sides look the same. So you end up putting the pink stuff on both sides?

[@RefreshHomeImprovements]

both sides get covered with spackling compound (which makes it surprisingly strong), so it doesn’t really matter which side goes to the wall. If you follow the instructions on the pack it’s very straight forward 👍

[@samueladams584]

I literally just pulled one of these off the wall in a spare room.. I was wondering what I'll do to fix it

[@RefreshHomeImprovements]

If it’s done correctly you shouldn’t be able to locate it (let alone pull it off the wall 😂). Perhaps it wasn’t installed properly?

[@seztogaming4186]

@@RefreshHomeImprovementsI think he’s talking about the phone jack

[@kingpolotgwu9032]

Why did you put it on the backside first? I don’t usually se that

[@RefreshHomeImprovements]

That’s what the products asks for. Added strength perhaps?

[@bigben72285]

This is hilarious!😂

[@sticktron2857]

Can you get extra pieces if the hood is slight bigger

[@RefreshHomeImprovements]

There’s definitely a limit to the size of hole you’d want to patch with this technique (the maximum size is listed on the product). For larger holes we have other methods we prefer, and you can find them here 👉 Different Ways to Patch Drywall kzbin.info/aero/PL66cwKx1YOgtbTYSU3K8Quq-TPdRDchXO

[@Ted_Michaels]

Sorry - I do not get it - how do you match the texture of the wall?

[@RefreshHomeImprovements]

In this example the wall isn’t textured. In this case, it’s simply a matter of making the smooth patched area blend in with a wall thats been rolled many times already. Our best advice in this instance is the paint the patch with a thicker nap than the wall has (might need to do this a few times), then paint the whole thing with a finer nap roller to blend it in with the rest of the wall. If the wall is textured, once the patch is completed, you would apply the textured finish to the smooth patched area and try your best to blend it in with the surrounding wall (not an easy task). 👍

[@Ted_Michaels]

@@RefreshHomeImprovements Thank you for the clarification and advice. I appreciate it.

[@thesoldiercod187]

Great review, you made me laugh😃

[@RefreshHomeImprovements]

Happy to hear 👍 we try our best 😂

[@davids8119]

Great work... but I bought the kit at target for 10$

[@MultiLisa10]

Thx!

[@RefreshHomeImprovements]

No problem!

[@colinf84]

How do you get the texture on the wall to match the patch?

[@RefreshHomeImprovements]

textured walls are always a little trickier- but if your wall is just drywall, then the nap/pile/thickness of the paint roller you use can help blend it in with the existing painted surfaces.

[@paulacampos970]

There's texture spray in a can for someone who doesn't know much about patching and etc that is a easy option. You just spare on the texture and let it dry them paint over it.

[@sniperpaintcorrection]

I can see the mesh again.. did I sand too much??

[@RH-gz7or]

Mesh is pretty thick huh for what it is? Tad too bumpy.

[@joseescobedo7899]

I just have a drill hole that need filling after messing up pitting a shelf ... Also i have a rental

[@stephaniehelton5876]

Does anyone find that the patch looks like a bump on the wall?

[@RefreshHomeImprovements]

You need to ‘fan’ out the compound more to blend it in. In other words, add more compound/spackle to the edges of the patch so that the “bump” ends up as an imperceptible slope 👍

[@sidramir3211]

did you paint the whole wall again?

[@RefreshHomeImprovements]

Nope, just the general area that we patched (and then we ‘feathered out’ the roller to help blend the paint in with the rest of the wall without a hard edge)👍

[@stacy8522]

Doesn’t this stuff only take 15 min to dry, not a whole day right?

[@RefreshHomeImprovements]

Drydex Spackling can take hours to dry. Our favourite is Fast Dry Premium Spackling for quick repairs

[@Yasmine-rz3rm]

Thank you

[@rjdodgerz2776]

How long does it take for paste to dry up?

[@RefreshHomeImprovements]

Completely depends on the thickness of the application. Thinner coats will dry in a couple of hours thicker coats will take longer. The spackle in this kit has their Drydex technology which goes from pink to white as it dries so you’ll know as soon as its ready 👍

[@rjdodgerz2776]

@@RefreshHomeImprovements thank you

[@furmama7986]

Hilarious. This guy is great. 🤣

[@RefreshHomeImprovements]

Much appreciated 👍

[@josephjezrawi]

But you didn't use any primer?

[@RefreshHomeImprovements]

The paint we used as a topcoat is also a suitable acrylic primer for small spot applications like this (but you’re right to question it)👍.

[@pizzapiee]

Hi, how did you remove the wires?

[@RefreshHomeImprovements]

Because it’s a telephone line, it’s not dangerous to cut them at the box. Still, the best thing to do is to find the network interface (usually on the side of your house or in the basement) and disconnect the wires out there, that way, none of the wires in the house have any voltage on it. If you can't do that cut the wires so they are at slightly different lengths and wrap the bundle together in electrical tape 👍

[@pizzapiee]

Can I do the same to cover up an old ceiling light I removed?

[@RefreshHomeImprovements]

@@pizzapiee Any electrical wires would need to be disconnected from the panel (or at the very least at the switch) by a licensed electrician first. Definitely DO NOT just patch over potentially live wires (or any wires your note 100% sure about)👍.

[@MontieSkaggs92]

“I better sell” LMFAO

[@2gunztimeformoney961]

It takes 3 days for it to dry ? Sheesh

[@janetroberson1]

This will work for a small hole. It's great. Not for larger holes, like those for phone jacks.

[@RefreshHomeImprovements]

Not sure what you mean, you just watched a video of it working well for a phone jack.

[@nosut7996]

0:24 is definitely funnier than 0:41

[@RefreshHomeImprovements]

in hindsight, we totally agree 😂

[@zkami8788]

Thank you my dumbass friend punched multiple holes into another friends house. This video is gonna help big time but he’s paying for the costs im repairing it myself

[@RefreshHomeImprovements]

As he should! Glad we could help, and good luck 👊 👍

[@TheLwaller09]

Hi, does this kit have EVERYTHING i need in it? Video unclear.

[@lilkharm]

1:10

[@Tsonontowan]

I'm not sure.

[@Tsonontowan]

Maybe

[@maz1071]

this made me hungry

[@taylorgoldston8229]

Is this Shawn from boy meets world

[@RefreshHomeImprovements]

😂 thats a new one! We like it 👍

[@denisebrady8707]

I haven't laughed this hard in months! You do have a future as a comedian no bull. Who do you really think wants a big hump in the wall then painted over it. Next guy is gonna be sanding his. Maybe in an apartment but not in any home terrible advice

[@canadianspiritz3844]

That'll create a bump in that wall 😆. I don't recommend this wall patch,

[@RefreshHomeImprovements]

If done correctly, you shouldn’t notice the bump at all. Takes a little practice to fan it out properly 👍

[@mijit.859]

What bugs me ! Is that when you apply so many applications of that pink patching filler ok 👉You end up with a ‘HUMP’ on the wall surface instead of a uniform FLAT smooth finished surface!! Hopeless !!! 😞

[@RefreshHomeImprovements]

It really shouldn’t be a ‘hump’ when you’re done. You apply enough compound to cover the patch AND to fan it out wide enough so that when you sand it back (to the depth of the patch itself) the raised section is so gradual and minimal you’ll never see it 👍

[@mijit.859]

@@RefreshHomeImprovements You really need to see it ? The way I see it in your video ok - Anyways 🥺

[@alocin110]

DISLIKED YOUR VIDEO BECAUSE OF POOR AUDIO. YOU SHOULD WATCH YOUR VIDEO BEFORE MAKING IT PUBLISHED.

[@RefreshHomeImprovements]

Sorry about that. We filmed and posted this a few years ago and have since upgraded our audio equipment.

[@marvindiaz8202]

Such a hater! he honestly did a great job showing step by step instructions good audio or not

[@michaelmode]

Thank you

[@RefreshHomeImprovements]

You're welcome!