Satin Bronze Torched Scotty Cameron Putter!!

Please check out my other channel! Will be all NON golf related content!
/ @itry9066
Please Like, Subscribe and Share these videos! It helps tremendously, and allows me to keep creating content! And also let me know what other type of content you would like to see! I'm up for any suggestions.
Trying out some different finishes. I decided to give this one a satin torch finish in a dark bronze. I went with a bead blast finish prior to torching, and then, bead blasted again to make the colors and fading more subtle. I think it turned out great! The video and pics do NOT do this justice. It has a very subtle pearlescent gleam to it with blues and purples that the camera just doesn't pick up. Also has a nice fade from dark bronze to gold, and light silver up to the hosel.
THIS PUTTER HAS SOLD!
Video also available on Rumble! rumble.com/v24...
[e-mail]
Instagram iGolf906
A list of my tools and materials used.
Items may vary depending on stock and/or model
This is just a rough idea of all that is used. Feel free to purchase through these links to help me out with these videos! Thanks!
Grinder amzn.to/3WYFbXm
Convolute Wheels:
(Recommended Branded Wheels) amzn.to/3Er5E8R
Best wheels for the price!!!!
amzn.to/3B7xipd
Polishing Erasers amzn.to/3uxkIMv
amzn.to/3Y8w0EA
amzn.to/3UGxbrU
Sand Blast Cabinet amzn.to/3TwiXct
Blast Media:
Coarse (for finish blasting) amzn.to/3g3L2Kj
Fine (for satin finishing) amzn.to/3tmg6Im
#120 for cerakote prep amzn.to/3g3L2Kj
Acetone (a must have cleaner and degreaser in my shop) amzn.to/3tn9tW7
Testors Paint amzn.to/3TwV6JI
amzn.to/3TyacP3
Tamiya Translucent (Scotty Colors)
Red amzn.to/3hFXZe4
Blue amzn.to/3NYJv4M
Green amzn.to/3tmH1UD
Torch Supplies for Finishing
Gas amzn.to/3Gkm580
Torch Head
amzn.to/3PV9ZFB
amzn.to/3C4b1Jr

[@igolf906]

I will be posting my 1000 subscriber giveaway video soon! Putters, golf balls and more!!!

[@GrantHen]

@igolf906 Very nice. I'm curious, did the putter lose any weight from grinding and blasting?

[@igolf906]

Most restores average around a 3 to 5 gram loss.

[@GrantHen]

Thank You! I am going to try this for myself after seeing your video's. @@igolf906

[@termite122]

new subscriber.. i think im gonna reach out to you and discuss sending my scotty to you..thnx

[@jefferyzielke7665]

Dam. That putter is amazing.

[@igolf906]

Thanks! Tried a little twist on the typical torched putter by bead blasting it before and after. Will be trying some new finishes like this one in the near future!

[@NoCapGolf]

@igolf906 could I pay you to do something like this to my Newport 2?

[@igolf906]

Shoot me an email.

[@thefartmasterfl3x129]

If I send you my scotty Cameron could you do the same for mind

[@igolf906]

Shoot me an email

[@Stealth_Overlanding]

What media,grit,and psi did you use?

[@igolf906]

240 grit glass at 50-60

[@texasspangler]

Looks great simple finishes come out pretty awesome when done right.

[@igolf906]

Thanks! Trying out new finishes so I have more options to offer in the future!

[@texasspangler]

@@igolf906 definitely looks good!!!

[@joeyanderson6382]

What grit and type of demurring wheel do you use?

[@igolf906]

Check any of my newer videos descriptions. All my up to date equipment is listed. 240g is common.

[@joeyanderson6382]

@@igolf906 thanks so much. You’ve inspired me to build my own small shop.

[@tomworboys4038]

Looks dope. How did you actually achieve the bronze colour?

[@shmirginhymer1867]

Did you watch the video?

[@tomworboys4038]

😂 yeah. Multiple times. Didn’t realise it could be done from just heat. You got it a very uinform colour all round. Favourite finish I seen yet

[@shmirginhymer1867]

@tomworboys4038 it's not my video but yea. He just torched it.

[@mangelo635]

Awesome job fantastic end result 👍🖼🔥

[@nunyo7259]

How much to black out (no fill) evnroll er2v midblade?

[@igolf906]

Depends on the condition of the putter. Feel free to email me.

[@NYGOLD]

I've been binge watching your videos, they are addicting.

[@igolf906]

Thank you! Hoping to improve on my content this year so stay tuned!

[@jerryneff6018]

Again, awesome transformation of an awesome putter.

[@TheFoz1983]

What grit beads do you use? Could you do a hot black oxide finish video please that would be interesting to see

[@igolf906]

For this finish I use a 240 grit glass bead. And I plan to do a classic style oil can finish in the near future. Similar process, but I will look into the hot oxide!. So far I've only done cold bluing/oxide finishes.

[@Doinitwell007]

After heating is it cooled at room temperature? And does the heating affect the hit or performance of the putter at all?

[@igolf906]

After baking, it's cooled just enough to handle. So then I blast it, and most of the time it's still warm when I torch it. And no, it doesn't affect the feel. If I were to torch it and then quench it in oil or water, it might change the make up a bit.

[@kenmykietowich3625]

Nice work, very elegant!

[@dustinh806]

How do you come up with all these Scotty’s? Restore them for others or are they your collection? These are amazing!

[@igolf906]

I purchase them online, or trade for some. Most in pretty bad condition as you can tell. Some I keep, most of them I sell. I usually sell them for a very fair price also so, I don't really make much money on them, as long as I can make a video and try out some new finishes. 🙂

[@johnsheerin2130]

What did you use for blast media here? Awesome work!

[@igolf906]

It's 240 grit glass bead. It has to be blasted at low psi, 50 to 60. And the finish prior, has to be near perfect but, looks nice.

[@joehenderson5079]

Did the putter continue to darken after the last bead blast or is it a trick of the lighting?

[@igolf906]

The color in the video at the end is the actual color. It actually got slightly lighter after the light bead blast. The thumbnail depicts an automated enhancement so changed the color slightly for more vibrance.

[@kall3467]

That looks killer, this video just gave me inspiration to have mine done this way. I'm curious, what do you charge for something like this? Another question would be if a single 8lb box of media you linked to would be enough to run in a small blast cabinet?

[@igolf906]

Absolutely. I have purchased multiple different types of media. Some are 10lbs. Some are 8lbs. And usually I only dump half the box in at a time. No need for all of it UNLESS youre only using that one kind. I only use a bit so it's easier to clean out when I change medias. Also keeps contamination at a minimum. Email me anytime at [e-mail] for any other questions.

[@terryfehr9698]

What buffing wheel did you use??

[@igolf906]

It's a convolute deburring wheel. Check my video description for all the tools I use

[@heimdalth]

What kind of black liquid is used for the text?

[@igolf906]

It's Testors Enamel paint

[@brandonowens888]

That finish was awesome! Probably my favorite that I've seen on your channel.

[@igolf906]

Thank you!

[@callumreidford6514]

What paint do you use for the infill?

[@igolf906]

Testors Enamel. If I'm doing translucents like the factory colors, I use Tamiya.

[@olliebroadbent567]

What did you put in the dots to make the paint run

[@igolf906]

Isopropyl alcohol. A trick I learned a little while back to make the paint not only flow better, especially in the dots, but it keeps it bubble free and glossy! Takes a little practice because you don't want too much alcohol in there otherwise the paint will just float. Just a thin film of it.

[@elig4056]

Beautiful work

[@igolf906]

Thank you.

[@kramerdesignco]

That bronze looks awesome.

[@igolf906]

Thank you!

[@barrymcnulty]

Do you have a shop on ebay?

[@igolf906]

No I don't. The putters I do are sold pretty much immediately after I restore them. If you're looking for something in particular shoot me an email and we can figure something out

[@vincemartin8875]

Great work! I can't wait to game this beauty.

[@igolf906]

Thanks a lot!

[@beveridge1313]

i like that color alot! very nice job!

[@igolf906]

Thanks. And the camera barely does it ANY justice.

[@rockitman7276]

Absolutely beautiful job⛳️

[@igolf906]

Thank you!

[@jasonmayala7315]

What paint do you use for the paintfill?? It looks like some version of testors, I wanna do something to my putter and wanna make sure I get the right one 😅

[@igolf906]

It is just the standard enamel Testors you get at any hobby store. I use Tamiya if I'm looking for a translucent color.

[@jasonmayala7315]

@@igolf906 thanks for the timely response! Ya I’m gonna hideki out a new Scotty Newport I think. Black (don’t think translucent would matter) fill on the dots covering the center silver, and red on the flange line. That part might be translucent so thanks for that specification!

[@igolf906]

@@jasonmayala7315 Nice! My studio select video from about 4 months ago is sort of designed like one of Hidekis putters. Totally unintentional but, very nice looking!

[@michaelhennig6303]

Would torching a carbon putter prevent it from rusting?

[@igolf906]

Torching and oil quenching is a good rust prohibitor on carbon. It will rust over time though, if not taken care of and oiled occasionally.

[@michaelhennig6303]

@@igolf906 would oil quenching affect the satin bronze color at all. This putter is probably my favorite of all your posts. Thanks for the great content.

[@igolf906]

@@michaelhennig6303 Well you originally mentioned a carbon putter. This putter is stainless. When torching you will get completely different colors with the different steels. So oil quenching stainless steel wouldn't really benefit it at all, and I'm not entirely sure what would happen to the color.

[@JoshMG]

It’s glorious!

[@igolf906]

Thank you!

[@Tomdabomb86]

Beautiful

[@igolf906]

Thank you!

[@oscarurdiales2262]

Is this putter still available and are you willing to swap for another Scotty of just sell ?

[@igolf906]

It is not sorry. Sold as soon as I posted.

[@oscarurdiales2262]

Can you restore my Santa Fe tel3 in this same finish ?

[@igolf906]

@@oscarurdiales2262 Email me at [e-mail]

[@brokenbaggolf]

Is this putter still available if so i want it

[@igolf906]

No sorry. Sold within an hour of posting the video.

[@brokenbaggolf]

@@igolf906 i want one like that in a 34inch if your able to i will send a deposit or pay upfront just let me know

[@igolf906]

@@brokenbaggolf Do you have one for refinishing? Or you looking for me to find one and finish it for you? Email me at [e-mail] we can talk details if interested

[@brokenbaggolf]

@@igolf906 hey tried reaching out to you with your email but says invalid address. My email is [e-mail] shoot me a email and yes i would need you to get the putter and refurbish as well.

[@jimadams5279]

Nice job, do you put any kind of sealer on it? Have you ever tried a black oxide finish on a older Newport 2? Great work really.

[@igolf906]

No sealer on these type finishes. So they will wear as normal putters do. Cerakote makes a clear coat essentially I may try out in the future but usually isn't a very requested finish. Also, if you checkout, I believe it was my 2nd video I uploaded, I did a gun blue on an old TP Mills putter that is essentially the same as black oxide. I will definitely do more in the future when I get the proper putters in, to do that finish.

[@jimadams5279]

@@igolf906 That is great. I liked the gun blue. Just thinking of blacking out this old Newport 2 to make it different.

[@igolf906]

@@jimadams5279 Very cool. I'm actually going to be looking into purchasing an older Art of Putting style Newport possibly to put either an oil can or a gun blue finish on.

[@jimadams5279]

@@igolf906 The Newport I have was beat up pretty bad. Been sanding it. Trying to smooth it out. The thing probably had the head cover on it one time in 20 years. Family putter it was passed down.

[@garrettwright9979]

Did you use MAP gas or regular propane for the torching? Love all the work you do!

[@wildlifeobsession8857]

What size air compressor do you use running your sand blaster?? Thanks

[@igolf906]

Not big enough! I use a 21 gallon 175 psi vertical. Good little compressor but when sandblasting I have to stop 2 to 3 times to let it run just to blast one putter properly. Will be upgrading soon! Looking to get a 2 stage at least 30 gallons. Will last a bit longer but will fill up way faster!

[@vgndg2]

looks nothing like the click bait thumbnail you posted.

[@shmirginhymer1867]

Looks like they changed the lighting for the thumbnail to make it stand out more. But cry some more buddy. Judging by your boyfriend in your profile pic I'm guessing you do that a lot.

[@igolf906]

I ❤️ all comments.....🤷‍♂️ lol