The YZ250 Project is Coming Together Amazing! Part 12

[@chuck4027]

That bike is looking slick .But come on man pliers and a crescent wrench, I know you have the correct wrenches .

[@evilkin9997]

Smart looking machine can't wait till it's finished. Congrats on your 50k subs you deserve it and millions more

[@adampaganelli4891]

I appreciate that man🙏

[@laloutre3180]

I never tire of watching your work Adam 🤩😍 I wish you great success in your new project 😎

[@adampaganelli4891]

I appreciate that, thank you🤝

[@laloutre3180]

​@@adampaganelli4891 you deserve it a lot

[@wcbessinger]

Looking good! Looking forward to the final product.

[@adampaganelli4891]

Thank you👍🏼

[@bakersbuildingseries2342]

Nice! Can’t wait till it’s finished!

[@francis888milot]

You have to move the front brake line over the hand guard or you’ll kink/break the line when the forks compress

[@adampaganelli4891]

That’s a good point👍🏼 thanks!

[@gmeyer6657]

Meticulous work..really strong.Looks fantastic!! Your videos are getting better, you are much more comfortable in front of the camera too

[@Dirt_Bike_Dave]

@Adam Paganelli... Congrats on the 50,000 Subs and I can not believe your only 20 yrs old. Keep up the good work..can't wait to see this thing rip.

[@adampaganelli4891]

Thank you👌🏼

[@acedaugdaug838]

Congrats bro cant wait its finished

[@premixpeter1972]

Looking good man! 👌 Really digging that bead blast finish on the frame. And congrats on doing so phenomenally well with the youtube channel!

[@adampaganelli4891]

Thanks, I appreciate the support bro👍🏼

[@Cr_yyy]

Finally, been looking forward to this video!

[@wadepotter7608]

Where did you get your head stays for the phat head? I just recently bought a bike but they had some home made mounts on it.

[@robheathcote8561]

I have a tought for ya young fella, Bloody fantastic, glad i subbed. Really enjoy your uploads nd its great to see a young bloke like yourself smashing out builds like this. Dont stop Adam.

[@adampaganelli4891]

Thanks for the support Rob!👍🏼

[@UlisesGlez26]

It's a shame about the wheel but hey, this things happen to anyone Really looking forward to se the finished bike and some riding videos man!!

[@MyYamahaGarage]

So sick bro keep doing what you doing, flippen love these vids

[@adampaganelli4891]

Thanks man🤝

[@cahird6639]

Looking good🔥🔥🔥

[@AcousticNRG]

how aint this channel got more subs gj man 10/10

[@thompsonracing2294]

Great bike so far man! Just a little tip though, the spark plug doesn’t need that much torque, I would invest in some spark plug sockets and look up the specs. Pulling threads on a brand new jug 😖

[@tomatoknuckles]

Congrats on the 50k and best of luck with the new site👍 bike is looking sick so far man.

[@jamierobinson5394]

It’s going to look really nice mate I’ve got a 1989 kx80 that I am building I paid a shock linkage for it the other day I went to but it on the bike in I can’t get the bolt to go in the frame do u know what I can do mate

[@TheTomaiscool]

Cant wait for the build to be done >>>.

[@kyletriesfitness500]

Did you put gasket sealer on the sparkplug? Does it really make a difference to the compression 🤔

[@adampaganelli4891]

It’s anti seize

[@einoro6816]

@@adampaganelli4891 dont put anti seize on ngk spark plugs. NGK say that you shouldnt do it and there are many reasons for it. Just google ngk spark plugs anti seize

[@ethanlord73]

Dudeeeeee . So clean

[@adampaganelli4891]

Glad you like it!

[@Kibby96793]

Congrats Adam!

[@jdracing551]

Gotta route that front brake line over the barkbuster.

[@jimmadonna1436]

Adam congratulations! You deserve to have 50 k subscribers. It due to the content and your level of talent. I need a clutch cable so you trust all balls? I want to share something with you. I start Pro arm wrestling next week. I'm stoked about it. I'm looking forward to the FUTURE of the channel. ✌

[@adampaganelli4891]

I appreciate the support Jim. That’s sweet man, good luck!💪🏼

[@jimmadonna1436]

@@adampaganelli4891 thank you. I'm getting used to the table. It's completely different than sitting down. I'm undefeated sitting down.

[@Groot_G]

But why grease the spark plug thread? Does it not throw the torque figures out?

[@einoro6816]

He put anti seize on it. Never put anti seize on NGK spark plugs. Google it brotha

[@cbadnc9040]

Awesome videos! Keep it up brother!

[@adampaganelli4891]

Thanks man!

[@tylerharkness4964]

Where did you get your head from ? I’m looking for some but I’m in Canada and can’t find one

[@adampaganelli4891]

It’s from phatheadracing

[@endurol8888]

Dude I’m having trouble getting my bearings out my wish bone linkage. The seals n actual bearings have come but the outer bearing casings will not come out & on the wish bone you can’t push threw from one side. Think I’m gonna have to buy new wish bone !! Any tips

[@harro9447]

Mate i can’t wait to see you ride it 🤙🏼

[@ohboyyitzsbtv]

dang bro how do you know so much? I have 20003 yz250 and its leaking oil... I don't know where to start can u give any tips?

[@2strokemafiafilms926]

Looks awesome. I recommend trying a different exhaust though. Had fmfs on many of my bikes and then put pro circuits or scalvinis on them and really woke the bikes up. Just a recommendation. Love the channel tho man. Keep up the good work!!!

[@Cr_yyy]

Ok so I have a question, I see it on official lectron's website and a customer rep also told me you cant pair vforce reeds with a lectron yet clearly he is doing it. Explanation?

[@adampaganelli4891]

I haven’t heard this before. Send me the link to where it says on the website and I can check it out👍🏼

[@Cr_yyy]

@@adampaganelli4891 www.lectronfuelsystems.com/2stroke/yamaha-2-stroke/yz-125-kit.html It's clearly listed at the bottom of the website. It says the vforce 4 reeds will not fit and I contacted a customer service representative and asked if any of the other vforce reed blocks would work like the 3s and they said only the boysen valve will work. Which is strange cause I clearly see a lot of people using them.

[@Howboutdat354]

You’re doing an amazing job so far! I’m around these bikes all day every day and I’m amazed at the attention to detail you have. Still have some kinks you need to work out but you are doing amazing work. Keep it up!

[@adampaganelli4891]

Thanks Steven! Lmk what I can improve on, I am constantly trying to make the channel better for you guys👍🏼

[@oscarchamberlain4167]

Gave this vid a like love the build man keep it up

[@adampaganelli4891]

Thanks Oscar!

[@erichildreth7562]

Hey the YZ is looking great!!! I have a couple of questions for you...the tusk flywheel cover, does that need a spacer with it for the flywheel weight because I have to have one with my boysesn cover and my second question is on the front brake line, is there a reason that the hose is ran underneath the bark buster?? It almost looks like that brake line is too short. Just curious. Great video as always and can't wait to see the YZ all back together!! :)

[@adampaganelli4891]

Thanks Eric! The Tusk one doesn’t have any clearance issues which is nice (I don’t have the biggest size flywheel weight so maybe for a larger one it would need a spacer.) The brake line seemed to be coming out directly at the hand guard. It naturally was easier to put it below (I was worried it would rub more on top).

[@erichildreth7562]

@@adampaganelli4891 hey no worries at all and I did not know that the tusk would clear it, I have the 9oz flywheel weight so I have to use the spacer which is mo big deal and that's cool on the front brake line.

[@motomania2829]

Looking good man

[@adampaganelli4891]

Thank you!

[@nelsongaldeman]

The bars aren't aligned left-right side from the clamps! 😬 It makes my eyes cry! Nice work, the bike looks awesome!!

[@Groot_G]

You made me watch it again!

[@607Prod]

CEO of power tools

[@ericrogner2461]

Nice bike I have a 09

[@jonthelamb4549]

Those under armour shirts make my back itchy

[@dustinguriel620]

Dude Adam what are you talking about? Most of the aftermarket hubs use the same hub for big and small axle bikes. My brand new faster USA hubs for my ‘15 yz 250 have the big bearings too, there are two different types of spacers. I believe dubya also makes the spacers. Look around before you go back to that ugly stock hub bro

[@Vegardsorens1]

so sick!

[@sicks6six]

I knew someone who used a lectron carb on a 2T 225cc and he reckons it was the best carb he has used ever, dellortos, etc etc no where near, instant pick up,

[@adampaganelli4891]

They’re great carbs👍🏼

[@Goffens]

The bike is awesome no doubt about that but using a adjustable wrench for the sparkplug and powertools is in my oppinion a big no no on a dirtbike.... specialy the coolant hooses...

[@philvanvoo6756]

Wenn comes the next part?

[@nelsongaldeman]

Why did you cut it?

[@nelsongaldeman]

Oh, for the guards 😬

[@MateuszMateusz-cg8ll]

Greetings from Poland:)

[@minidraglife6732]

when the banshee shifter kart video coming

[@adampaganelli4891]

I’m working on it this weekend🤘🏼

[@user93634]

Giving me idea's for my 2019 🙂👌

[@thecollabstories533]

Yz250 masih pakai mesin 2troke bro,??

[@drewcecato221]

Dope

[@pedrofernando176]

Cara vai ficar top✌👍

[@zappymaddoggamingyt7440]

Just saying why worry about bling? After a ride or to it will all come off.

[@theravedaddy]

Hey Adam! Great video as always, i enjoy watching a youngster work like us old dudes. Heres a thing tho, you got a phishing scam locked onto your channel. Its 'TRAP TOWN HTC'. Its all over YT now and since ive been reporting it its on my vids too. Report and block it mate.

[@adampaganelli4891]

Thanks for your support👍🏼 I will look into that.

[@jeremyyork4924]

Bike is cherry

[@adampaganelli4891]

Thanks man!

[@kadend2669]

Just wondering why your wearing gloves to put things like a clutch cable on and those rubber covers

[@djokojunior367]

Enggine jettt..... 😅😅

[@marcruales8050]

I need parts for my gas gas and you guys don’t have parts for it ?

[@adampaganelli4891]

Sorry man. We’re just getting going and adding new parts everyday. Message me on Instagram and I can add up what you need👍🏼

[@calebmartin2457]

I wanna know why you cranked down that spark plug like damn, my 2 stroke sled doesn’t need the plugs to be that tight I don’t see why this would just don’t wanna see you fuck them threads

[@adampaganelli4891]

It’s really not that tight, maybe 10-20 foot pounds haha

[@justsomedude1726]

Don’t pay attention to these losers throwing shade in the comments. Your videos and work have taught me so much. I recently bought an 82 XL250R for 200$ as a project. Hopefully I didn’t make a huge mistake getting a four stroke as my first rebuild, just diving in head first I guess lol.

[@adampaganelli4891]

Thanks Brandon. Let me know if you need any advice or help with parts!

[@justsomedude1726]

Adam Paganelli I’m sure I’ll be hitting you up on IG for some advice at some point!

[@gojoe36]

You make me cringe.. 1:47. Were sending you back to shop class

[@alfredojimenez6199]

what i really think Adam is that you are great. But..imagine that somebody who knows nothing about mecanic and give you the bike for a big change..how much we will pay??

[@dirtboy896]

Sick build. That stupid ass generic youtube music is killing me though

[@andrewmulligan7309]

Just in case you don’t have one in your gerage. sandiego.craigslist.org/csd/mcy/d/san-diego-2014-yamaha-yz250-yz-250/7066821515.html

[@consoi527]

👍👍😐❤

[@AngleFX]

looks good, but the handguards are ugly af

[@mrblack3480]

I turned my yz250 into enduro also

[@R.C.E.MutationsUK]

I love what you and Cameron do but you both do the same bikes. With basically the same result and look. Why don’t you do something a little different? I haven’t seen a sxf 350 video from anyone yet 🤷🏽‍♂️

[@dr00andrew]

lectrons are a waste of $. you obviously know how to jet a stock carb just stick with that. washignton does not have high elevations like colorado and utah. waste of 500$