Scion Tc, Digital Designs, Rockford Fosgate, Orion

[@ashleyburke5577]

I agree that was harsh on break in. BUT ITS DD!!!!.

[@holeshotinspectionllc2412]

Pumped to see the new build🤙

[@georgesrisomsak9650]

Time to get a bit more serious! Alex bought 4 - 15" FI SP4 V2's, and we're going to 6th his truck this winter as well. I may do a flat wall, but I'm undecided. Just going to keep.busy this winter and I will see at another show soon! Hopefully it'll be close to as loud as yours! I'll need more power to muster through the rise these will have, but I'll revisit sub power a bit later when I get this playing and somewhat dialed. Then up the power and dial in once again, and pray for a 60!

[@georgesrisomsak9650]

And dude! When are going to post some vids? We need to see whatcha got now! I'll see it at the comp eventually if it's supposed to be low key.

[@holeshotinspectionllc2412]

@@georgesrisomsak9650 I have a bunch on the other channel I lost I even have the recones on vid, look up, “Chelsea and Holeshot Inspection”, on KZbin 🤙 channel will pull up

[@georgesrisomsak9650]

@@holeshotinspectionllc2412 going to check it out and sub now!

[@ashleyburke5577]

AWESOME AWESE SUB

[@brianflood2704]

Bro i need your help on my 08 scion tc I have a xspower d3400r under hood big 3 and a autotek 320 alt and pcm bypass in the back i have a monster bank looks like the one you have in this vid the amp is a DD M4a subs are DD 9915s and my voltage meter at idle are around 13.4 when i drive volts are 14.5/7

[@georgesrisomsak9650]

Sounds like the 320 small case isn't doing good idle output. You can try a smaller pulley, or have it reconfigured to a 240a which will do more idle output by a good amount. Enough to make the difference. I have one for sale if interested, in red, and was my personal that I built myself before switching to a large case as I'm planning on much more power when I finally start the build. Do you know the size of the current pulley?

[@brianflood2704]

@@georgesrisomsak9650 that year model TC is from the factory with low rpm which Is around 625/650 in which it needs to be around 800/825 rpms for it to do right. And also what or how did you make the volts regulator???

[@PunisherOfDeath101]

Such an agressive way of breaking in. Why not smoother tones that still streatch the spider. Low sweep back and forth or clean decaf mixes. Your sub your life dont mind me.

[@georgesrisomsak9650]

Agree, it's that I have another, that's been abused rediculous, and this needs to soften up! They will play in an common chamber flat wall likely. I've had one parking for most of a year now, so it's quite a bit softer. You're absolutely right, I'm being flat out mean to it, right out the gate! Lol! Poor tweeter amp at 1 ohm per channel too, full tilt. Guess I'm kind of an asshole to my equipment now that I revisit this video! 🤣 Thanks for watching! Build will start soon, just gathering the rest of what's needed for a wall build finally!

[@ashleyburke5577]

How much did you pay.

[@georgesrisomsak9650]

These are upwards of $1500 each. Best subs for heavy hard extended demos bar none in my opinion.