The Fastest Way To Wax A Car! CarPro HydrO2 !!! (DEMO & REVIEW)

CarPro HydrO2 is a wipe-less, touchless spray sealant! It’s the easiest and fastest way to wax your car! CarPro HydrO2 is a revolutionary product that is formulated with special polymers that form an ultra water repellent coating and is applied simply by spraying on a wet surface and then rinsing off with water! YES! It’s that simple.
✅ Click here to buy on Amazon: amzn.to/3USj1Yd
✅ Click here for the ready to use version (no dilution required): amzn.to/3UMg4IN
►►SUBSCRIBE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOr...
CarPro HydrO2 can be applied to all vehicle surfaces: paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells. It instantly adds hydrophobicity to any surface. It’s a simple spray and rinse application that saves time, and results in a durable silica protective coating that produces a brilliant shine that lasts anywhere from 3 to 6 months. It also offers UV protection and it repells dirt and water from the surface, making cleaning the car much easier.
CarPro HydrO2 instantly revives the high gloss, deep shine, and smoothness to your paint, all while saving you time and money! This is truly a revolution in the car detailing world.
Directions are super simple:
Make sure the vehicle is clean and wet
Spray the product onto the wet surface then immediately rinse off with a pressure washer or hard stream of water
Do one panel at a time
Work in a garage or shaded area (never in the direct sunlight!)
It comes in a concentrated form (to be diluted 1 part HydrO2 to 6 or 7 parts water) or in a “ready to use” formula called HydrO2 Lite.
Gyeon Quartz also makes an excellent similar product called Wet Coat.
►Here are the links to the products discussed in the video:
►US buyers:
CarPro HydrO2: amzn.to/2uqFtcR
CarPro HydrO2 Lite (ready to use formula): amzn.to/2vA3QVy
Gyeon Quartz Wet Coat: amzn.to/2uOuv3t
►Canada buyers:
CarPro HydrO2: amzn.to/2eGEf9o
Gyeon Wet Coat: amzn.to/2gVSKXH
►UK buyers:
CarPro HydrO2: amzn.to/2tsUglL
Gyeon Wet Coat: amzn.to/2vzCa35
►France buyers:
CarPro HydrO2: amzn.to/2uXk0eP
Gyeon Wet Coat: amzn.to/2tsKzDW
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Welcome to Pan TheOrganizer, a KZbin channel designed to help people improve different aspects of their lives through fun and entertaining videos!
If you liked this video, click on the thumbs up button. Don’t forget to SUBSCRIBE to my channel if you want to keep on enjoying amazing content like this video. Welcome to the Pan TheOrganizer family!!
►List of equipment I use to produce my KZbin videos: • BEST KZbin CAMERA & ...
►You can also follow on social media:
Facebook: Pandelis Moschopoulos
Instagram: @pantheorganizer
Twitter: @PanTheOrganizer
Snapchat: PanTheOrganizer
Music by Hurley Mower
/ nedmowermusic
#detailing #detailingchannel #detailingtips #pantheorganizer #cardetailing #detailingtutorials #carpro

[@PanTheOrganizer]

►Here are the links to the products discussed in the video: ►US buyers: CarPro HydrO2: amzn.to/2uqFtcR CarPro HydrO2 Lite (ready to use formula): amzn.to/2vA3QVy Gyeon Quartz Wet Coat: amzn.to/2uOuv3t ►Canada buyers: CarPro HydrO2: amzn.to/2eGEf9o Gyeon Wet Coat: amzn.to/2gVSKXH ►UK buyers: CarPro HydrO2: amzn.to/2tsUglL Gyeon Wet Coat: amzn.to/2vzCa35 ►France buyers: CarPro HydrO2: amzn.to/2uXk0eP Gyeon Wet Coat: amzn.to/2tsKzDW

[@S4BB2k6]

Its been seven months, with extended experience with this product, do you still recommend its use? Thanks

[@trevorschaefer3253]

Pan TheOrganizer Is there a reason you don’t apply it to the glass and rims? Is it recommended for the cars paint only?

[@lipinslr]

How frequently we must apply CarPro HYDRO 2 in a year and how can we use a CarPro reload on a hydro2 treated surface

[@rcayala78]

I am now a 'pan' of your KZbin channel. Keep up the good work!

[@PanTheOrganizer]

Hehehe thanks!!

[@JohnDoe-gm5qr]

I have used this on my car before too. It works really well and also makes the windows appear to have been Rain-Xed. I used this on a car that had no coatings on it before or at least showed no signs of them. just spray on and rinse off. I like that it gets into all the crevices and now when I blow the car dry with a leaf blower that water that usually lingers in the crevices comes out easier. That is the water you notice when towel drying that just doesn't seem to go away. The rest of the car will be dry but get near one of those crevices and there is water suddenly.

[@TheNotimprezed]

This stuff is great. I applied this to my car 4 months ago and it is still beading like crazy. Car has seen 7500 miles since (daily driver!), is stored outside and has been blasted with a bunch of rain this summer. This really does seem like it can get that 6 month durability. I did a good wash with some dish soap to remove any old wax before applying, but did not clay or decontaminate. I hand wash ~ once a month, and I think that helps the durability as most touchless washes use strong chemicals that may degrade the sealant. I also had some very bad waterspots from some spinklers that were allowed to bake on for 10 days in 90+ degree heat, they would not wash or clay off, but were easily removed by Carpro Spotless. IMO, the sealant played a big part in not allowing the spots to etch into the clearcoat. The $60 500ml bottle should easily allow me to coat both of my cars 2-3 times a year for the next 5 years. This product gets a big thumbs up and must have from me if you enjoy washing your own car and would like to apply some great protection without spending hours (whole car is done in under 5 minutes). If you are a Pro this product makes a ton of sense in that it only costs a couple of dollars per application, is applied in a few minutes, lasts months and customers will notice how well it protects and beads water.

[@PanTheOrganizer]

+TheNotimprezed That is a great real world experience! Thanks for sharing!! How did you discover my channel?

[@TheNotimprezed]

Pan TheOrganizer It was a KZbin suggested channel based on my viewing of other detailing videos (forensic detailing, car craft, obsessed garage, ammo NYC, auto fetish,etc). I'm always looking for pro tips I can apply at home.

[@PanTheOrganizer]

+TheNotimprezed 👍🏻

[@dimmacommunication]

How much of the diluted solution you used ?

[@alternativeperception6949]

I done my dads car with this product I rinsed , snow foamed and then two bucket washed and then applied and rinsed straight off . My dad was convinced I had actually polished it with my polish machine. 11/10 product in my opinion

[@gambietti]

Good stuff. I just picked up Gyeon wetcoat and love it. Gives your wheels added protection and pop as well. I will use a product like this for a daily driven car applying it every 3rd or 4th wash.

[@waltdisney39]

Since retirement two years ago and moving out to the country I found my car and truck covered in fine Iowa dust during harvest time. Since I'm the type if I'm going to do something I like to do it to the best of my ability. I found auto fetish on KZbin and began to take notes on his methods. Then your website came up while I was watching his video, and it seemed like you had the exact same interests and passions as I did. I started watching and couldn't stop. Now I've started over and taking notes. Thanks again Pan.

[@PanTheOrganizer]

+Rick Hobbs That's good to hear Rick! I'm glad you're enjoying my videos and learning too. I work very hard at producing these videos. 👍🏻

[@waltdisney39]

Love all your videos, especially any that have to do with keeping things neat and clean. That includes home, shop as well as the car. Always looking forward to the next video.

[@PanTheOrganizer]

Thanks Rick! I appreciate it! How did you discover my channel?

[@BattleBornDmax]

Love the channel! Best detailing videos on KZbin. Pan can you make a video on cutting, polishing vs waxing (are they the same?) basically explaining when to do each and exactly how you do it, what pads to use etc. Generally you usually show basic tips, but I want a super in depth tutorial please? I never thought I'd be into detailing this much but I have watched nearly all of your videos now and bought a bunch of the products you recommended. Thanks again!!!

[@PanTheOrganizer]

Hi! Thanks for your awesome comments! I appreciate them. I did a full tutorial on paint polishing, but it was in French. I will do a full one in English for sure one day! How did you discover my channel by the way?

[@BattleBornDmax]

Pan TheOrganizer I became enamored with foam cannons on instagram because I bought a new truck and didn't want swirl marks in my brand new black paint. Then started watching chemical guy tutorials, which were lacking, so I started searching KZbin and found your channel. While I'm on here, I still have my old truck. My carpets in that are severely soiled from drink spills etc. What carpet shampoo do you recommend? Lastly, I have to admit, I don't speak French but watched a few of the same videos in English and French to see if there were any differences. Thanks for the response!

[@PanTheOrganizer]

+Ungankable Chemical Guys Fabric Clean or McKee's Carpet cleaner work great. Did you watch my video on how to clean floor mats?

[@-Galavanta-]

I'm sorry but I must be missing something? I can't see any difference the between before and after, take for example at 2:58 the front door has been treated and the back door not, there is no difference in sheeting, beading or gloss... maybe I'm blind.

[@PanTheOrganizer]

+Galavanta Look at the hood portion. Before HydrO2 the water pools, doesn't bead, and sheeting is slow, typical of unprotected paint. When HydrO2 is applied, it's easy to notice the instant beading and sheeting. The surface is now hydrophobic. For the gloss, don't forget the car had just been polished so the paint was almost perfect and very shiny to start. Hard to see the gloss difference on camera. I hope this answers your comment.

[@DJohnsonSoCal2012]

Yea, you're blind as fuck

[@oscarbadillo3844]

Paaaaaaan the organizer! Love your videos brother

[@PanTheOrganizer]

Thanks Oscar!

[@woncho1]

Perfect timing for the video. Just purchase a samples box containing 9 CarPro 50ml products. Hydro lite being 1 of the samples. 👍🏻👌

[@PanTheOrganizer]

I think you'll like this if you want a super quick way to add protection and gloss to your paint.

[@woncho1]

Pan TheOrganizer do I need to dry the car after applying the product?

[@PanTheOrganizer]

+woncho1 Yes of course, the routine stays the same.

[@toddhalstead5038]

Very nice review Pan. I have a question, after applying do you dry the car as normal? The hydrophobic action is pretty good! Keep up the great work!

[@mddell58]

Todd Halstead No. He simply sprayed it on, then sprayed it off, very well.

[@PanTheOrganizer]

Thanks Todd! Yup once rinsed, you dry the car as usual. The routine doesn't change. It's a great way to top off an existing ceramic coating, or to add a quick layer of protection and gloss to an unprotected paint. It can be applied on all exterior surfaces.

[@MrKenfal69]

If adding this for a quick layer to unprotected paint, how easy is to to remove when you want to do the actual paint correction?

[@RB54DaBears]

This plus a leaf blower makes your wash much quicker! Great video

[@jeffreycabrera6658]

nice review 👍🏻👍🏻👍🏻 just got one question which one will you recommend using carpro reload or this one on top of a cquartz uk protected paint thank you very much keep up the good work

[@boofstien2]

Great video this and also a very good comment section. I had a few questions which have all been answered allready raised by others. Also an appropriate Paaaaan length 👊

[@PanTheOrganizer]

👍🏻👍🏻

[@finitolowpez]

You're my favorite Pan!! Thanks for all your helpful videos 💯💯👌

[@PanTheOrganizer]

You are so welcome! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 940,000 subscribers and we have over 124 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@finitolowpez]

@@PanTheOrganizer I discovered your channel when I started my detailing business 2 years ago any questions I came across, you were my solution and only answer. Ever since, I've become a professional detailer, all thanks to you! God bless you 🙏

[@PanTheOrganizer]

I appreciate the kind words and positive feedback! I wish you much success with your business. Where are you located?

[@finitolowpez]

@@PanTheOrganizer I'm located in San Fernando, California, I do 90% of my work mobile.

[@philliphurley3883]

I wish there was a fast way to wax and Polish furniture too.

[@PanTheOrganizer]

LOL yup!!

[@ashleyjaytanna1953]

Haha. Love your into 😂👍 Also absolutely amazing videos. I love watching them

[@PanTheOrganizer]

Thanks Ashley! How did you discover my channel?

[@ashleyjaytanna1953]

@@PanTheOrganizer KZbin suggestion. Looked on another video from ChrisFix and your video was featured in the list of suggested videos

[@willdamian1066]

Can you use carpro reset for your weekly washes when applying this or is reset only for ceramic coatings?

[@jeffreyman6044]

Hi Pan, very nice of your reviews! I have a coupe of questions on this. Would you say HyrdO2 is an alternative product of Reload, it looks like they are very similar with the main difference between the two is Reload you need to apply with an applicator and HydrO2 you spray on and rinse off. Which one would last longer after rain and sun also would you recommend to use either one or both in between washes? I have used Reload (wet applied), it is amazing probably for the first week (rain + sun) and I just couldn't see much water beading after two weeks. Washed the car with Reset, couldn't see if the Reload still on, thought Carpro says it would last for 2-4 months? My car has CQ Finest. Thanks

[@PanTheOrganizer]

Thanks Jeffrey! Upon talking with people over at CarPro, yes Reload and HydrO2 are similar in many ways, but you got it, HydrO2 is an easier and quicker application on a wet surface. I personally prefer Reload for longevity and boosting my ceramic coating's performance, but I always apply it on a dry surface. I find it lasts much longer as it's not diluted by the water from a wet surface. They suggest topping your CQuartz coating with Reload (or HydrO2) every 2 to 3 months, but I prefer doing it every 2-3 weeks as it's quick and just keeps the paint in top condition. :)

[@sonusam107]

3 months max life in India, using for the 2nd time, but gives a nice glossy look, water beads off, car looks in mint condition.

[@PanTheOrganizer]

Yes 2-3 months seems like an average durability range in different countries/weather conditions.

[@trevormuggeridge4560]

Great video,informative and easy to understand.😁👍👍

[@PanTheOrganizer]

Thanks Trevor! How did you discover my channel?

[@trevormuggeridge4560]

Looking for a detailing channel for some good advice and came across yours. I live in Rockhampton, Queensland, Australia and we have some harsh conditions and was looking for good products to use without all the hype and bullshit that comes with some of them.

[@ptheledge5390]

Just recently found your channel and I honestly could watch your vids all day long! Just wondering with this carpro hydro if I was to use this then there wouldn’t be a need to wax the car after I’ve used the clay bar? Sorry if I sound dumb lol, I’m just getting into all this detailing stuff

[@PanTheOrganizer]

Hi Paul, thanks for the positive feedback, I'm glad that you're enjoying my videos. :) There are no dumb questions by the way. Everyone has to start some place and I like to educate my viewers, hence my I make the videos. There are normally 3 major forms of paint protection: waxes, sealants and ceramic coatings. You can mix waxes and sealants (you apply a base layer of paint sealant, than a top coat of carnauba wax). But don't mix those products with ceramic coatings. Ceramic coatings are often SiO2 based (silica) and HydrO2 is one such product. It doesn't play well with waxes or sealants. So when you're done prepping the paint (washing, iron remover, clay bar, polish if needed, IPA wipe) you can then apply HydrO2 and there's nothing else to do for 2-3 months. After 2-3 months, just apply another coat. I hope that answers your question.

[@ptheledge5390]

Pan TheOrganizer thanks so much for the reply, it’s very much appreciated! Looking forward to binge watching more of your videos lol

[@jonmike316]

Pan TheOrganizer what do you do in between coating? Can you use a normal qd? How about washing? Any car wash soap?

[@jarretbyrd1]

Great video and info, thanks.. I'm just curious about your thoughts about the Optimum line of products - their wash, seal, and wax in particular. Have you shot any videos about them? Thanks again - JB

[@PanTheOrganizer]

Thanks Jarret! Optimum Polymer Technologies is a great company! I've used many of their products. Yes I plan on doing a brand review video soon! ;)

[@bullit621]

Pan, I plan on ceramic coating my car soon. Would you still use reload and the hydro2 or would you choose one? I know you use reload after initially applying the cquk. As for maintenance after the first week would you do reload and then hydro2 or pick one? Also, any thoughts on spraying this on the windows? Thanks for the videos!

[@PanTheOrganizer]

+Birju Patel You apply a base layer of CQuartz. For maintenance, every 1-2 months, you apply a coat of Reload or HydrO2. One or the other, not both. It becomes pointless. How did you discover my channel?

[@bullit621]

I was looking at various videos on detailing and I randomly stumbled on your page. First video was when you ceramic coated your 435. Any ideas on how HydrO2 would be on windows? Thanks for the quick response.

[@PanTheOrganizer]

+Birju Patel Not recommended on windows as it could leave streaks. Technically it goes on all exterior surfaces but I avoid glass.

[@jonchao9862]

Hi Pan! Love your channel and your content as usual!! I wanted to ask you for the best hydrophobic spray you recommend for cars without a ceramic coating. I currently have the Carpro hydro2 lite in my cart but also saw you had recommended p&s bead maker and also hydrosilex. What are your thoughts?

[@PanTheOrganizer]

HI Jonee. It depends on what you're looking for. If you have no protection on your paint, then you're open to anything. For long durability (3-4 months) and hydrophobic properties, SiO2 based spray-on sealants are the best (CarPro HydrO2, Gyeon Wet Coat, etc). But you can't spray these on top of waxes or sealants. You use these as a stand alone product, or use them on top of ceramic coatings. But for ultimate gloss and slickness, P&S Bead Maker is my current champion. You can apply this on top of waxes, sealants or coatings, or use it as a stand alone product. Sonax Spray n Seal is another good one. Both offer 1-2 months real world protection.

[@jaredmiramontes3549]

Hey pan, do you think you can make a proper tutorial on how to polish out swirl marks (not exactly paint correction). I know it sound simple and like something that has already been posted but there really isn't. Most "tutorials" are people that are just promoting a product or just saying what they're doing and then just doing it rather then explaining HOW to do it. I know the quality of your videos so I know of you were to make a video like this, it would be fantastic!

[@PanTheOrganizer]

Hi Jared! That's a great idea. I did a video showing how to properly compound and polish a car, but it was only in French. I'll look into producing an English version. ;)

[@stephenwalker2091]

Hi Pan, Love your channel! This product looks great and I also purchased the Carpro Cube to try out their range. Would you use a combination of Hydr02 and Reload on wheels? Is there a problem with spraying Hydr02 on the brake disks? Thanks again mate.

[@PanTheOrganizer]

+Stephen Walker You can spray HydrO2 on your wheels no problem. Great for the inner barels too! If you're speaying HydrO2, no need to also apply Reload. Use either or. How did you discover my channel Stephen?

[@stephenwalker2091]

Pan TheOrganizer Great, thanks for the reply Pan. I am getting a new VW Tiguan soon and want to treat it right. I came across your channel while researching proper cleaning techniques. I'm really looking forward to your future reviews and best product selection in each category. 😊👍

[@PanTheOrganizer]

You'll be glad to see tomorrow's video then!! Stay tuned!!

[@lkjhgfkjs]

Hi Pan, This almost looks too good to be true. Is this as effective as a standard sealant application? Is the coat equally "thick"? It looks like you only sprayed it on the paint. Can it be applied to the entire car? (Excluding tires) Thanks for all your awesome, informative videos!

[@PanTheOrganizer]

Hi Seth! Keep in mind this is a quick way to add gloss and protect your paint for 2-3 months. Paint sealants last longer but are way longer to apply. HydrO2 is also super economical. Only one or two sprays per panel is all you need. Spray on, immediately rinse off. You can apply it to all exterior surfaces except glass.

[@nmore69]

Great stuff . Do you need a pressure washer or can you just hit it with a high stream sprays from a hose

[@PanTheOrganizer]

+nmore69 Ideally you want a pressure washer, but I've seen some use a heavy stream from a hose too.

[@tabes10]

I was using hydro lite but it never use to last. Now I'm using this and its so much more hydrophobic and last longer.

[@marknewman2756]

Hi Pan Can you use this on top of a sealant that was applied by hand, thanks

[@PanTheOrganizer]

No. Don’t mix waxes/sealants with ceramic based products.

[@dimmacommunication]

I've tried the lite version and lasted 3 months, now trying the concentrated version :)

[@PanTheOrganizer]

I use the concentrated version diluted 1:7

[@ob1kdanny87]

This stuff is amazing, its magic! Love using it best to coat my wheels :D

[@ob1kdanny87]

Also use the hydrofoam regularly and layers build up, its awesome!

[@PanTheOrganizer]

Thanks for the comment! How did you discover my channel?

[@ob1kdanny87]

Showed up under recommended videos.

[@AlKidd]

I am bombarded by ads for Top Coat F-11. Is it not as good, or is it just as good, or is it better than CarPro Hydr02 ?

[@PanTheOrganizer]

Never tried it.

[@carbonfiberwizard5416]

So a few things... In the video when it was applied to driver's side door it was in direct sunlight, results seem fine. Secondly, if you use hard water in the sunlight won't this leave a ton of water spots? So basically you can't just spray it off and done, you must wipe to avoid water spotting. And lastly, this stuff is crazy expensive :) still a great video and great product.

[@PanTheOrganizer]

Thanks for watching

[@dominocabanilla]

Just like hydrosilex, same application. Good job nice video and I got another good product to make may cars shiny.

[@PanTheOrganizer]

Thanks Domino!

[@KiranPatel-fk1pg]

Hey Pan, I know this is an old video. But have you ever found using Hydro2 on wheels tends to make the dirt gunk up and stick more? I ask as other have mentioned this

[@PanTheOrganizer]

Nope. Works fine for me. I also use Gyeon Wet Coat on wheels, works great.

[@Dreamertraveller]

What is the best way to protect a white car after cleaning and decontamination wash Ps the car paint as never been protected I prefer sheeting over beading I want something which would last about 4-6 months and don’t want to ceramic coat or anything that costly.

[@PanTheOrganizer]

Here's your answer in a video I made with my brother's white VW Jetta: kzbin.info/www/bejne/j4u9XoOfrteUl9U

[@JuanPerez-yy5hr]

Wow I'm going to try it on my Wrx great video pan

[@PanTheOrganizer]

Thanks John! You will appreciate how easy it is to apply and the nice gloss and beading you get out of it.

[@jake7499]

Hi, pan. Great vid. Ive gotten really into cleaning mine and my wifes car because of you. Its so fun. I have a truck that doesnt fit in my garage, and i live in a very humid part of the world where its dewey every morning. How do i get a ceramic coat to cure that first 24 hours?

[@PanTheOrganizer]

You would have to use a ceramic coating that won’t last as long but that can cure in 4 hours. Something amazing that I will be presenting soon on my channel. Stay tuned!

[@factorman66]

Great video. & Nice product

[@PanTheOrganizer]

Thanks for watching José!

[@Avaloxz]

Hi Pan, I just used this product on my wheels, my question is: does iron remover take it off or damage the product? And also, how often do you apply this? I’ve done a through cleaning of my car already and have protected it well, I wonder if I need to keep applying per time. Thanks!

[@PanTheOrganizer]

It can resist iron removers. It’s hard to tell durability on wheels, but you know it’s time to reapply when the water doesn’t bead as much.

[@anthonyperrone20]

Loving the videos!

[@PanTheOrganizer]

Thanks Anthony! I appreciate it! How did you discover my channel?

[@anthonyperrone20]

Pan TheOrganizer I just stumbled upon it late at night looking at car detailing videos...glad I did!

[@PanTheOrganizer]

+Anthony Perrone 👍🏻👍🏻

[@MiloradLaban]

Hi Pan! Can I just wash and prepare my car, polish it and use this product 2-3 times a year. Is this a good protection in general? Would I have good protection in winter (salt etc..) with normally maintaining my vehicle?

[@PanTheOrganizer]

You sure can! And when you see performance dimishing (less water beading) just reapply.

[@Retset]

Since watching this video, I have clayed, decontaminated and cleansed my paint and applied HydrO2. I am very happy with the results and will just top up every month or two after a wash. My question is, if I decide later to upgrade to a ceramic coat, how do I remove the HydrO2 layer? Will Eraser manage this like it does for wax?

[@PanTheOrganizer]

You’ll have to polish your car to remove the coating. Or wait 6 months to make sure it isn’t there anymore.

[@Retset]

Thanks Pan!

[@mrnoname35]

Hey Pan, Thanks for all your great videos & DIY, I have recently fully corrected the paint on my car thanks to you. To protect the finish & enhance gloss, I have applied Meguiar's Utimate liquid wax at the final stage, and I was looking for a quick way to boost/maintain the protection between wax application. Would you recommend Hydro2 as a topper over a wax like Meguiar's Ultimate liquid wax ? Thanks for your wise advice, and keep up the good work. :) Cheers

[@PanTheOrganizer]

No, you only use silica based spray sealants (like CarPro HydrO2) on virgin clear coat or on top of ceramic coatings. Not on top of waxes or paint sealants.

[@marienygrd]

can you wax your car ontop of ceramic coatings/spray sealants to get that insane showcar shine? And when your ceramic coating is starting to wear off do you just redo every step from the least aggresive way of compund/polish then redo everything as the first time?

[@PanTheOrganizer]

+Marie Nygård You don't add waxes or sealants on top of ceramic coatings. I suggest you watch my latest video on how to do a proper maintenance wash on coated cars, everything is well explained. You apply a silica spray sealant on top of ceramic coatings. Boosts gloss and protects the coating. Also, by design, coatings are already super glossy.

[@marienygrd]

Thanks for clearing that up, ive already watched all your detailing videos, and before you ask: i found your channel threw searching for car care on youtube. As always thanks for the amazing content!

[@felipemtz8238]

1) This product could be used instead of wax? 2) After I had use this product if I decided wash my car a week after, can I use regular car soap or I can use a specific car soap? 3) what kind of pressure washer you recommend me? how many psi? Just I want start to buy equipment to start my own business.

[@PanTheOrganizer]

Hi Felipe. 1) Yes. But don't combine both. If you use HydrO2, silica based product, you can't apply wax on top. 2) You can use any pH neutral car soap you want, as long as there's no wax in it. 3) Any pressure washer that generates 1000 to 2000 psi is perfect for washing cars. If you want to start your detailing business, I hope you watched my two part video series. Here's part 1: kzbin.info/www/bejne/r5TTZX9ti659kNU Part 2: kzbin.info/www/bejne/n3KQiqiclNiUj8U

[@felipemtz8238]

Pan TheOrganizer thanks for your response

[@PanTheOrganizer]

How did you discover my channel?

[@felipemtz8238]

Pan TheOrganizer I searched up on KZbin how to wash cars and your video popped up. Since I started to watch your videos to learn tricks, techniques. I would like to become a auto Detailer in a while thanks for your videos!!!!👍🏻

[@beckyszlez8946]

Hii Pan i have two questions. 1- can i use hydro foam shampoo for maintenance washing? 2- Can i use honeydew foam on ceramic coatings? Tks Mr. Detailer 😉👍

[@PanTheOrganizer]

Yes to both questions.

[@beckyszlez8946]

Thks Pan 🤗

[@Harshpatil_GooglePlus]

I like your videos this and the one about cermic coat are what I havr seen till now. The crazy part is I don't even own a vehicle yet but plan to get a 3 series within few weeks. I just bumped across this chanel whilr looking at some ammo videos. I have question though, after you apply similar products like the hydro2 or the ceramic coat, how do you suggest to clean the car between the next application (3-6months as you say) and is there a need to remove the previous coat for reapplication?

[@PanTheOrganizer]

+Harsh Patil Thanks for the comments! You'll get answers to your questions soon in one of my upcoming videos. ;) Which is your favorite video so far on my channel?

[@XxLaMaravish13xX]

Question: if you JUST finished compound and polish.. you have to then wet the car again to put this on right after you finished that? Correct me if I'm wrong but I've read that you don't want to wet the car after you polish it?

[@PanTheOrganizer]

When you’re done machine polishing, you buff off the polish. The paint is dry at that point. You would then use a paint prep or IPA to wipe down any polishing oils and residue, before applying your choice of paint protection: wax, sealant or ceramic coating. Now this HydrO2 product is a mild ceramic. 3 months real world durability. So yes you would wet the car, spray on, rinse off. Dry the car.

[@ZackTrunzo]

Another great video. Question how do you go about your detailing buisness in the winter months?

[@PanTheOrganizer]

Thanks Zack! I have a heated and cooled garage, made for car detailing, so I can detail cars all year round. You can check out my garage tour video that explains it all. ;)

[@JSMedia]

This is so satisfying to watch!

[@PanTheOrganizer]

Thanks Justin!!

[@pimmz5317]

As always TOP 👌👌👍

[@PanTheOrganizer]

Thanks TAR EK !!!

[@gringo19860]

Hey Pan, should you dry the car like normal after doing this - or best to just leave it?

[@PanTheOrganizer]

When you’re done spraying this and rinsing it off, then you must dry your vehicle as per usual.

[@adamg.1845]

Do you recommend after washing the vehicle to apply a polish and THEN hydro2? Thanks and hi from NJ

[@PanTheOrganizer]

HydrO2 isn’t meant to be a super long term protection. It will lasts 1-3 months on average. It’s more used as a topper over an existing ceramic coating and it’s super quick/easy to apply, as it’s spray on, rinse off. If you are looking to machine polish your paint, I’d look into applying a long term protection afterwards, like a true ceramic coating from a glass bottle.

[@bmwmsport11]

So what is better: tight beading or water sheeting off? Seems like there’s a lot of surface tension using hydro2. Very tight beads all over but water isn’t sheeting off. A good fresh layer of wax will usually leave vertical surfaces dry after spraying. If this stuff can truly last 3-6 months then it’s probably worth the money

[@PanTheOrganizer]

3 months in harsher weather like the winter we had here in Canada. I still prefer true ceramic coatings. HydrO2 is more aimed at someone who wants a quick way to get a bit of protection...

[@bmwmsport11]

Pan TheOrganizer I’m in NY so the winters aren’t that much different lol. I figure nothing will last a season. Right now I’m entertaining the idea of ceramic coating my parents cars. Ran into hydro2 and figured it’s cheaper and I can do all of them for the price of 1 ceramic coat kit. I just feel alittle skeptical about the protection. From a simple spray on chemical it seems like all it’s doing is making the surface bead, not really protecting the paint from UV rays

[@PanTheOrganizer]

If you want the ultimate paint protection and UV protection, then yes go with a ceramic coating. I have two coats of CQuartz UK Edition and a top coat of Gliss on my BMW and it’s still going strong a year after.

[@christopherkabel4420]

Hi Pan, Thanks for the great videos and reviews.. In this video there are some kind of protection on your paint before you spray HydrO2 on and activate it. Please look carefully on the video on the before and notice how there is a sheeting effekt and minor beading effect also. You said in the begining of the video, that you had washed, decon, clayed and polished the car. Are you sure there are not any of the products which you used for polishing there has protection in it? Did you use IPA or similiar after finishing the polish? I can see there is a big different to the beading and sheeting after the applied HydrO2 and I agree its a great product.

[@PanTheOrganizer]

Hi Christopher, Yes the paint was fully stripped of any prior coating. The car was chemically and physically decontaminated, then compound and polish, followed by a proper IPA wipe to remove polishing oils and residual products. The car had not been detailed in over a year. Of course, as you spray body panels with HydrO2 and pressure wash, there is product that falls on other panels, hence why you see some minor beading. It was probably from other panels that I was spraying. But you can see on the hood and the trunk lid that the water makes a big pool of slowly sheeting (before HydrO2) and when I apply HydrO2 you see major beading and sheeting is much quicker... So what you are refering to is probably cross-contamination of HydrO2 that was flying on other panels during pressure washing. This product is really powerful. I hope this answers your comment.

[@christopherkabel4420]

Hi Pan, I follow you and agree that it could be the effects of "over" spray, which we see on the panels. What coating did you have on the car before?

[@careynichols2962]

Nice video Pan. What product do you recommend using to strip/remove my wax prior to using the hydro2.

[@PanTheOrganizer]

Purple Power Vehicle and Boat wash if you live in the US.

[@careynichols2962]

Pan TheOrganizer I'm in Sask, Canada I usually get my stuff from eshine...

[@PanTheOrganizer]

Oh cool! A fellow Canadian! If you're on the West Coast, check out Auto Obsessed, the biggest Canadian car detailing products supplier.

[@tanyoongkwong6688]

Hi pan, i love your channel. In the comment section you stated that do not add carpro hydro2 as a topper on top of the wax or sealant. I still have some question in my mind would like to ask you for your help. 1) Can i apply car hydro2 before i put my wax or sealant on? Cause i still have ultimate wax paste. 2) Does the carpro hydro2 has a curing time? Before adding another layer ceramic coat? 3) I am planning to try 75 anniversary turtle wax ceramic + graphene can i use carpro hydro2 as a topper? Thanks

[@PanTheOrganizer]

1) No. don’t mix regular waxes with ceramic based products. 2) No curing time. 3) You could in theory do that but there’s no need to.

[@tanyoongkwong6688]

@@PanTheOrganizer Thanks for the quick reply. Then i just use the hydro2 as maintenance.

[@ayske1]

can you just use a hose with the jet stream or must be used with a pressure washer?

[@PanTheOrganizer]

If you have enough pressure with your garden hose it's ok too.

[@elevatedgaming4862]

I've seen people use bread maker as a clay lube, can I use this as clay lube?

[@PanTheOrganizer]

No, as this is a spray on rinse off sealant.

[@JamieEnglish]

Pan, do you recommend this still? My wife's car is black and found this product. Between washes her car gets very dusty, and I can't seem to find much that will repel it.

[@PanTheOrganizer]

Yes of course. There have been many spray and rinse products released since. Many reviews on my channel. But you can't go wrong with CarPro Hydro2. If you buy the "LITE" version, it comes pre-diluted so super easy to use. If not, the regular Hydro2 you have to dilute (I recommend 6:1 or 7:1).

[@davidbell3282]

Great video Pan! Can this be used over Carpro Cquartz UK?

[@PanTheOrganizer]

Yes absolutely!

[@kelvinraytech]

Hi Pannnnn, :-). May I know would it be damage to ceramic coating? Thanks Pan.

[@ADGONAT01]

Hi! To apply this product, is it necessary to clean the car with alcohol (or somerhing like this) after polishing for the anchorage? How is it done with sealants or ceramics? Thanks!!

[@PanTheOrganizer]

Yes.

[@specsbundy1392]

i don't have a power washer nor access anywhere else to one ,, a garden hose with the spray nozzle on the"fan pattern", will that work ?

[@alesstheboss]

Hi pan ! Thx for the amazing video once again ! Does a wax like fusso soft99 is interesting to combine with hydro2 or the hydro Is doing the job itself ?

[@PanTheOrganizer]

Thanks for the comment! HydrO2 is meant to be used as a stand alone product on an unprotected surface, or to top off an existing ceramic coating. Pointless in spraying it on top of a wax or sealant, as I'm not sure as to how well the product would bond to the paint...

[@alesstheboss]

Pan TheOrganizer thx for ur answer ! You re awesome ! As i ve seen one of your video talking about the fusso ( im in absolute love of it ) Would u recommend hydro for all jobs now as its super efficient and long time active or still using fusso with maybe a wax spray from soft99 ( if it exist ) for a better result when time Is free Cheers from France !

[@PanTheOrganizer]

FUSSO Coat last way longer than HydrO2. Fusso is a sealant wax. HydrO2 is a sprayable, wipe-less spray nano-coating (like a light version of a ceramic coating). HydrO2 lasts 3 to 6 months depending on maintenance.

[@kawzx777]

I bought the Hydro 2 lite for around 25.00 from Autogeek.com.. 2 words.....BUY IT !!!! Think of it as Rain-X for ur entire car. I use to hand wash once a week, now i just drive thru a touch-less auto wash, dry off excess water, tire shine & go...luv the stuff

[@PanTheOrganizer]

That's great feedback! Thanks! It is a super product. As many viewers share their experience, let me know, did you buy the concentrated version like me (if yes, what dilution ratio did you use) or the Lite ready to use version? How did you discover my channel?

[@jesusgar1612]

Hi Pan! Amazing video. Thanks a lot! It's very simple use the products watching your videos!.. the Hydro2 is compatible with ceramic coatings? Thanks a lot again! Regards from Spain

[@PanTheOrganizer]

HydrO2 is a nano coating, but lasts 2-4 months compared to coatings which last years. HydrO2 is more for the ease of application.

[@BinderDundat]

Sound identical to Permanon except it is not as expensive. Gonna give it a try.

[@soapa4279]

Cool vid, and I also just bought some of this stuff. I'd like to add I think it is made from Unicorn tears, and dragon extract. This stuff is pure magic and shouldn't exist.

[@PanTheOrganizer]

+Sophana Aik I hope you're joking...

[@TheDolkNess]

Hey Pan...I know this is an old video but I recently found mist & spray sealant...been using seal & shine (terrific product) but rather save time & my back and try these spray on sealants. Do you have any experience with Autoglym Polar Seal? You mix with water in the snow foam and spray it on. I actually thought to try the similar principle but with the Seal & Shine and see if it works 🤔

[@PanTheOrganizer]

I haven’t test Autoglym products yet unfortunately.

[@ethansfera9732]

Hey Pan quick question for you, you have referred to as using Iron removers on cars to prep before waxing, sealants, coatings, etc. I am planning on applying reflex to my truck soon. How do I know if I need an Iron remover ? I am going to use a strip wash before I begin as well as an IPA wipe from Carpro after a light polish. Would using a strip wash and an IPA wipe accomplish the same goal as a Iron remover which is to decontaiminte the paint ? Thank you Pan!

[@PanTheOrganizer]

No. An iron remover is a must, in order to remove the embeded iron particles in the clear coat.

[@eddiegarcia9689]

Hi Pan, after applying cquartz UK 3.0 do you recommend reload or hydro02?

[@PanTheOrganizer]

Your pick, they're both good maintenance products for that coating.

[@EricNguyener]

Cool stuff! Would you recommend this product over traditional sealant + carnauba wax (time not being a factor)?

[@PanTheOrganizer]

+Eric Nguyen It’s a question of personal taste. This product is meant to save time on application. If you like the look of a good carnauba paste wax, stick with that.

[@karlozrwc73]

Hey Pan, I assume this is safe to use on headlights, tail lights and glass? What about on vinyl wrap and plastic trim pieces? Thanks in advance and awesome videos!

[@PanTheOrganizer]

On pretty much all exterior surface, but I would avoid glass as it can streak on glass. How did you discover my channel?

[@karlozrwc73]

Thanks for the reply! Found your vids from just searching around online for detailing info

[@paulnewman7134]

How often do you need to do a full detail and how to wash in between thanks pan

[@simonhoule4322]

Allo pan, petite question pour toi. Est ce que hydro2 donne du lustre? J ai appliqué hydro sur mon auto et l eau perle super bien. Si apres quelques semaines nous voulons donner un peu de lustre, quel produit doit on mettre? Cire, reload de car pro? Quand on enlève les insectes avec le dégraisseir, doit on remettre une couche d hydro 2? Merci et continue ton bon travail. Simon

[@PanTheOrganizer]

Oui HydrO2 a des agents lustrants aussi. Pour rajouter du lustre et l'effet lisse lors de lavages d'appoint dans les semaines à suivre, tu peux vaporiser du CarPro Reload. Oui tu dois mettre une couche de HydrO2 ou Reload lorsque tu utilises un dégraissant pour enlever les insectes. Le seul temps où tu n'as pas à le faire est si tu as une protection céramique comme CarPro CQuartz. C'est plus dure que le vernis, alors un dégraissant ne l'enlève pas.

[@datsuntoyy]

I got a bottle of this as a "free gift" a year ago. Just now used it and didn't see any difference. My install may not be ideal as 1) The car had a coat of (year old) gliss and still beaded fairly well and 2) the bottle had turned cloudy. Was it bad? Maybe I'll find a car that isn't coated and see what happens.

[@PanTheOrganizer]

Yeah cloudy isn’t good. The chemical had probably gone bad or froze at one point.

[@datsuntoyy]

@@PanTheOrganizer It had been stored in the garage. Semi sheltered but temp varied between 45 and 120 degrees. Now I have a spot to store inside as all of my polishing creams went bad also.

[@superbr263]

hi pan what if i spray this on the wheelwell? will it work? because here in our place its always muddy thanks pan more power

[@PanTheOrganizer]

It has to bond to a clear coated surface like paintwork and wheels.

[@jameshowlett459]

Will it work if I do this then park outside in a -20 deg celsius weather. Or should i wait until summer?

[@PanTheOrganizer]

As long as you apply it at room temp you're fine.

[@JF997]

How would you rate this against P&S Beadmaker? Also can I apply anything over it to "seal" it in without destroying it? Just getting into detailing.

[@PanTheOrganizer]

Bead Maker has higher gloss and slickness. HydrO2 lasts longer and is quicker to apply.

[@panthiawhelan3565]

What pressure washer/hose does everyone use? I want to get one but don’t know enough and do not want to damage my paint with too much psi.

[@PanTheOrganizer]

Here are two videos I made for my detailing equipment: 1) This is where I had my older Karcher K5 pressure washer (1900 psi, 1.4gpm, electric): kzbin.info/www/bejne/rJDZk6iLpMydmpY 2) This is where I show my new high end Kranzle 1122TST pressure washer (1400 psi, 2.1gpm, electric): kzbin.info/www/bejne/r3yQeH9jbtF8qM0

[@albertobahena9276]

Hi Pan, I just discovered you channel and I love it! I have a quick question, should I I use a clay bar before using this product everytime?

[@PanTheOrganizer]

Thanks Alberto! The more you prep your paint before applying it, the longer it will last. You should also use an iron remover before the claybar stage. Watch how I detail a car in this video: kzbin.info/www/bejne/qputgZaaeLqUgZo

[@albertobahena9276]

Pan TheOrganizer thanks for the advice!

[@PanTheOrganizer]

My pleasure. ;). How did you discover my channel?

[@albertobahena9276]

Pan TheOrganizer I had heard Matt from obsessed garage mention you in a video and then youtube suggested your 2019 car detailing products awards video 👍

[@StevenBoz]

I washed and waxed my car last fall with Colliite 845 last fall and obviously have zero beading. Is it okay to wash, clay and then Hydr02? Or do I have to strip the old wax? Any product recommendations if so?

[@ToddTinley]

Always Strip before applying any Protection to not only remove old Protection but any Soap Residue and other Oils to obtain a naked paint. Wash / Iron / Clay / Strip / Protect This gives your New Protection maximum longevity.

[@THE_ELFITOS]

Hey salut Pan, c'est ChriSX du défunt NPCLUB haha ! Je viens de tomber par hasard sur ta chaîne en cherchant des review de la marque "Produxa" suite à une pub que j'ai vu sur FB. Les review semblent super bons, mais faut se méfier car je crois qu'ils donnent des rabais lorsqu'on recommande le produit... Alors je me demandais si tu avais eu la chance de l'essayer ? J'ai ensuite vu des commentaires disant que certain préférait les produits Carpro, et c'est comme ça que je suis tombé ici en voyant une WRX comme la mienne en photo de vignette :P Ce que je trouvais comme avantages à Produxa était le fait que j'habite en condo et que je n'ai pas de machine à pression donc je pourrais quand même l'utiliser chez moi. Tandis que pour ce Carpro ici je devrais le faire dans un lave auto libre pour utiliser leur machine à pression. Au pire si tu veux faire un review de Produxa sur ma WRX si tu ne l'a jamais essayé avant ça pourrait être une idée car elle a déjà plus de 120 000km et disons que la peinture laisse un peu (pas mal) à désirer... Laisse-moi savoir si tu l'a déjà essayé et si oui, ce que tu en a pensé svp, je viens de m'abonner à ta chaîne, bien content de voir que ça semble un succès à voir tout les views et commentaires positifs que tu reçoit 👌

[@PanTheOrganizer]

Salut Chris! Je me souviens de toi! Ah les bonnes vieilles années des forums! J’ai en effet l’une des plus grosses chaînes d’esthétique de voitures au monde avec plus de 300,000 abonnés et 32 millions de views et tout ça en un peu plus de trois ans. Beaucoup beaucoup de travail pour ce rendre à ce stade. J’en suis fier! Ça fait 22 ans que je fais de l’esthétique de voitures et j’aime partager ma passion avec mes auditeurs. Je n’ai pas essayé le produit dont tu parles. Mais saches que tu peux essayer CarPro HydrO2 même avec un boyau d’arrosage. Si ta pression est bonne, ça va marcher. Mais mieux que ça, il y a les vraies protections céramiques qui durent quelques années. CarPro CQuartz UK 3.0 étant ma préférée. Voir ma vidéo ici: kzbin.info/www/bejne/qpSQZ5iNr6p6gq8

[@THE_ELFITOS]

@@PanTheOrganizer Merci je vais allez y jeter un oeil et félicitations pour ta chaîne, je sais que ça fait longtemps que c'est ta passion alors tant mieux si faire ce que tu aime dans la vie fonctionne bien 👌

[@PanTheOrganizer]

😀👍🏻👍🏻

[@michaelbuckwash2412]

Pan, how would you recommend drying after this products wash-off?

[@PanTheOrganizer]

Use a leaf blower. Watch my video: kzbin.info/www/bejne/r3m3YqevaKh4epo

[@philipchang12]

I use Gyeon Wetcoat myself, but I'm wondering if I can use it after maintenance washes when my car has something like Soft 99 Fusso coat or Menzerna Powerlock on it to top off with WetCoat. What are your thoughts? Or should I just use spray sealants on paint with nothing on it. Thanks!

[@PanTheOrganizer]

+Philip Chang You can use Wet Coat or HydrO2 over waxes or sealants, but I'm not sure how well they'd bond to the surface. HydrO2 was meant to be used as stand-alone nano coating or to top off ceramic coatings. How did you discover my channel?

[@howardlee7216]

Hi Pan , another great informative video. I’m going to be compounding/polishing one of our vehicles that has not been sealed in a long time. After coating with HydrO2 , is it best to use CarPro RESET to wash? I’d like to keep all the products from the same manufacturer. Also , would the CarPro Elixir OR the DIY Spray Detailer as per your video good for in between washings and quick detail? Thank you, Howard

[@PanTheOrganizer]

Yes to both your questions Howard.

[@howardlee7216]

Thank you Pan for the reply, I really appreciate it. I’m learning a lot from your informative videos.

[@PanTheOrganizer]

Thanks Howard! What’s your favourite video on my channel so far?

[@howardlee7216]

Hi Pan, I enjoy the ceramic coating videos as they are teaching me things I didn’t know much information about. At the moment I’m considering different options for my cars. I really like the concept of the Angelwax Enigma Ceramic Wax because of the ease of application. Just to confirm, the Car Pro Elixir can be used with the Angelwax if the Enigma QED Quick Detailer is not available. Thanks again Pan. Your videos and knowledge are top notch, thank you, Howard

[@kennbech3487]

Will the paint benefit from applying carnuba wax after applying Hydro2? for more shine?

[@PanTheOrganizer]

Never combine waxes with silica based products or coatings!

[@youngblood23rb]

Pan you are killing me! You are going to make me buy one of those pressure washers, does it plug into a standard 110v outlet? Thanks for your second to none videos, how else do I support your channel other than thumbs up?

[@PanTheOrganizer]

Hehe yeah we go nuts for detailing! Yes the Karcher K5 I had in that video plugs into a standard wall outlet. Great value. I actually reviewed it in this video: kzbin.info/www/bejne/rJDZk6iLpMydmpY Since, I’ve upgraded to the best electric pressure washer, a Kranzle 1122TST. Check out my insane review video here: kzbin.info/www/bejne/eZuXd3emgNqCiKs

[@PanTheOrganizer]

Oh and if you wanna support me, make sure you’re subscribed!! 😎👍🏻 How did you discover my channel?

[@youngblood23rb]

Pan TheOrganizer Thanks for the reply Pan, not only is your enthusiasm very entertaining, I really appreciate your interaction with your viewers

[@youngblood23rb]

Pan TheOrganizer Long time subscriber and discovered your channel while doing countless hours of KZbin research being a car nut and clean freak

[@PanTheOrganizer]

Awesome!

[@chrisz6429]

Hi Pan, just bought this. I cannot use it in the sun? What about early in the morning?

[@PanTheOrganizer]

Early morning or late afternoon is best, same applies for pretty much any detailing products.

[@Sarju017]

dude your videos are wayyy better than porn.......well in my opinion lol

[@PanTheOrganizer]

+Sarju017 Lololol awesome comment! Thanks for the support! How did you discover my channel?

[@lanesteele240]

You are watching the wrong porn.

[@icanfartloud]

What is porn?

[@elwinkel90]

IcanFartLOUD, Porn is the Devil

[@icanfartloud]

what is the devil?

[@JuanPerez-yy5hr]

Pan does it protected from acid rain, bird droppings etc what product would you use to maintain it

[@PanTheOrganizer]

Hi John. It protects a bit more than traditional waxes or sealants, but like anything, if you leave those contaminants long enough on the paint, it will etch through. There is no magic coating that is bulletproof. This is like a supercharged. version of a wax or sealant.

[@aaronprudhomme8688]

Thanks a lot for sharing this video with us. As usual it was an amazing video👍😊. I'll like to try this product on a brand new car but I don't have a pressure washer😯. Would that be a problem??? Please respond..

[@PanTheOrganizer]

You’d at least need a very strong jet of water...

[@lukebrunton1507]

Hi mate! Does this work well as a windscreen sealant or would you recommend still applying a windscreen sealant?

[@PanTheOrganizer]

Hi Luke! I don't recommend using this on glass. You'd be better off with a true glass sealant like Aquapel, AngelWax H2GO, Optimum Glass Coat, etc.

[@lukebrunton1507]

Pan TheOrganizer Thank you sir.

[@kotomakosako]

I haven't used this CarPro spray, but I have used Gyeon Wet Coat. I wasn''t happy with it at all. That stuff doesn't last 2 weeks, that's how quickly it washes off. Hopefully this one is better.

[@PanTheOrganizer]

Try Sonax Spray and Seal. Up to 3 months real world protection and great gloss. I did a review here: kzbin.info/www/bejne/fKHKdYWJfMqhjbM

[@kotomakosako]

@@PanTheOrganizer Will do. Thanks Pan.

[@RayRay-em4vp]

Hi Pan, I'm an avid user of Carpro ECh2o as a quick detailer (for light dust and fingerprints) in-between my once-a-week washes. Pre-washing is done out of the sun (at dusk) using a garden hose foam sprayer with ph neutral non-wax shampoo, 2-bucket wash with Carpro Reset, leaf blower drying, then wiped dry with Rag Company Liquid8r. I also have Cquartz UK 3.0 as a coating that's about a year old in a NEVER-garaged daily driver. I'm very meticulous about my car, especially since its dark-blue in color and always outside. My question is = if I apply Hydro2 after my weekly wash but I still use the Ech2o quick detailer during the week, will wiping down the surface with Ech2o actually REMOVE the Hydro2? Aloha!

[@fcah333]

Do you use filtered /distilled water when detailing cars or just regular city water? Thanks Shawn

[@PanTheOrganizer]

I have a water softener system. Check out my video here: kzbin.info/www/bejne/e5CzZ6qIpJh1fpo And I reviewed my water softener here: kzbin.info/www/bejne/fWeZeoVuoLhjq7M

[@oscarmonge6797]

Do you wipe it off afterwards or you just allow it to dry on its own?

[@PanTheOrganizer]

Once you're done rinsing the car, you dry as you normally would.