Slicked out finish with a 14 air hole mini detail gun 😱🔥🔥 size matters

[@Mikefngarage]

Man you channel is growing fast. Honestly you have the best all around knowledge and information on spraying in all situations. None of those temp controlled booths, or down drafts....Just real spray work with real spray problems and real solutions without the fancy stuff. Even using cheaper guns to show it can always be done. Those Porphis guns seem to be a great high end option for the diy or backyard shop guy.

[@thetriggerman954]

@@Mikefngarage thank you Mike. I appreciate that man. And to think I waited 8 years to start my channel because the place was so old and I don't have all of that fancy stuff I didn't think I could pull it off. Until I finally said here goes nothing and embraced this old dinosaur shop for what it is, and it actually worked. 🙏🏼 THANK GOD!!

[@rafalcegiel6351]

Someone once said that there is something of art in painting, so we are artists.

[@northwestoff-roadopportuni7176]

@@thetriggerman954we all glad you did it 👏

[@thetriggerman954]

@@northwestoff-roadopportuni7176 😊🤎🤎🤎🤎😊😊😊😊😊😊😊

[@rstephens347]

Trigger Man. Who you kidding? You don't make mistakes when you spray doggs. You make it appear easier than it is. You flawless.

[@thetriggerman954]

@@rstephens347 it's that easy. I'm no magician 😉

[@bradsrestorations1085]

Great tip. Your finish speaks for it's self. No one can argue with that!

[@thetriggerman954]

Thank you Brad, it definitely helps I've been doing that forever. Saves time, material, money and could prevent a headache. 🫡

[@ARIASPHIL123]

Really helpful when you explain setting on gun.

[@thetriggerman954]

😎

[@tubbed68cuda]

I used this gun for the first time last weekend. It sprayed sealer, waterborne base coat, and 4:1 clear coat beautifully. Finish was smooth as glass without any cut and buff. It’s a great little gun!

[@thetriggerman954]

@@tubbed68cuda yes it is. I totally agree 💯

[@joewolf4483]

Looks like it would be worth a try ... nice little gun ... another video full of great tips ... you the man Trigger ...

[@thetriggerman954]

@@joewolf4483 thank you Joe appreciate you and your continued support 🙏🏼🤎🫡

[@vincentlong6528]

I fell in love with my Mini-Gun (Matco) years ago……!!! I use it all the time on small to medium jobs…!!! The Gun Slanger

[@thetriggerman954]

Yeah man sometimes they are actually fun to spray with if you're not in a big rush

[@Mikefngarage]

I like mini guns now....I hardly ever used one until recently. Man you can stretch a 1/4 pint of base with one of those suckers. Just wet bed with 2 coats of Blending clear.....and with solvent base dust on a couple coats with the mini and you use almost no materials. Blend out and your good. I just use 2 coats of the wet bed for sand scratch fill.

[@thetriggerman954]

@@Mikefngarage you can save on materials for sure. With a little patience you can go a long way with a mini gun. I prefer 1.0 - 1.2

[@Mikefngarage]

@@thetriggerman954 Yea the .8 just has too small a fan. I use a .8 to paint ATM surrounds. Because there is like no overspray. Whatever leaves that immediate areas is just dust and wont stick to anything. I am going to hit them up for one of these to try. the 1.0 is perfect if the fan is big.

[@thetriggerman954]

@@Mikefngarage I don't think you will be disappointed 💪🏼

[@travlite8496]

The narrative that you have to have every damn thing to do a basic easy paint job on youtube is getting comical my lord help these people just use the brain you were gifted with lol another great video Trigg!

[@thetriggerman954]

🤔 😲

[@odessahallmenefee]

That mini gun was nice!😊

[@thetriggerman954]

@@odessahallmenefee yes it was Odessa. You like them Mini guns aye 😉😁😁😁

[@odessahallmenefee]

😂😂😂Youz a mess!

[@thetriggerman954]

@@odessahallmenefee 🙈🙈🙈

[@byroncummings2952]

Great video Triggerman. Your personality reminds me of my late brother. Keep 'em coming.

[@thetriggerman954]

Thank you Byron, I appreciate it sorry to hear about your brother. He must have been one cool cat 😎🫡🫵🏼

[@jessekampegaard8491]

I've been waiting for this mini.

[@thetriggerman954]

Right on. Awesome little gun

[@mrbig7718]

I'd try it. Keep it small, keep it simple

[@thetriggerman954]

That's the plan!

[@ganeshnarayan5505]

Nice little gun Trigger.

[@thetriggerman954]

It's not the size of the boat it's the motion in the ocean 🌊🌊 😉😅

[@ganeshnarayan5505]

@@thetriggerman954 Have a nice weekend bro don't get to drunk.

[@nickcrill7718]

Cool that they make mini gun. I’ve done some larger resprays with a Sata 4400 mini jet 1.0 at work.

[@thetriggerman954]

@@nickcrill7718 I have that gun. Very nice gun as well.

[@nickcrill7718]

@@thetriggerman954 yeah it works well. I usually use it outside of the booth in a finished boat on the line where everyone is working. It’s a pain. You have to have a filter and fan set up. Low pressure so people aren’t breathing it.

[@davidharrison8397]

I've got an Astro pneumatic mini gun I use sometimes....damn thing sprays really good

[@thetriggerman954]

@@davidharrison8397 those guns last forever. Lol I have one I leave out for everyone to use I've had it since like 2004. Never dies

[@GregoryGreenSr.-vs4ot]

Awesome gun

[@thetriggerman954]

Yeah man I think so too

[@phillyairsoft6372]

Love the variety of guns you try out for us!

[@thetriggerman954]

Thank you man. Glad you appreciate the effort input in. Want to give you guys plenty of options from the cheap to the highend stuff so you can make an informed decision 💪🏼♥️

[@Chili_G_77]

Hey Trigger, thanks for the heads up on a mini. Was just about to start my search for one. I'm a DIY guy and need budget friendly equipment/supplies. I'm thinking this just might do...

[@thetriggerman954]

Welcome brother, yeah the gun is nice I've done a couple jobs with it now, very nice little gun. Especially on clear coat

[@dostuffchannel]

I just used a mini gun to paint door jams and firewall on my truck. Worked well with my tiny pancake compressor.

[@thetriggerman954]

That's what's up, they usually give a nice smooth finish perfect for a firewall and jambs. 💪🏼

[@benjaminchu6699]

TriggerMan is the man!

[@thetriggerman954]

🫡🫵🏼

[@Mark-um3hm]

Everything you do comes out mint!👍

[@thetriggerman954]

I appreciate that! I try man. I'm finally starting to get the hang of this painting stuff 🤠

[@northwestoff-roadopportuni7176]

We appreciate all your knowledge and willingness to share! Thank you 🙏 glad to see your channel growing well 👍

[@thetriggerman954]

I appreciate that!!! You got it man. More to come 😎

[@gregorylopez5063]

good knowledge to know to use the mini guns to work on 2k primer. flawless job as always

[@thetriggerman954]

@@gregorylopez5063 Thank you Greg I appreciate you watching brother.

[@gregorylopez5063]

@thetriggerman954 well there aren't many out here trying to school people on the knowledge of painting cars. Plus it's coming from a brothers and have to give u ur flowers on being impactful

[@thetriggerman954]

@@gregorylopez5063 🫡🫵🏼 and I will continue to do my part. ♥️

[@hidesertdave6166]

Like this info Trigger.

[@thetriggerman954]

Good, more to come 💪🏼

[@BryanMiranda96]

Looks like a nice little mini for doing things like trim and small blow in, ill stick with the DV1s though

[@thetriggerman954]

Yep yep if you got those there no need for anything like this. You got the top shelf there

[@jasonsummers1085]

0:02 hi trigger, New to painting, please explain what the wet bed is Thanks mate,great content

[@thetriggerman954]

@@jasonsummers1085 it's basically just a transparent base coat. It fills in any scratches that are left during your prep. It also helps allow your metallics to land evenly. Good for metallic blends. And you're more than welcome man. Anytime 😊

[@Frdad1982]

Love your channel ma friend,it could be good to see all your jobs unwrapped,ready to quit the shop,love from france ;) keep up the good work

[@thetriggerman954]

@@Frdad1982 thank you sir. Glad you're enjoying it 😊 unfortunately I cannot come in over the weekend just to unmask the car and show the video before they deliver it. Sometimes they deliver the car when I'm not at work.

[@frankvalencia9227]

Hey trigger love the videos man, binge watch almost everyday, hey man question-probably a stupid one- but how do you/your prepper prep around the door handles and belt moldings without removing them. That would really save me so much time I hate removing door panels to remove those dam door handles and moldings. Thanks man!!

[@thetriggerman954]

Hey Frank thanks man I appreciate it. I have my prepper to sand the blend panels with 800 then a 3M soft superfine pad. The pads have different levels make sure to get "superfine" it works great for clear coat. And make sure to use a wet bed. 👇🏼 www.amazon.com/dp/B000Q6RZWO/ref=cm_sw_r_as_gl_apa_gl_i_XPBBH9506RY90DRZEH3N?linkCode=ml2&tag=thetriggerman-20

[@deanbrown7643]

UK tech wins the day 😅😅😅😅😅

[@thetriggerman954]

@@deanbrown7643 🤓 that UK Technology is undefeated Mr. Brown 😉

[@89notch]

Appreciate the knowledge. Thank you

[@thetriggerman954]

You got it man. Hope it helps

[@89notch]

@@thetriggerman954 it seems common sense now but before watching your video I had not put it together. Thanks again for teaching the community

[@thetriggerman954]

@@89notch you got it man. 💪🏼

[@mississippiwrenches295]

Man dude that is a good idea I got to start using that mini gun more often that sealer went down so smooth and the main thing is it was a control spray 🔥🔥🔥

[@thetriggerman954]

Now we taking, save material = money plus makes the job easier 💪🏼🫡

[@mississippiwrenches295]

@@thetriggerman954 definitely for sure saving on material big time and again beautiful work that car was so slick

[@EJ1James]

I never ever used a mini gun but looks interesting for saving material guess I’m have to buy one morrree gun lmao 😂

[@thetriggerman954]

Noooooooo James. You better not 😅😅

[@EJ1James]

@@thetriggerman954 lmao 🤣 I won’t but mini guns do have there place I agree very useful!

[@wrightsrrt871]

Good video brother and glad to see your channel grow as time gose on! I also have an 1.0 touch-up gun for small stuff like motorcycle tanks and other reasons! The 1.0 won't spray metalic well though ?

[@thetriggerman954]

It will spray metallics but they don't seem to fall where they should. If doing a corner or some type of an edge I'll use the 1.0 for that for something directly in the middle of a panel I go for a 1.2 on a minigun. That has been my experience with them you'll always see some type of a little halo because the metallics just didn't land the way they should

[@wrightsrrt871]

@thetriggerman954 I dig it brother thanks and looks like I'm grabbing an mini with an 1.2 soon just another one for the collection!

[@wrightsrrt871]

@thetriggerman954 I was looking and the porphis dosen't offer the 1.2or 1.3 tips for there mini gun but was curious about if you tried the atom x16 mini gun it rants it's like iwata and they have the 1.2,1.3,1.4 for it but the cap has less air port? If you have one would like to see an 2 guns 1 cup on the two to see what's better quality cause there same price range lol if you don't have one im trying to request the company send one over for review 😉

[@ANDY-we7mr]

GOOD VIDEO SO A BLEND TRIGGER MAN PRIMER ON THEN BASE COATE PAINT OVER THE PRIMER AND THE BLEND ON TOP AND THEN BASE COAT PAINT AND CLEAR COATE PAINT ON

[@thetriggerman954]

You got it Andy 👍🏼😁

[@dannystables5512]

Go idea for the mini gun, I also liked your clear gun today

[@thetriggerman954]

Thanks Danny gun combo knocked it out 🫡🫵🏼

[@darinlewis9478]

Yea I would like to try one for the small stuff. I have the PRD 717 and have been very happy with that one For the money it’s hard to beat Porphis

[@thetriggerman954]

@@darinlewis9478 they do make some nice guns. Can't take that from them.

[@Sumkindawonderful]

Iwata split nozzle tech without the split nozzle!! I get it.smooth operators

[@thetriggerman954]

Yes sirrr

[@Sumkindawonderful]

@@thetriggerman954 I'm sure I've asked before, ever shoot waterbase?? Thoughts on it

[@guillaumel3640]

Okay that was awesome, very methodical approach. I appreciate a lot how you show how to plan out the spray like a plan of attack. I have to ask, because the spray pattern on the mini gun seems quite small, how tricky is it to spray with it? It seems like it wouldn’t be the most forgiving for a DYIer

[@thetriggerman954]

I plan to spray bigger jobs with it, from beginning to end. Lots of people use them in mobile auto body. To spray 1-3 panels with. Stay tuned bro, I got you 😎🤎

[@rafalcegiel6351]

Hello Trigger , I see that you only use light grey primer. I would use black and after sanding apply the base coat

[@thetriggerman954]

@@rafalcegiel6351 that's cool. One day I'll be as sharp as you man. I'm just working with what I have 😎💪🏼

[@rafalcegiel6351]

I'm currently using a phs 155, pretty cool gun

[@lukeowens3544]

You haven’t put your dv1 clear gun for wetbed yet?

[@thetriggerman954]

@@lukeowens3544 no sir. I use base gun for base and clear base coat.

[@lukeowens3544]

@@thetriggerman954 so your dv1clear just sits collecting dust? wet bed is the only thing it’s good for🤣🤘🤘

[@thetriggerman954]

@@lukeowens3544 yeah man it's sitting in a shoe box at home 😁😅

[@lukeowens3544]

@@thetriggerman954 dig it out and put it to use!! That’s one expensive paper weight🤣🤣🤣🤘

[@thetriggerman954]

@@lukeowens3544 I might be having a yard sale put it on the table $299.99 😀

[@JohnWD40TC02]

It's always good to see my man Trigger back in the lab👌my good friend (who I won't mention on here😁😉) has got the Porphis mini gun and he really likes it but I haven't tried one as yet, I used my PRD-717 for the first time today for basecoat and it laid it down really nice at around 22psi I can't remember what psi you used for base and clear with this gun Trigger🤔 The WS400 did a nice job on the clearcoat it gave you a nice finish👏I like my Series2 it's a great clear gun👌🙏👍John UK

[@thetriggerman954]

I know who you are taking about ( your friend ) no free promo 🤪 you're the man John. Glad you like the Porphis PRD-717. yes that series 2 is a sweet. Thank you for watching 😎🤎

[@JohnWD40TC02]

Yeah sorry for that Trigger, I actually didn't realise what I was doing by mentioning his name on here, I'll sit in the corner all day tomorrow doing the lines you sent me😂👍

[@thetriggerman954]

@@JohnWD40TC02 🤠🤠

[@treysterthepainterturner8404]

Oh shoot. Done brought the series 2 out. Yeah I use my Lph-300 for sealer and I’ll spray base and clear out it too but mainly for sealer.

[@thetriggerman954]

@@treysterthepainterturner8404 🙈🙈🙈🙈 yeah man snuck it in. Is the 300 still your maint sealer gun?

[@treysterthepainterturner8404]

@@thetriggerman954 yes. It’s been my main sealer gun since day 1 when I swapped paint systems.

[@thetriggerman954]

@@treysterthepainterturner8404 that's how you be getting that all that glass. I think I'm gonna use it as a dedicated sealer gun. It lays down sealer smooth af. I just be lazy and don't want to clean another gun 🤠🙈

[@treysterthepainterturner8404]

@@thetriggerman954 😂😂😂 it do be laying it down smooth as hell. But I’ve been using it since day 1 of my switch so.

[@mikechris8967]

Hi trigger. What kind of wet bed clear are you using presently. Thank you.

[@thetriggerman954]

@@mikechris8967 what up Mike, I use a ready to spray base coat blender/wet bed. It's a product by transtar here a link amzn.to/3zvXpIW

[@timhudson8958]

Trigger man how long would you wait for cut n buffing clear Acme FC 720 slow hardener. Temp in the shops 80-90. Thanks as always!

[@thetriggerman954]

@@timhudson8958 I'm not familiar with that clear. But if it's a denib probably the next day is fine. But if doing the whole car I'd let it sit in the sun for a few days. Let everything that's gonna shrink actually shrink then hit it. 💪🏼

[@ivayloivanov3010]

can you do it without wet bed? ;)

[@thetriggerman954]

Yes you can. But the wet bed will make it easier for beginners. 😉

[@haule8418]

what are your dv1 settings for color?

[@thetriggerman954]

@@haule8418 16 psi full fluid and a half turn in from open on the fan

[@awaddabit2398]

Hi sir, Your videos and explanations are fantastic. How much flash of time do you give for metallic and clear coat? Thanks

[@thetriggerman954]

Thank you Awad, I give 15 min flash with metallics, and 10 min flash with clear.

[@awaddabit2398]

Thank you, for your reply. Keep up your fantastic work.

[@stevek758]

For small bumper and spot repairs on car lots is this your choice?

[@thetriggerman954]

@@stevek758 actually my 1st choice is the Iwatas lph89 or the LPH 300. But this will do the job for less money.

[@stevek758]

@@thetriggerman954 Could not find the exact gun on Amazon. so many versions

[@thetriggerman954]

@@stevek758 I have a link in the description. It takes you right to the gun. And you select which size tip you want.

[@stevek758]

@@thetriggerman954 I see it now. Than you. Still confused with all these guns. Iwata, porpoise help🥹

[@stevek758]

@@thetriggerman954 Trigger how you doing out there in Florida? Is that Storm affecting you? Hope yall are safe.

[@nickcrill7718]

Why does trigger troll have a hummer? 😂

[@thetriggerman954]

@@nickcrill7718 I'm assuming that's just the vehicle he drives. 😂 Must be a big guy 🤷🏼‍♂️

[@phordguy]

I looked it up and it said 160L/min. That converts to 5.6 cfm.

[@thetriggerman954]

Cool 😎

[@phordguy]

Not much and would work great for a small compressor. Can’t wait to see you do a fender in base / clear with it too.

[@thetriggerman954]

@@phordguy I gotcha man coming up 🫡💪🏼

[@Smurf4460]

Ima need one of these on your next giveaway.

[@thetriggerman954]

Hopefully then send me out a batch for the next giveaway 😉

[@bovinejonie3745]

Awesome video. I’m new to spraying. Any gun recommendations for a $200-$500 price?

[@thetriggerman954]

Devilbiss Tekena/ prolite would be a good gun I personally like the TE20 cap that would be a good universal spray gun without breaking the bank.

[@bovinejonie3745]

@@thetriggerman954 Perfect. Devilbiss is what I was looking at. I’ll check out that model. Thanks a million.

[@thetriggerman954]

@@bovinejonie3745 you got it man. I think they are cheapest on spray guns direct.

[@bovinejonie3745]

@@thetriggerman954 You ain’t lying. Way cheaper than Amazon. You just saved me some money. Thank you.

[@rolandopinder3847]

I notice with my Iwata's the fans are too big, I have to wined the fan in a bet I get way better results.

[@thetriggerman954]

@@rolandopinder3847 in notice that more with the w400 I always turn those in 1.5-2 turns. The LPH400 runs fine at wide open. But you're right.

[@GregO-OG-61]

T-Man would this be a good gun for jams, engine compartment, trunks, and tight spots?

[@thetriggerman954]

@@GregO-OG-61 yes sir, it'll work for all of those tight spots, and keep the over spray to a minimum for you as well.

[@GregO-OG-61]

Ordered with the 1.0 tip. Don't forget the 5% discount.

[@thetriggerman954]

@@GregO-OG-61 I never get anything from them lol. It's all good. As long as you guys get the guns and are happy then it's a win.

[@trolllibtards2604]

Looking good…..

[@thetriggerman954]

Thanks for watching

[@abcardenas35]

What's the mixing ratio of you paint

[@thetriggerman954]

1:1

[@XusanShorustamov]

Supperrr❤❤❤

[@thetriggerman954]

@@XusanShorustamov 💪🏼

[@diggy561]

Porphis LCR

[@thetriggerman954]

Big up 🫡

[@tomwilliams954]

If you're not too far away I want to bring my truck for you to paint

[@tomwilliams954]

Triggerman how do I get you to paint my truck where are you located I never seen anybody lay down clear without orange peel like you

[@thetriggerman954]

@@tomwilliams954 hey Tom, I'm in pompano Beach FLA. Where are you located?

[@richardblanke5521]

No fooger

[@thetriggerman954]

No sir not on this one

[@kenn1989]

I've heard that you should always seal over 2k primer because once you sand the primer it becomes porous. So you sealing little spots and saying it's ready to paint is not the correct way. From what I've seen on KZbin.

[@thetriggerman954]

@@kenn1989 well if I'm incorrect do it the way you think is correct 🤷🏼‍♂️ 😉

[@luxe-kustoms]

Trigger is gonna be the next 1 hit wonder....lmao!! Just joking... Fresh keeping it real content.....

[@thetriggerman954]

I'm not going to be like your friend Sir mix alot I'm going to keep dropping hit after hit like MC Hammer I'm too legit to quit 🤪🤪🤪

[@johnwerner7194]

Looks like just $100. For another tool. Hell ya. Why not? 😮

[@thetriggerman954]

Another $100. Tool to make you more 💰💰💰 can't hurt

[@Gegsite]

Two trailer-park girls go ’round the outside / Round the outside, ’round the outside...

[@thetriggerman954]

@@Gegsite 😲😅😅😅😅 my man . What ha know about that therrrr

[@timhudson8958]

I don’t know how that hoods not loaded with runs and sags you hosed that thing down slow passes 80 % overlap wow , what’s the temp in the booth? I was wetting a hood down yesterday and a big glob of sweat dripped out my suit and ruined my perfect clear coat! I was sweating like a whore in church LOL !

[@thetriggerman954]

@@timhudson8958 it's about 95°-100° in the booth. And it was a 1.4 I know how far to push this clear lol. After almost 12 years spraying it every day we've gotten to know each other very well 😁

[@tomwilliams954]

Trigger man I'll pay you 5 grand to do my truck it's got a little body work and I got 2 new fenders to put on What do you say

[@thetriggerman954]

@@tomwilliams954 send me some pictures on Instagram. I will go from there.