I thinking how difficult those rivets seem to be - and then you said they were stainless - that makes sense!
@SendItJonBoatsАй бұрын
I was riding the struggle bus trying to get those rivets in, then I realized they were stainless, duh me!!!! Only took 2 months for my finger to heal.
@raddlesoutdoors570Ай бұрын
Cant wait to see all the other videos you are coming out with!!! Hope to learn some stuff!!
@SendItJonBoatsАй бұрын
Thank you, Look forward to pumping out some more videos soon and sharing some of the things I learned.
@FL.AirBoaterАй бұрын
Good to see you back brother!!!
@SendItJonBoatsАй бұрын
Glad to be back, and thanks for watching.
@lovetogun361129 күн бұрын
Definitely like the cooler seat mod. Definitely need to upgrade my battery boat balast anchor sinker too
@SendItJonBoats27 күн бұрын
The cooler seat has been one of my favorites so far. Super comfy and I like having the option of using for a cooler, livewell, or dry storage if needed.
@The_Lost_Alaskan7813 күн бұрын
We need more “Send It”!!!
@coltensawyer6761Ай бұрын
Glad to see some content on the ole boat! That build is the perfect cat rig. How has that predator held up without billet rods ? I wanna use a performance 670 governor bracket to get my stock mud motor up in the 4300 rpm range but I’m not sure if valves will float 🤔. Your opinion ?
@SendItJonBoatsАй бұрын
So far it's holding up good. Been running it around 4500rpms pretty constantly. I did the heavier valve springs when I ported the heads so I have not had any valve float issues. I plan on doing the performance 670 cam and rods at some point in the future to see what kind of increase in performance I can get. But so far it has been a really good engine.
@shadonthefly15 күн бұрын
"My strong hand!" LOL, another Scary Movie 2 Fan!
@pabloesquivel754Ай бұрын
Hey scooter, how many sheets of stencils did you use on your paint job? How much did you pay for them? Do you have any links for the shop you got them from? How much paint in total did you end up using? Thanks bro!
@SendItJonBoats27 күн бұрын
700ish bucks, I didnt even count how many sheets but I will never ever ever do it again. Total waste of time and money. I scratched the hell out of it within the first 2 trips out on the water. I used 1 gallon of paint and almost 1 gallon of clear.
@gabeofalltrades077029 күн бұрын
Was that the hwy 83 bridge around the 20 minute mark?
@SendItJonBoats27 күн бұрын
No, I was on the Yellow River on that particular trip. I do go down to the 83 bridge on the Ocmulgee sometimes. Good fishing down there.
@gabeofalltrades077026 күн бұрын
@@SendItJonBoats ha cool, I live like 3 miles from the 83 bridge so usually put in there or in Juliette depending on what I’m doing. Maybe I’ll run into you some day.
@gabeofalltrades077026 күн бұрын
@@SendItJonBoats where is the yellow river at? I’ve been looking for some new water to explore
@azlongtalesАй бұрын
That electrical tape bandage 😂 this medic approves. I can never work on #sonoranmudcat without hurting myself.
@SendItJonBoatsАй бұрын
Ha ha... bro, my finger was jacked up for months after that. Luckily I filmed that earlier this year.
@MurphyslawfarmАй бұрын
G'day awesome video and my strong hand got me 😂😂😂😂
@SendItJonBoatsАй бұрын
LoL. Hey Murph, glad you liked the strong hand... even though it was a painful had for a few mo the after I cracked my nail in half
@MurphyslawfarmАй бұрын
@SendItJonBoats I know the pain I almost lost my hand a year ago. So I know how painful nails can be
@SendItJonBoatsАй бұрын
It was not a fun experience, but it finally healed a few months later.
@greenpighunter6930Ай бұрын
Excellent brother. Boat looks good. Care with all that bleeding, it screw up you B.A.C..
@SendItJonBoats27 күн бұрын
LMAO... yeah dont want to bleed out all the good stuff. Thanks for watching bud!
@The_Lost_Alaskan78Ай бұрын
Ha ha, you thought it was going to be easy. That was the first fuck up!
@SendItJonBoatsАй бұрын
Bwwahhaa... when it comes to boat builds it never is easy.
@SkellyWaggs15 күн бұрын
why is nobody talking about the ants all over his cooler lol
@SendItJonBoats14 күн бұрын
I dunno, but I left that in there specifically to see if anyone was paying attention.
@tommccormick3890Ай бұрын
Blood and tears! LOL. Not just me.
@SendItJonBoatsАй бұрын
This boat has been responsible for more injuries than any boat before. I'm wearing a lot of scars from this boat lol.
@simonsilvagno4900Ай бұрын
You are more of a man than me. I would just get a 25$ air rivet gun from harbor freight
@SendItJonBoatsАй бұрын
Man I'm glad you brought that up. I have been meaning to get one of those and I keep forgetting about it. Thanks for reminding me.
@yourmomsdildo393815 күн бұрын
Flex seal is even cheaper.
@gabeofalltrades077029 күн бұрын
I made the trolling motor mistake😂
@SendItJonBoats27 күн бұрын
Yeah and I felt like a total dumb dumb the first time I spun the trolling motor around and it ripped the plug out. Im glad I got it fixed but dang it pissed me off.
@longtailboat29 күн бұрын
Your boat is made of aluminum, right?
@SendItJonBoats27 күн бұрын
Yes it is. 1979 Lowe 1648 jon boat.
@dougaskew5056Ай бұрын
Thanks man I’m building 1432 took hints from you making a Flathead boat looking at mud skipper twister xl comments?
@SendItJonBoatsАй бұрын
I havent used a twister yet but I am going too at some point, I see a lot of mixed reviews but my buddies over at AZ Longtails love the twister.
@nathanbillingsley42Ай бұрын
There I was thinking, look at him doing pop rivets like a man, then boom back to a girl. Ill give you 1/2 a man point. But good video 😂
@SendItJonBoatsАй бұрын
Dude, I had to edit out the tears and 27 minutes of screaming.... it hurted my mangina! LOL
@scottjordonАй бұрын
@LIKE #14!!! 😊😊😊
@SendItJonBoatsАй бұрын
#14? What I miss, or did I have too much haterade today?