So. Many. Bars.... More Progress on 25.3 Chassis in MY Cutlass! KSR Cutlass Build Episode 21!!

Chipping away at it, a little at a time!!
KSR Merch Available At:
www.WinWithKSR.com/merchandise
Check out the new KSR Parts website at www.KSRRaceParts.com
Build Inquiries, dyno tuning scheduling, or to purchase any of the parts that we use/recommend on any of our projects, fill out the “Work Request” form at www.WinWithKSR.com/work-request
For Advertising Partnership Inquiries, please email [e-mail]
FaceBook: / ksrperformancefabrication
Instagram: / ksrperformancefabrication
We love hearing from all of you!
#winwithksr
#winwithholley
#trzmotorsports
#holleyefi
#texasspeed
#circledconverters
#mickeythompsontires
#gearvendors

[@JBNL1972]

Sunday, KSR Cutlass Progress Day! Let's go!

[@thomasmattern8679]

I don’t know what it is about this build. I’m not a “drag racer” to speak of, nor do I have plans on buying or building a race car. But something about this build has me looking forward to the Sunday videos on this. I am a car guy, and like all sorts of cars and mods so on and so forth. But the capital and time to play with a project of this magnitude eludes me. Keep up the good work Kevin. Thank you.

[@StrokerAspen]

Awesome Work Kevin! You're the man!! Keep it up. It is awesome to see the Oldsmobile build, and the story behind it. My dad's Street car is a 1980 W-30, which he purchased in 88 when I was 1 year old. I don't know a life without that car being around!! It is still Olds powered as well ( not nearly as serious lol.). It is a 488cu in. Olds using a 455 block, and an offset ground factory forged 455 crank (yes they actually made factory forged ones!). He cruises it to Saturday morning coffee every week still, and it puts a smile on my face every weekend to see it roll up to coffee. As a kid, I would play with my lego in the back seat, my sister reading a book beside me, and mom and dad up front, driving down the high way 2 hours to our local track to race, with the slicks in the trunk. lol. It will never leave our family, too many memories!!

[@KSRPerformanceFabrication]

Aweeeeesome!!!

[@jameseastwood4984]

Great memories, I also have my Dad's car now.

[@GreggeSB]

Always a good day when there's Cutlass progress happening. I've been subscribed for several years now and always hoped you'd get her down and work your magic on her. Now it'll be a cold day in hell that I miss a Cutlass update.

[@TurboChicken313]

HELL YEAH. another KSR video. Another day to work on the racecar with Kev on screen in the garage with me

[@strykerentllc]

LOL that "past future previous day before tomorrow" stuff had us rolling, Kev. Really enjoying the Cutlass chassis build process as we have with every previous chassis build. Cheers!

[@JerGol]

Love to see it still coming together. It'll be so cool to see your own history back on the road and beating up the 1/4 mile!

[@TheChad138]

I'm really happy for Clay, new ownership has given him equipment that let's not only compete but beat the competition.

[@ryandunn5362]

Seeing the process is awesome. And I love Kevin's humility with the mistake. No one is perfect, but we can all be humble!

[@ajgenelin752]

The cutlass is going to be sick when it's done. Sunday tradition now, an ice cold mtn dew and cutlass video. We all make mistakes. it's all good, Kevin. Keep at it!!!

[@ronbuckner8179]

Yes , I did, and yes, he did. And yes you are. Let’s get to work!

[@midwestdave33]

I for one I'm glad it's not going to be another 10 years before the cutlas is done.

[@jeffjankiewicz5100]

FYI, been subbed to Clay and KSR for years. Clay is my NHRA Ambassador, very cool guy.

[@BrickNewton]

It's Monday morning, Cutlass time. Time for coffee and Cutlass action.

[@saddletramp6529]

It is Sunday fun day! Future, past, present...now I'm confused on what day it is!! Is this video about TIME TRAVEL?? Love this build and again thanks for taking us along!

[@SevinSyn]

Always helping my OCD with your evenly timed videos haha

[@BacklashTV-gu3rc]

Being a fabricator, it's very interesting how you go about these cage rules.

[@bbreaux24]

I look forward to the Cutlass videos every Sunday. Love the detail you put into building cars!

[@billpotmesil]

Tell Eddie to drive carefully on the way back as you edit videos! It was great to meet you both in Indy! If you don’t charge him mileage for the opportunity to drive you, at least make him stop and buy snacks! Sorry it was a tough weekend, but it was great to see Soccer Mom in person.

[@jeffausbun]

What a perfect freindship you, Clay, Brent at PFI and others have. Great peeps on you tube are hard to find... Well Done Clay!!..Wont comment on the Indy 800 yet..

[@rockercover]

2:23 Good reminder about thin metal used in vehicles of that era. (Realize how vulnerable one can be at higher speeds - *if crashed).*

[@Mister510]

You can put four bender clamps on the tube at the start. Doing so on a flat surface keeps all four bends on the same plane. A bonus is you can then easily put the tube back in the bender in the exact same spots if you wind up needing a little more angle. I'm getting ready to order a Rogue M625 bender and have been watching all their videos. Thumbs up for the halo bar style cage, it's the strongest design if you take a hard hit to the front corner of the roof.

[@jamessawyer4625]

its really nice to see the project getting action . looking good.

[@davidowen888]

Sunday Funday ! My brother had a buick like that 😉, v6er with the weird oil pump, back in the 90's he blew it up after I changed the weird oil pump wasn't my fault a week earlier I did the same job on a customer's car 👌

[@terryboone6746]

I love to see the Cutlass videos. I've been an Oldsmobile guy for more than 30 years. Mine are all 68-69. I absolutely can't wait for your Olds to get it's Olds engine. Props to you!

[@KSRPerformanceFabrication]

My second car was a 68 Cutlass S. I wish I had not sold it!

[@iwikeu]

Kevin when you gonna build Cleetus's 5s big tire car?

[@ftcentrepreneur]

Kevin, I used to play basketball and one thing that I learned, and taught the rookies when they had off days was, No one shoots 100%. Not even Jordan. (I'm old 🤣). Point is... You and your crew are still the Sh**! You do awesome work and are good people. Life happens and thank you for sharing the up's and down's. 🙂👍

[@aaronb7990]

3:00 as a Californian, that's a Florida thing. I can leave metal in my garage, and it doesn't get surface rust. Maybe after a few years, some will start to form on truely raw metal. Either way, at least it's not Canada. First time I experienced a truely rusty car from Canada it blew my mind. Every single thing that was metal was rusty. Under the hood every nut was just a ball of rust.

[@Tony82607]

Cutlass is getting a little closer all the time. Good work

[@dmrhodes4829]

Continue the good work on the cutlass! Sunday-Funday with KSR

[@Katifda]

Enjoying the content, watch it every Sunday after church. I bought the pay for view, but missed the race, it seems they don't support my server in Tahiti. Actually the past and future is really simple, if you've ever watched a parade you have already experienced it, as you stand beside the road you are seeing the now, the present, the floats that you are presently watching passing in front of you will become the past as they go by and the floats that are behind the present are the future floats to pass before us. Our daily lives is a future, present and past experience. Yes, our future experience has to come before our present experience, before it becomes a past experience.

[@stuartclifton7395]

I’d love to come down and spend a couple of weeks watching and learning how you do your work

[@riddlemethis01]

I love watching you work on your Buick on a Sunday morning while I work on my Chrysler.

[@Living_EDventures]

Oldsmobile

[@KSRPerformanceFabrication]

Hope you have a good time working on your Jeep!!

[@riddlemethis01]

@@KSRPerformanceFabrication Touche 😁

[@dannmohr5721]

Sunday Sunday Sunday Sunday Sunday………Kevin and KSR……. Is it Cutloose or Oldsmobubble day……..🤔🤔🤔🤔🤔let’s go with both…….and take it away Kevin…….👈👈👈👈👈👈👈👈👈👈

[@earlrichardson385]

Cutloose needs to be this car’s name!

[@mikehipperson]

Nah! It's a Booick!

[@edwinvane70]

I love the way you build. Nothing is Done without thinking it over 3 times.

[@carry45calsw]

Another Sunday video on the Cutlass. Look forward to these! Even tho tomorrow is Monday.

[@gafrers]

KSR Cutlass FTW

[@n.leeball3049]

Really enjoying watching this car come together. I hope that it is turning out the way you want it to. You have the skills and the resources to build something special here that can be a great advertisement and display of what KSR can do for others.

[@jun1977i]

Cutlass sunday!

[@johnwelch2084]

Kevin it’s coming along nice!!! Ready to see the funny car cage being built!!!

[@kevinbauer8261]

I wish I lived closer to your shop. I would have you build a 6-point for my car. I am always impressed and appreciative of your attention to detail on every project you work on.

[@KSRPerformanceFabrication]

Thanks 👍

[@2low78mjones8]

Yes yes and more!---------YES!!!!!

[@Kindaquick1]

Shout out to Eddie for being available on Sundays.

[@ChillFactorProducts007]

Sunday Fun day Summer heat is on its way . What an A/C shop nice. I need to look into that

[@MCC70SS454]

At the end there talking about the Indy 800, I was really waiting for a Spaceballs quote…”when will then be now? Soon!” 😂

[@BassManBobBassCovers]

Such an insane number of bars, but it's getting executed so well! Looks great and the quality of work is top notch!

[@KSRPerformanceFabrication]

Much appreciated!

[@02f4irider]

The tube you messed up on wasnt a waste. As you said there are pieces of it you can use and who knows, it might be the right bend for another car. Also its a great learning experience no matter if you have done this for years or just starting.

[@billpewterbaugh2982]

Thanks for sharing the Cutlass build videos.

[@Squintz45]

YAY Cutlass Day!

[@user-hi2ev7ug4l]

Just the way to enjoy Sunday morning breakfast....taking in the Cutlass build....good content and thanks 🔧👍

[@KEIFabrication]

I actually cringed when you made the last bend because I thought it was in the wrong spot. I hate when that happens! Take a real man to reveal his mistakes! Appreciate your honesty. Thanks!

[@teedermcdribble]

I live in Michigan and sometimes I have to hit my remote start just to find out what pot hole I'm parked in. Thanks for the great vids.

[@Spudstrodamus]

Ill never build my own cage but im really loving the cage videos.

[@Bluswede]

@KSR Performance & Fabrication Regarding your discussion at the end of the video about the KZbin time warp: I'm a fan of older 'Moody Blues' music...So this concept didn't injure me a bit, it only took me back to their 1967 album, "Days of Future Passed". "Nights in White Satin" was the hit from that album.

[@timothyyingling8298]

Love the work and the knowledge that you put out in your videos. Keep up the great work

[@charlestorruella8591]

Past present future doesn't matter as long as it gets done and you film it we will all watch it love learning all I can from this channel

[@UpshiftGarage]

Love the progress on the Cutlass .... my Sunday is going awsome i just picked up a 396 block to bore and stroke for my El Camino

[@ontheberm]

Looking killer, Kevin!! Badass work as always!!

[@Jeffrey-ed8sz]

Wow, past,future existentialism too Kevin? You cover all the bases on your awesome channel. I love it.😊

[@deefa_damo]

@KSRPerformanceFabrication - try to find set of dark Neutral Density (ND) filters (or a multi-stop ND filter) of the right thread to be able to video the welding close enough to study the weld pool.

[@Chad-lx2om]

It's a ksr kinda day yes yes yes 👍

[@wizzardzx]

Can we know more about the Ford in the background? Love your Sunday video's helps me get threw the day.

[@blksrsil]

Kev, hot tip, the red square around the thumbnail makes it look like we've already watched the videos. Might be an idea to switch to a different color

[@drjeep1971]

Thank you for the video. Slow but sure progress.

[@ronbuckner8179]

I wondered about putting a bar on the passenger side down to that hook some 5 -9 days ago (I don’t remember when, but I really did). The background noise is mine.

[@asmrhead1560]

30:00 on the dot. Niceeee

[@michaelwynne4346]

Kev I'm glad to hear you talk about you keeping your toe in the Dating pool.

[@greggsvintageworkshop8974]

Great video Kevin and great work! Sounds like the tubing mistake just shows you are human. I do crap like that all the time! Like you said, you can use most all of it elsewhere anyway.

[@cadebarton2227]

Honestly can’t wait to see it done 😊

[@ericc.6940]

Yay more tubes🎉

[@InnocentMiscreant]

Sometimes there is no mistakes only an education

[@riverdragonmarineservice441]

Excellent

[@Ammoniummetavanadate]

Filming welding: I bought a cheap auto darkening filter off amazon and tossed it into a metal box. Hot glued it into a window in the box. I put a piece of plexi on the outside to protect the filter I 3d printed the bracket for this but you can just glue or tape it. The on the inside I just glued down a go-pro mount at the correct height. I control it with the app. You need the box to be sealed for light since reflections on the back side of the welding filter will bug the camera out.

[@Hoaxer51]

Sounds like a good idea without spending a ton of money, someone like Kevin could knock one of these out in an hour or two.

[@Ammoniummetavanadate]

@@Hoaxer51 Yep, and you just toss a 1/4-20 tapped hole on it so you can put it on a tripod.

[@censored1360]

My body guy says my 70 442 is going to be done in like 3 weeks cant wait to get it licensed and go cruising

[@throttlewatch4614]

Tough break at Indy but crazy amazing race

[@troyadams1076]

Great job 👏

[@dragpix]

fixed shutter speed/iso on a camera (cheapo phone works well) with a shade11/8 lens stuck on the front of it works mint for recording welding

[@user-rt8ik1ow4i]

Thanks Kevin

[@huntsoramma]

slick bender

[@CrazyQbin]

Hell yeah looks great

[@michaelmeyer1384]

Maybe the future or it maybe the past Have a great week.

[@pimpedpga]

You could cut a piece of glass shade, could be a shade 9. Attach it over the lens of your go pro

[@nukedogger86]

That was some Doc Brown Back to the Future 4th dimension mind mess at the end. lol.

[@dannmohr5721]

So you have to be multi flexible and limber…… to weld properly💥💥💥💥💥💥💥💥💥💥💥💥💥

[@BlueCollarBachelor]

Check out Jody Collier. He does the best welding videos. Your car is coming along great!

[@stanleymartin1613]

Cool stuff. Enjoyed watching ✌️ 😎

[@lunkydog]

I've always known the mill finish on 4130 as "pickling".

[@laurenceschnieber5370]

That's not bad considering the humidity it's the Southwest My metal roof rains when it warms up on the NC coast

[@mikecoyle3680]

There never mistakes bud simply R&D 😉

[@Dossy88]

Always love these cutlass videos. Keep up the great work Kevin

[@user-df9rw6mz2x]

Cutlass Rising can't wait to see Steves car and yours ready for the track should be some epic racing moment , great 800 even if you did not win it was a crazy finish .

[@vehdynam]

Thanks for the video , I always learn something, and nice to know I am not the only one that makes mistakes(lol) .

[@Spudstrodamus]

I love cutting and grinding lol. Although it does make a huge mess and your arms end up looking like you have a disease with all the little red dots

[@randallmason9687]

We used a thunb control, and a mirror to weld the tough spots. A little practice, you will pick it up quick.

[@andye7389]

Interesting. I liked your program for bending. As an electrician I get the winging it part. After trial and error the more you do it you don’t have to measure as much. Of course I am talking bending conduit. My teacher in apprenticeship bent his own roll cage for off-roading. It was dom didn’t need to meet any race rules. I always wanted to bend my own for my early bronco. I bought a rollcage about 5 years ago for a wedding present to myself. Maybe some day.

[@travisestep3031]

The Cutlass is looking good! Keep up the amazing work

[@michaelstevens676]

All that talk about the past and future. .you need to start building DeLorean 's...lol

[@tomscustomshop]

I’d have messed that up way more than one bend 😂😂😂😂

[@briananderson5284]

Awesome love the Channel !! keep up the Amazing Work. You and Team are one of Best in the business !!!!!

[@ackilbits]

Let's go!!!

[@CeeCeeOy]

Hey Kevin, supriced ghat you didnt know that Baileigh TN-250 tube notcher will notch in the middle of the bend. One of my very first Instagram post is how to mod one of them to perform even better. Keep up the good work and posting videos.

[@KSRPerformanceFabrication]

My bender will notch in the middle of a bend, but it will not notch a tube to fit on a curve…

[@CeeCeeOy]

@@KSRPerformanceFabrication I'll tag you on IG. Take a look what I came up for that.