Stripped Shower Handle - Delta Monitor 1700 series

[@ndgrover]

I'm going to do a little more surgery because my hot/cold are reversed but this look inside the device was very helpful.

[@berkleybrown7997]

The video gave me the right steps to solve my problem. Thanks dude

[@earlschmidt7818]

Thank you for the video as I have that exact faucet , and need to fix a leak.

[@zbplumbing647]

The o-ring goes over the bonnet nut and prevents water from goin into the wall and directs it out the front so you know that it's leaking. That's what's preventing the handle from goin all the way on.

[@HelpMeOutVideos]

Thank you for the tip! That makes complete sense. I moved the o-ring and will update my video. Question- there is a groove on the bonnet that looks like a perfect spot for the o-ring, but the sleeve won't pass over it (not enough space). So I put the o-ring just behind the groove on the bonnet, and it went on fine. What do you think?

[@zbplumbing647]

Yep that's right

[@dianareynoldsllressentials3543]

Any thoughts on why the temperature handle won't move- stuck on cold. Bought a house with this faucet.... just checking before I call someone. Thank you!

[@anniebee6215]

Thank you so much for your helpful video!!! It saved me from having to call the plumber! You showed me how to do a simple thing that I was able to do myself.

[@gregorywerner289]

I have a similar handle, but the screw that gives me the problem is the one that keeps the end of the handle on. That won't stay screwed in and it is hard to rotate the handle. Don't even know what it is called or it is not one piece

[@brianu33]

Our screw won’t budge. I guess it will need to be drilled out. Any thoughts?

[@tonycamillo7171]

Very helpful sir. Thank you so very much

[@mitchellkarr]

What is the cartridge component?

[@emmanuel7899]

I just install three of those and one of them the hot water is is in the cold and oposite im pretty sure I have to cut the ceiling and change the water lines

[@queenie713]

You just saved my day❤️

[@loridemann6699]

Thanks so much! This was all I needed and you have a new subscriber 😉

[@hicktowncustomz]

Very helpful! I didnt have to replace the faucet! Thanks

[@futfut1]

you needed to tighten up the philips screw only.

[@narendrapatel1332]

Lika