Revell: 1970 Dodge Charger from The Fast and The Furious Part 3

[@kevinvankoeveringe5672]

Gewoon om je te pesten 1-5-3-6-2-4 ontstekings volgorde........... 😈 geintje! Ziet er weer geweldig uit 👍

[@kevinvankoeveringe5672]

1-8-4-3-5-6-7-2 voor de opletters

[@19mct80]

je bent erg meneer koeveringe

[@MikeCindyWhite]

Awesome brother!, I noticed your using a lower p.s.i.? Whats the reason bud? Just read your description... Smaller needle. Very cool of you to put all those links in there! Thanks.......

[@MikeCindyWhite]

Nice!

[@IgnazKevenaar]

The chrome effect is insane! Just started out with modeling. Looking forward to once become as skilled as you (Bedankt voor alle tips!)

[@kylesagun156]

Ignaz Kevenaar I'd say that chrome effect is more subtle than kit chrome, kit chrome was never right, that's why so many people strip the chrome just to spray chrome over it

[@IgnazKevenaar]

Absolutely! That's why I like it so much. It has the deep, dark, thin, almost aggressive appearance. Not the blotchy plastic kit chrome. Absolutely beautiful.

[@shawng7902]

After almost dying from an over cleaner event yrs ago I wont use it. Ive found gel bleach is my new best friend. It will strip chrome and leave a super shiney pc after. Im so surprised how much detail is copied then lost when they chrome parts. Just normal laundry bleach works great. I use the no spash thick bleach anyway.

[@truefilm1556]

Outstanding work as always! Love how all the attention to detail and paint methods smoothly come together in the end = just awesome! Thanks for sharing your knowledge and skills!

[@kylesagun156]

truefilm yeah he's amazing

[@boxbuyer2008]

I don't know why I keep getting the sandpaper finish when I airbrush tamiya primer/filler

[@TheScalemodelingChannel]

+boxbuyer2008 what grit do you use?

[@boxbuyer2008]

The Scalemodeling Channel I was getting a rough coat from the airbrush. Turns out I was spraying in an enclosed area..the paint would dry and land on my project.

[@boxbuyer2008]

The Scalemodeling Channel to answer your question. I use 2 to 3 thousand grit to smooth.

[@feldon27]

Too much thinner or spraying too far will give you the rough finish.

[@PanzergrauModels]

Outstanding detail, Tom! Keep them coming, please! I agree with you: it doesn't need to BE right, it has to LOOK right. Cheers!

[@kylesagun156]

Panzergrau Models always had great amazing detail

[@McNeive1000]

Did you de-crome the fan blade then use alclad 2 crome like you did on the headers?

[@TheScalemodelingChannel]

+Michael McNeive yes

[@ianwhite4914]

fireing order on all moprasr is 18436572big block wires counterclock wise

[@19Dejo81]

Tom,how big in diameter is those wires for engine,0.14mm or smaller?thnx

[@TheScalemodelingChannel]

Honestly have no idea. Does not say what size it is on the package

[@McNeive1000]

What color did you paint the valve covers and the distributor ?

[@TheScalemodelingChannel]

+Michael McNeive alclad polished aluminium i think. The dustributor is unpainted metal

[@McNeive1000]

Is it the distributor that came with the kit?

[@TheScalemodelingChannel]

Michael McNeive aftermarket from scaleproduction.de

[@klm20079]

what size drill did you use for the egine cable?

[@aaronkulikov1158]

For painting and glueing do you use a painting mask pls reply

[@TheScalemodelingChannel]

Aaron Kulikov for painting with my airbrush i use a respirator, yes

[@kylesagun156]

Wow I want to try to where an engine now... maybe my 2jz 😏😏 also great vid

[@kylesagun156]

Wire*

[@marcosfernandeznanita7150]

Hey Kyle, you can try, always is amazing so new things, especially in our hobby...

[@marcosfernandeznanita7150]

Hey Kyle, you can try, always is amazing so new things, especially in our hobby...

[@marcosfernandeznanita7150]

Hey Kyle, you can try, always is amazing so new things, especially in our hobby...

[@ryzenenjoyer2824]

so i have some wire from old headphones, its like sewing wire, would that look ok as spark plug wires?

[@pturley84]

Looks great! Looking forward to seeing this one completed

[@kylesagun156]

Paul Turley me too :)

[@BennyCFD]

Outstanding video as always I going to start using Alclad II paints, and I was wondering what do you use to clean your airbrush with after using the Alclad. Thanks

[@TheScalemodelingChannel]

alclad or zero paints airbrush cleaner

[@__AverageJoe]

Hi The Scalemodeling Channel , I just wanted to say I'm a huge fan of your work, and suggested to show the underside of the car when you are done, and showcasing it , as always, great vid , and have a good day:)

[@McNeive1000]

I was also wondering about the Alclad Klear Kote. A lot of people on KZbin say that it will dull the chrome finish down slightly. They say that it is better to use it on larger surface areas to protect the paint. My question is, should I bother using it on smaller engine parts like the header? They look great the way they are, but I haven't used any klear kote. Thx, Mac

[@TheScalemodelingChannel]

Michael McNeive if it is a part that you will be touching a lot during the build. Clear it. If not. Don't bother. Though it doesnt hurt

[@acatala1010]

Where did you get the wire from?

[@TheScalemodelingChannel]

scaleproduction

[@pierrededinard1957]

Nice job Tom, as usual !... Two questions : you no longer use your 0.4 mm needle ? You can spray Alclad Chrome either with Acrylic Gloss Black ou Enamel Gloss Black ?

[@TheScalemodelingChannel]

I do still use a 0,4 mm needle. For primer and clear. For color i now use a 0,2. Mainly becouse i have a new airbrush and also got a fresh new needle with it. My old one was bent a bit and did not spray very well anymore. Acrylic should be ok, asl long as it is actual acrylic and not an acrylic enamel mix, my advice would be to use an alclad base to be safe.

[@McNeive1000]

Good afternoon Scale modeler, I just received my distributor from Scale Production and I drilled a small hole so the distributor will sit in place better and all looks good. So now I'm looking at the coil and thinking what a pain in the butt it's going to be to run a wire to that little thing! So my question is, did you bother to run a wire to your coil or did you just let it go? It's hard to tell by just watching the video. And if you did do it, how did you do it? Did you drill a small hole in the coil? Thx, Mac

[@TheScalemodelingChannel]

+Michael McNeive i did not do it. However if you would. I would like you say just drill a small hole in it and glue it in

[@jeremy2033]

I wire all of my engines, but like you said some nuts out here will literally google the firing order! Keep up the awesome building guy!

[@davidbest53]

When painting a body 2 different colours how long should I wait for the first colour to dry before masking up for the second colour.Great videos learning such a lot !!

[@TheScalemodelingChannel]

David Best that all depends on the paint you use and how warm it is. With zero paints in a couple hours. Other brands advice 24 hours. I would read the label for drying times

[@marcosfernandeznanita7150]

Nice job on the distributor my friend, great video...

[@kylesagun156]

Marcos Fernandez Nanita very great vid

[@marcosfernandeznanita7150]

Well Kyle, for a almost out of the box build, looks amazing 😉, I ask him ones to do some wiring on his builds, time to pay of, and he did a great job on that, you have to see some extreme build and you'll see what I mean, I like his job, that why I'm still watching his videos, very helpful when I start on the hobby, thanks for the comment bro...keep up the great work... this is an awesome community...

[@kylesagun156]

Marcos Fernandez Nanita yeah I'm multiple fb groups with amazing builders, it's hard to try to post anything people like..

[@marcosfernandeznanita7150]

Hey I'm only have a year in the hobby, and a lot people like my build, and the things I don't do it right the comment constructively good, and that's how I learn to do some things men...

[@kylesagun156]

Marcos Fernandez Nanita I've only been in for a year too

[@McNeive1000]

Good day Scale modeler, I was just wondering if there is a particular Bob Smith glue that you would recommend when gluing painted parts to painted parts? Thx, Mac

[@TheScalemodelingChannel]

Michael McNeive maxi cure

[@derekstechmann6610]

what air pressure do you use on your airbrush? love the channel. thanks , Derek

[@TheScalemodelingChannel]

Derek Stechmann its all shown in the video and linked in the description

[@derekstechmann6610]

thanks...new to KZbin

[@petermurray7556]

worn tires? great idea! maybe the burnout idea isn't a bad suggestion?

[@zacharyabsher9531]

Nice dude I was just wondering if you ever done trucks or jeeps

[@McNeive1000]

How deep do you recommend drilling the holes in the distributor? Thx,Mac

[@TheScalemodelingChannel]

+Michael McNeive deep enough to where the wire can be glued in

[@TrueNorthModels]

Very cool. Cheers

[@kylesagun156]

Wayne Osborne it is very cool

[@dishchicken]

Have you done an AMT 1968 Shelby before?

[@Wesley_C]

That engine details looked so amazing.

[@g00n96]

do you use canopy glue for the glass

[@TheScalemodelingChannel]

no, bob smith industries super gold +

[@sameer745100]

you did more detail then i do when i do plug wires i just do one hole in the distributor

[@ianwhite4914]

if you want to remove crome use super clean its grat it takes of crome and paint and it bio degradeable

[@bigeddie1231]

very sweet looking sir

[@marcosfernandeznanita7150]

Yeuuuuup...

[@stevewatts3502]

I must admit I was shocked when I got a Scale Production distributor... That it was white metal!!... decided I'm gonna save it for a "good" build, (lol, which'll probaby be never.)

[@kylesagun156]

Steve Watts same lol, I might get one

[@kylesagun156]

Thought you didn't like the sanding the tires thing? Jk I understand lol.

[@veitplumecke7019]

can be the next project the revell trabant grüße aus Deutschland

[@Zockm]

what breathing protection are you using for Zero Paints?

[@acatala1010]

Matze MC ^^^^^^^^^

[@TheScalemodelingChannel]

a 3m respirator and the spray booth

[@nancymerryman2324]

6:35

[@TheScalemodelingChannel]

?

[@nancymerryman2324]

It a marker

[@ianwhite4914]

love the charger vid and the firing order for a hemi is 18436572 counter clock wise keep up the great vids

[@shawng7902]

1-8-4-3-6-5-7-2. Cant ever go wrong with it lol