Starting a 3D Print Farm? Is the Flashforge Adventurer 5M Better than the Bambu lab P1P!?

[@jmcrafter2668]

I had two AD5 Pro for about 6 months but I had too many issues, like failed homing (where it made really loud noise), bad overhangs, bad adhesion. After that I switched to a P1S (with AMS) and it works like a charm. I also love the ease of printing from the Bambu Handy App.

[@JakeWeihe]

Weird. Well the P1S is more expensive so it better be a better printer

[@michaelnoardo3315]

this video is sponsored , we need to start to be able to tell when it is a real review or sponsor, bambu is more reliable

[@JakeWeihe]

Did I say it was a review? No. Everything on the Internet has some level of bias. And I use over 25 Bambus.

[@michaelnoardo3315]

@JakeWeihe for me it is clear bias, mainly when you mentioned the size of the Patch cords, something that costs 2 $ should never be used as comparation

[@echoliu2431]

My 5M Pro works great, as evidenced by the sales on Amazon, I think🙃

[@design8studio]

Great video, and I agree. These AD5M printers are amazing, and the cost is also amazing! I have two, and just bought a third one that's on the way.

[@SandeepSingh-43]

Thank you for that review. I have a relic Creality CR10 that’s just takes forever to print. This was a great start into 3D printing. I am ready to move into an upgrade. I use the Bambu X1E at work. This things a great. But now seeing the Flashforge printer, the pricing is budget friendly over the Bambu Lab x1C. I’ll give the Flashforge a shot. Can you do a Timelapse between the Bambu and Flashforge to compare print time. Is the Flashforge just like the Bambu in regards to calibration and bed leveling?

[@TheSlammerFishing]

Do you sell any of the stl files from your website? Im interested in the Hart cleats but need multiple sets for a project and have a 3d printer

[@SupportNoob]

You can use orca slicer instead of orca flashforge, they even recommend so

[@SirTodd]

so all in all and everything considered, would the m5 pro be worth purchasing vs the x1 carbon? I understand there is a big price gap, but for all things considered outside of pricing... is the m5 pro just as good as the x1 carbon?

[@jamespace2567]

With this many printers what brakers do you have?

[@harrymeskin2822]

Do you make a Hinged top for the Milwaukee PAC out crate box

[@firebloomstudios140]

There is currently only 1 chinese company which should be considered as innovative and disruptive company. For sure its BambuLab. The others want to offer the same package as Bambu but cheaper as the chinese mostly do. I don´t want to have the tenth Bambu clone, as these machines aren´t reliable. I moved from my PrusaFarm straight to BambuLab printers and i have 38 now. Mix of P1P´s, P1S´s, X1C´s and 3 A1 Mini´s . I had a lot of printers in the meantime and running in addition 4 FLSUN T1Pro and 4 RatRigs 500 and I can say the best and most reliable "higher consumer" printer is Bambulab. Now with the PrusaCoreOne you really have a great competitor but I am fully in Bambu right now with all the spare parts etc.

[@something_made_of_ice3362]

Should I buy the 5M or 5M Pro right now, or rather wait to purchase the AD5X?? I’d like to have a new printer by Christmas.

[@JakeWeihe]

I don’t think the AD5X will ship before Christmas. If you want to save money get the 5M. If it’s still in your budget and you want the enclosure and filtration- get the Pro

[@something_made_of_ice3362]

@@JakeWeihe Thank you so much!! I really want a printer that is efficient and is quick. I’ve been researching and deciding on whether or not to get a Bambu Lab, Flashforge, or even a Creality printer. I currently have an Ender 3 V3 SE and it’s quite slow and has been having some issues. This video and your comment have been extremely helpful and informative towards my decision on what to choose!!

[@stevenreynolds2580]

Bought AD5M pro returned after 4 days worst Flash forge printer i have had and I have 2 Adventurer 3 , 1 Adventurer 4 A Guider 2 pro and a creater 2 Pro The Ad5M pro was noisy vibration was awful and constant filament problems. nothing but problems from start , bought Bambu Lab A1 with AMS lite printed non stop for 3 weeks not single fault suck a difference in quality,, shame becouse flash forge were so good in the past, my other machines print without problems, hope they get next model right,

[@jmcrafter2668]

I had a similar experience with FlashForge (from my previous comment): I had two AD5 Pro for about 6 months but I had too many issues, like failed homing (where it made really loud noise), bad overhangs, bad adhesion. After that I switched to a P1S (with AMS) and it works like a charm. I also love the ease of printing from the Bambu Handy App. Team Bambu Lab

[@MasterMarkito421]

@Jake Weihe Husky Build Out has released drawers!!!!!

[@JakeWeihe]

👍

[@slimjim7411]

I have a couple of flashforge resin printers and I find other than learning a new slicer, they just work with no issues excluding self inflicted ones.

[@lgm8114]

5m was $240, and pro $360, few days ago

[@algisberziunas]

Where?

[@mikihay]

Lcd protect is screen saver

[@TheFunesk]

My p1s destroys my flashforge adventure 5m in every way. Software, build quality, performance, and end product. Plus the ams actually let's me use the whole roll. Waiting on an infinity loop to do that with the 5m

[@neto_FPS]

"destroys" good joke, you can't use a normal printer, just bambu's

[@3dprintropolus]

Also its twice the price

[@JakeWeihe]

Exactly.

[@NoMercyFtw]

These printers are the best bang for your buck single color printers out there but not the pro in that price range you might as well go with a Q1 pro

[@JakeWeihe]

I’ll have to try that one out one day. My Xmax 3 is not very reliable.

[@NoMercyFtw]

@JakeWeihe The Q1 Pro is probably one of the best printers I have ever used

[@JakeWeihe]

When did it come out?

[@NoMercyFtw]

@JakeWeihe sometime last year I think

[@googleslocik]

@@NoMercyFtw Didnt it have a lot of problems and part replacements or something? That for sure dosnt sound like "best printer" material .