Shark Navigator brush not spinning fix.

Unplug before working on it.

[@Budabadaba]

I know this video is a few years old, but this fixed my problem today. I was doing a full up cleaning and refurbishing (new filters, brush, ext.) but when I reassembled my Navigator, it would red light me and not roll the brushes. I checked all the connections, made sure the unit was getting power, verified the switch was moving with the tilt, none of it helped. Did a google search and found this video, and sure enough once I bent the switch toggle into a higher position everything worked perfect. You just saved me a major headache stranger, it is very much appreciated.

[@shanfarm]

This worked!!!!! Thank you for taking the time to share this. I was so frustrated! Now I don’t have to buy a new vacuum cleaner

[@colbystudy]

Glad it helped!

[@bobparker425]

Your suggestion worked perfectly! Saved me either a repair bill or the cost of buying a new vacuum! Thanks do much 😊

[@townsray916]

I popped them wheels off the first time it was so dirty I didn't see the screws until I watched your video thank you very much for the insight.

[@delirious1029]

Just fixed my shark bc of your help, totally thought I would have to replace this part.

[@annawebb1552]

Just fixed my beloved Shark vacuum of over 10 years thanks to you! Saved me $200+

[@DNAatWork14]

It worked for red shark (n60?), do bend it the end of the arm (not at the bend) for better results. New filters and clean out the tubes from toy cars… works like a charm. Saving this vacuum from the dump.

[@williamlindsay3912]

You areca BOSS. Thank you so much.

[@nikkilovetheyardsale-again2608]

Thanks so much for your wisdom and knowledge i watch these videos because i do EVERYTHING you can think of and mever lnow when or if ill run across this problem. I mean i do EVERYTHING. Cars, trucks, houses, cleaning, animals, life, nature, nurture, basics and pro level. Everything and anything. Hvac, gardening, customers, buyer, everyrhing and anything so this is very informative and knowledgeable for multiple situations 😊 thanks again brotha

[@nikkilovetheyardsale-again2608]

I actually ran across this problem just last night. It's not only that piece but the 3 prong connector pieces weren't getting a gppd connection when I went to use the vacuum horizontally. Which is how you use a vacuum 😅 so... hope this works along with the extra work I've done...

[@lydiabone1615]

Thank you so much for sharing! I just fixed my Shark vacuum and saved us a ton of money!

[@margaretdale4098]

Can you make a video please showing how you got it apart and put back together.

[@StephRenee812]

That would had been helpful

[@theresamayton302]

Not what I was looking for, but I'm sure it will be quite helpful in the future. Thanks

[@elon6276]

perfect, thx!

[@nonenone702]

Thanks for the video, worked like a charm!

[@teresa6817]

Awesome Video & Thank you Also is there an “ Easy way “ on How to pop tiny wheels BACK in? Mine are refusing to go lol

[@colbymartin2439]

i can't remember and don't have the vacuum anymore. sorry!

[@piperofsimms]

I will try that. Thank you !

[@ShielaCannon]

I would like to know how to put the handle back on after taking everything apart to clean the roller on a shark strato, I hadn’t intended for the handle to come off but it did a part fall off and it just doesn’t look like it goes away. I know where everything else goes. I’ve almost got it back together, but can’t do anymore till I get that handle back in place.

[@chrispythebot]

There's a black button in the back of the vacuum and you can remove the cleaning head

[@debrab7045]

Thank you!! Worked great!!

[@mariaesposito274]

Bummer, I wanted to buy one but now idk..😢

[@martycorbin5004]

The. Need to know were the 2weights go in the head.

[@StephRenee812]

We have one the hose works just not the beater bar.

[@SantanaSam12]

The switch itself is actually not very expensive

[@waterlife.1905]

Its the stickers. You never took them off so it broke.

[@robertburns202]

Or 6gbp for a new switch

[@RobertRodriguez-lr5bv]

What the tool to use ? I have a true pet and L key won’t go Ik