T-Cut - Is It Any Good? Original Colour Restorer & Rapid Scratch Remover Test

[@PaulDoldenDetails]

Bloody brilliant video great comparisons made here T cut used to be the only phrase Dads out there new or grandads how times have changed thankfully for the better T cut also smells terrible 😞

[@SpeckyMcSporran]

Haha yeah it's not pleasant. Glad you like it dude! 👊

[@broskhannaleem1725]

@@SpeckyMcSporran ďfć

[@garyg8668]

I put a big scratch on the bonnet of my MGB when washing it yesterday. I had a bottle of greet T-CUT in the garage from 20 years ago, so I used it manually and it done a great job. I'm off to buy an electric polisher to do the whole car now. BTW great vid cheers.

[@bobbyboy6397]

Did my car for first time with T Cut. Never used it before. Think I put to much on because it took ages to get rid of the hazing. In this hot weather I was sweating 😅. Then put some polish on. Still bit hazy. On other side of car I didn’t put much on. Came off better. Learning curve. 👍

[@SpeckyMcSporran]

If you have modern paint then a less aggressive compound is recommended. Try the Meguiars Ultimate Compound I showed or maybe an All-in-one polish like AutoGlym Super Resin Polish if you just need a brightening.

[@bobbyboy6397]

@@SpeckyMcSporran is it good for using elbow grease with soft cloth as I don’t have a polish machine 😀

[@SpeckyMcSporran]

Yeah the AutoGlym is easier by hand.

[@thatmfka555]

Yeah never apply too much of anything . And don't work directly in sun if doing it outside. Shade area only

[@jerrywallop5647]

You should never apply in hot / direct sunlight……

[@rogerpritchard]

Never thought I'd watch a video topic such as this! I've been using T- cut since 1974 when my wonderful dad had a green 3500 P6 Rover. Brilliant for cleaning fibreglass as well. A good wax afterwards such as Auto Glym finishes the job. Happy new year for 2023!

[@SpeckyMcSporran]

Happy New Year to you!

[@pondy1379]

I watched this video 2 years ago and came looking for it again, excellent straight to the point demonstration of polishing. I'm now re-informed and ready to get rid of the scuffs, thanks dude

[@SpeckyMcSporran]

Glad it's useful to you! 🙌🏻

[@therealovidox]

This is what i was looking for Maguires vs T CUT... and you can see why maguires is double the price (atleast here in Australia). Using the compund and the Maguire polishing after is the best option but more expensive

[@adriannewbold3764]

Great video mate it confirms what i've know for years that T Cut rapid is perfectly acceptable if used carefully and you finish off with a polish,.

[@SpeckyMcSporran]

Yep, it's a heavy cut compound but you can reduce that with a softer pad etc.

[@sixtysecondsofstephens2386]

Great comparison. I've used all 3, the t cut prior to the megauirs as I'd never heard of it until last year. I was happy with how t cut worked at the time.

[@SpeckyMcSporran]

They all cut well but they all need polishing after to get the gloss and clarity back.

[@vektor2006]

Fantastic video - so informative and minimal waffle. Love your presenting style. Thanks!

[@SpeckyMcSporran]

Thank you! 🙏🏻

[@davidboyce6427]

Last Sunday I used Meguairs Ultimate compound on a black Toyota Tacoma bumper and it worked great with a medium cutting foam pad. Pad was 2 inches on a mini cordless polisher 👍

[@24secondsperframe68]

I sprayed a guitar with Montana gloss acrylic paint - just because they have a superb colour range and the cans put the colour on pretty smooth. Then used Autotek acrylic laquer. After that I used T-cut by hand with a classic yellow with red stitch polishing cloth. 2-3 phases with the stuff and it got rid of all the slight orange peel left over from wet sanding and small scratches to a mirror finish. Despite what it says on the tin, I found the best process was to work it in quickly and buff it off quickly, but be sure to use fresh soft cloth/microfibre to polish it out each time. If you hang around it can leave boundary marks in a type of bloom/haze that you have to rework to shift. On the rear of the guitar body I had to make a repair and just repainted it without the laquer and that buffed out just as well on it's own. It was a light colour mind you so I can't vouch for dark colours.

[@SpeckyMcSporran]

That's really interesting stuff, thanks so much for sharing! 🤛🏻

[@simonfunwithtrains1572]

With no electric polisher, used Mcguire's by hand. Takes an awful lot of work to remove even very minor scratches on lacquer with this product but the finish seemed very acceptable.

[@kerryfoster1]

Well my old 07 transit paint definitely fades. Looks fine but I have to use the scratch remover version now. Very thick indeed.

[@fantajenkings4068]

Clear coat has lifted on my wing so I'm going to wet sand it down, T-cut and polish until I can afford to get the clear coat resprayed.

[@HantsLeo]

I can remember using T-cut with stockinette on my daytona yellow MK1 escort, I gave my neice 50p for helping by rubbing it off. I feel guilty now I've seen this. Thanks for the demo of the ultimate compound, I was about to add some to my stash but not now, I must admit I was worried about the finish it may leave. I love Meguiars Ultimate Polish, I find it 'polishes better than SRP and seems to clean the paint better resulting in a longer lasting shine. Keep 'em coming, I find your videos useful and interesting. Stay safe.

[@SpeckyMcSporran]

Thanks mate, I haven't tried Ultimate Polish yet but I guess I'll have to now 😄 glad you enjoy the content 👍

[@Mogsy28uk]

great video mate, can't beat the Meg's Ult duo - Compound & Polish and a cheeky wee run through with a DA.

[@SpeckyMcSporran]

I haven't tried Ultimate Polish yet but I've heard good things 👍

[@sammybaker6872]

@@SpeckyMcSporran don't it's full of silicone and fillers

[@SpeckyMcSporran]

I know but that's good for adding shine and gloss

[@steveking2170]

Good video specky. I think t cut is underrated. When working by hand I was always told to work it in until it goes clear/oily. That way you break down the abrasives and finish it down better. The key is to use a microfibre folded into a pad which will allow you to exert enough pressure to break it down properly (I've always found it tough with microfibre pads). I've actually found it to finish down alright when used in this way but it never hurts to use a coat of SRP before the wax.

[@SpeckyMcSporran]

Thanks Steve, that's interesting. I try not to compound/polish by hand any more, machine is the way forwa for me 👍

[@ObiWanShinobi85]

I've got a white high gloss table which I've had for a few years but has got a few scratches over time, the missus now wants a rustic table to match new furniture so I was thinking of getting white t cut to buff the scratches out so i can sell

[@SpeckyMcSporran]

Honestly I can't say how well it'll work. T-Cut is very abrasive so you might want to use something less aggressive first, or use it after to return some gloss.

[@alangligor]

Hi Specky! Well I have to admit very good idea comparing old school to the latest products! Good old days ... Good video/review buddy ! 👍💪

[@SpeckyMcSporran]

Cheers Alan, it was good to try the old skool stuff again and hopefully clear up any questions people may have 👍

[@TomKnightInfo]

Great, thorough review which is so helpful. Thanks! 🙏

[@SpeckyMcSporran]

Thank you! 🙏🏻

[@hogski1000]

Great advice - exactly what I needed as a total novice

[@SpeckyMcSporran]

Glad you found it useful! 🙌🏻

[@adamskikijowski9139]

Very good test. I used to bust a gut using Tcut and then Simonize wax but from this I can see it's rather out of date. The clothes were saturated with torn off paint then. However a friend came round and we used original Tcut with orbital polisher and he used splashes of water all the time. This was an old 2 pack flat colour and the result was good. So I think it has it's uses. I would always modern wax after. I do belive it is unwise to use harsh cutting compounds on clear coated cars. Of course in the old days it was a badge of honour to say how many coats you had,12 coats!!

[@SpeckyMcSporran]

It's still effective on old single stage paint if you don't/can't use a machine polisher.

[@fraforgt-350r2]

I remember as a kid my dad used to get me to help him wax our e36 with T-CUT mettalic and then follow with SRP. It always was very tricky to buff off and it smelled ok. To this day my dad still doesn’t understand what the difference between a wax and polish is. He seems to think SRP is a wax and wax is a polish 🙄

[@SpeckyMcSporran]

Funny enough, SRP is a polish, filler and wax all in one so he's nearly right!

[@fraforgt-350r2]

@@SpeckyMcSporran it is an amazing product to be fair. I’ve just used it to tidy up my corsa ready for sale and it’s produced a really glassy smooth shine. And it’s so good at hiding those small scratches.

[@SparkleanAutos]

"Is T-Cut any good?" A question that could be answered without an 18 min video 🤣 but still, it's been that long since I used it, it's nice to be reminded just how difficult it was to remove. I think you should do a 'Colour Magic' review next, test the different colours on different cars 🤔🤔

[@SpeckyMcSporran]

The original is not up to scratch these days but the Rapid Scratch Remover is still a decent compound before polishing. The coloured versions are temporary in their colouring but I might look into them in the future 👍

[@SparkleanAutos]

@@SpeckyMcSporran doesn't do it for me lol Meguiars is a perfect product for somebody to learn machine polishing with though and soooo easy to remove!

[@warrenhaines1717]

Many thanks. Great comparison video. Really useful.

[@SpeckyMcSporran]

Glad I could help!

[@stevenjones19-m8i]

Hi Specky,the results are totally different.the original T-CUT on the bonnet wouldn't come off by hand.the Meguiars one is the best to use with a DA polisher.

[@SpeckyMcSporran]

Cheers Steven

[@evieemaya88]

Good video, think your great for the British market viewers. I would look to do this test again but with a machine polisher, I do believe by hand polishing does nothing, too many anomalies.

[@christhwaite6811]

Well done mate👍. I used to use the old T-cut with my old Makita SA700 back in the 90s. Bloody nightmare and didn't know any better. Had to use Super resin over it with a soft pad to remove it haha. But at the end of the day it's still on the shelves in shops 100 yrs later, so people are still buying it.

[@SpeckyMcSporran]

Thanks 👍

[@coley240387]

I've got a bottle of scratch remover that is untouched and due to sit on the shelf until the end of time. Maybe now it will get a look in..🤔

[@SpeckyMcSporran]

Sometimes it takes a video like this to help you see a product in a different light. 👍

[@TerminatorT-xn4ep]

Great video you can feel a ton of abrasions in the original T-Cut when u rub a bit on your finger and thumb...when I used it with a rotary all those years ago I had to use a liquid wax to buff it off would buff off much better but that’s all we had as a dealership valet...

[@SpeckyMcSporran]

It just didn't want to come off after i worked it with a DA, panel wipe was a little overkill but it worked.

[@rockystone1821]

Hi , interesting Vidio, I have a hand painted series 1 land rover 1950, when I say hand painted I mean brush painted, it's been done very well , it is a silk finish . I was wondering if it can be improved upon, I don't want it glossy but just improved. Could I use t cut and then finish it off with a good quality wax ? Thanks in advance Andrew

[@SpeckyMcSporran]

It might help to flatten out the finish but it's an old school product which doesn't gloss out as well as some others.

[@rockystone1821]

@@SpeckyMcSporran thanks thats sounds promising, so could I use a good quality wax polish after the treatment of the t cut? Thanks Andrew

[@SpeckyMcSporran]

Yes that's a good idea, polish will help to add gloss and wax will protect 👍🏻

[@Jin-Ro]

I remember TCutting my dads car (by hand) as a punishment. Frikkin nightmare. I still use it today though, it's better than the designer brands I've used in my opinion.

[@stevegriffiths566]

Hey great video really chilled I have a BMW 6 series its really need of a buff and polish Should i go with the maquires ? Also could yoi recomend a forst tome machine polisher and what pads etc. Id be most 🙏

[@SpeckyMcSporran]

The Meguires is a good compound but if you're new to polishing then you may want to start with their Ultimate Polish instead as it's less aggressive and easier to use. As for a beginner machine polisher I'd suggest a DAS6 or similar budget dual action polisher.

[@stevegriffiths566]

@@SpeckyMcSporran thank you for your reply 🙏

[@cameraexpert6276]

Great video....very well explained...cheers mate...👍

[@SpeckyMcSporran]

Thank you 🙏🏻

[@paulcadman3562]

Very interesting illstick with the Maguires

[@DenisMLawlor2002]

Great comparisons here as I was just wandering what the difference would be between hand and machine applications. On a 2002 vw golf Gold in colour and never been treated, as it's an old paint would it be best to use original T-cut by hand, then Panel wipe and finish with Maguires 120 polish by machine? Thanks in advance.

[@SpeckyMcSporran]

If you've got an older single stage paint (no lacquer) then original T-Cut by hand will remove oxidation before you move to refining it. If you have lacquer then start with machine polishing with a fine polish to see how much cut you'll get and work up to a harder pad or heavier cut polish if you need it.

[@thehero92]

So for a panel Is Better the new t-cut than the original formula? I busto bought the original One but After viewing your video i think i Will change It with the newer

[@SpeckyMcSporran]

The original colour Restorer is best for older single stage paint, the new one is better for modern paint.

[@paultaylor9652]

Very interesting test Scottie, keep them coming.

[@SpeckyMcSporran]

More to come!

[@Wayne55231]

9:13 I have the same machine, comes in many brand names i know. What speed do you keep the speed dial at when cutting?

[@SpeckyMcSporran]

I find it very underpowered, usually 4.

[@Wayne55231]

@@SpeckyMcSporran I was on 3 and a half. Thanks ill try 4.

[@degsey0]

Hi there great video, can I ask please how do you get rid of hazing and what product would you recommend please

[@SpeckyMcSporran]

Fair question! Hazing is the result of your compound being too aggressive and leaving behind deeper abrasions in the paint. You'd need to polish them out with finer abrasive compounds and polishes until the surface is perfectly smooth. Scholl Concepts S20 Black is a great product as it starts very aggressively but becomes finer and finer as you use it until it becomes like a finishing polish. If you don't like the sound of a diminishing abrasive then you could try Meguiars Ultimate Compound and change pads (firm to soft) as needed. Hope this helps!

[@degsey0]

@@SpeckyMcSporran thanks I used the compound you mentioned to remove a very light scratch by hand and it took the scratch away but left a 75 mm haze patch right in the middle of the black panel , so it’s for that only and sorry I didn’t explain correctly

[@SpeckyMcSporran]

Ok in that case if you're doing it by hand then Angel Wax Perfect Polish might work well to smooth it out. Keep in mind that polishing by hand will require more effort and time.

[@nigelbryant5932]

Specky, great content. T cut stinks . That tin is the same stuff my dad used in the 70's. You are correct, I used Maguire s by hand and it was rubbish. However by machine it was ok..not great but ok. Still leaves marks I the paint. Keep up the good work.

[@SpeckyMcSporran]

Thanks Nigel! The Meguiars is good stuff as cutting goes but it won't leave a perfect finish, that's what polish is for. I haven't tried their ultimate polish but it would be a good companion for the compound.

[@lancelotward234]

Great video! I’m actually looking to use a product on a shower wall that has gone a bit grubby. Could you recommend anything? Have you used anything similar to clean a shower wall?

[@SpeckyMcSporran]

I've used cream cleaners like Cif as they have abrasives, never tried a car polish/compound in the house though.

[@LAW-fv6ys]

Meguiar's wins hands down. Look at the haze with the t-cuts and hard to remove as well proves it isn't a great product especially on metallic paint with hard lacquer clear coat.

[@nemonemo6285]

Great video, good production.

[@SpeckyMcSporran]

Thank you!

[@Grimwriggler]

i just T cut and polished an old Peugeot 406 with very impressive results

[@SpeckyMcSporran]

It still works, glad you polished it too as that'll definitely improve the clarity 👌🏻

[@Grimwriggler]

@@SpeckyMcSporran Indeed the polish and also a wax really brought back the shine after years of neglet.

[@SpeckyMcSporran]

Awesome, nothing better than a shiny old car 👌🏻

[@Rowallancars]

Tcut isn’t a polish it removes road film and very fine layer of top coat. It will be hazey until it is polished. Then it will look better.

[@SpeckyMcSporran]

Correct, it's a compound.

[@paul-fk7de]

Amazing videos thanks the meguiars a got all 3 bottles out of halfords wax polish and compound a had done my full car by hand came up amazing that car was ford focus now got Vauxhall mokka red so when I get time I will maybe try it with the machine polisher

[@SpeckyMcSporran]

Red cars look awesome after a good polishing!

[@paul-fk7de]

@@SpeckyMcSporran just need to get confident on using it never used one before have you or are you doing any videos on machine polisher ?

[@SpeckyMcSporran]

I've done a couple but not really gone into the tutorial side of it but I'll be filming that soon 🤞🏻

[@paul-fk7de]

@@SpeckyMcSporran thank you a will be looking out for it love the channel find your advice very helpful ❤👍👍👍

[@SpeckyMcSporran]

Thank you Paul, really appreciate the support! 🙏🏻

[@FOXY-2023]

Great video . Someone else doing all the graft helps 😄.

[@andyrantshumanphilosopher7571]

How does the ultimate compare to something like koch chemie h9?

[@SpeckyMcSporran]

Sadly I haven't tried any abrasives from Koch

[@tmphotography8443]

Remember using T Cut on a mate modified Moggy he had for sale . Christ it was hard work on a warm day and that was out of sunlight . Sure my fathers got some of this in his garage , if i do his car hes so confused by the methods used now and always moans about how much Ive paid out on the products

[@SpeckyMcSporran]

It's showing it's age for sure but the rapid scratch remover is pretty good as a compound before polishing.

[@tmphotography8443]

@@SpeckyMcSporran I've got the Megs compound and some G3 scratch remover but has shown how products are evolving over the years

[@thehero92]

Can i use a microphiber clothe with tcut and then wash It and reuse later on?

[@SpeckyMcSporran]

Yes you absolutely can 👍🏻

[@socialengineer1441]

Iv got an issue if you can please give us some advice, I bought a car with a sticker on it, I removed the sticker but it seems abit lighter underneath, you can tell its different shade, I was assuming it would've been darker under the sticker but its actually slightly lighter. Any advise?

[@SpeckyMcSporran]

Very strange, I'd suggest polishing the panel and see how it comes up.

[@jammyone100]

T-cut "Tetrosyl cutting oil" is probably one of the best brand names known in the automotive aftermarket as its been around for ever. However in todays modern market its not a good choice for those that know about detailing. Its really the go to retail product for the general public that know no better. It wouldn't be going anywhere near any motor of mine. Might as well be pouring Brasso, with grains of sand onto your paint ! 😉

[@SpeckyMcSporran]

Yep, all fair points. The rapid scratch remover is a decent compound as long as you're willing to refine after but there are better products out there.

[@harveybola1567]

what a good presenter

[@SpeckyMcSporran]

Thank you 💗

[@Junaidddevil]

Excellent video Specky, one quick question though. When we compound and polish, does the polish need to be reapplied at each wash or does it stay?

[@SpeckyMcSporran]

Good question! Polish is generally something to improve the look of paint by removing the dead layer or damaged top layer of paint. That means there's nothing really left behind to reapply. But if you're using a product like AutoGlym Super Resin Polish then you'll get best results using it 3 - 4 times a year as it contains fillers and wax.

[@rebeccamcglynn2306]

Maybe a stupid question but last time I t-cut a car I got it washed a couple of weeks after and it all went away. Are you supposed to do it each time? Can I just do the spots that need it? (My mirrors and handles and one scratch only need it as I have an 08 red car it’s getting worn)

[@SpeckyMcSporran]

Was it T-Cut colour fast by any chance? That contains coloured fillers that wash away over time. A proper compound like the T-Cut rapid scratch remover would give a permanent result as long as you don't add new scratches. And yes, you can use it on the areas needed without having to do the whole car.

[@rebeccamcglynn2306]

@@SpeckyMcSporran no idea, very guilty of doing the girl thing of ‘ask the man in the shop’ but I’ll make sure to get that one this time. Thank you, helpful video 🙏

[@SpeckyMcSporran]

Glad I could help!

[@socialengineer1441]

When I was a lad, great book.

[@kierangodward9654]

I remember this from a kid my granddad and bro used it . I remember it was a hard polish to get off .one my work mates put it on a bonet it won’t come off then man who owned the car want happy n asked me haw get it off I told him I tryed taking it off but won’t come off need a buffing merchen take it off he laughed at me so I said I no what I’m talking about as I was a Valeter at Land Rover soon changed his mind n was asking for prices I told him I don’t do it any more n don’t no anyone that does it. Never take piss out someone that knows what there on about he sold the car n lost some cash as sold with a big white coat patch on the bonnet should took the advise

[@Molluscful]

Hi Specky, really good comparison. Is there a electric polisher/kit you would recommend or are they all very similar to use?

[@SpeckyMcSporran]

If you're new to polishers then the Guild Dual Action Polisher from Argos is a good place to start. Last I checked it was £50 and you only need to pick up a few pads and some polish to kick things off. Dual Action polishers are the most "beginner friendly" tool to learn with. You can buy better ones with more power and better features but the fundamentals are the same. I've got a video in the works as a beginners guide to machine polishing so keep your eyes peeled for it.

[@littlecherryful]

The problem is the video doesn’t show the scratches before and after using the products but apart from that they are good videos

[@manthacherub5698]

Thank you, I haven’t finished watching, I hope the Dolly Parton listening is true 😃

[@SpeckyMcSporran]

Why wouldn't it be true? I love a bit of Dolly!

[@choddo]

Good video - I wasn't sure what the damage was you initially deliberately added - looked like swirls?

[@SpeckyMcSporran]

Yea it was swirls, wasn't going too deep with the damage as this is my only test panel at the moment.

[@Just_Bald_Chris]

T cut always reminds me of brasso,..... What inspection light are you using and is it really a case of more money is best?

[@SpeckyMcSporran]

I have the Unilite IL-625R which I got for around £35 on eBay. You can get cheaper lights, it just depends on what features you need.

[@Just_Bald_Chris]

@@SpeckyMcSporran if it's good enough for you and works well and shows on camera then it's good for me.

[@Xodia91]

Hi can you recommended a cheap panel wipe please?

[@SpeckyMcSporran]

I make my own with ipa and water, doesn't get much cheaper

[@stephenmason5682]

Why is there no mention of Autoglym products these days?

[@SpeckyMcSporran]

They're mentioned often but there aren't many new videos due to there not being many new products from AG. They're an established brand that doesn't need much marketing, it's a household name. That being said, I've got a video featuring them soon.

[@paultweedley2026]

Hi, l have a black laminate worktop beside my sink that's developed a few surface scratches and some faded yellowing around the scraches, I've tried white vinegar/bicarbonate soda but doesn't work, interestingly l wiped on wd40 and it has worked and restored the black sheen but I think it will wash off with warm soapy water, do you think t cut scratch remover would return the original black sheen to the laminate if it was well polished in? Does t cut scratch remover contain a wax ? Thanks m8

[@SpeckyMcSporran]

I wouldn't recommend something as harsh as T-cut to remove scratches from plastic as it's super aggressive. Try meguiars plast-x instead.

[@vergo8]

im gonna be getting a da polisher soon as i already have meguires ultimate compound could i use any brand of polish after as i currently only have autoglym srp and autofinesse tripple...is that even classed as a polish ? and i really dont want to buy anymore....thanks

[@SpeckyMcSporran]

I started with the Argos £50 machine polisher and it's good to learn with. SRP and Triple are all-in-one polishes so they won't do much for damage but will definitely improve the paint.

[@vergo8]

@@SpeckyMcSporran great,so start with meguiars ultimate compound then either srp or tripple,I've currently got my eye on the das 6 da from clean and shiny for £89

[@SpeckyMcSporran]

Good polisher that. Yes, follow up the compounding with a polish. If they don't do enough then pick up something like Meguiars M205 or maybe Angel Wax Perfect Polish.

[@vergo8]

@@SpeckyMcSporran thanks for the advice 👍

[@SpeckyMcSporran]

Happy to help

[@TwinDad1988]

Loved the video :-) good to see the comparison between old and new ways :-)

[@SpeckyMcSporran]

Cheers dude 👊

[@TwinDad1988]

@@SpeckyMcSporran I gotta ask, I mentioned on Instagram about using ultimate compound as a comparison, had you already thought of it or did I help? ;-)

[@SpeckyMcSporran]

Let's just say we both had the same idea 😁👍

[@TwinDad1988]

@@SpeckyMcSporran awesome :-)

[@MrDominicg90]

You don’t even need a buffer with arms that quick 😂

[@smawtan]

Really helpful. Thank you!

[@SpeckyMcSporran]

🙌

[@johngatland]

You didn't mention the smell of the original Tcut, it was awful, hated the stuff.

[@SpeckyMcSporran]

Fair point, it's pretty bad.

[@jc6087]

I love the smell of tcut, WD40 and petrol 😊

[@SpeckyMcSporran]

Me too!

[@jakeyork6730]

You should always polish it arfter and then see the result

[@SpeckyMcSporran]

Yep, that's what I said in the video but I wanted to show the performance of the products before polishing.

[@jakeyork6730]

@@SpeckyMcSporran I know mate I commented to fast 😂my bad great work 💪💪

[@SpeckyMcSporran]

No worries bud, I appreciate the support 👊🏻

[@neilhamilton2621]

So you t cut then use polish

[@SpeckyMcSporran]

Yes, T-Cut is highly abrasive so with modern paint it's best to refine it with a polish.

[@paulbontidean135]

You're not showing us how the bonnet looked before so how we know what you've removed? What scratches or damages on the bonnet?

[@SpeckyMcSporran]

My mistake 🤦🏻‍♂️

[@7417928020]

Super brother

[@alanbrand7681]

No its horrible dry stuff totally out of date and takes bigger scratches out leaving dull flat paint with smaller scratches...loads of better products out there by menzerna 3m meguiars to name a few

[@TobiasOswald-y3f]

Keegan Brooks

[@orankelly1773]

Your not the first person to use t cut with a machine at a garage my dad worked at in the 2000s they used t cut all the time.

[@SpeckyMcSporran]

Ok, fair point. But did he make a youtube video about it? 😂

[@orankelly1773]

No he used a Nokia back then lol🤣

[@SpeckyMcSporran]

Those were the days 😍

[@kinnonmcallister]

Me too about 10 years ago! But I did use the Mettalic T Cut last summer to help my neighbour. The whole back bumper had a few scratches and paint transfer where someone reversed into her in Asda car park. I tried SRP and Megs Ultimate Compound by hand with a proper Polishing pad. Sold all my machines a few years ago. So the Mettalic T Cut worked very well. Another great video mate 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@SpeckyMcSporran]

It's not terrible, it has a place for those who don't have machine polishers and don't worry too much about the finish.

[@kennethdrewary1094]

It doesn't work on my car. Complete waste of money

[@SpeckyMcSporran]

Which one did you use?

[@kennethdrewary1094]

@@SpeckyMcSporran I didn't know there was a choice. Just the one in a red bottle, lol

[@SpeckyMcSporran]

The rapid scratch remover is the one you want for modern lacquered paint, the original is for old single stage paint. The video will show how they differ.

[@k19ten]

Interesting.....

[@SpeckyMcSporran]

Glad you think so!

[@k19ten]

@@SpeckyMcSporran wonder what the results would be like with a different pad.....

[@SpeckyMcSporran]

I'll test the Rapid Scratch Remover again on a softer pad as this is very soft paint but I doubt it'll finish much better, good as a cheap cutting compound though.

[@JustMyFish]

Non are as good as Car gods pro scratch in polish pain Restore.

[@SpeckyMcSporran]

Did you know its made by the same company?

[@alixchesterfield3663]

Why the back ground music???????? mind numbing

[@SpeckyMcSporran]

I don't like silence

[@1stfrompuertorico568]

1st

[@SpeckyMcSporran]

👏👏

[@johncoulton9841]

T cut scratch remover doesn't work don't waste your money just tried it sh--

[@ujkhan1]

Didnt see the purpose of this video could have been better if used on 3 different spots

[@Wagstarr]

You don't a machine polisher with that fast hand polishing