How to Replace Repair the Charger Port - iPhone X

iPhone X Charger Port - amzn.to/2Sl52Je
My Favorite Tool Kit -
Hot Plate Machine for repairs - amzn.to/2hnyqQ8
Heat Gun for repairs - amzn.to/2hlClgb
The camera used to film this video - amzn.to/2AuXTvL
This is a video tutorial on how to replace the charging port on your Apple iPhone X.
All models -
A1865
A1901
A1902
I used the following tools:
1. Small Phillips head screwdriver
2. Open Prying tool
3. Hair dryer or heat gun
Warning: Repairs will void your warranty with the service provider and manufacturer of the device. We are not responsible for any damage caused by attempting this repair.

[@user-vx3oc2fj1p]

“You’ll just have to remove” *takes apart the whole phone

[@cindyrios2406]

😂🤣😂🤣

[@thesouthamerican.2282]

Apple crap

[@darumsdad]

Beware! There are lots of step that he skips when re-assembling the lower half of the phone. (not to mention he completely skips the need to remove the adhesive to remove the battery). I would NOT use this video if you are a beginner.

[@saudiprince6532]

Cheers Dave

[@benjaminfranklin2408]

Okay karen

[@chrisa1161]

Thanks Dave, but you just need to heat the phone so that the adhesive is not as sticky. Be careful not to puncture or rip the battery!

[@twinfrmda7]

@@benjaminfranklin2408 you calling them karen when yo phone broke you gon be looking dumb

[@loidmaranon6042]

You’re right sir. I am a legit technician and there’s so much to learn before following this tutorial else it will cost people a lot of money especially if the motherboard will be shorted due to battery improper removal

[@stephenplantone9720]

This video confirmed I’m taking my phone to the repair shop.

[@loidmaranon6042]

Yeah this is not an easy job. 1 wrong move can damaged the board or LCD

[@danielvitolo2595]

Yes, I agree, but when my brother tried to replace his charge port at a repair shop, they said it wasn’t compatible with the new charge port, so I don’t know what to do

[@zak87]

Just FYI to all who try, the battery is held down by adhesive. It DOES NOT come out remotely close to the level of ease this video shows.

[@jahmo0]

And he used a metal tool to pry it out, someone is gonna watch this and start a fire .. smh

[@johntheone7669]

It took me 40 minutes just for the battery lol

[@jayallan7885]

need a little rubbing alcohol under the battery to soften the tape......then dry it completely before starting the phone

[@LanceOlenik]

I've done a lot of iPhone repair work and this is by far the most involved project. My charging port is struggling, but not completely broken, so I'm going to wait on this one. Nice job on the video!

[@chrisa1161]

Thanks for the tutorial, that hat did get in the way a couple of times😂

[@CJRomanes]

Very gently, carefully. Be very careful the cable is thin. *Aggressively pulls the cable with bare hands*

[@JohnnyK1]

You don't have to remove the battery! It's enough to loose and lift the bottom part of the battery only. You'll need a plastic pick and a heat gun again. Besides, this video doesn't show how to remove the battery. Also, there is no need to remove the top face recognition piece. It can stay. So, lots of unnecessary dis-assembly. However, still, this is a very helpful tutorial. This guy has an excellent detailed video how to remove the screen/digitizer as well.

[@KaeyahniBanks]

That’s too much to do!! Just for the charger port wtf

[@peytonbullock4939]

Karmen Loveee They pack so much tech into phones these days I’m not surprised it takes about 35 minutes for an experienced person to replace the charging port.

[@Jojohumf]

They do it on purpose so people can’t repair their own phones like we used to be able to, they layer it in a way that’s makes it’s very difficult to replace the charging port

[@warriorjust]

Yeah right!

[@karimguet5967]

Hi, thank you for the video. At 6:05 you used a flat head screwdriver. What is the type of that screw ? Is there a more convenient screwdriver that can be used for that type of screws ? Thanks 👍

[@vKulprit]

Yes cause everyone's got a hot plate

[@tbc1_slava807]

you can use heatgun or hot iron as well altho or 3d printer heated bed. dont reccomentd the hot iron tho

[@jayallan7885]

been repairing iphones for years.....never had to use heat on one...except to loosen a flex, never to remove a screen.......

[@johnjoseph661]

@@jayallan7885 all you need is a blade eh? 😁

[@jayallan7885]

@@johnjoseph661 just a pentalobe and very thin piece of steel.....

[@but199018]

Welp!!!! Looks like I'm getting a new phone!

[@emperorfloch]

😂😂😂

[@DD-vz7ci]

@@emperorfloch All hail emperor floch✊

[@latafairam]

Exactly

[@nilssamuelsson467]

Pro tip: use an ice cube tray for parts. Don't go criss cross, go from one side to the other in a straight line. Place all the parts of each component in the pocket, don't separate covers, part and screws. Then just start from the back on reassembly. This will save you a lot of mental space.

[@chester_ville_4066]

Thank you so much I appreciate you doing the video in reverse you're a king

[@johnsonjuan3]

Excellent content. I can see you know what you are doing.

[@BossLaiiDy]

Man I’m already lost. Too many unscrews and disconnects 🤦🏽‍♀️ I don’t think I want to replace the charger port by myself anymore lol

[@loidmaranon6042]

😂 you’re right

[@thegeniusdjwhizy_entertainment]

Does the charging port feature the network chip?

[@alchimista83]

How come that at the beginning the iphone shows 7:59 and at the end 7:04? 12 hours to replace?

[@johnyparrish8096]

What would you charge me to replace charging port and speaker ?

[@cristobalbalenciaga7295]

With every "and next up" my courage dropped. After the 5th I realized that it's going to be a new phone for me..... :(

[@zboral563]

Hello , what doing this bracket from 5:55?

[@RStamilgameing03]

Charger port not connected. wireless charging used charger yes are no

[@christopherperalta8407]

The title should be "how to dismantle an iphone x 😂

[@scottmcgrath3367]

Awesome Video. I followed step by step and took my time. Thank you.

[@SophieElle16]

I have one of these to do at work tomorrow, I'm not sure whether this video has made me feel better or worse about it, it looks so hard!!

[@tonyh8965]

Hi all, what's the black paper like stuff on the inside bottom cover the battery sits on? little bit scrapped off.

[@chanellejade6206]

Can you use a charging port from a iPhone 6s ?

[@sytxchVo2]

the akku so easy going out?

[@Mayami_19]

Pls sorry for asking Can someone tell me the name of the tool his using to remove the screen 🙏🏾🙏🏾🙏🏾

[@euvi85]

You can run the flex cable on top of the motherboard and avoid a lot of these steps. Sure it’s not pretty but it works and that’s what matters.

[@28Jcarlo]

I thought my charging port was damaged but it was full with lint. I used a tooth pick and rubbing alcohol to clean it.

[@jorgesaavedra9938]

Thank you for publishing this. Your comment resolved my problem

[@Pod6168]

That solved it for me. Thank you.

[@Savageslash1234]

I dont know why i didn't think of that it work for me as well

[@JesusMartinezCreates]

youre a god!

[@edwinmonterroza7426]

I will have to do that too thanks.

[@jazzy2164]

holy shit, that’s so much work, just to replace the charging port, my iphone 5, 5s and x all suffer from the same problem, loose charging port, and i feel like replacing it is too much hasle, so i’m just gonna replace my phone when it dies next iphone i want type c port, in screen touch id, remove notch, please apple

[@followthegamerftg8361]

Would this fix my face id and make it start working again?

[@amcreation1496]

After doing this , my mobile is not charging, please help mee , what to do

[@dwainbeckford1]

Your website is not working anymore, I cannot access the tool kit link.

[@jacquesdahan494]

great video !

[@Jc-jv5bu]

Do you need to program the port? Because when I put the new port in my phone was laggy and would bootlop.

[@amelbermudez908]

What is the name of the shield/flex cable at 5:58 and what is its function? Thank you in advance!

[@maguinalejandro8036]

It's the GSM/cellular signal antenna.

[@lowerbucksheatingoil7576]

Awesome tutorial

[@SergTech]

Thank you! Cheers!

[@pernillahall2674]

That Iphone has been opened before.

[@jmander82]

They always pre-teardown phones. Tutorials would take so much longer and not be as effective if you had to watch them open and remove everything for the first time. It's just for efficiency

[@lik6146]

Well I found a way to skip a lot of the work. Just remove the screen and everything on the bottom of the phone like he did until he started working on the battery. Then just lift the charging port with its cable and rip it at the side where it goes under the battery. Put the new one there and make the cable go over the battery. Fits a bit snug and the loudspeaker will go back in a little bit more difficult, but saves a lot of effort.

[@sk8ingiz4ever]

This was a great tutorial keep these videos going !

[@grisdelrio3580]

Will this work if I have a broken pin in the charger area?

[@hunterrichardson3845]

Yes

[@vfeuer9236]

does it affect IP67 water resistance?

[@steverahe]

when you take out screws your don’t seem to need to have to keep track of them for reassembly - but since they are lots of sizes I would think it would be important to keep them organized. How do you suggest a for a non-pro so you know you’re not putting a long screw when a short one goes? thanks

[@MohammadAli-yh1mw]

buy a tray with different sections. thats what i do.

[@juniemarmsalacupii3504]

Mga magkano kaya magagasta pagnagpaayos ng charger port?

[@NaviYT]

Bruv, that took a fat minute, thank you though! 👍🏻

[@stationnetcaferepairs8849]

HI, I changed the charging flex on iPhone X. After that my mobile's google map is not working properly. It's working too slow and the blue indicator arrow is moving too slow it doesn't move with me while driving and stopped to do re-routing if I choose another street. Please help me.

[@quirino18]

+i appreciate your instructions! however you made me remove the speaker AREA 3 TIMES LOL you skipped installing all 3 large screws

[@cesarlarios6573]

That was a great job you did with the Iphone 10, of course you have to have a bit of electronics back ground, is good to mention that you have to ground your self, because of the static on your body.

[@KipdoesStuff]

YOu need absolutely no electronic background. a better video than this one would help though.

[@TheFarazz]

Very helpful video however, I wasn't able to solve the issue with my iPhone X only being able to charge when it's turned off. I replaced the battery as well as charging port but it didn't help with the problem. Probably something is wrong in the motherboard.

[@MuhammadKhan-ii9ir]

What temperature should the hot air gun be while using ?

[@altielmaltiel6238]

80 C

[@rsftw223]

Just go to a phone store and pay $50 to get a changed cause they got the better tools better then breaking your phone and paying hundreds of dollars to fix it

[@P4rkerMann]

If only it was $50 my man. WAY more to get it replaced

[@JohnnyK1]

Apple store gave a quote of $350.

[@Doc02864]

@@JohnnyK1 called today. $650!

[@19501960]

The room for error on this repair is enormous. wireless charger is the option, forget the headphone option.

[@KipdoesStuff]

It is actually relatively easy, this guy makes it harder.

[@JohnnyK1]

@@KipdoesStuff I felt like a surgeon for over 2 hours of work.

[@josephstarkey5773]

How do you save ur pictures

[@anthony2039]

one of my flat head screws is stripped, what should i do to get it out?

[@JORDANDAWN815]

Good show. Fun to watch, but almost no one in their right mind would attempt this, technically gifted or not.

[@KipdoesStuff]

hundreds of these are replaced daily, lol. Its easy

[@maurogonzalez2999]

You sound uneducated

[@xxjuztgetzworsexx]

You can’t just use an adapter?

[@teegee2332]

Just replaced my charger port but now my phone won’t connect to WiFi? Any idea on how to fix this?

[@matteodefrancesco5133]

had to do this, by-myself, after that repair, face-id dosen't work anymore I lost it, and also the whole camera system doesn't work pretty well if I turn my phone off and on the cameras turn black like no video signal and I had to do a trick with the software to make them in function. I repeat face-id doesn't work after that repair

[@ben3438]

Correction. YOUR face id doesn't work after this repair.

[@matteodefrancesco5133]

Ben Masterson yes, i know, My Face-ID dosn’t work anymore

[@danielvitolo2595]

Looks like every other part except for the charge port is easier to replace!

[@anything3009]

humm, return to apple outlet, get a new phone. lmao

[@mmaaddict78]

That’s exactly what Apple wants you to do.

[@Eltrailerokusikusa]

Do you even know how to put back all those screws?? Lol

[@maxtitan4671]

Thank you

[@jasoggg]

My iPhone after this replacement still restarting, someone know what can be the reason? Thank u.

[@Bird_Dog45]

Try replacing battery not holding its charge

[@WavyOnMobile]

He did not need to do all of that for a charging port

[@freakyfrequency2530]

messed my battery up and punctured the black skin around batter because he did not mention anything about adhesive on the battery !

[@thesenseman]

I like you bro

[@justinmurphy3976]

Instead of using the flat head. Get a stand off screw driver.

[@ranjanabaidmutha7000]

Is data lost during this ????

[@gotababy2]

Nope. Everything is as it was. I just did this for my phone. No issues when turned back on.

[@vikasvishwakarma9232]

no

[@AngerMike]

what goes on my nerve is that he doesn't screw the screws in the same order in that he unscrews the screws -.-

[@rex86uk]

I thought this was going to be like a 5 min job, ffs

[@JohnnyK1]

3 hours for the first time.

[@princezzlily7700]

What happens if I damage the black thin layer behind the charging port? Can I replace that part? What is that part called?

[@dylanpettway8975]

EMI Ground connector yes you can replace this

[@YoungBurr94]

Moral of the story is I just need to buy a new phone instead…

[@stan555]

hack: cop a wireless charger until you get it repaired

[@hunterjames7786]

My wireless charging doesn’t work either

[@nmujuice6676]

today I’ma be showing you how to change the port of your iPhone him the fixes the whole phone like it’s brand new

[@jasonwindow7315]

So after doing this now I have a problem that after 10 mins the phone resets it self help

[@BWade96]

You ever figure this out??

[@claudiamerli3217]

you probably used a faulty replacement part, this happened to me twice with cheap parts from ebay: after the replacement the phone started to boot loop, everything worked fine for 5 minutes and then the phone started to crash.. this is a common problem i guess

[@emanuelespa]

Sembra molto facile a vederlo fare

[@kelvinkleinn]

daat video, idon´t see the iphone man!!!

[@Ledementaurus]

I unplugged the screen while the battery was still plugged in and now the screen doesn’t work. Lol

[@parserito56]

Shut up , From Cali ... buena parcerooooo hahahaha

[@KlipzTTv]

but thats not the tool kit your using doing the repair though in any of your videos

[@renasrasul3233]

❤❤

[@abc20002koonrsr]

Why did the port fup in the first place , a joke if you ask me , i will wirless charge thanks

[@stardust-mf1oq]

nevermind.....

[@alexdaniels8934]

Let’s remove all the adhesive and not replace it... I guess don’t get it wet now

[@sanmac9621]

you can’t remember screws and then screwed up … 😄

[@DavidUpCalistenics]

Well I’m going to pay then

[@catalinpanait9666]

Imagine replacing it and it doesn't charge😂🥶

[@reznarizqy]

Use original part, if not u will get iphone restart every 3 min syndrome

[@faujisimp7090]

Just buy a wireless charger

[@chris1924fly]

Looks like the phone would get fucked up about to just buy a wireless pad

[@KaeyahniBanks]

Wtf

[@johndowning2231]

That damned cap bill sure doesn’t help a bit!

[@crisdiez7077]

What a freaking mess.. I guess it’s time for a new phone 😅😅😅

[@spazimal]

why didn't you mention using the pull tabs for removing the battery adhesive? i saw a minor puff of smoke and am pretty certain i punctured the battery. now i have to replace the battery! the video was awesome, but i have to give it a thumbs down. i could have set my house on fire.

[@mshizz7392]

Wtf all that for a cable

[@KipdoesStuff]

Blame Apple, they try to make it impossible.

[@d1ddyp0p]

Apple makes repair annoying.