Thanks for this video, it definitely led me through all the right steps and hopefully cured our issue. There was a lot of ice built up around our ice maker that made it a challenge. Within that ice was some mold which freaked me out a bit, but what's done is done. Total replacement time was about 1/2 hour. Repair guy wanted near $300. $200 of that just labor. Ordered the new maker from Amazon. Whirlpool 2198597. Thanks again, extremely helpful.
@LisasWorld100Ай бұрын
Thank you. Changed it like a pro. You saved me lots of money.
@cmcelhattan44018 жыл бұрын
Saved me from a big repair bill. My ice maker was all frozen up,I think from a rouge ice cube getting stuck under the prying fingers. they ended up buried deep in the cubes. I was able to remove , thaw, and replace with ease thanks to this video. working fine in just a couple hours. Thank you again
@stevenmarsden22577 жыл бұрын
Running a hair dryer into the unit for a minute or two sounds alot easier
@rock-on6nt3 жыл бұрын
Great video Steve. The only thing I would add is when reinstalling the ice maker one might need to bend the black filler tube up so that it will clear the ice filler cup and allow one to slide in the unit.
@beckydark46229 жыл бұрын
Thanks so much for these step by step easy to follow instructions! I saved a repair call and was able to replace the icemaker myself after 6 months of no ice.
@DeannaSharing3 жыл бұрын
I love KZbin and you! I could have never done this without you.
@sroberts9018 жыл бұрын
This was very helpful. I was able to replace the ice maker myself, saving a bunch of money! Thank you for such a great instructional video!
@aprilpeterson16573 жыл бұрын
Hi Steve, thank you so much for this “How to Do” ice maker installation video. You made it very easy for us to accomplish the replacement of the ice maker with your step by step instructions. Spot On! We give you 5 stars, two thumbs up, and highly recommend you to others.
@Planospiritual9 жыл бұрын
Steve, you are a lifesaver! Couldn't have done it without you. thanks Martha in Texas
@aliciahinojosa20995 жыл бұрын
I order the motor modular with help from lady in parts dept. Than saw your video. Didn't think it would be so easy! Your explanation video is great. Thank you sooo much.
@familygertiser8756 жыл бұрын
Appreciate the video. I just completed the installation with no surprises. You saved me at least 150 dollars on the service call.
@mitch5810011 жыл бұрын
Thank you! I took my old one out long ago as it quit working. Now we are selling our house and the appliances are staying. I bought a new one and really needed to refresh my mind as to how it was installed. Thank you for this video, it was a breeze! Warning to others, make sure you unscrew and keep the ice-maker bracket in a safe place if you're not ordering an ice-maker right away as the new one doesn't come with it (I had to order one).
@partselect10 жыл бұрын
I hope the house sell goes smoothly and you're welcome for the help!
@homazarrinnahad64382 ай бұрын
Very helpful video. Followed it and the new replacement ice maker was installed without any issue. Thank you
@vprout11954 жыл бұрын
Great video! I bought the parts cheap online and it only took 1/2 hour to do the job! Super happy with how easy it was and the fact it works!
@allen75637 жыл бұрын
Thanks, very helpful. Easy to follow. I was investigating why water squirted out the back of the refrigerator. (It turned out to be an 1/3" long ice block in the black rubber hose plastic tube [inside the freezer at the top, pointing straight down] that feeds the icemaker--the water had nowhere to go and backed up until it squirted out around where the goes in at the top/back of the refrigerator. Probably due to stuff I had stacked up behind the icemaker, ruining air circulation. Or, perhaps because the ice was full and unused for about a month so no new water had flown into the tube in a while. When I grasped the black rubber hose my hand warmth thawed it and I could squeeze out the small ice blockage. If it was some more serious problem, the entire hose would have probably been frozen.) The base on mine icemaker also needed cleaning. So, again--thanks!
@kathysantilli646810 жыл бұрын
Perfect directions! I was able to replace the icemaker thanks to the easy to follow video!
@partselect10 жыл бұрын
Glad we could help, Kathy!
@archae8612 жыл бұрын
I did the 5-cube narrow model using this video. THANK YOU! Some of my problems--in case it helps others. 1. The door mount slightly interfered with pulling the unit out. But a little wiggle got past it. 2. On reinsertion--must align the unit fully right. I had it about a quarter-inch to the left, which could start, but quickly hit a stop. I forced it past that stop, and hit another. 3. Removing and reinstalling the wiring harness cover is rather awkward. Persevere.
@argjr5511 жыл бұрын
Thank You. This is what the internet can do. You made it so easy.
@srmauk10 жыл бұрын
Thank you! I replaced my ice maker (exact same one) in a snap by following your video.
@partselect10 жыл бұрын
You're welcome, srmauk! We are happy we were able to help you out with your DIY repair!
@donnavaneerden31417 жыл бұрын
Thanks so much! We were able to do the ice maker repair ourselves and save money. Thank you.
@partselect11 жыл бұрын
Hi Jim! Thanks for your question. After some searching, yes - the ice maker assembly with part #2198597 will be compatible with your KitchenAid refrigerator, model #KSRA25ILSS01. I apologize that this isn't clear on our website! Please let me know if you require any further assistance. Take care.
@partselect11 жыл бұрын
Hi Irene, Thanks for your question! Sorry to hear about this problem with your refrigerator. Sorry for my confusion, but do you mean that the ice in the ice maker will thaw three times in ~12 hours? Any details would be great! Thanks!
@jaybeaux2 жыл бұрын
Great video. Is there anywhere I can find out how to replace the water feed for this ice maker? My ice maker is spraying water over the inside of the freezer, everything is encased in ice now! Thanks for any guidance.
@pspaulson9 ай бұрын
Were you able to replace the line inside the top of the freezer cabinet? I think it freezes up due to a leaking water valve and eventually plugs the line. It can split the line if not fixed quick enough. I hate to do it, but I'll probably have to empty the freezer, turn it off and thaw the line...
@mohammadrezadavari42003 жыл бұрын
Thanks.This video was very helpful,I easily fixed the ice maker and saved money and time. 🙏🏻🙏🏻💐
@swtpeteswtpete15157 ай бұрын
Yes but unplug fridge first yes, plus also, how to remove the ice bin catcher when the latch or pedal or tab fails to release the bucket when depressing it?!
@tomboysen471410 жыл бұрын
Steve, Simply put, YOU ARE THE MAN!!!!! What a great video! Followed your steps exactly for a trouble-free replacement. Any opinion on the off-brand replacement icemakers for Whirlpools? I haven't exactly been overwhelmed the quality of the original Whirlpool part (second time I've replaced icemaker).
@densonnetworks15838 жыл бұрын
This really helped me fix my ice maker!
@janzrtart32211 жыл бұрын
Your video was very easy to follow - thank you. We have a Kenmore side by side model 51252101 with icemaker model W10190961. It was making no ice. We removed and disassembled the icemaker. We found solid ice on the heater fins and ice crystals in the chamber with the rotating control disk. After thawing and drying it out, we put the icemaker back in and got ice in 2 hours. After that, no more ice in the next 14 hours. Other than waiting, is there anything else we should check or do?
@otisgleaso7 жыл бұрын
Thanks Steve - great video - This made the repair easy!!1
@chriscummins252910 жыл бұрын
Great video. Replaced mine in 15 minutes. Yes. It is making ice.
@partselect10 жыл бұрын
That's great news! Glad the repair was a success!
@artmage211 жыл бұрын
Great video... I have a Whirlpool Gold GS6NBEXRO01 side by side looks like the fridge on video except where you get the water and ice look different. Inside looks the same. My question is... How do you know if it's the ice maker or the sensors that are not working? Water gets to the ice maker. This unit use to make ice cubes fairly fast... maybe from almost empty to full within 6 hours. Now, it seems to dump a tray 3 times in about 12 hours... * I bumped up the freezer to a colder setting...
@lionessmovement13642 жыл бұрын
U just saved me $200! Thanks!
@freddiehutt53865 жыл бұрын
Great video my ice maker was leaking so I took it out dried it out everything seemed fine but now no water coming out of the tube.I had no problem with that before. mad sure the tube was in the proper spot .Any ideas
@azfluffy63328 жыл бұрын
thx - very clear and helpful!
@samuelthompson31823 жыл бұрын
I've got a question for you Steve. My new ice maker takes about 1:45 min. to 2 hours to make a batch of ice. This seems like a long time to me. Is this normal? I usually have to replace the ice maker about every 2-3 years. Also, I had to use the old wiring harness because ours mounts from the front of the freezer to the back-not from the left side to the right like in this video. The wiring harness that came with the new ice maker is about 2-3 inches too short but is exactly like the one in this video. Is there a special wiring harness that I need to buy? Our Whirlpool side by side is about 13 years old. I clean the condenser coil about every 3-4 months.
@jimenapina7695 жыл бұрын
I need help I recently moved to a new apartment where the fridge has a ice and water dispenser and I don’t know how to put water in it or how to put ice I have the same fridge shown in the video I need help
@charlesschuster79632 жыл бұрын
heh heh, you forgot to put the shelf back in place. Otherwise, well done, I'm about to do the job myself on Christmas Day.
@lynnefreeman2221 Жыл бұрын
We had one of the wires on the harness break right where it goes into the wall. Can that be replaced?
@BJRebecca8 жыл бұрын
Awesome, thank you!
@TejasToolMan11 жыл бұрын
thanks for the video you made life easy again =)
@TonyNapoli2 жыл бұрын
Thanks Gonna go tackle that tonight
@mail2cmuthu5 жыл бұрын
you are awesome sir, thank you!
@bradcardini9412 Жыл бұрын
What is the part number for the water valve in this video
@usa4x4trucks11 жыл бұрын
Can I assume that this is the exact same part the fits the KitchenAid KSRG25FKSS04? When I look up the P/N 2198597 (or D7824702) they don't have the end white cover and some say wiring harness not included. -- Thanks
@bartsmith65083 жыл бұрын
After installing and putting everything back together I still am unable to get anything to work any suggestions
@jimdefina844911 жыл бұрын
Refrigerator is a Kitchenaid model # KSRA25ILSS01 side by side refrigerator. I've tried calling Whirlpool for the ice maker replacement assembly part # but they say that one wasn't made for that model. Have to order parts separately. The assembly looks identical to the one in your video, as well as the fridge. Will the ice maker assembly part # 2198597 "fit" in my model fridge? Thank you.
@mikewbama11 жыл бұрын
I have a Holland model #bs24x9dk,,,it worked until i moved fridge from 1 house to another.I tried the jumper wire from T H and no movement.I took another icemaker the same same from another and put in.It made 1 cycle and now quit.Any ideas or should i go ahead and order a new 1 and try that..
@wphughes18 жыл бұрын
Thank You
@tablesawer7 жыл бұрын
Replacing the ice maker onto the tracks was extremely difficult as you can't rotate the unit in side the compartment- it is too wide. What a job it is to connect the harness while it is on the tacks as the harness is too short and then try to insert onto the tracks ! The video does not show how difficult it is to do and skips over this hassle.
@partselect7 жыл бұрын
The model used in the video was wide enough to allow us to rotate the icemaker into position after the harness was connected, but it was a tight maneuver.
@automaton62610 жыл бұрын
Thank you!
@partselect10 жыл бұрын
You're welcome!
@aplance8 жыл бұрын
what about the wiring harness from the refrigerator(ice maker connector)? Ever had to replace that? If so have any ideas? Thanks.
@partselect8 жыл бұрын
+Andrew Lance The wiring harness is not a common part to fail. You can check for continuity with an multi-meter if you suspect a problem.
@btraylor110 жыл бұрын
My problem is with the ice bin / crusher in the door. It is stuck and I can't figure out how to get it off! The button on the right side is stuck in the depressed position. I've managed to loosen the thing somehow, but now it just rocks around, but I can't get it off to replace the part.
@beckydark46229 жыл бұрын
Bonnie Traylor I'm assuming you were able to get the ice bin off the door by now. But in case it's still stuck.... when mine got stuck I had to clean out the ice that was impacted down on the bottom of the dispenser. Be careful not to cut your hands on the blades.
@SColdman110 жыл бұрын
I wish I had found this video before I did the job! I managed to figure it our anyway, but I also managed to damage the black spout that the water fills from! Now when it fills it also sprays water through a split in the spout. I don't know what it's called so I can't even find the part. Can you tell me what it's called?
@partselect10 жыл бұрын
What model number are we talking about?
@SColdman110 жыл бұрын
The fridge model number is GD5RHAXNO00 TYPE 25SSA Whirlpool. Icemaker 2198597. Thanks for responding!
@einsteinagogo351610 жыл бұрын
I have an ART721 full 3xart721f01 the icemaker has been removed. what is the part number. I've never seen what it looks like even. ( i inherited the freezer ) I know I could fix it if I could find the parts.
@partselect10 жыл бұрын
If you go to our website and enter in the model number you provided - then you'll see the list of parts for your ice maker. The ice maker for your model is an optional piece and the parts will have to be individually ordered. The other option you can do is contact the manufacturer and see what information/parts they have available.
@bigchrisdom2410 жыл бұрын
Do you have the item number for the auger and ice bin on the door
@partselect10 жыл бұрын
I can see what information I can turn up but will need the model number so I can provide the correct part for your fridge.
@donnabrownlee2109 жыл бұрын
my icemaker is leaking water on the floor. how do I shut off off the water line. It is not in the refrigerator. it is a free standing unit. help
@partselect9 жыл бұрын
+donna brownlee I am looking into this and will get back to you shortly.
@tylermcafee12048 жыл бұрын
my ice dispenser is not letting the ice come out how do i fix it
@partselect8 жыл бұрын
+Tyler Mcafee What model number do you have?
@sixsentsoldiers5 жыл бұрын
At least they make it easy to replace. Ice makers are complete junk now days. Maybe good just to plan on replacing them every 3 years. Buy in bulk.
@artmage211 жыл бұрын
Great video! I have a Whirlpool Gold GS6NBEXRO01 side by side looks like the fridge on video except where you get the water and ice look different. Inside looks the same. My question is... How do you know if it's the ice maker or the sensors that are not working? Water gets to the ice maker. This unit use to make ice cubes fairly fast... maybe from almost empty to full within 6 hours. Now, it seems to dump a tray 3 times in about 12 hours... * I bumped up the freezer to a colder setting...
@Lakeman-fb6vl6 ай бұрын
I know it’s 10 years, but did you ever get an answer for your question how to possibly test the unit?