STOCK 302 Mustang w/ NOS! IS Nitrous That Good? 30 YEAR OLD NOS KIT

[@Neomustangs]

Make sure you hit that sub like and bell for notifications! Feel free to comment below !!

[@NorthRacing]

My buddy has a 92 notch with same setup as you and runs a 100 shot ontop of his supercharger but he has 24lbs only difference

[@NorthRacing]

I run a 175 wet on my bone stock motor . Runs great so far

[@jameyrichardson8967]

Nitrous works GREAT as long as it's used correctly. Can't believe you've never run it before. Cool part that everybody forgets is that 100 hp shot also adds about 150 ft lbs of torque instantly

[@Neomustangs]

Well we ran it but mike ran it in my blk coupe. Never drove it. Was an auto.

[@shitbox7413]

Oh yeah nitrous makes big torque, lots of fun. 😁👍🏻

[@mustangmatt1987]

Oh God yes it's the torque! Used to work a dyno 20 years ago and torque at the wheels was crazy!

[@88TRUNKBACK]

After having huffed it at the dentist for years I learned why it’s really called giggle gas, shit can make you smile in more than one way. We were bad filled two every time 20 lb bottle for Friday night and a 10 lb for the way home

[@Neomustangs]

hah

[@droppedf100]

I love that kit. I went from 12.90s to 11.40s in a 4300lbs truck with it

[@Neomustangs]

Nice !

[@modelman8139]

Exact same kit I had back in 1998. It was my very first nitrous kit I owned and installed on my '91 hatch. Car was stock bottom end, had gt40 upper/lower, edelbrock heads, b303 cam, 24 lb. injectors, 70 mm tb, pro-m mass air, 3.73's, t-5. It ran 11.20's way back in '98. Man, I miss them days. Oh by the way, you can jet that kit to 175 h.p. I know "nos" only recommends that particular kit is good up to 150 h.p., but trust me it will flow more.

[@Neomustangs]

Thx for info !

[@vinmandich7756]

We turboed a 91,92,or 93 Taurus sho back in late 90s the only thing I remember about that car was changing the shifter and linkage from my memory they were definitely a pos set up for the shifter we machined a bronze bushing for it and installed factory new linkage and shift tower it was a pain in the ass once we got the fueling sorted that car was evil

[@hayaboosta]

Ran this kit back in the late 80s. NOS 05115. Worked great! Then bought it again a few years ago for a single call out against an SRT Jeep and ran a 175hp shot (Upgraded shims for the solenoids) on the 19lb injectors and stock 5.0 AOD & 3.73 gears. At mile high strip decreased ET 2.25 seconds and 18mph through the traps. Of course I hit it at 2k rpm but with 6' timing, 91 octane with octane booster and this kit increasing FP......never an issue....... Back in the early 90s I ran nitrous with a poweradder, I used a 40hp wet shot on a VW 1.7L Rabbit with a T4 turbo at 10psi.......worked well and actually added more HP than the rated jets....and fixed the nasty turbo lag.....LOL!! Looks like a possibility of some exciting videos coming our way....

[@Neomustangs]

Yes sir !

[@jpp9846]

That's awesome 🤣 "Supercharger, Nitrous, Speed Density" 💪 Interested to see what it does at the strip

[@Neomustangs]

Yes sir

[@jesseworkman4418]

I've been looking into a nitrous kit for my Fox body. Thanks for the info and update on what it can do.

[@arturo5819]

My first nitrous ride I forgot to put the jet in, boy was it fun!

[@Neomustangs]

Haha

[@micahbrown8259]

I just subscribed I have a 2017 Mustang gt that I’m putting nitrous on. I like any Mustang with nitrous

[@Neomustangs]

Welcome

[@joeyvoyles5548]

Cousin Fred looked scared as s*** he look like it was about to pop off a 500 shot

[@Neomustangs]

Hahahha I edited him saying he was gonna hurl lol

[@erikturner5073]

Nitrous has alot of upside. The kits don't change. Can't say the same for turbo or supercharger kits. Either companies have gone out of business or kits get discontinued. Nitrous is my preferred power adder.

[@shitbox7413]

I have a full ten pound bottle that’s been sitting for probably 2 to 3 years, hopefully it’ll still be good when I get around to using it. 😄👍🏻

[@Neomustangs]

I hope so!

[@fo5103]

I ran this kit on my first LX....good kit on top of my Paxton sn93. 75 hp shot.

[@Neomustangs]

Nice

[@StLMikie]

Ol Fred was looking like a nervous Nelly! If I’m being honest I don’t like being a passenger either. Not even in my brides car. I’m paranoid AF!

[@Neomustangs]

Yes me too

[@neilduncan8657]

I have my swapped 5.0 in my 84 datsun s12 with T5 R200 lsd 3.15 (soon 3.9) Haltech controller has gt40 heads intake considering adding a wet kit my car weighs just shy of 2700 lbs

[@SILVERBACK69]

Looks like fun 🔥Just found your channel today. 👍

[@Neomustangs]

Welcome !

[@brokentoolgarage]

Nice. My blurry camera issues is usually from oil/grease on the lens. No idea where in the shop that would come from.

[@Neomustangs]

I dunno either.. maybe from wiping it too much ?

[@Spad68]

Lol . My OCD kicked in when his elbow was on the top flat part of the fender . I know how easy it is to leave dents on that area .lolol

[@Neomustangs]

Ya I say it all the time

[@thaddeuswilliams4235]

Put a wet kit on and the charge pipe back on, we had one setup like that.

[@Neomustangs]

Thinking about it

[@gordonbaliles2389]

Love to see what it would do with the super charger plus nitrous .

[@boostjunkieMike]

Looks like a fun experiment

[@Neomustangs]

Should he

[@seanraymotorsports2960]

That video and seeing your reaction sold be bro I’ll be getting me a dry kit soon I’ve been kicking it around for awhile but if I can squeeze a 12.9 out of my stock block fox with some juice that’ll satisfy me. Can’t wait to see the eat difference between both setups. 💪🏻

[@Neomustangs]

Thanks me too.

[@henryros3432]

Cousin Fred 😳 lol. Enjoy your channel. keep them coming

[@Neomustangs]

Ty

[@bryanroupe8646]

Hey man tell your buddy to make a channel. I would sub. He seems like a cool dude. Keep it rolling man.

[@Neomustangs]

Cool thx I’ll let him know

[@jakejohnson3523]

Great video!!!!! Omg... Great video!!!

[@Neomustangs]

Glad you liked it!!

[@seanraymotorsports2960]

What’s up dan the man.. I forgot did you ever run your dads car in the 1/4 with nos? I’m in the process of getting my motor rebuilt had to be bored to a 306. Old crank was shot so basically all new stuff to make it right and getting. A 3 angle valve job on my gt40’s and he’s rounding the inside where it meets the piston.. as you know it has a ridge he’s shaving it down to make it a another way to breath/exhale.. getting 1.6 adjustable roller rockers keeping the B cam💪🏼. Along with new injectors and fuel pressure regulator.. should be quiet spicy.. he told me it should be I’ve. 300hp to the crank..can’t wait to get it all Together and take it down the track... with a 100 shot I hope to be a coyote killa.... I know it’s a Ford Mustang but I like to be the underdog and make them think their going to smoke me and show them that old tech is still the shit...

[@Neomustangs]

Ya it put down 11.65 with 100 shot

[@seanraymotorsports2960]

@@Neomustangs I think I remember seeing that video now.. were you spraying off the line also...? T5 was probably crying if so😆

[@hotshothogger]

I love spray. Been an addict for a decade now. Never forget my first ride in a spray car. Immediately bought a kit when I got back from the ride. Mine is a carbed 331 with a 125 9n a plate. Does the computer sense the lean condition and add fuel to the injectors automatically with a dry efi kit? No programming?

[@Neomustangs]

No tune. Just the vac from kit

[@hayaboosta]

Yea it uses the restriction of vacuum to the FPR to increase the FP to at least 80psi.

[@crixoceruto8936]

@@Neomustangs may run out of injector (19#'s?) with that dry kit + little boost

[@barryreeves3203]

A 306 with a flat top cast pistons it does have valve reliefs cut in them how big of a cam can l go with would a 512 lift work or should l stay under 500 lift ?

[@fordtech2282]

Hello Dan/Neomustang what seats are you running in the white car and where can i get a set? Thanks

[@Neomustangs]

Pro Car by Scat. They are sold at Summit Racing. Have to get lower brackets too.

[@fordtech2282]

Neomustangs, thanks!

[@saleen88-049]

You should put those 19lb injectors on the wall when you finally upgrade....

[@Neomustangs]

The point is to do it with 19s haha! yes trophys

[@patrickf4692]

@@NeomustangsVery well engineered Kits....These kits were VERY popular and user friendly, vastly improving mixture, and just plain work.....literally.bolts to the car with no other modifications needed (bigger fuel pump-colder plugs maybe) as it's a wet kit that "plumes" the mixture of Fuel and Nitrous below the plenum-- WAY closer to the valves, and bypasses all the 90° bends that cause those embarrassing Nitrous backfires that blow off your hood--common among the cheaper single nozzle kits that are known for forming puddles of fuel in the plenum...It doesn't require high fuel pressures or huge injectors to send Fuel separately like the dry kit..... Having said that.....the NOS 5115 is easily bolted on and is a proven, durable, and idiot proof design with multiple safety features... I didn't need to retard the timing at all at for the fixed 80 HP shot. You will love the plate kit...

[@chriso6640]

And that's why its called giggle gas 😁

[@Neomustangs]

Lmao

[@sweetassugar2076]

How much nos are you going to use ? Besides all of it 😂

[@Neomustangs]

All of it (100 shot)

[@19jody72]

"What" 😅😅😅👍

[@Neomustangs]

lol

[@sambert96]

Typical Ford dude missing gears on someone else's shit

[@Neomustangs]

Haha good one ........