Suzuki Gsxr 600 Offroad Crosskart Part 6! Ultralight Inspired

In this video I cut up the rear of my crosskart and attempt to swap a suzuki gsxr 600 engine in, with over 100hp! Can I pull this swap off? You will see why I changed my mind and decided to go 4 stroke instead of 2 stroke.
Thank you for watching!
🔴 Big thanks to Swagoffroad!
Check them out here: www.swagoffroad.com/
The DIY tubing bender kit I used:
www.swagoffroad.com/SWAG-Weld...
🔴 Check out my HTP quality affordable welders here: 800usaweld.com/?ref=hvpoab1dg65
Thanks to ‪@Vtuned‬
🔥Follow on Instagram: / vasilybuilds
👕New merchandise: teespring.com/stores/shopvasi...
For all inquires email me vasily1fab[at]gmail.com
Want to contribute financially?
/ vasilycustombuilds
www.paypal.me/VBabeshkov
🎵 Music used from www.epidemicsound.com/referra...
Song names in order:

[@VasilyBuilds]

Big plot twist ladies and gentlemen! Hope you enjoy

[@mikkel1249]

never weld while bearings are mounted kid you´ll just ruin them

[@matthewsizemore3701]

I'm a new subscriber love to watch people make these things

[@samunaesi7727]

By lengthening the chassis you improve high speed stability but you sacrifice slight amount of nimbleness and also by mounting the engine lower and Infront of the rear axle you massively improve handling.

[@chris_is_motivated7048]

What's up vasily can't wait to see what pops next into your beautiful mind!

[@eriknulty6392]

love it!!! you will need to revalve/respring the rear shocks though. BUT..... real talk, if you dont go to a motorcross track or better yet a SxS track and crush every single jump im unsubbing JK.

[@vincentroelans7408]

I like how he's holding that cr500 engine like it's his child

[@skizzik121]

Cr 500 is the only thing on 2 wheels that made me pull over and take my helmet off and reevaluate my decisions to ride lol

[@vincentroelans7408]

@@dominicleonardo7 I did the same when I got my first welder

[@vincentroelans7408]

@@dominicleonardo7 the first week I got it I cleaned it like 50 times hahahaha

[@andrewhawk2154]

makes sense to use the 600 but the 2 stroke woulda been so cool i think

[@tybarrington3995]

Are you on drugs

[@andrewhawk2154]

@@tybarrington3995 what can i say i like 2 strokes

[@natesyring8981]

I agree bro

[@tybarrington3995]

Jk bro

[@tybarrington3995]

Me nine

[@rccars2.010]

Dang man I wanted to see the 500cc 2stroke in that chassis lol but that motor is gonna be bad crazy fast!

[@oestv5788]

Same that would be sick

[@GJGAMING5]

😢

[@rccars2.010]

@@oestv5788 with the 500cc you would hear that thing screeming

[@braptasticfilms3791]

Ikr this is lame, everyone uses street bike motors😐

[@rccars2.010]

@@braptasticfilms3791 but although its his and its his project although its gonna screem too

[@dicktrickle4197]

This is the EXACT cart I would build or buy given the chance. Side by sides suck and are waaaaaay overpriced

[@Mikefestiva]

Thanks for the video Vasily 👍 Really cool build here! Swag makes some great stuff, I bought there metal brake about 6 months ago and it’s awesome 👍

[@jmrbuilds]

I have followed you channel for a while now on my other KZbin account and is amazing to see how far you have come , the first video that came in my recommended was when you had the accident on the green Chinese buggy , I just opened my channel but I just wanted to let you know that you were a huge motivation for my to start this journey I'm not as good as you but hopefully one day I can achieve what you have done Thanks for making all this great content, and keep the good work man!

[@abethebabe539]

Nooo! I wanted to see it in the cross kart I can say I’m sure it will go in the drag bike

[@kainatticus]

Your editing and video quality is getting much better, good work man.

[@luketitch6298]

Loving the vids bro!!

[@bighomieJ5X]

Love how you just keep getting better and better with the builds, stay humble Vas & thanks for awesome content.

[@yujuanhe720]

I like how you shouted that guy "where your helmet at sir", as you put your safety at mind considering your loved ones and loved you ones, good boy!

[@CLCIII]

Your welds are looking really great! Practice makes perfect. Those rear hubs are super nice fabrications! Nice to see your shop getting better outfitted. Great Job Sir! As Always, May God Bless you and yours!

[@4npushap352]

I’m a newer viewer and I subbed on the vid of receiving the Chinese buggy , which was wild that you were gifted that 🥳🥳 dude you are awesome your builds and unique content is fantastic bud. Keep it up 👍🏼 can’t wait to see how this 600cc Beast turns out👏🏼👏🏼👏🏼

[@larrysutton6530]

Welcome to the channel Marvin I'm sure you will enjoy all the builds

[@ryandee8543]

This is the way to go. I race 600cc micro sprints. Lots of people use the gsxr engine. They make cut down oil pans. You can make one just cut your hump and change your pickup.

[@garageguy5174]

Keep the good work up man!!

[@knowbull5hit590]

That swagoffroad company seems pretty legit, offering parts to help make the harbor freight fab tools better is awesome

[@theproudONE92]

Your work is factory grade. Love watching your builds.

[@kontrolledkhaos4853]

Don’t weld anything with a bearing in place you mess up the bearings

[@sjv6598]

Yup. Not a smart move.

[@kene6838]

My butt puckered a little, build is looking good tho.

[@Andrew-ff5vm]

How to cook a bearing 101

[@davidhamilton8041]

Yes

[@danielvinyard4948]

how else would he weld the tabs on?

[@jamesmcgee9279]

Great video! Thanks for the heads-up regarding Swag Off-road.

[@sidewinderscustomgarage1614]

super cool man, that's probably the best thing you could do with that 600, getting off of that death trap!! can't wait to see you get this thing dialed-in!!

[@dharveshsahadeo9369]

Love the videos keep up the good work

[@RAWRMotorsports]

Been watching your channel for awhile .. u have come a long way and are going far bro 🤞

[@nissanaltima1267]

Looking good bub you are doing a awesome job on what you doing man keep it up loving it

[@chris_is_motivated7048]

lets go another vasily video!! I'VE BEEN WAITING....!!!

[@John_Makes]

Glad to see you finally found the safety cover for the anglegrinder. I cant seem to find my one and i have the exact same Dewalt 😅 the buggy will be awsome 🤘🏼

[@J_birdy553]

Love the build.

[@garagebuiltoffroad9432]

That 600 in that light little chassis is gonna be amazing! I have the GSXR 1000 in my buggy and it blows my mind every time I step on the fun peddle!

[@jeffwilkins3052]

John, would you be able to measure the Gixxer engine from the sump to the top of the carbs??? I'm considering turning my racing quad into a street legal reverse Trike.

[@garagebuiltoffroad9432]

@@jeffwilkins3052 it’s approximately 24” to the top of the throttle bodies and 29” to the top of the stock air box.

[@arafatmotogarage]

This is a huge upgrade to this build and also looks perfect with this big frame...

[@levidbateman5174]

Your spindle hubs look great!! This thing will be crazy!!

[@MrDmagic88]

Dude you have so many masterpieces in the making 🦾😎

[@b_rad5678]

A lot of great young talent in your area!

[@Mtech_garage]

Make a cr500 af bro

[@VasilyBuilds]

If this gets top comment I may do it!

[@jeffwilkins3052]

@@VasilyBuilds , I tried to message you on Instagram, but the server was too busy.......I had a question and was sending you pictures. 👍🏼😎

[@robertomunoz9365]

Great video like always!! I was wondering if you were planning on making more merch in the future. I would love to rock a tee wit Vasily Builds or VB on it. Keep up the good work!!

[@petermport]

Now this is what we all wanted to see

[@bf1942acepilot]

In itself, it's awesome that you're using the 600 engine, taking this in a direction that will allow you to compete. However, it's honestly quite disappointing to see that you aren't moving forward with the CR500 engine on this project. Don't get me wrong, this kart will still be sick! It just would have been refreshing to see a cross kart powered by something other than a sportbike engine. I still think you should build a cross kart using the CR500 engine in the future, rather than putting it back into a 2-wheeled machine. Again, good luck and I'm looking forward to seeing the finished product!!

[@larrysutton6530]

Very well said and I couldn't agree more 👍

[@bf1942acepilot]

@@Wontreplyeverdontbother No need to get defensive. Obviously you didn't catch the fact that I still think this kart is cool and support the project. It was a constructive way of saying the 500 engine was preferred, without any distasteful comments or namecalling.

[@nashguy207]

Nice choice of engine!

[@richard.monroee]

Good content bro!!

[@andybaker5787]

Keep up the good things vastly

[@rickduquette3399]

Gotta love that free stuff

[@amotores1]

Why did you weld the bearings!!! 🤦🏽‍♂️

[@fancygorilla8688]

that thing looks pretty cool I think its gonna be nice

[@EJ-74]

Man I wanted to see the 500 rip but I totally agree with the swap 🔥👍✌️

[@mattriella6776]

Now You are getting somewhere, doing big things now.....you got the skills to build some awesome toys man......put that gift to work , build away.......heres a tip when it comes to motorcycle powered carts.....trim that oil pan to get it flat and convert it over to a Dry sump oiling system....then you can mount the engine upright......makes a world of difference.

[@deadslow201]

Or make a custom oil pan, where oil pick up is at the lowest point, when engine block is upright.

[@karnesrussell]

Get yourself a good welding gig table so you get off the ground

[@donellmuniz590]

Ya mean "jig"?

[@garageguy5174]

I knew it would was going to happen!!

[@chancewindham1718]

Nice welds man

[@TyranisCustoms]

This thing is coming out so epic. Our next build is gonna have IRS and this is the exact approach to rear spindles I was envisioning. Bearing sleeve and tabs. I've already got the Miata parts on order haha

[@dustinramseyer4959]

What year of Miata did you get the parts for? I’m needing the same setup for mine

[@thefundad5370]

Hold on, will be a beast

[@davidgreen4888]

I was just referred to your channel You don't seem to care about material costs just what you want from your desires. God I love that! Build to your heart's desire!

[@wrenchg3954]

Great idea. But it seems like you haven't seen the power SxS are making today. Hell SxS blog has a RZR with a 2JZ making 1100hp! But either way that kart will overload the Pucker Factor. : )

[@wandalawhern1033]

You should put the cr500 engine on the drag minibike!!

[@deadslow201]

Or make a new cr500 drag minibike.

[@CorralesRacing]

Como me encanta ver sus vídeos , qué bueno trabajos maquina

[@MIKEH.777]

V tune is my man I love watching his videos yours too though

[@samsgarage1716]

I have a Gsxr so I know you will be going super fast.

[@noggurevoli1623]

Всё супер!!! Ждём продолжения!!! 👍👍👍

[@tonya9614]

Well done sir

[@martinranger7648]

I wanted to see you try to kickstart that LOL

[@Monkeywrenchmotorcycles]

I commented on your post about dry sump. Also if you want two step I’d recommend something like the MSD sport bike launch master, and a quick shifter hands down the Annitori for a stand alone but if your doing a fuel tuner I’d recommend dynojet power commander v and you can add their quick shifter to it.

[@danielvinyard4948]

Id take this over a SXS any day!👌👌 Also do some riding vids when its finished.

[@troycrowder9942]

you're moving along at a fair pace ladd like what you are doing dare to be able to change your mind it adds the human factor us humans like that keep up the good work buddy hey you should team up with moto mule i think you guys could really make some killer stuff and he is a super big nice guy with one dam nice shop just an idea i thought i might bring up to you any way happy building bud and lots of luck too thanks for the great video

[@hammerT2997]

Hell yeah man!!!!

[@bereal74]

Swag rocks!

[@sketchyoperations9181]

good descision

[@jmk6574]

I would love to see some kind of quad hybrid with the cr500 engine. Like a "honda 500ex" or "honda trx 500r"

[@joelgarside8925]

That engine is going to be crazy fast

[@THESLlCK]

Looks GANGSTER

[@texasinnovativeperformance6439]

Bro that's some fine work. Any diesel builds in the future

[@ratedredneck96]

Not gonna lie, vasiliy and C&C are both making homemade spindles and i gotta say vasilys be lookin better lol you sir have a large future of engineering and fabrication in your future if you chase it.

[@deadslow201]

Also the diagonals in chassis makes it much better than in many other youtube channels/projects.

[@adamhonn8168]

Make another race mini bike with the cr500 engine

[@Doss_Auto]

"i think it will be ight" big mood

[@jeremyweaver9598]

It just occurred to me that you're using the same background music as Hersha Petel, in the BBC Cooking Channel. That's awesome! It's like cooking, but for men! lol

[@allloganslife1515]

Awesome

[@warrenbateman5166]

Whats going on with the racing mower build ive been waiting for it!!!

[@Builditathome-Restoration]

Your good at building man amazing! Would love to race my 600$ xr400 from my build series.

[@bugsbee58]

when's next video on this build ? thanks i enjoy this one

[@ryanrotten8595]

So how many times did you put it in backwards🤔😁 lol. love the build

[@marco21falcon]

Could you show some detail on how you mount and align the engine and chain and chain sprockets?

[@markssmallengines3542]

I agree with the CR500 going into a bike again, hopefully it's another rebuilt 500 frame. I'm in Aus and they go for huge dollar's, atm there is a 85mdl CR500 97% rebuilt an has a 23k price tag on it. I'm not sure what the prices are like in the U.S but Aus is ruduclious now. Nice build, will rip when your done.

[@davidcheek5363]

Nice engine choice, great build. You’re now putting a lot more power in the back end, why don’t you look into the Edge Products Barracuda MK2 for some inspirational ideas for the rear end. The drive train sits in a box that the arms bolt onto and the engine sits in front of the box. Super strong and easy to design something similar for your purposes on CAD then laser cut and weld together like a puzzle.

[@josephharief9062]

500cc 2stroke going to two wheelers gonna be sickkk

[@reiserchris2258]

The clutch cover needs to stand horizontal by these engines😎 I ride the same engine in my crosscar🤙

[@ChrisfromKeyfarm]

You've got some cool stuff on here, I'm a builder too, heard about you from Festiva.

[@VasilyBuilds]

Thank you

[@silencefiction60]

Hello my friends love the content! I have a question that has nothing to do with the builds. Do you have an accent? I catch a bit of one now and again😁 keep up the Awesome builds👍

[@nickrudd2568]

That CR motor needs to go in a Cagiva Mito 125. Brilliant little Italian bikes

[@wadereuty1991]

Was really excited to see that 500 in it. Then you brought up kicking it while its in the frame, and I was like, awwwwww, that would definitely be a bitch haha

[@shaunpc2512]

How you doing brother, I’m thinking that you’re going to be having a serious amount of fun with Gixer motor but you do know that you can get electric start conversions for the CR500 motor don’t you?

[@stinkymans5002]

Ngl I wanna see more of the 3 cylinder mower

[@richardwicker6811]

Hey young blood I like all of your vids, but can i make a suggestion? What about putting a swing arm on the croos cart? So you can add springs and shocks for a softer ride.

[@cahird6639]

It going to have irs

[@justinabts9569]

First baby, love the videos

[@motorisedmayhem7079]

Good choice imo, that cr500 is sick but would work better on a different build!Keep up the good work man! I should quit being lazy and pick up the camera again as well, been to long 😂

[@danielvrana9444]

Hey what’s the deal you working on the W600???, Waiting for some updates. Thank you Dan

[@1osmosiss]

If you put some dishwashing liquid and water in a spray bottle and prespray the area your welding it will stop weld splatter from sticking and it’s cheaper then buying it. Cooking spray also works but leaves the metal oily...bad when you want to paint the frame

[@davidmckinney6577]

You should be a engineer you are super smart guy 👍 buddy god bless you 🙏 my friend and I hope you stay safe and healthy.

[@alexshakin3337]

Васька, молодец!

[@sendit9129]

Also, the 500 would be sick for a small frame drag-kart build.

[@reggiexp69]

yes like the blaster drag bike he made use taht 500cc 2 stroke for a same bike

[@savagediesel7.348]

Can you make another spindle set up like this I’ll buy it ?

[@golem-cx1lg]

There is a aftermarket electric start system for cr500 motors and that would resolve the starting issue

[@matthewvanprooyen259]

“I think it’ll be Ight” lol

[@keithw372]

not best to run your welds down hill , but its cool man lol