Removing fan and low boy trailer repairs

C&C equipment link:
www.ccsurplus....
/ @c_cequipment
shop Dirt Perfect
www.dirtperfec...
Facebook
www.facebook.c...
Instagram
www.instagram....
Ariat links
• Save 10% off your first order - ariat.dkkdet.n...
• Dirt Perfect's Favorites - ariat.dkkdet.n...
Always an adventure, several hours on the road dropping off the low boy trailer, got an emergency call and trying to work on the 850j.
#lowboytrailer
#850jdozer
#shopwork
#greasefittings
#equipmentrepair

[@falcon8553]

I'm 68 years old. Man oh man the banana seat bike took me back 53 years back!! Awesome!! They were very popular then.

[@bigchuckyinkentucky6267]

Many years ago I was on the volunteer fire department. Our county had a new station built which the fire chief designed. To save on cost we were helping with some finishing touches after the building was put up and I kept noticing that the bay doors looked very narrow. I asked the chief to which he answered that he had measured the trucks himself and made absolutely certain that there was plenty of room. I then asked if he measured the bumpers or the mirrors. The look on his face was priceless. You had one inch on each side.

[@rays8611]

I know a dept. that did something similar except it was height, they measured to the roof line and forgot about horns and light bar. Instead of adjusting the door height they put the horns and lights on a flip down bracket which was a total disaster in itself.

[@C_CEQUIPMENT]

Don’t forget the grease fitting on the center of blade on the back side of cross bar I know it took grease when it left but gets overlooked

[@warrenmichael918]

Come on ClintON , you know this video is at least 2 months old dont ya?? LOL How do you guys go about tough grease fittings? You use the penetrating oil pen thing that you hit with a hammer that injects the fluid into the fitting?

[@DirtPerfect]

Yup got it thanks buddy

[@donalddehaven3229]

It’s a good thing you had the low boy gone over because it was a disaster waiting to happen. Clint did a great job on it. Glad to se MBTS back and life is good. Love the channel.

[@aaronbummmanbehindthescene4931]

Thank you 🤙🏻

[@mischef18]

The banter was flowing well with this video bro and got a few things done as well, I call that a win. Safe travels

[@charliehill6914]

You've got one heck of a hard steel trowel finish on that shop floor!

[@leandro9311]

Saw the lowboy repairs on C&C channel and it ended up awesome, its incredible how bad it was but now its fantastic

[@bunnygirls556]

*Only for fans over 18 years old* girl in perfect BODY G BUNNYGIRLSS.SITE ❤️ cup milk god & perfect erotic body constriction god Toro face transcendent beautiful sister like a famous model tricks I do not know Megan: "Hotter" Hopi: "Sweeter" Joonie: "Cooler" Yoongi: "Butter So with toy and his tricks, do not read it to him that he writes well mamon there are only to laugh for a while and not be sad and stressed because of the hard life that is lived today. Köz karaş: '' Taŋ kaldım '' Erinder: '' Sezimdüü '' Jılmayuu: '' Tattuuraak '' Dene: '' Muzdak '' Jizn, kak krasivaya melodiya, tolko pesni pereputalis. Aç köz arstan Bul ukmuştuuday ısık kün bolçu, jana arstan abdan açka bolgon. Uyunan çıgıp, tigi jer-jerdi izdedi. Al kiçinekey koyondu wins taba algan. Al bir az oylonboy koyondu karmadı. '' Bul koyon menin kursagımdı toyguza albayt '' dep oylodu arstan. Arstan koyondu öltüröyün dep jatkanda, bir kiyik tigi tarapka çurkadı. Arstan aç köz bolup kaldı. Kiçine koyondu emes, çoŋ kiyikti jegen jakşı dep oylodu. # 垃圾 They are one of the best concerts, you can not go but just seeing them from the screen, I know it was surprising 💗❤️💌💘

[@arnoldromppai5395]

yup i seen it too. here in Canada it would never get that bad, as we have to have a shop do a safety inspection on all trucks one ton and up, and trailers over 10,000 GVW every 12 months, with a yellow safety sticker in the driver side window, it cost me $1200 a year for the inspection for my 5 ton and $600 for my 14,000 gvw trailer, not including any parts or repairs, all wheels have to come off,the shop go over it like a fine tooth comb. its there shop and mechanics license on the line, worst is so much as a hair line crack on the wall of a tire it fails, there just whether cracks, how many tires i have had to change were the tread 9% new bu a small side wall crack.. $1200 each an Michelin tires are the worst, my front steer tires didnt even have 1500 miles on them and had to replace both front tires. Michelin refused to go good on them at all, both tires had a small star crack. jumk.. $2700 gone. my 4 back re-treads have been on that truck for years no cracks

[@leandro9311]

@@arnoldromppai5395 Wow

[@zaccheus]

@@arnoldromppai5395 wow, glad we don't have that here

[@arnoldromppai5395]

@@zaccheus ya wish we didnt, i even have to do it on my farm plated trucks trailers.

[@johnbarham7718]

Your mate is very optimistic. New pins indeed !!!!!

[@oldschoolhoosier]

Wow…..Pullin the 850 J in was one of those “you can get there but your glasses need to be on crooked”…..lol. Sleeping on it always brings a fresh set of ideas and patiences to any challenge…lol. Great Video Mike.

[@patriot1182]

Clint is such a humble great man! Great video!

[@chadgodfrey4364]

C&C did you right on the repairs on the lowboy.

[@SparkysGarage]

Lock and Lube makes a zerk fitting attachment that loads up with penetrating oil that you can hit with a hammer and load up the fitting with oil. Also I've never tried it but sometimes i've heard throwing a little heat at the fitting can loosen up the old grease. Another great vid!

[@sassafrasvalley1939]

My neighbor uses the lock and lube grease buster… another thing that works, for me, on some fittings is to change the pressure in the joint. Sometimes adding down pressure or uplift will open the flow.

[@Crewsy]

I was thinking of the same item but it’s still likely better to remove the pins since the grease might flow but only on one side of the pin.

[@marionstorm9004]

The mechanics in our Case backhoe shop would use a hydraulic handpump (or porta power) plumbed into to zirk hole to put pressurized oil to break through dirt and rust clogging the bearing channels. Worked pretty well with the oil able to penetrate better than grease.

[@DirtPerfect]

Have videos on the channel doing that stay tuned

[@sethwells5266]

When the first dozer stuff with C&C started, I jumped conclusions and left a not pleasant comment about them on one of your videos and I doubt you remember or even care but I’m man enough to say I was wrong and do apologize. Seem like some good guys and I’ve actually watched their channel and your low boy repair videos. Glad you guys have kept good relationships and seems to benefit both of you.

[@DirtPerfect]

Yup awesome guys

[@jenniferwhitewolf3784]

It sure has been fun to see how that developed. Clint ( and family )is absolutely the kind of guy to do business with, AND have as a good friend.

[@cyberhornthedragon]

that bike is a classic heck as a kid i had one with a slick rear tire three speed an small 15in front wheel candy apple blue big banna seat with sissy bar an loads of chrome

[@mslorry3420]

I know the dozer service has been completed and it has left the garage. For when a tight fit happens again cut the trim board on the big door up around 4' and cut it off. Gently remove and repeat to other side. That will gain you ruffly 2" in width. Replace trim board with screws for future use.

[@randytravis3998]

in the town I live the village barns ,, the shop where they fix there trucks for road work and plowing ,, with the snow plows on could not fit the truck in .. they cut a notch in the wall .. they remove that chunk when they need to pull a truck in with a plow .. would have looked better if they just put a 2 foot wider door up instead ,,

[@sassafrasvalley1939]

@@randytravis3998 small town budgets… small town fixes… when I was a kid in the late ‘50s… the town bought a home made, water filled, roller from a councilman’s welding shop. They pulled it down the unpaved roads before they oiled them… to keep the dust down. (The oil came from the mayor’s brothers service station. It was from his oil change sump.) Come winter, the roller froze. The welder councilman, who had sold it to the city, offered to repair it for standard shop rates. The Mayor and a couple of other councilmen objected. They finally approved three motions: 1. The welder councilman could do the repair, but at a discounted rate. 2. He must refill it with antifreeze mix to prevent recurrence. 3. The antifreeze mix was to be purchased from the Mayor’s brothers service station! When my dad told this story, he always added… “Town business was almost as in-bred as the population!”

[@leer-winnobbeefarms2131]

Great video! And, proof of why I hate Dozer Grease Fittings! For my Case 450B, most of the time if I take the fitting out and clean out the fitting well with a small screw driver, then fill the well with penetrating fluid, the fitting will take grease. If it doesn't I'll move that part of the blade, or whatever, and generally it will take grease. Only about 1 out of 10 times is the fitting itself defective. When all else fails - get out the fire wrench! Thanks, Mike and Aaron!

[@BubbasDad]

Have friends with the same garage door problems. Not wide enough. They had two 12 ft doors side by side. Couldn't turn the new Motor Home into the garage. Ended up removing both garage doors and installing a 25 ft wide door. Everything fits now.

[@Craigd68]

Hope Todd brings some of those awesome led lights for the 850J it would look awesome with 2 on the front and 2 on the back and maybe one in the center on the front then it will be lit up all the way around and maybe a set of limb risers from C&C Equipment.

[@dalebarnes3602]

Aaron's Antics Are Very Similar To Mine At Work. Every Workplace Needs A Man Behind The Scenes!

[@laurelrowe5536]

I am glad to see MBTS back, love your interaction.

[@garymurt9112]

I think it's time for a shop update, new door in the end of the shop wider to accommodate your dozers and your new haul truck plus the new excavator you'll be buying next year.

[@DirtPerfect]

Very happy with what i got thanks

[@garymurt9112]

@@DirtPerfect didn't you say something like this with the first 850J.

[@chrishelms1967]

This open heart surgery was way more fun than my actual one...... also first time I've laughed while thinking about a bypass machine....thanks for that👍😁👍

[@warrenmichael918]

Seeing that big ol rig squeeze through the door and barely fit reminds me of the night i tried to carry the MRS. through our front door the night we got married!! LOL She had more squish to her so we made it work but if she woulda had just 1 more piece of wedding cake, we were gonna be in a bind!!! LOL

[@jimmymckay73]

Seeing you inch that sucker in reminded me of an incident that happened many many years ago back in the late 90's when i delivered equipment to DIYer's from a rental store . I delivered a 450J to fella and that dozer was equipped with the decelerator pedal . I was always very thorough on my warning about that pedal to renters but things being what they are , Murphys law and all "stuff" happens . Long story short i came back three days later to pick up said machine and the fella had removed a large portion of his garage . I had always thought that was a horrible machine choice for a rental store just for that reason alone . It still makes me chuckle today when i think about it .

[@jogge1980]

MBTS back in the dirt cave... awesome project...you two together seems like happy shop time... a lot of work with a smile...thumbs up 👍

[@DirtPerfect]

Thanks 👍

[@SpringdaleJim]

tell yer buddy, I had a Schwinn StingRay 5 Speed bike with a Banana seat, and a Sissy bar on the back of the seat and High Rise handle bars back when i was a kid in 1972

[@benjimcwaters7216]

Mike, I really enjoy your channel and watch most videos as soon as they post. I have a request or recommendation for a future video that I am hopeful you will consider. There are tons of dozier videos on KZbin that show doziers pushing and ripping but not any that I have found that go into detail on what the operator is actually watching and paying attention to as they are moving dirt. This is especially true when grading with a dozier like your D4. I'm not an operator myself but I have had occasion to make a mess with a piece of heavy equipment. Perhaps a video with you describing the intricacies of the proper way to load the blade, carry the load, and what the operator is looking for when distributing the load on a grading project. There has to be some do's and don'ts that have to be observed when ripping hard material like you guys had on the water line project. I have always enjoyed watching true professionals working at their craft and I feel this is true for most people. Other wise how can we explain why Bob Ross was so popular with his painting videos. That gives me an idea for a new moniker for Jerry, "The Bob Ross of dozier operators." I can just about hear Jerry saying, "We have all the happy little piles of dirt." Maybe not???

[@DirtPerfect]

Thanks will see what I can do

[@thebear5454]

I heard a rumor through the grapevine that C&C trailer service went out of business after this repair. 😂😂 Clint did an awesome job.

[@allensharlow7763]

Have better day tomorrow guys 👌👌👌🙏🙏🙏🙏

[@johnmorgan5377]

I just love watching you boys work but have fun while you do anything watch out for HR

[@sassafrasvalley1939]

Mikey, your surgical assistant/ cameraman sure earned his pay. I mean had he not nudged that bolt down the grill… Had he not guided you through the door… had he not handed you the fan in the right direction… had he not primed your paint pen… had he not pumped that grease… Mikey… what did you actually do in this video?

[@daverobertson3519]

😊😊Love it when Aaron in shop with you.

[@robertnorris1808]

When you said you didn't see any major leaks hopefully you didn't see any leaks at all. Also, that dozer seems to be fairly easy to access places that would really make working on them a whole lot easier and less of a knuckle buster.

[@gastonpruneaud8830]

Bonjour, ça fait plaisir de voir une équipe dynamique , par contre il va falloir agrandir la porte avant qu'il y ai des dégats , il y a toujours à faire sur les engins , bon courage à toute l 'équipe , petit coucou de France

[@terryrogers1025]

I don’t envy you on getting those pins greased, I’ve been there and have at times ended up cutting the pins out to fix the problem. Good luck sir.

[@johnmattu7262]

Bout had a nervous break down before the grill got shut, I had the solder and paste out ready to fix a tube. Your tri-pod was slack'in on ya.

[@KB-gs8zi]

Hey Mike !! Just because you got another Off road Dump truck ,, LT. Dan still needs to be done !! Have a good week & Thanks for the video !!

[@davidnichols1363]

The corner cutting edges on the blade would be easier to take off than replacing the door trim. In my opinion.

[@ckilo11]

I agree

[@garymurt9112]

You've obviously never removed cutting edges on equipment, when it comes time to replace cutting edges the bolts are most of the time with a cutting torch or air arc gouging. Dirt gets packed in the threads and the nuts get rounded off.

[@stevenr8606]

Yes we HAVE been waiting patiently for Lt.Dan, it is almost MARCH 2022

[@ronaldjennings8057]

If you got any tighter than that you guys about as close as a horseshoe and a hangar nade but you done a good job getting it in there I like that when you showed about the fan twice as pretty cool👍 oh by the way thanks for showing us the pump twice that was good by the way it's yeah it's kind of hard to unscrew those lines when you got oil all over your hands done a good job get most of it done have a great day my friend thumbs-up good video and God bless🙏👍👍👍👍👍👍

[@eaglerider1826]

Mike , I expected to see you mount the cover plate that Clint made you for the hole where the tool box was .

[@davidlane9525]

At least you know the belly pan will not rust at all and you was rite it was ab 3 months ago when I seen the lowboy getting fixed lol and I thank it will look good with wider tracks on it and mabey it will float on the mud instead of cutting down in to it great video and good game of plinko it is a fun game keep the great content keep them coming 👍

[@Bryanja81]

Mike, have you tried a grease joint rejuvenator for those grease fittings that won’t take grease? It forces penetrating oil into the joint to clear out whatever is blocking it from taking grease. I bought one to try and to my surprise, it worked very well!

[@warrenmichael918]

Those things work really well... You are talking about the long looking pen thing filled with the penetrating fluid that you put on the fitting and smack with a hammer , right?

[@Bryanja81]

@@warrenmichael918 yes sir! That’s the one!

[@DirtPerfect]

Yup stay tuned

[@Bryanja81]

@@DirtPerfect 👍🏻

[@joshandicoechea6770]

Great video for those grease fittings you should buy the grease joint rejuvenator tool it’s been working for me you put oil in it and you smack it with a rubber mallet and 80% of the time it’s been working for me. You can get them off Amazon or most of your equipment sales places have them in their show room. like I said just put any kind of oil in it put it on there and smacking it sprays down with high pressure and normally cleans them out it’s been working for me really good good luck thanks for the video!!!!

[@DirtPerfect]

Will not work on this stay tinned will see why

[@wrecks02]

You two making a mess in the workshop is more entertaining than most 'comedies'... And maybe MBTS can make himself useful modificating the door to get the bigger toys in without demolishing the whole house? Keep the vids coming!!!!!

[@Drew6709]

Mike, looks like a bigger door is in the future. Or a shop expansion with a wider door.

[@willardnicholson8026]

I enjoy watching you two work together great video 👍

[@DirtPerfect]

Thanks

[@HalfCutGarage]

She's definitely tight!!!! Shop expansion in the future!

[@CMDSR]

Great video with deja vu moment around 20:40 mark in this one.

[@malcolmbooth7241]

clint always does a fantastic job mike

[@chuckbold3888]

Heart perfect & man behind the transplant

[@jackmiles4443]

Yep, I'd believe it.. that you two were keeping each other awake.. not just MBTS keeping you awake Mike.

[@BossmanEight]

You & MBTS drove right past my house and didn't even stop for coffee! I see how things are ..

[@blackdogexcavator21]

I don't know if you ever played the video game Tetris or not but, you would have been good at it. Getting that dozer through the door was quite the feat and wiggling Lt. Dan in and out is nothing short of a work of art. Lol. You boys stay safe.

[@Damoinion]

The fan blade direction was one of the most common causes of overheating on the old BMC/Austin/Morris Mini. Most people, including mechanics didn't realise that they blew out through radiator, not in. I have seen the same error of fitting happen on a few other machines as well, including some stationary engines.

[@Crewsy]

The irony is that if he installed the fan backwards it would still blow out. Flip it around and the angles stay the same but it likely won’t flow as well since in normal use running in reverse is only to clean the rad from dust buildup.

[@Damoinion]

@@Crewsy Yep, they will still blow the same way but the actual flow efficiency is where it goes wrong when the blades are backwards. Kind of like putting the blades upside-down on a helo. The pressure differential just does not work right.

[@Crewsy]

@@Damoinion That’s what I said. 🤦‍♂️ The normal operation of the fan on the 850J blows out the front drawing air across the rad but it can through a setting reverse the direction to blow back in towards the rad the clear dust and debris but due to the shape of the blades it’s not as efficient hence as I said if the fan was installed backwards it would still blow forward but not as efficiently. The Austin Mini was odd more because the rad wasn’t in the grille since it was essentially in the fender so it didn’t benefit from airflow while driving.

[@michaelcarlson1528]

Mike, take out that center column, put a steel beam across both doors as a header and put in a custom garage door. I don’t know the size of your two single garage doors. But, get rid of those single doors and put in a 18 foot door or 20 foot door. Or whatever size door. I built my house and I put in a 18 foot garage door instead of the traditional 16 foot door. I know you know what I am talking about. Just a thought sir!

[@brandonrawleigh9404]

Cnc did a great job on the trailer rebuild

[@morgansword]

No wonder MBTS is so happy, he is in a world of his own. Its something common with union men.. they just don't get excited till a beer truck tips over/LOL I too hope to watch Lt.Dan come together

[@richied6319]

Looks like you might need to build an extra garage with a much wider doorway just for the new dozer, "and" lengthen it for your newly-bought trailer for winter repairs on the other side of the basket ball wall.

[@glynngrauer3962]

Mike like you said lt Dan is a hobby and you want it done right the first time not the last time and that dozer is a really tight fit there Mike

[@gavenrager304]

Hi Mike I really recommend you getting limb risers for the 850j not only would it look sweet but it protects the exhaust pipe and top panels from getting smashed up

[@rudyfisher7660]

We're all gonna dream fix it

[@sparkyplugclean2402]

Ran a 850j or soish for a while, my only problem was the blade bracket design didn't flow through rock nearly as well as the d8h I'd run previously. Got pushing a great big pile of pit run, and pulled up my blade at the end to hear a great crunch. I'd pulled a boulder into the grill and fan, It had perched on the blade frame after coming over the blade.

[@jameslindley924]

Take out the Grease fitting and Drill out the old hard grease works sometimes and or apply heat to the old hard grease to soften it up

[@DirtPerfect]

Will. It work plz what other videos thanks

[@tomwainwright7102]

One crazy duo!!! just my cup of tea (as we say over here,means I like it)

[@Lapeerphoto]

20:35 DeJaVu - LOL "So well done, we showed it twice."

[@brucebonkowski7253]

Hey Dr DP the brackets were slotted you could have put in bottom bolts and you put it down then attach to the dozer and put in top bolts and always Chill 🥶the hydraulic pump next to your Pepsi on ice less Hydraulic Leaking

[@dljones61]

I know this is old news but spraying those pins down with some PB Blaster can only help. When I get stuck working on customers farm equipment I always start a day or so early spraying down those kind of spots. Course I always keep a big sledge hammer handy also 🤣

[@6582rg]

Looks like a Schwinn Stingray MBTS. That’s what was popular in the 60/70s when I was a kid. You could lean back and ride wheelies for days. Used it for my paper routes too. Kids don’t have any idea what I’m talking about. How about steel skateboard wheels? Had those until about 76.

[@koldsteele]

As a kid all i wanted was a Schwinn Lemon Peeler or an Apple Crate those bikes were the stuff..

[@jerrystott7780]

I built and sold skateboards in 74-75 to pay for my own boards, and you could get urethane wheels and buy sealed roller bearings back then, but the bearings were from electric motor suppliers until they became common. The hot setup was a set of tracker trucks with the urethane wheels and sealed bearings. Have a great day.

[@stereolababy]

thats some strong concrete

[@leonardbartley5670]

That was impressive bringing the doze in Guess you've had a little experience.

[@bennyhilliard7411]

I understand perfectly !

[@andysukosd8177]

Great video guys, Sorry, but I have got to side with MBTS hose repair and bike repair, My heat also connects to propane. He sure does have an old bike ! But , I did enjoy the whole repair on the dozer. Thank you guy's.

[@johnie9497]

DP, you need a bigger shop bud. Love the channel you, C&C and LetsDig are like a comedy show

[@waverly7681]

You are the big winner at Plinko!! Lol

[@scottdrenske830]

Thumbs up to the skilled driver going threw that door.

[@dansevern3291]

Crazy ideas? Just getting that beast into the shop was a crazy idea. Heck, I was stressed out just watching it, and I knew it was in there from other pictures! Thanks for the morning chuckle (or two.)

[@Mcgiever100]

Didn't know a snow plow had so many grease fittings.😀

[@stephenhunter70]

My answer it, it's time for a bigger workshop, with a wider door! Time travel exists on this channel and clints!

[@bourbonthebiscuit]

Don't ever let captain kleeman bring that dozer into the workshop never mind loosing mirrors im sure you will loose one side of the door frame or wall no problems 😊 😉 😂😂 trailer looks awesome I watched repairs on c&c equipment channel was rough but they done a great job looks awesome 👍👍

[@gilesjordan8545]

you could try a shop vac on the tank may stop oil running out

[@DirtPerfect]

Stay tuned

[@tomswindler64]

Good video as always,at least you make working on the dozer enjoyable with your antics.keep it up and keep doing what y’all doing.👍👍👍😎😎😎

[@edsecorr7812]

You did it great job keep up the good work love your videos thank you

[@stephenjohnson1561]

you can get your doors adjustable tony fast can tell you about that

[@philipsavickas4860]

was working at a place we made a machine that engineering did not consider the fact we had to ship to the customer the day of shiping found the door was 18 inches to small was a rush to get 14" x 14" door put in as soon as possible

[@davidpritch718]

I saw C&C do the repairs on their channel...great video.

[@billbarnes1043]

Put your shop vac hose on the hydraulic tank and you will not loose any oil

[@Crewsy]

Oh boy. A "top secret project". I can't wait to find out what it is. 😉 6 hour round trip to Nashville Indiana? You must have gotten lost because Clint didn't take that long with Kevin when they came to Derby to install the ripper. 🤣😂

[@DirtPerfect]

lol side tracked

[@Losttoanyreason]

Cool Aaron! An old stingray bike!😍🥰. Already saw C&C's video on repairing your trailer DP. That trailer was a disaster waiting to happen😬😱. So you get on Aaron for playing with his hose and here you are playing Plinko with a bolt, LOL.

[@kevinfrerichs8589]

Seen Clint at C &C fix up the trailer, BUT officer Hoover should have taken that thing (your lowboy) out of service the day he seen it. Looks like Clint did a good job fixing it.

[@warrenmichael918]

HaHa, unfortunately as rough as you think DPs trailer was, there are many many more trailers on the roads that are about to fall apart!! This wasnt really as bad as they made it seem. Yes, it needed the repairs badly but other then the u bolts about to fail, the rest was just needing maintained and fixed up.

[@1231skip]

Look up “Lock and Lube” grease buster for grease fittings that don’t take grease

[@DirtPerfect]

Have one

[@glennwolfe1663]

DP, one of things I enjoy about your videos is it's Comedy Central😁😸👍👍👍👍👍😸🤗🐺

[@heatherlane9270]

Watching access to small areas eg fan, and thinking is there anything such as a flexible long lamp to reach all corners also the same type to attachment for such things as a camera/go-pro. Hands free that is. Fun video 'Doctor Perfect'.

[@leeshaver7825]

Listing to you talk about LT Dan is like listing to Brandons SOTU speech 😆😆😆

[@csippel1]

Keep warm aron

[@csippel1]

Saw the lowboy fixed before you took it to c&c

[@ghostwriter1016]

🤣🤣🤣 Already saw the can of worms on Clint's channel. 🤣🤣🤣

[@rockyjustus2829]

It's hard to keep up lol with the video drops on the 30" pads replacements I guess the " top secret " lol project that's coming is part of it , anyway DP as always it's good to see a new video always looking forward to it and as always good to see mbts , y'all make a good team as well as friends, keep up the good work ✌️ later guys n b careful

[@thomasleonard1846]

Heat the grease fittings!