STICKY XBOX ONE TRIGGER! (Quick and Easy Fix!)

The step by step process on how to fix a sticky trigger on your xbox one controller!
Items Needed:
1. Rubbing Alcohol
2. Q-Tip/Cotton Swab
3. Flathead Screwdriver

[@MisFitStudios]

Make sure you guys Like and subscribe! All the support really helps us out!

[@isokakashi8434]

Bro I cannot thank u enough

[@MisFitStudios]

Happy to Help!

[@thexbat1247]

My doesn't stick but after I click the my button the action of the button keeps activating example: after I aim in cod I will keep aiming. Will this help fix it

[@hyphema]

My right trigger doesn't stick it comes up but the action sticks like I click it once and it keeps "holding it" down.

[@valor9643]

Thanks bro it helped

[@gorem8]

4 years later still useful, the hardest part was to take the cover off. My rubber was actually falling apart, not just dirt. Now it is louder but unsticky. Thanks

[@AFCAglory]

same

[@Young_Ronin]

Wait my pad is gone, but still sticks can I still fix the stick issue ???

[@AFCAglory]

@TheKiddAqua you have to really clean it well, especially the narrow spots. I did it with a q tip and hot water

[@baukekilleryt1992]

same but i got this one 1 month

[@Boodoo4You]

@@AFCAglory For anyone else reading this, if you don’t have access to rubbing alcohol, you can use a very small amount of cologne sprayed onto a Q tip. Most colognes/after shave/eau de toilette are about 80% alcohol so it will remove all the sticky residue very easily, and it will smell nice too lol. Just remember to go over it with a dry Q tip after to remove any excess.

[@Quasidono]

Thank you so much! I was literally considering buying g whole new controller but now I don't have to. Much appreciated!

[@MisFitStudios]

We are happy to help! maybe check out some of out other videos and leave a Sub if you like them.

[@PeterGorla]

Yep, saved me $60!

[@CR-ph6vd]

@@PeterGorla Literally

[@Smorgasvord]

Thats now how you use the word "literally".

[@daree2954]

No problem bro

[@davidgonzales8882]

I’ve been playing with a sticky trigger for almost 2 years! Thank you for this, didn’t know it was this easy of a fix!

[@ShivanshFunVideos]

Same here

[@adityajha4696]

No way it was this easy. I thought it was something like stick drift where you gotta buy a new controller. Saved me 40-50$. Thank You.

[@brandonsommer1111]

This is a fantastic fix! I had a super sticky trigger and after learning the advice here, tried and immediately saw the results. Overwhelmingly fixed and makes my favorite controller usable again! I highly recommend this method to fix sticky triggers. Thank you!

[@MisFitStudios]

You're welcome!

[@e1even.]

This actually worked! Thank you very much! PSA: when rubbing the rubber with the Q-tip do it slowly without applying too much force because mine got slightly scraped but worked despite everything.

[@Andy-ux3hg]

Let it be known you an absolute legend! Had a sticky RT on my Series X controller. Back to normal now! You're a biblical beast 👊

[@555becs]

like a springy sticky sound?

[@MGrey-qb5xz]

@@555becs yeah that's not fixing , get a new controller or live with it if you can't repair it via shop

[@ice319]

AWESOME! Thank you for this! I just got back into Forza Horizon 4, and my right trigger is sticking like crazy.

[@steflo4544]

Lmao you and me both add me

[@camdenolson9031]

Same but with the Lt

[@AKTANEARCADE]

This was exactly what I needed. To be honest, my little pad had a little part where the trigger had basically dug into it (too much holding down RT in Trackmania) and so the rubber kind of gripped the trigger making it stick. I just kind of reformed it a little with a screw driver and sort of cleaned it up. seems better now and now I know how to fix it, thanks!

[@DJ-vx9gl]

Thanks for the suggestion! My controller had the same issue. The rubber was sticking onto the trigger edge. Applying a little tape fixed it.

[@danielfangzheng9724]

trackmania is unplayable with a sticky acceleration

[@cme64]

I thought I needed to disassemble the whole controller to reach the pads. you saved my time, thanks!

[@FabrizioLazzeretti]

i love when explanations are easy and quick. thanks i was wondering if i had to buy a new one.

[@znaderman5760]

first time one of these videos actually helped me out, without taking 5 minutes of pointless talking. short and to the point thank you.

[@jamal5514]

I did this and it worked perfectly for like 1 month and it got sticky again. I ended up removing the small pad that the trigger hits, now it never sticks and it’s been months w/ no problems. Thanks

[@francescobassi3244]

I’m in your situation. Every time i clean it after a few hours it sticky again. You removed that little rubber under the trigger?? Thank you

[@broken414_]

i Did it too and now im worried if it might casuse problems because that pad stops the triggers from damaging that part of the controller

[@dougman066]

FUNNY STORY: so my left trigger was sticking like crazy during a battlefield 1 match, so in my head I thought “oh it needs to be greased up”... all I had on hand for some reason was personal liquid lubricant so I poured a few drops into the crack of my trigger. It worked for about 5 minutes till it sealed up completely and that’s when I came to this video. After literally two minutes of following this video it started to work flawlessly and I haven’t had an issue since. You’re doing gods work my friend. 😂

[@alexiluffy216]

lmaoo, profile pic checks out xD

[@mattcrib]

Am I the only one that thinks it's absurd that I have to disassemble a NEW $50 limited edition controller (first-party) to fix a manufacturing defect? This is PRECISELY why I bought a Microsoft branded controller and not a cheaper knock-off. I expect this to happen with a third-party knock-off. I've had this controller for less than a week. I bought it to replace a lightly used "official" Xbox 360 Windows controller with a faulty right bumper (little button above the trigger). The 360 controller also had a squeaky control stick on arrival too. This is the last Microsoft hardware I'll buy. I should have spent my money on a Razer or Sony controller. What a joke.

[@MisFitStudios]

No I think this is a very common consensus. Unfortunately companies take risks leaving defects such as these. But then again they might leave them to push more products (conspiracy haha) I hope our vid was able to provide you will assistance and if you liked it maybe you can check some of our other stuff out and Smash the like button and Subscribe. None the less have a great day!

[@dieglhix]

@Music Anime pc games work with controllers

[@Berserker006]

What's really stupid is continuing to buy them.

[@Kingsservant83]

I felt so stupid after fixing it with such a easy fix, You saved me from buying a new controller. Thank you so much. Also subbed.

[@gregorybentley5707]

Fixed my sticking trigger quicker than the actual runtime of this video due to your instructions. Thank you sir. I'll eventually have to replace the trigger pad, when opening it I noticed they put the trigger pad on a bit crooked, so sometimes when pressing the trigger down hard it'll make a slight sound like it's hitting plastic and not the rubber trigger pad which is because it doesn't hit the entire thing when pressed down due to them sticking the pad on almost on angle. I didn't want to adjust the pad because there's adhesive on the bottom, I'll wait until it get worn out more and thanks to video it'll be a cheap and quick fix vs buying another 69 dollar controller.

[@Young_Ronin]

Where can I get a trigger pad? Mine is completely gone from cod and forza

[@davidscolnic9359]

@@Young_Ronin u find out

[@palomino11]

My brother! Thank you for sharing! I hadn't played my Xbox in a while and firing up my beloved F1 game was very troublesome with the accelerator stuck down 0.5 secs longer in corners - ruining every lap haha (laps are bad anyway tbh). Thank you for taking the time to record a concise and helpful video - you are EXACTLY what makes websites like KZbin so great!

[@xXSpringXx_]

Thanks dude!!! I got the Elite 2 controller for Christmas, and the Right Trigger was stuck, and I was considering on taking it back to get a new one. Thank you!

[@MisFitStudios]

You're welcome!

[@Hawkdown67]

Yo, how did you take apart the elite series 2? I'm having the same issue as you

[@xXSpringXx_]

@@Hawkdown67 You do the same thing he did in the video :> You just gotta take the front cover off, and put rubbing alcohol behind the trigger

[@hawaiian-cerveza]

@@xXSpringXx_ you didnt run into glue problems? Im watching a tear down and they had a hell of a time taking it apart.

[@KwakenAction]

Had this same issue with my new xbox series x controller, I got enough alcohol in the loosen the pad a used a pry tool to push it back flush. Works, now she's a clicker! Click-it-click! Thanks for the video!

[@KwakenAction]

@@TruTube.1. ended up taking it totally apart and just removing the rubber pad, also replaced the top shell with a soft touch. Much better now.

[@krishhkarthikeyan]

Thanks a lot Bro. I didn't use rubbing alcohol and just cleaned it with my hand but it still works great. I play a lot of sim racing so this fix helped with everything !

[@rankramer127]

Haha, i came here because it fucks up my gear shifts 🏁🏎

[@davidpendock6481]

....maybe it's bad luck on my part. But I think this is the first time in maybe two years I've seen a guide, that's direct, clear and easy to understand, the exact solution to my exact problem. And worked the first time. Thank Misfit Studios.

[@andresestrada6191]

I tried doing this thinking the trigger was just sticky, but when I opened it it I found out A little piece of the controllers little white locks actually came out and got stuck where the trigger was, so I got it out and the problem got resolved

[@kennethheasley4028]

4 year old video still being useful! My warranty for my 20 Year Halo system just expired and I have a sticky trigger now. Going to get some alcohol and do this now! Thank you!

[@VladimirYashayev]

Thanks for the video. My 2 weeks XBOX One controller right trigger has started to stick for no reason. Despite of the warranty your video worth a shot. Took the plastic off, and cleaned the pad with 70% alcohol I happened to have. It seems that the small trigger pad is not the exact size as the trigger plastic, therefore a small pieces of the pad are getting cut by the plastic and the glue is passing through. Did it for the left trigger as well in case. So far so good.

[@TheTotallyNotMysteriousGuy]

This actually helped, and I'm so happy because my controller only comes with the halo 20th anniversary series x, so the controller is impossible to replace. Thank you, truly.

[@ThaBeatHunter1987]

My pad is 2 weeks old !! Terrible quality control from Microsoft. I’m gonna have to try this, thank you for making this video sir.

[@surfjayce]

SEND IT BACK

[@surfjayce]

SEND IT BACK

[@coldfusion1787]

Trying this 2 years later, and worked! I didn't have rubbing alcohol, but had a glasses lens wipe and achieved the same thing. Thank you.

[@yesbb123]

Hi guys, If the problem persists after following this, try just peeling off the pad with a flathead screwdriver. You should never experience a sticky trigger again (just a slightly noisier one)

[@kunot99]

I use the controller for my PC. That did the trick. A few minutes of effort, then back to gaming. Thank you much!

[@thegodpopper8934]

Same problem on the series s/x controllers. Took one apart but the rubber receiver under the trigger had fallen apart a bit. If you use a straw on can of wd40 and very gently spray as little as possible in there it does the trick as well as they’re quite hard to pull apart :)

[@RyanDell-uy7iv]

I can't begin to tell you how thankful I am for this, so my xbox elite controller, a 130 dollar controller did this and now it's fixed. I thought I was gonna have to buy a whole new controller! Thank you again!!

[@itz_Metaa]

Damn bro I was considering buying a new controller, but you're a lifesaver!! Thanks

[@garypowers8195]

I was getting ready to just buy a new controller....again. Your video helped me save it! I did end up breaking one of the little clips that hold it in, but only one, so it is fine. Just watch out to other trying, be gentle with the cover. It is just plastic, remember. Thank you again!

[@MisFitStudios]

Great to hear!

[@stoops417]

Great fix! My little rubber pad started to come apart as soon as I started to rub it. I either used too much rubbing alcohol, or more likely in my case it's just an older controller with a breaking down pad. No more stickiness either way though, thanks!

[@cookingrice4977]

Weird, mine did too but oh well

[@markfritzlen3927]

Wow! You werent joking when you said it will feel like that cover wont come off! I thought something broke when it finally popped off but everything was good. This fix worked perfectly!

[@lincolnshearon]

I used an alcohol prep wipe, works just as well or maybe even better than a Q-tip dipped in rubbing alcohol.

[@MisFitStudios]

Good to know! Thanks for sharing this tip!

[@leocornaro]

Huge life saver, you saved me from buying a new controller, thank you! This works everyone!

[@PreacherMan1971]

First of all, thank you so much for making this video! My Elite 2 controller was having the same problem. After I saw your video, I noticed that the back of the Elite 2 is different from the standard Xbox gamepad. I didn’t want to break it, so I took your advice; by sticking a q-tip behind the trigger with rubbing alcohol and it worked! Thanks for showing the source of the problem. God bless you. Peace ✝️ 👍

[@jd15374]

Awesome, 5 years later and this solved my issue. Thanks for the video!

[@ThomasPrimeCCR]

Thanks! This happened already with my series S controller. Didn't even need to pop off the back though, just swabbed the edge of the trigger with a small amount and then used the trigger a few times and it worked its way in.

[@ThomasPrimeCCR]

If anyone tries this, make sure to allow it to dry before turning on the controller

[@ronniehyatt206]

Happened to my Xbox series x controller

[@xavier2166]

what did u use on the swab?

[@MikeLAslade]

@@xavier2166 I know that this is old but you wanna use isopropyl alcohol 91% to that's usually the strongest you'll find in local stores but I want to get the strongest you can find

[@mohsakhaii]

I fixed my Xbox X controller trigger with the help of this video, I'm so grateful.

[@visveshnarayan7964]

I have the XBOX ONE X Project Scorpio Edition controller and I obviously didn't want to buy a new one as you can't get the Scorpio Edition controller from XBOX. My left trigger was having the same problem and was super annoying every single time I played a game. This helped a lot.

[@MisFitStudios]

We are glad to hear this worked out for you!!! Please consider subscribing and checking out some of our other videos!

[@LeonDEpro]

Same problem, same controller, same color of controller even. You’re a life saver. THANK YOU!

[@WNTN-cn6dn]

This helped me get a price of plastic out of my trigger, thx.

[@NotPointForward]

Good video, straight to the point without annoying intro and stuff. My problem was that the rubber was falling apart so I just removed it. It is just sound dampening anyway. It's glued onto the plastic, so make sure to remove the glue as well. I used a tooth pick for that. Also a small tip, a .50 BMG casing worked like a charm for the initial prying of the panel open.

[@mercedesescobarmusic]

lol, thanks for the tip 😅

[@JC-jy9lm]

Cheers dude, my rubber had come off and was wedging between the tricker. So I just had to pull it out. With how the clips are on the pad you're better to pop the top of the side like you did, then do the other side at the top as there are more clips that side. Ultimately I'm sorted now so thanks for the content

[@muffcabbage9742]

Hey im still having a slight stick not nearly as bad but taking the rubber out has that caused any problems or any noticable changes?

[@JC-jy9lm]

@@muffcabbage9742 Just take it out, all it does is you can hear the plastic on plastic when you hit the trigger, such a minor issue that doesnt bother me in the slightest

[@chrismurphy4907]

It worked!!! Like Quasi-Dono below, I too was considering buying a new controller. Thank you!!! One word of note though for the viewers. If you do not have rubbing alcohol on hand, DO NOT USE NAIL POLISH REMOVER! It is too strong and will start to erode the black pad.

[@atma3425]

Amazing! It helped me, and it was fixed in 2 minutes. Thank you.

[@shamram321]

Works like a charm! This saved me from buying a new controller so I thought I'd 'buy you a coffee' instead. Thanks man :)

[@MisFitStudios]

Thank you so much for your support!

[@MarioSellitti]

This works. Unfortunately the cause of this problem is that little pad that they put at the base where the trigger makes contact with the main controller housing. That little rubber piece breaks down over time, and the fragments are what's causing the sticking. When I opened mine I saw that The little pad was almost completely worn down. This should be a recall and Microsoft should replace our controllers. Because now, my controller makes a very loud clicking sound every time I use the trigger because it's making contact plastic on plastic and that little pad has worn down to nothing. Perhaps we should start a class action lawsuit. Or perhaps Microsoft should just do the right thing and fix these for us.

[@mrdzin1209]

Thanks, you saved my controller. I used to just spray tons of WD Contact Cleaner in there every week because I don't want/know-how to open it up. Didn't know it just this simple.

[@hameaumusic]

Hey! Thank for this tutorial, I thought I was supposed to open all the controller and do more complex stuff but I just follow your steps and my problem is fixed! Dont worry about thinking you are going to break it, the plastic its really hard and It won't break.

[@MisFitStudios]

Glad I could help!

[@Emily_M81]

still a problem this many years later lol. you're doing the Lord's work.

[@djblack2938]

Thank you so much I was playing Warzone and the trigger kept getting stuck and it cost me a win.

[@amandaoftheyear]

Lifesaver! I thought I'd have to buy a whole new controller and I love mine lol

[@Ripply0]

this happened to me with my elite 2 controllers and I have a warranty and all but my controller has to mess up during quarantine and I can’t take that part u took off cause on the elite 2 it only has 2 parts that are the back and front Update: the triggers seem to be less sticky now since I've been using the same controller for while now

[@mr.bilbobaggins3753]

i have the exact same problem. let me know if u find a solution

[@hyrulehestu857]

Same problem

[@That1randomguy92]

Same problem so annoying

[@ljjayyy]

Your still saving controllers up until now bro 😂👏🏽👏🏽 just rip the little foam bit out controls abit louder when u pull the trigger but it WORKS

[@robertlilly1751]

Thank you very much. Mine was doing the exact same thing. Now it works like new.

[@MisFitStudios]

Glad we could help you out! Maybe if You could check out a few of our other vids and hit the Sub button that would help us out alot!

[@GenoppteFliese]

Nice fix, my rubber came off completely when I used some hand desinfection solution, but the louder sound is no way as annoying as the sticky triggers ... Unluckily I bought a new controller and stored it until warranty was over only to find out that it has a sticky x button, so I have to use my old controller. I have to watch some "sticky button" video now ;)

[@junkbot2.1]

perfect, i suspect ill have to do this again at some point but it was easy enough.

[@mckay91095]

BTW If you don't have Rubbing Alcohol, I find that a mix of Half Vinegar and Half Water does the trick. Thank You for this Tutorial!!

[@julianpace6177]

I just got this controller and since I press it a lot it’s already sticking hopefully this is gonna help me

[@GreatRnB4U]

Thanks Man! I was about to buy a new controller. Such a simple fix! You just saved me $60.00 I appreciate it. Thanks again!

[@deaconstrutton8498]

This is going to really help me play better at rocket league thanks

[@deaconstrutton8498]

Mostly because my controller triggers always freeze up

[@MisFitStudios]

@@deaconstrutton8498 we are so happy we can help!

[@deaconstrutton8498]

I think there was a lot of excess plastic that got inside so what do I do about that

[@NoobTelevision]

Love this! Thanks for the tutorial. Super easy fix for a common problem.

[@mangostain]

Thats weird my controller is new has the exact same problem only after playing continously rocket league for 2 months-3 months (i dont play other game)

[@fiazmr]

You saved my day, for me a part in the spring joint got worn and had to put it in place with the help of a thick paper

[@springtrapdemon8103]

Thanks my trigger was stuck 😊thanks for showing me

[@RAMBOLOGY]

Thanks for pointing out the problem. The alcohol trick worked for a while then the sticky trigger came back unfortunately. Just decided to just use thin cuts of scotch tape and just cover the pad entirely. Ended up working for me. Hope that helps anyone else.

[@MisFitStudios]

Thanks for the tip!

[@AbouFitness]

4 years later and this still works thanks

[@triczz4765]

Omggg this is no joke init this is acc such a gd video man cant even explain cheers pal

[@thelegendgamer33]

It's like well good innit

[@smokegrenade0548]

I got a new controller for Christmas and was terrified when the trigger started doing this thank you very much :)

[@MisFitStudios]

You are very welcome!

[@payamprojects2194]

Thank you so much. I have xbox one s controller and it solved my problem

[@MisFitStudios]

Good To hear that!

[@eorhalmighty]

Untill i found your video i was going about the wrong way, i tought it was sticky inside so i started rubbing the part where it connects with the circuit board and it did nothing, frustrated i kept searching and i found your video, i actually did not think that just rubbing @ where u showed for a few seconds will solve the problem so easely, bless you!

[@isokakashi8434]

1:00 take cover off, 2:34 pad thing rubbing alcohol, 3:22 cleaning the trigger Need rubbing alcohol, Flat head screwdriver, Q-tip

[@MisFitStudios]

I hope these help everyone! thanks for doing this. If you have time check out some of our other Videos and maybe leave a like and subscribe!

[@Hungrybird474]

Huge help . Works . Er side came off easy . Started messing with other side but it didn’t need it and it wasn’t coming off as easy as the other . Thanks a lot ! It works !

[@abrahamdelrio8074]

Thank you so much if it weren’t for this video I would’ve been struggling 🤒🥵

[@MisFitStudios]

Of course! Maybe check out some of our other videos and leave a like and subscribe.

[@realnarwhal]

the issue on my controller was the little black rectangle came loose and was sticking to the controller, what fixed it for me was opening the panel and putting the sticky thing back in it's spot, thanks for the tutorial! and hopefully this doesn't happen again 🤞

[@lachlanwalter745]

This was so helpful and saved me from buying a new one cheers

[@ree4ermadne55]

Just saved me from getting a new remote!!! (I know this comment is probably super common) But seriously, thank you!! I subbed because of this🙏🙏

[@MisFitStudios]

Glad I could help!

[@lucasstephens5003]

After just two days with my Series X, the right trigger started sticking. When I was trying to clean it with alcohol, the pad came loose so I just removed it, but then I was stuck cleaning up so much glue... Now I got a trigger that doesn't stick, but clacks because of no pad... *sigh*

[@MisFitStudios]

you can replace the pad! Just cut out some foam or rubber and re glue it where the stock pad was.

[@captainjacob7523]

Lol same story for me.

[@justharver897]

Same

[@josuerivera4385]

Mine is out of place i might have to replace it with another pad as well 😔

[@ChrisDaytrader]

Did you find a pad replacement that stops that annoying click ? thx

[@6fhawk]

Thanks for the video. I'm not doing exactly the same fix, but your video did help me to see the spot I need to spray with WD40. And Now it is fixed!

[@valiantthor_]

This helped me out heaps man cheers

[@MisFitStudios]

glad we can help!

[@technicaltapir9741]

Thanks! It helped - I had to remove the old rubber which was completely worn out. I have placed a double-sided Tesa tape leaving one side shielded. Works nice and silent.

[@unused131]

So basicly some lube and a que tip

[@AndrewMalkin]

Thanks for the fix! The rubber pad on mine had actually come off of the controller and was stuck to the trigger. I actually like the feel much more without it now.

[@hmoham]

Thank you, I was playing human fall flat and ecause the game requires you to press the triggers for so long both of them got stuck, You'd think MS would have found a solution to this issue by now, they just need to replace the pads with a material that can absorb the impact of pressing the triggers down, but don't get stick, it can't bethat hard right?

[@armyowens990]

like metal just like the 360 controllers

[@PyroVox]

Thanks for making this video. The pads on my controller were pretty worn, so I just removed them. The triggers actually feel better now with the more solid click, and they're only marginally louder (though maybe that's because the pads were already deteriorated).

[@mun123keet]

Well, I can't do this since I'm using the Elite Series 2 and this will void my warrenty.

[@valor9643]

Xrixten well then just bring in the controller if you have warranty

[@timothyluithle5666]

Yea me too

[@San17_]

THANK YOU!!!! I was so frustrated with this issue but i just realized that it was caused by some pqd being sticky! I thought the trigger cracked or something. Thank you! I just subbed

[@-phantazm8949]

All i had to do was the first step and the trigger was unstuck lol

[@MisFitStudios]

Well glad it helped!

[@JAM_2024]

Thank you kind sir! You saved me money and frustration. It took me less than a minute to get the plastic cover off and fix the trigger. I used a flathead screwdriver and a qtip. Thanks!

[@kermetliptontea9535]

Thank you hydrogen peroxide helped to

[@MisFitStudios]

Awesome! We are happy it helped!

[@jldavis1919]

Still relevant for new series x controllers. Thanks for the in depth vid!

[@raydenrecollet4125]

"Alot easier when your not recording" what do you mean? It's not like your doing this with one hand

[@WNTN-cn6dn]

It's alot of pressure to do it when you know people are gonna watch.

[@calvintony2929]

because he needs to make sure the controller is within the camera frame

[@matt1240]

This was super helpful, thank you! i was struggling to figure out from other videos how to remove the panel without breaking it but this method worked for me!

[@skylergorham9155]

Awesome! This help!

[@TheArkspark]

Thank you. I watched 15 seconds of this video and had my controller fixed in another 15.

[@juniordalton2021]

I can't get mine to open

[@MisFitStudios]

hmmm, what part is it getting stuck at, its a little difficult just may need to get some help to muscle it open.

[@kankhy]

You sir just made the world a better place, thank you kindly

[@MisFitStudios]

Glad I could help

[@kankhy]

@@MisFitStudios I might need your assistance here again buddy. I fixed the trigger sticking at the bottom with your help but It’s also sticky at the top with the inital press. After i press it It’s not sticky at all but if I put the controller aside for like 30 seconds or so It’s sticky again. Do you have any fix for that? I would appreciate very much, thanks in advance!

[@MisFitStudios]

the top side of trigger requires you to separate the case of the controller. It is tricky but can be done. You just need the right size of tamper proof torx bits to get it open. And there is a hidden screw under the battery sticker as well. Once you get the controller open you will see why it is sticking at the top. Could be from a laundry list of causes. From debris to something sticky like food lol

[@kankhy]

@@MisFitStudios it was caused by the little plastic cushion thing next to the button, i removed it and the stickinnes is gone. But I did something wrong in the process because now my controller doesn’t vibrate lol. My triggers vibrate though, just the controller stopped vibrating. I checked the rumble cables see if there’s anything wrong, doesn’t seem so. I can’t figure out where the issue is :(