Send FX in Maschine?? Maschine tutorial 2019!

Affiliate link for NI’s Cyber Sale: bit.ly/3shOhnI
Get Komplete new for less than half off! Check this vid: • KOMPLETE 13 New for le...
Pick up Maschine here!: bit.ly/384VmJ5 (affiliate link)
Auxiliary Send FX are an important part of every DAW, and it's important to understand the benefits of them. It's a little complicated to set them up in Maschine, but take notes and you'll be able to add them to your projects or templates.
www.gibbonscreative.ca for more of what I do.
www.artwooddesigns.ca for the Maschine case!
#Maschine #NativeInstruments #Maschinetutorial

[@MrCshmn]

You forgot to change the mix level of your send effect to 100%. You had it on 50%. This is important. You don't want the send effect be doubling the original sound because it will end up getting louder and distorting (as heard in your audio). All you want hear on the effects send is the effect. Other than that, great tutorial for a Machine noob.:) Hopefully they will change it so when you open an effect on a group it automatically changes the dry/wet balance to wet. Send effects should always be 100% wet or it will just cause headroom issues.

[@MefliRecords]

Fully agree.

[@vaudronphilippe5415]

Its a kind boring to do ! In ableton create an aux track and put à rack with compressor ed réverb and utility gain and let s go to the track or group you want ! Simuler and better ! For me maschine is useful for démo and send it in the daw ! Not for mix and mastering and sure not for automation 😊

[@Glow0110]

Great call here. This is very important.

[@Pig586]

You sir, are the shizzle dizzle. Thanks for the best Maschine tutorials on YT.

[@TheBirdHouse]

This checks out!! 💯

[@icyrhoades169]

This guy is great. He should be the number one guy to explain the software and hardware. He's very knowledgeable and very very easy to follow. Thank you for your time to us what and how to do.

[@barbosa8498]

Holy Gzzz... I wish you could do more maschine tutorials. If I watched your videos 2 years ago, it would save me a lot of time. Please, do more tutos! haha they are very simple e hyper didactic . Nice work!

[@jefgibbons]

Thanks Bruno!!

[@hansuelischlaepfer4021]

Thanks for your videos, they are very helpful for me. You explain very clearly and you treat each time one issue. On this video I adore your t-shirt :)

[@jefgibbons]

Thanks Hans, I appreciate it!

[@simonc8265]

Thankyou for taking the time to put up. Really good explanation. I can see now how it's a key stepping stone for blending scenes into whole arrangements.

[@TRPJ24]

Great video, Jef. Your Maschine video's really help making the most of this great but also somewhat mysterious hardware.

[@SeanMadden]

Another great video. Always look forward to your Maschine content.

[@jefgibbons]

Thanks again Sean!

[@aaronj208]

Hey Jef. Thanks for all the videos. Every one of them is clear, concise, and inspiring. You have been a great help in developing my Maschine/production skills. Keep up the great work. Thanks again! Cheers brother.

[@TerekkiTerekki]

These tutorials are gold - you are a natural teacher - TY

[@michafortuna73]

Your Maschine videos are so helpful to me, i Always think i know much About Maschine, but you Show me every time new tips for it. Thanks and greets from Düsseldorf germany

[@jefgibbons]

Thanks Michael, much appreciated!

[@FLUFFYCAT_PNW]

Awesome stuff, Jef Every time I think to myself "I wish there were a video for this...", there you are.

[@dyewav9880]

I really find your videos helpful getting into the Maschine! Just started out recording with it and planning on posting some future work myself. Thanks!

[@InclusiveMusic]

Wow! That is just what I was trying to achieve Jef - Thank you - Great video!

[@maximeblais2032]

Repeating myself but you really are an amazing teacher ! Thank you.

[@ianmatthews7385]

Cheers dude! I've done some parallel compression this way. Gonna give this a go too. You explained the benefits of this really well. 👍

[@bg321able]

Brilliant tutorial (again!) - I was going to raise the 100% wet issue, but others have done it. A thousand thanks.

[@H4NDCRAFTED]

Subbed and liked , forgot how to do this in maschine but I just bought a plus and this saved the headache of finding it in the manual, cheers!

[@mtothezine]

Great video and well explained. Thanks

[@joshuadavid1804]

Excellent work bud. It'd be great if you made a video on side chain compression and automation as these two things took me forever to figure out how to do and are kinda difficult to explain to someone just getting started. Maybe that could be a more advanced tips and tricks video in the future. Just a thought/suggestion, much love.

[@jefgibbons]

+Joshua Bruni thanks Joshua! Definitely hoping to do one on that in the future...

[@Glow0110]

@@jefgibbons Awesome! Look forward to seeing this one too :)

[@DopamineOverload]

Thanks again, Jef. Awesome, helpful video.

[@DJMAYOMBE]

Thanks for the tut! :)

[@solowkeytv]

You are definitely the truth! Your videos have helped me out so much.

[@electrosquash6706]

This really contributes to the Maschine community! Best explanation ever!!! Perfect job!

[@jefgibbons]

Thanks so much!

[@Coronaboii88]

Much appreciated Prof. G!

[@alandoriah]

I really appreciate your Videos, helped me out a lot! Thx for explaining well!

[@jefgibbons]

Thanks Alan! Really appreciate it!

[@iamdjtab]

Absolutely helpful! THANK YOU!

[@TonyPBeats]

Thank you very much!! very cool vid and tutorial! Appreciate ya!

[@jefgibbons]

Thanks Tony!!

[@hectortorres1077]

Great videos very helpful!

[@oschu7820]

"Send FX are a little bit confusing..." but well explained! Thanks for that (again) and excited for more to come!

[@jefgibbons]

Thanks! I think most people just wonder what's the point? Mostly it's just for reverb...

[@nodoze123]

Thank you for this!

[@TheEtbetween]

Thanks ! Never understood it before

[@wavespot_rksundar]

Very helpful 👍

[@henrybarney3202]

I got a maschine a few months ago , my very first foray into production of any kind. It has been very exciting because I feel like some long-dormant hidden talent has finally emerged in a big way. But something has been missing from my projects and it's been frustrating because I couldn't figure out what ...until I watched this video! I can't wait to put this info to use ... Thanks so much for this, brother !

[@jefgibbons]

+Henry Barney man Henry, powerful words, thanks for sharing!!

[@anaphylastiks]

Nice box for your maschine. I made a similar one with a lid that opens up and holds my Novation launch control.

[@kielhall8363]

Thank you this has much value

[@jefgibbons]

+kiel hall thanks for the comment!

[@VikerTurrit]

Thx4 the Vid, i wish more than two Auxes for Maschine Software. Little Pro Tip: Send/Aux FX Plugins please always on 100% Wet :-)

[@jefgibbons]

Ahh dang... did I not have it at 100%? Facepalm...

[@hassmiloud4686]

As always top quality tutorial, just wish you could do one everyday. Also because of you”re vids I am starting qubase got a free copy with my ni audio 6, even thou it’s the Le edition but if I like it I might get the artist pro edition.

[@jefgibbons]

Right on! Good time to get it now as it's 50% off!

[@TheBirdHouse]

So helpful!!! FX always sound better on sends...

[@royevans4581]

I hit like and added a bit of reverb because that was an awesome video.

[@jefgibbons]

Best comment ;)

[@AlejandroGuerrero]

Lost in 4:10 but yes, you are in the second page, that took me some minutes.... :-) thanks!

[@pablostreams]

thank you very much sir!

[@MGJ_DK]

Very helpfull!!!

[@Juliano_DJOL]

I've been trying out the maschine plug in and like it so far, I'm not going all in or nothing but I might cld work it in here and there...

[@ralphrogers4898]

This is very helpful thank you!

[@jefgibbons]

+ralph rogers glad to hear it, thanks Ralph!

[@jefgibbons]

+ralph rogers you’re welcome Ralph!

[@gumboonwax]

Great content Jeff as always ... Could you do a tut video on automation (automating effects) using Maschine? Thank you in advance.

[@Moniz4productions]

Thank you!

[@moriss66]

Best Teacher on yt, thks a lot

[@jefgibbons]

+Marlon Alone dag nab Marlon! Much appreciated!!

[@matthewjforreal]

Jef your videos are amazing! Question on this video, how do you set the processing order of the send fx, ie if you want sound to send thru the delay first, and then the reverb

[@Prod.by.oddity]

Awesome Video. Do you have a tutorial on using Zones in the Maschine Software?

[@steadytube]

awesome lesson as alwasy Jef!!

[@jefgibbons]

Thanks again!

[@jasonversatile9807]

Fantastic, thank you very much kind sir. :)

[@spiglazov]

thanks

[@jiveman513]

Ty

[@sonicalstudios]

Also great if you need to export a dry and a wet copy of your track if you're sending it to other people and if you're mixing down in another software

[@jefgibbons]

For sure! One thing to disable as opposed to a whole bunch!

[@jacknapier1749]

Hey Jef, thank you very much for your fantastic in depth tutorials. After working through the aux routing i came along a question: is it possible to pre hear the aux return effect without the main audio?

[@thomi3703]

Thanks! you make the most comprehensible tutorials about Maschine by far. The workflow you describe works fine for the midi instruments. However when I plugin a microphone I cannot hear the effect sent via the Aux channel when I speak in the microphone. Is there a way to get it to work also for audio?

[@criticalwoodhip-hopforever2657]

Hi @Jeff Gibbons Love your vidéo man 🙏🏼 Is it possible to use the touchstrip to control how much signal we send in our reverb ? I need for a live performance to be able to add reverb when i need quickly and using the touchstrip to control the amount of signal i send in my FX aux will be perfect . Any tips please ?

[@MakingMadBeats]

How would I route things when I want to use external hardware on my mixbus? Took a look at the Warm Audio Bus Compressor and would like to give it a try.

[@ronready66]

can you do a video on sending stems or sending a complete song as individual audio files to your daw. I use logic fyi

[@Luisgarcia-il5wy]

great tutorial!! How can i export for example the group with the send fx?? i tried and no fx on the exported loop. thanks!

[@dimitrioskappa137]

really learning a lot of your videos and thanx but if you can show the screen with the program(maschine) also along with the hardware

[@jefgibbons]

+Madsen Jj thanks Madsen, I’ll try to incorporate the maschine shot more when relevant in future vids.

[@WeathermanBeatz]

How can i trackout the stems with the FX included on each sound? Sometimes i use the send fx with Half time but it gets removed when i trackout the beat.

[@RoyPerez-drumnote]

You don't have to shift browse, you can just click the 4D encoder.

[@NoEsHumano]

how does it work when you tap the metronome to adjust the tempo? like to push up or down the tempo by tapping it the TAP Metro button?

[@aristocratmusic]

This is definitely a really good way to utilize FX sends, but what about when you want to export individual stems to then mix in another DAW? Wouldn't all of your sounds be printed dry with no reverb/delay?

[@philanthony_dj]

Is it possible to send a FX to a Mixer like Xone 96 over Send/Return to use a Fx for all Channels?

[@alessandrosori732]

For example, if I want the filter to be completely deactivated, how do I do it? because even if you put it completely dry, it still affects the sound. I need it to be completely deactivated to only use the filter at the time of a part of the song but then deactivate it. What other way is there?

[@Gravity0Lab]

How do I make the shipment work during a pattern? because when I apply what you show it applies to all the patterns

[@mattsynth]

Can you play the piano instrument while tweaking the effects at the same time?

[@octaviusgrant5726]

Hello Jeff, I’m late to the party. Can you do this with 3rd party fx plugins as well? Or just the ones that came with maschine?

[@deathstryke24]

also i was wondering if you had a video showing how to use external gear with maschine? i have a microkorg connected to my MK3, but i can only use the maschine sounds. i want to be able to use the korgs sounds in maschine.

[@jefgibbons]

Man, I picked up a MikroKorg a few months ago on CL, and I've been meaning to do a Maschine video on this exact thing... I'll start the process!

[@GrootsieTheDog]

The aux send efx only works when the Sound mixer view is used to adjust levels (for example, to reduce the audio signal to zero and have the delay efx continue to trail). For those who use tone sound per group and use Group Mixer view to adjust levels (so that more than one group track at a time can be adjusted), it does not work. Turning down the levels to zero in Group view still allows for a signal to go through. This is a real issue IMO. Luckily, I do ambient and only use a few group tracks per song so adding a delay and reverb on each group/instrument doesn't kill the CPU but still, for other reasons...any workarounds/settings Im not thinking about?

[@GrootsieTheDog]

I could set up a Master Macro page controlling the sound channel levels for each group. This could be great live - setting up each page to control an individual parameter for each group i.e. filter page (all filters of each synth per group), levels page, etc. Any other suggestions?

[@seriousii252]

Great Videos Jef, and well appreciated. I'm hoping you can help regarding a problem I've been trying to resolve. Using a Maschine Mikro MKIII and perform FX, while as a VST in a DAW. I'm hoping to get it working in Protools, although I do use Cubase, as I'd imagine the setup would be similar. So, I'm trying to use the Maschine VST in said DAW as I have the routing (1 instrument track -> 16 audio tracks) allowing wav instead of midi. When arming and recording tracks will dump in wave form. It will also register when muting/soloing a group or sample. Using perform FX (what I'm trying to accomplish here) on the Maschine does not register on monitor or recording. Is there a way to do this that you know of?

[@seriousii252]

To be a little more granular. Creating 1 group for instance, 16 sounds. Then choosing a sound, adding the stutter FX to that sound. Now when it is played and laid out in Protools, I'm wanting to use perform FX (stutter) for that sound as it's recording in realtime from the Maschine VST to Protools.

[@xavierb1307]

What about when exporting audio? Do you export the send fx group also?

[@niklaswikstrom78]

This is great! Can you put an fx on a group and then an additional fx on a specific sound within that group?

[@jefgibbons]

You bet, just put on fx on the sound individually

[@niklaswikstrom78]

@@jefgibbons Thanks Jef, when I'm trying this out now though, it seems that when I change the db as you are doing (how much to send into the effect), that directly affects the overall volume of that particular group or sound, which is not what I want ideally.

[@djalain7696]

Super! Question: where do you get the maschine case? Thanks

[@jefgibbons]

www.artswooddesigns.ca i think they're getting a waiting list going!

[@WhisperLeo]

Stupid question why not just put a reverb on the master and be done with it? Why do you have to send a portion?

[@manny75586]

It's impossible to stress enough how useful send effects are. Most people who have worked in full featured DAWS like StudioOne,Logic, Cubase etc know how great they are. I run into way more people in the Maschine/Akai groove box world who put an effect on each group. Just for the sake of cohesiveness, your longest reverb should be on every sound in your project to some degree. It's difficult to keep that consistent without sends. Great video.

[@lowlowseesee]

damn thats really simple

[@paulhorsfield1]

can't see so well. can you do this a bit slower, rather than flying through it? thanks

[@deathstryke24]

mine says B1 S1 did i miss something?

[@deathstryke24]

nvm figured it out lol

[@jefgibbons]

+deathstryke24 glad you got it sorted!

[@NathanBrown-dk5wh]

Do you have something on maschine integration

[@jefgibbons]

+Nathan Brown hey Nathan, what did you have in mind?

[@NathanBrown-dk5wh]

@@jefgibbons I'm looking to how to get midi recorded in a daw using maschine as a plugin but using the hardware not the actual midi keyboard and using all the features of note repeat and etc without having to be inside the maschine software

[@jefgibbons]

​@@NathanBrown-dk5wh I have a video on Cubase and Maschine, which DAW are you on?

[@NathanBrown-dk5wh]

@@jefgibbons pro tools

[@SeanRaine]

@@jefgibbons i use logic and have been having trouble making it flow smoothly

[@dkkrecords]

dopalicious ...openD a whole new understanding of mk3

[@dkkrecords]

spoke to a pal about this who mentioned his way of doing was to have 1 group...let's say group A....load 12 different instruments or loops and then pads 12-16 with effects ....all the usual suspects...reverb delay, and then two others to taste...once done take care of the routing and sim sala bim......both methods working real well...

[@Cutflower]

Why not just put the reverb on the master?

[@jefgibbons]

Great question, if you do that, everything gets the same amount of reverb. With the sends you can put a different amount on every single group AND sound!

[@3dbits_art]

Your videos are great in every aspect! BUT your playlists are a complete mess. Would be great if you make a pure Cubase playlist and a pure Maschine playlist and a playlist about your film/story projects. Creating those playlists would be just a little work for you - but viewers would PAY by their view time!

[@jefgibbons]

+Oliver R. Sounds like a good idea Oliver, I’ll do that