Setup Yamaha MG10XU Audio Mixer For Zoom

[@abrambarrett5584]

Thank you for your videos, they are exactly what I needed to understand this board. 🤙🏼

[@codependentmillennial]

This is really helpful. I have never used a mixer before so I definitely have to learn some more basics before I fully understand everything you’re doing in this video, but I know that I’ll still be able to set everything up with this video even before I learn more about how all of this works. Thank you!!!!

[@kamalranatunga]

The best audio Engineer I've ever had in cyberspace .. thanks a lot that a person like me without much tech knowledge manage to set up MG10XU unit for zoom. Now I have an issue connecting Boya M1 Lav mic, tried with different connectors and just give notice without audio coming out. Much appreciate your advice or perhaps another video, since this setup is very common with online teaching. Thanks

[@RoamingAroundUSA]

This is a great mixer, no doubts! I just recently bought one, and I am super-duper happy with it!

[@noelcidro708]

Big thank you for this. Having output now back to my monitor headphone. Thank you so much! God bless you all.

[@kettnercreative]

Glad it helped!

[@disciple3183]

Hey KC, first I want to say your channel provides tremendous value to the community. You all really stand in the gap where many A/V channels are falling short. You deliver excellent quality and explanation with no strings attached. Second, I have a question. I am a “newb.” I purchased a Yamaha mg6 (non fix) to use in my home studio. I record content for my KZbin channel and want to get into interviewing and live-streaming. I have Streamyard. So my question is this: since I didn’t understand “mix minus” and the importance of having an “aux” on a mixer before purchasing the MG6, what is the best way for me to interview through Streamyard using my MacBook, MG6 and my Shure dynamic mic? Any advice you can give would be greatly appreciated. Any other routes besides buying the MG10?

[@33rdGemini]

@4:33 Thank you! I was setting this mixer up with voicemeeter and was getting a feedback loop into discord from this mixer and it was all because of the "Mon/To ST" button being pressed down.

[@One-Eyed-Willly]

Thanks for explaining the "" to mon/to st" button. I was wounding what that button was for and I was lucky that I use Zoom and other software in half duplex so it didn't loop back.

[@kettnercreative]

Glad it helped!

[@hanzo5511]

Subscribed. Nice tutorial. Helps a lot.

[@itinkle]

Thanks for: not doing the like and subscribe at the beginning of the video explaining clearly and concisely having great quality video and sound. I don't know about subscribing, but its a like for now for sure.

[@leorakeshofficial5726]

Good try man ws useful and also we have to download Yamaha Steinberg software for that unless it won't show input or output name MG , u forgot to tell I guess And thank U for the mg 10xu review bcoz after watching urs I bought one😊

[@Mickeyj1981]

I really appreciate you tutorials. This one helped me set up zoom for a client using the same mixer. I was using my IRig but this way is better...Thanks 👍🏾.

[@kettnercreative]

Glad it helped!

[@nicolaschen4147]

谢谢，我终于弄明白LINE/USB和 MON/ST这两个按钮的使用方法了。

[@Buddymitchell069]

How do you get that clear sound with the base sound in your voice a very professional sound

[@jamescrismore4741]

This is really helpful! thanks man

[@kettnercreative]

Glad it helped!

[@TheElevenBravo]

Great job, sir! Thank you so much!

[@marcobenitez3131]

I appreciate your tutorials. You’re very good at breaking things down. I just got my Yamaha mg10xu yesterday. I intend to connect it to my MacBook Pro and use it to record the audio for a zoom meeting. I plan to use the two XLR outputs to send the mix to my Tascam recorder. Here are my questions: 1. Will using the setup you outlined in this video send a mix minus back to zoom? That way my guest will only hear my voice on her end? 2. I want to record the zoom usb input from line 9/10 panned to the right and record my mic input on line 1 panned to the left. My goal is to then have two separate tracks for my mic’s audio and my guest’s that way I can’t improve my guest’s sound later since they will be speaking into their computer’s mic. Do you think what the setup I just described will work as I intend it to? Thanks so much for your time and hope you can reply.

[@rajdesai8310]

Hello KC, very informative tutorial. I just have one question to set up Zoom meeting; how to set it up the connection so that the participants and the presenter’s voice come thru pa speaker and not the headphones? Thank you

[@Alan47523]

Love your clear and practical explanations Jordan. I would like to know the best way to connect the Yamaha MG10XUI to run a hybrid event. Several Rode wireless mic inputs, the signal then needs to go out both to speakers in the room and to people on Zoom. Also when people on Zoom ask questions I need for that to go to the room speakers for the people in the room to hear the Zoom people. Is it best to use the USB connection for input from computer, or output or best to avoid using USB for this scenario. Any help here would be greatly appreciated.

[@franciscolucero8541]

Can you make a video showing how to connect a mixer to an interface to a laptop using Zoom and show the settings for a live worship band.

[@Joe-ci3rn]

Great content. Thank you. Is there a way to connect the mixer to a PC over a wired or wireless network connection?

[@emmersivo]

Great video and explanation. Yhe only thing that tangled headphones cable is freaking me out

[@kettnercreative]

It happens. We can't all have perfect studios ahha. Thanks for the comment.

[@ThomasWilliamsIII]

Thanks for the informative video. We have a large ball room with built in speakers and XLR connections for mics and mixers on a wall plate. I want to take advantage of the audio equipment in the room. I'm new at this but I'm trying to connect a ZED10 mixer to a laptop via USB and selecting the mixer codec to route speakers and Shure microphones for a Zoom meeting. Is there a video I can watch that explains how to make the wired connections. Again, thank you

[@rashawn01ca]

Thanks! Very helpful.

[@JustOneSmallExplorer]

If hosting a hybrid Zoom/in-person meeting would I connect my powered speakers to the "Monitor Out" instead of the Stereo Out so that the person on zoom doesn't hear themselves? I'm trying to make it so our in-person audience can hear our presenters, Mic 1 & 2, through the speakers in the room and for our Zoom audience to hear them as well without them hearing themselves or creating an echo.

[@stevetx7]

I would like to be able to also output the zoom audio to speakers in the same room. Can I do that without getting feedback? If so, how do I avoid feedback? We plan to feed several microphones into the mixer from other speakers and there will also be an live audience as well as Zoom attendees.

[@kwasikwakwa8016]

Any responses to this?

[@aaronwhitelaw4342]

How do you do that and setup, along with having a live pep rally? Speakers connected TO the mixer in the gym while streaming on zoom??

[@puion1008]

I am interested on this setup as well. Thanks for asking!!!

[@kaffepojke]

This video seems to be exactly what I am looking for, but for the wrong mixer! I am having similar problems trying to set up a fully hybrid Zoom meeting using a Behringer 1204 USB. I have never had a 100% accurate sound setup, although all components of the mix have worked at one point or another. I am a complete novice to mixing and mixers, so I am somewhat overwhelmed. Do you happen to have a "settings" video for bother Windows and 1204 USB? I am using 2 laptops for the setup, 1 each of Windows 10 / 11. Thank you.

[@chrismusic1517]

Nicely explained 🙌🏽

[@robertpendilla3614]

Thanks for your tutorials! Very helpful. I teach group fitness classes on zoom and want to get rid of any delays. Is there a way to ensure that there is no audio delays with my mic and music? Also is there a way to hear my voice on a monitor (Kustom Pa)? Right now all I have is my music going through my Monitor as playback and no voice.

[@mgrassopgh]

Great video. What about adding an instrument into the mixer? To play music over Zoom.

[@kettnercreative]

You can certainly do that as well.

[@davidglabais4919]

is it possible to have playback through the monitors when using zoom instead of headphones without feedback?

[@IsraelHPerez]

Is this possible using just a celphone instead a laptop??? Thank You very much.

[@PeterD513]

Hi, Having the mic sent to your headphones is great for testing but is there a different setting for a hybrid meeting where you have a venue audience?

[@damuprudividamodaram675]

Sir, Can you please suggest , how to operate amplifier remotely with audio speak with mobile in remotely

[@LeticiaMDavi]

Thanks! Great chanel!

[@frankline.gonzalez-dwindt2355]

Many thanks for your video. Very easy to follow and well explained. Audio Interface vs mixer? What would you pick for zoom /teams calls and simple podcasting? Thanks

[@jaescobarlv]

I love your video extremely helpful now for my church we’re using OBS to stream to Facebook but we want to be able to use music for zoom and for Facebook how do we go about it?

[@rajeshshah6709]

Hi, Jordan. All your Video are very interesting and informative. I always love to watch and try to get some knowledge. In this particular video at the end you mentioned that USB knob red (line 9-10) shouldn't be pressed and leave up. I always keep it pressed. Does it make any difference? Please let me know. Thanks

[@EmpathsOdyssey-p2u]

Can I program any buttons to press & play/effects whilst I speak.? I. E So I can guide meditations live with sound effects? Also can this be used live and be attached to speakers /Bluetooth so I can do in person sessions ? Im after a gadget that works in streaming, Podcast recording and face to face.. .

[@sagarnikam1611]

Hi Kettner can u please explain me how to connect the zoom audio with sound mixer using my own 2 speakers with simple sound mixer? Also how i can utilize my existing mic for zoom meeting?

[@ksamant]

It was a Good Explanation to use the Mixer for Zoom through Laptop/Computer. What if we use the Cellphone instead of Laptop/Computer. What additional settings we have to do in the Cellphone. to connect in the Zoom Meet. I have tried many times but couldn't connect in the meet when using the cellphone. But didn't face any problem while using the mixer over Facebook Live or Whatsapp. Please do reply.

[@_tcdrums]

What USB are you using to connect the mixer to the laptop?

[@ewertongoncalves73]

Excelente vídeo, excelente explicação .Muito obrigado .

[@serenaho8676]

Hi, I was watching your Yahama connecting to zoom. It is very clear and helps a lot. However, I am also speaking to a class of 'LIVE' audience using a Mic connected to the same mixer. How should setup my mics? Some zoom participants complained that they cannot hear. What should I do?

[@kenethdelmundo8946]

This helpful ❤️ Hi sir how about in iphone?

[@preetamsingh5792]

1. Even if I don’t press USB push button I get then audio at other end of the zoom ok second device. 2. Something is working like a microphone. If My microphone is not connected and I move chair the noise of moving chair is received at other end. 3. Where go and control the volume. People at other end keeps comparing that my audio is not audible but I unable to increase in zoom. But the volume in my headphone is increased by phone volume. Is it that my MG10XU has developed a problem?

[@juanthebreathact]

HELLO, HOW ARE YOU? AND THANKS FOR YOUR BEAUTIFUL WORK, IS IT POSSIBLE TO USE THE EFECTS IN THE VOICE BY ZOOM CONFERENCE? Many thanks

[@Maryfio860]

Thanks for the link . In my case all the testing works fine . However whenever someone connects cant hear either side . What am I going wrong .

[@CharlieWalden]

Great tutorial. Much of what you're describing is no where to be seen in any of Yahama's docs. I've been using this mixing for my livestreams for months on the Big Fiddle Show, but now see it works for Zoom, too, with the two-way USB.

[@robertcbyrd]

If I want to record the audio from my Zoom session, do you have a setup for that?

[@5230116]

Hello, thank you for your video. I have a question,I can connect multi mic in the same time for meting room also I can use the speakers instead of headphones for the room to allow the audience to listen for the zoom meeting? Thanks

[@marutishetti1390]

What isthe price for AT2020 condenser mic.

[@sandeepkirtane9072]

How do we use this mixer for 2 way zoom meeting, Confused with Scarlet 2i2 and This.

[@BudandRoscoe1]

If I have 4 microphones will that mixer pick up all 4 of the mics on a zoom for a Podcast?

[@MrAnish007]

Hi great videos always...how abt settings for android phones ..zoom live and streaming through fb..thnks

[@warigiyatno6764]

Another great tutorial...

[@kettnercreative]

Thanks again!

[@samuelthiru3104]

I have Yamaha MG16 XU Mixer. Is the set up same or is there any other procedure? Thank you

[@alentertainmentproductions208]

With the given setup.... How would I setup a controller to DJ using the ZOOM platform?

[@ninjalightning2631]

Bro To me you are God sent, I love your videos I have a question though ! I'm a DJ I want to OBS to live stream but also I want to come out from Main speakers , how do I connect to PA system so my idea s also can hear what I'm doing? Thanks man you are awesome

[@kettnercreative]

There are a couple different ways you can do it. If you don't need the FX engine, you can use your FX send to go to an audio interface for your live stream and use your main output for your speakers. You could also use your USB output for the live stream and the main output for your speakers. The main stereo output can control the volume of the speakers at a different level from your livestream. So if your mix is the same, this could work as well.

[@jacknolish]

We run a "zoom & room" event with in person and zoom participants. I need to feed the zoom audio to the PA system. Which output should I use?

[@raphaelconcli9322]

Could you have this mic connected at the same time to a loudspeaker in an auditorium? I will have to set up a situation like this in a conference... On-site panelists speaking to a live audience and also to a zoom call, where we will have online guests and audience. We are going crazy trying to see how can we do this properly.

[@barryprofessionalmusicianc832]

How do i hook the mixer up to the computer? Thanks for the video!!

[@kettnercreative]

kettnercreative.com/audio-mixer/connect-audio-mixer-to-computer/

[@Akshaysaini825]

Hi, can we use the same system for the hybrid module where the host is using mike to speak and the audience who are in same room is able to listen to the host via speakers and same time audience who joined meeting through Microsoft teams or zoom can also listen to host?

[@ming-yichiang4487]

I have the same question! Thinking of doing hybrid zoom meeting but not sure the setup. My thinking is to mic into the mixer and output to speaker. Also there’s a line in from laptop to mixer so online audience can ask interact with people in the meeting room through speaker. Can the mixer reach this plan? Thank you Jorden for the detail video. Your video is the most clear setup and explanation I’ve found! It really answers a lot of questions I have for planning hybrid zoom meeting. Can you explained about hybrid meeting setup? Much appreciated!

[@astasuleo]

i know it is time consuming...but i would like to request if you could make the same video with Yamaha MG12XU. Thanks a lot for your time and help in advance.

[@sleep-inducingsounds2631]

Hi, can we use 4 mics simultaneously for a zoom call with this mixer?

[@iaminmusicministry]

Such a great video presentation. May i also use a Roland GO:MIXER PRO for ZOOM?

[@Indigenous_Patriot_1175]

Can I use that set up with a wireless mics system ?

[@ez-concretesupplyuniversit2712]

Thanks for the vid! I am having an issue with the mono/stereo button, I am unable to hear the zoom test ringtone unless I have the button pushed down to stereo, is there a reason why I would have this issue?

[@TsunaSetsu]

Is there a difference between using the line connection or the usb connection when it comes to connecting to a computer?

[@kettnercreative]

The line connection is an analog signal and depends on your audio card in the computer for the digital conversion. The USB connection is converted to a digital signal by the Yamaha.

[@electricwassabi]

Does the Yamaha Mixer output whatever's playing in the mixer? For example, In my MacBook I will play with my MIDI Keyboards Via logic. I will output the macs audio via 3.5mm cable to TRS cable into the Yamaha Mixer. My Microphone will also be plugged into the mic input of the Yamaha Mixer. My headphones are plugged into the Yamaha Mixer as well for real-time monitoring. The Yamaha Mixer is then plugged into my streaming PC which my Zoom is connected to. Will the audio output my audio from the Macbook?

[@carlajac]

Hey! I have a question If I play any music/video on my laptop, this sound was return on the Zoom Call?

[@pvsamorgan9803]

Hi, thank you for the videos. I have been learning a lot from your channel. I am a singer and planning get a compact usb mixer to use for live streaming. Out of the Yamaha MG06X and Mackie ProFX6V3, which one do you recommend? Also which has a better sounding hall reverb? Also I need to communicate with my audience. Which one offers the best options for that? Thank you for your help!

[@jilcosenza9673]

how about if we use speaker instead of headph0ne? and use instrument also like guitar. and how to connect mixer to computer?

[@donsotto11]

Hi can you used the Yamaha mg12xuk video conferencing?

[@userlast8631]

Is it possible to use all the effect (reverb, delay..etc) during zoom meeting with this setting? Or can I play acoustic guitar and add some reverb during livestream? Thanks in advance.

[@ehmil24]

Ive got this mixer and I tried to video recording using Iphone while playing guitar but the sound is not recording to the Iphone.

[@neotheek]

How can we integrate this setup to pa system (sound system) in hall while still being in online conference call? Or at least out the remote party audio to a speaker while not having feedback loop?

[@georgemosier9029]

That's something I've been searching for.

[@jamesniulesa4132]

@@georgemosier9029 did you happen to find the solution?

[@jhlconsultoresabogadosycon7381]

Thanks Broth!

[@kettnercreative]

Any time!

[@mightyraju7598]

You qre amazing bro

[@kettnercreative]

Thank you so much 😀

[@PrLuisArdila]

Let Say Im playing a song from my pc, but it does not go to zoom, what I'm missing? thank you

[@rdr5471]

hi laptop to mixer 2 way communication rite? then how to use studio speaker for hall

[@junkokinoko7277]

Thank you ! very helpful, can you please extend or show the proper settings inside the ZOOM parameters doing live music?

[@kettnercreative]

Sure thing!

[@HepsiAnchorbell]

Can we add music instrument

[@theishkid]

Can you also plug in speakers to play at the event?

[@kettnercreative]

Yes, you can.

[@simonlovechild]

hi im running a zoom meeting with 6 mics into mixing desk, and obviously external people on zoom call ,do i mix minus them or the callers coming in on zoom sorry if seems like silly question

[@karthikramaswamy4650]

Hi KC.. Thanks for the video. I just have few questions regarding online streaming. So we have singers who want to play a karaoke track and they have mics connected to it too. But they are able to hear the track and their voice through their headphones but it's not sending the signal on zoom. They have used the same settings mentioned in the video but I feel there is a routing issue. Hope you can share some light on this. Thanks

[@jediprestes]

Muito obrigado pela aula, me ajudou muito!! Thanks!!!

[@kettnercreative]

You're welcome.

[@LP00151987]

Hello Jordan! thank for a lot of information and i love my new mixer because of you, now i have a problem, microphone cant detect in my pc options i hope you notice my comment. thank you

[@kettnercreative]

If you're on PC, try installing the drivers from Yamaha, make sure your software is updated, and restart your computer.

[@andysvlogging]

Hey Kettner...Thanks so much for the detailed tutorial...I have one question..How to connect this mixer to Android phone for zoom meeting/facebook live ?? I mean what cables do I need for this ?

[@kettnercreative]

You just need a usb cable to connect to the USBC on your phone.

[@andysvlogging]

@@kettnercreative Thanks for replying... I am connecting the mixer with my PC ..thing is..I wanted to add an additional audio input that would come from my android phone...in that case what should I do ?

[@ManishaParmar]

@@andysvlogging Hello, I use a dual TRS to TPS cable so one end plugs into my phone for the karaoke track and the other two ends I plug into the 5/6 channel. Hope this helps.

[@andysvlogging]

@@ManishaParmar Hi Manisha...Thanks a lot for your response....really appreciate it....I am a newbie on this...please do me one more favor....can you please send me the product ( cables) link ?

[@dominicainesmissionnairesa548]

I have a MG12XU - not a MG10 like the one you are demonstrating from - and because of that, I keep stumbling on the fact that in the line 11-12 where there is the "Line-USB" button, down by the volume level button, I have TWO buttons, one a grey 1-2 and the other, the ST (stereo). If I understand what you are saying when you speak about the one red button beside the sound level that has to be in the UP position in your MG10 for the sound to go to the computer and back into your earphone, I still can't figure out what has to be up in the MG12; is it the 1-2 grey button or the red stereo button. Can you help me figure this out? Thank you so much!

[@hno.walterpollack8352]

Hi there, I have a question: With this stuff we do our homework (and I did a lot of times) producing our best audio for “zooming”, but does it worth it? I mean doesn’t zoom always do some audio degradation? Or maybe I’m wrong and all of this work that we do, can be listened (including audio tracks) if that is the case, can you teach us how to achieve it?

[@eyeshield21719]

Thanks for the tutorial sure, but How about if i wanna add Speaker ? Still it safe and no looping effect? What setting I should use?

[@brentnashbuan]

Dont use a speaker if ur using condenser bc that will make a feedback

[@wanahmadhezzamullah7144]

Hey Sir, can the headphones changed to a speaker ?

[@kettnercreative]

You can, but you risk getting feedback if your microphone can "hear" the speaker.

[@georgemosier9029]

Great video and explained well! One question - if the ZOOM call is duplex (having attendees both listen as well as participate), would that Mon/ST button be set how so that there isn't any feedback? We have the MG12XU and quite haven't figured that out.

[@sammy8081]

Did you find out the answer I too wanted to know I have mg16xu

[@m4uretromusic526]

What if I want to play the media through IBS for a LIVE ZOOM STREAMING - Do I need to KEEP the channel 9/10 to Stereo position and USB button pressed?

[@edenle1953]

Please make a tutorial how to connect Mixer MackieproFX16v3 to Computer (Laptop) & setup Drivers, Please.Please. Thanks in advance.

[@grant1133]

The AG06 has the loopback function , is that basically what the red stereo/monitor button is doing here? If for example you wanted to play a song over zoom from your computer audio , would you also be able to hear it on your end at the same time?

[@kettnercreative]

Exactly

[@__tee]

Hey, Are you able to do a zoom setup using a yahama MG16/4 please?

[@kettnercreative]

Yes you can. It's the same steps as this video.

[@restingpunkface1304]

Thank you very much for your videos. I’m a fitness instructor as well as a drummer in a band. I am awaiting a new iMac and have an old Yamaha mixer that we use for practice. I’m considering purchasing this mixer to teach fitness classes as well as record drums. Would you recommend it or should I get the adapters for our current mixer? Also, do you already have a video explaining set up for fitness instructors? - thanks again! 🤘🏻

[@kettnercreative]

Thank you for your comment. I think this mixer would work well. We've used it for plenty of fitness based events in the past. What type of setup video would you like to see?

[@restingpunkface1304]

@@kettnercreative thank you for your reply. I would like to use my wireless mic, play my iPod and connect a powered speaker for my audio instead of using headphones. I’m thinking I will be using ecamm through zoom. Thanks very much.