How to install an Alarm and Remote Start / Ford F150 / 5 wire Reverse Polarity Locks / DIY keyless

[@joeybuttafuocoovahea6202]

Dude you are a natural teacher! I can do everything I need professionally but when it comes to verbalizing coherently what I’m doing, 👎. Great job and Thank you! 🙏

[@Donnythelatemodeltech]

👍

[@xavi-12]

@@Donnythelatemodeltech you did a great video. Thank you so much. But I only have one question: 🙋 When I put the door lock relay only works in the DRIVER SIDE… what should I do to make work in the passenger side ?

[@LevelUpMechanics]

Holy S#!$ this is like a gold mine of info for installing car alarms! Great job! 👍💯

[@ulyvenalcantara3671]

wow, i'm impressed. this is the most detailed video that helped me understand each and every wires that was giving me confusion before.. thank you for explaining the use and purpose of each wire, whether they will be used or not used based on the preference of the driver.. very good job.

[@Donnythelatemodeltech]

Thanks and good luck with your install!

[@shootthemoon9549]

Just want to thank you for the 5 wire walk through. The wire colors were exactly the same on my Fox Mustang and I never knew what a 451m was. I've been fighting with hooking up this cheapo keyless entry for years, seriously years. The only way I had it working was by disconnecting the connector to the passenger switch and that made the driver switch not work either but the keyless entry worked on the driver door only and I accepted that it's the best I could do. Watched your video ordered up a 451m and within 30 minutes everything is working the way it should. So grateful, thank you.

[@Donnythelatemodeltech]

👍, thanks for sharing.

[@michaelmarquez6133]

That’s awesome man! I miss my mustang, I had an 85 5.0 convertible baby blue. People would ask me if I’m selling it everywhere I went !

[@trystanellefson2947]

This has by far been one of the most informative videos that I've seen related to this system. You NAILED the instructions and took out my need to ask any questions and now I know for sure that is the system to get for my truck as well. Definitely subbing!

[@Donnythelatemodeltech]

You just made my day! Best comment I've got in a long time. Thanks hit me up on IG if you need some help.

[@JW-rv9cy]

Thanks, after racking my brain over schematics, that last 4 minutes was all I needed! The sound of my doors FINALLY unlocking and locking using the remote were music to my ears

[@secessionnow4133]

Thank you. KZbin is fill with garbage videos on how to install an alarm. I had to watch a lot of videos to find you. You are a better version than Chris fix it.

[@Donnythelatemodeltech]

Lol, thanks!

[@lucasornelas6113]

Thank you for this video ! My 01 Camry was stolen a few weeks ago I had no alarm I got the vehicle back with a busted steering column and ignition switch , I didn’t imagine how easy it is to steal older vehicles. I watched tons of videos until I felt confident I could do it and followed along your video I officially have an alarm thank you ! I will never go without an alarm on any of my vehicles ever again thank you again brother !

[@Donnythelatemodeltech]

Glad it helped

[@joshjohnson2736]

Amazon has heat shrink connectors with soldier in the middle. Just heat it up and it soldiers the wiring together and seals it up. Great video

[@jacobw4545]

Awesome video helped me out a ton. I finally have keyless entry on my 2000 7.3. That alone was worth the 150 I paid for the remote starter and the remote start is just a bonus for me. Thank you for the great informative video I couldn't have done it without you.

[@brandonzink8283]

I’m so glad I found your video, there’s no good ones out there for these systems and I was struggling to understand everything, but now I can tackle this confidently, I’ll be watching a few more times during install and then my jeep will be secured

[@Donnythelatemodeltech]

Awesome

[@brandonzink8283]

@@Donnythelatemodeltechso the orange accessory input and the pink ignition inputs… do I just connect all 4 to the ignition wire in my jeep? And then remote start lines, one to ignition and one to starter?

[@leonhart2178]

worked at best Buy for 15 years and in my time as a mobile tech with them, I have never used a tap connector on any alarm install. We were required to be MECP certified and we were told by the company to always follow best practice and were not allowed to use tap connectors on alarms. I saw a bunch of alarms installed at other places that used taps and we would fix them when they failed.

[@jamesrennick8192]

You're the man brother! That tutorial at the end is the gold I've been looking for! Thank you so much!

[@imadjawad4408]

the only video I found on KZbin, explains very well how to mount Viper's system, thank you! BTW mine is the 5706V, I couldn't test full functions on a bench, it always gives a remote start error on the remote screen, I routed all other sense wires like the parking brake, brake shutdown, hood, and doors accordingly, and the tachometer wire is intended for" manual trans only", and their crappy documentation doesn't have any schematics, I like how you grouped the wires, good job!

[@HelicoolsHelipad]

Thanks my good man. Installing this in a military surplus vehicle; M1078 LMTV. All wires are white in the vehicle. So, nice that you also put the probe and INNOVA items in the description. So helpful. Planning on adding power locks and power windows later... so this system was chosen.

[@Donnythelatemodeltech]

Thanks for the great comment .

[@HEAVYMETAL0209]

What an awesome video... I am replacing old alarm that has failed with the Avital 5303L. Your lay out and description of all the wire was a perfect... I can now easily install this alarm! Going to add things like rear deforst and maybe to turn on heated seats. Thing to find tach signal on a diesel Excursion will be fun. Thanks for your help.

[@safirkassam5664]

Thanks for this, this video gave me the mojo to do it myself, and I did. Was happily prepared for all the wires after watching.

[@Donnythelatemodeltech]

Glad it helped

[@JuanGarcia-kl9xl]

Man this is by far the best remote start install video out there! Thanks man

[@Donnythelatemodeltech]

Wow, thanks!

[@noahglinsman3832]

Seriously! The best guide/tutorial out there! I’ve had my dash torn apart for two weeks! Now, I’m thinking I’ll be able to finish it today. One request: I didn’t see the link for the website with the wiring chart that you used. I could have missed it, but if not, could you add that to the description? Thanks for this great lesson, I’ll be watching all your posts, just because.

[@tychi707]

yeah i order this alarm today but also dont see web site for wiring chart

[@orlando9627]

Straight forward and professional. Great video.

[@billybassman21]

The dude you installed this for was no fun. lol Love having the horn hooked to the alarm, way more effective at attracting attention. DEI alarms by default only honk the horn on a full trigger. Warn and arm/disarm will just chirp. I actually turned the arm/disarm chirp off on mine, no reason to have it with a 2 way remote.

[@Donnythelatemodeltech]

What's up with the dude?

[@williamstone2335]

Thank you soo much for this. Why do you have to mount the shock sensor to a wiring harnes. Shouldnt you mount it to a solid bracket under the seeing wheel.

[@michaelrose4103]

Best alarm/remote start video I’ve seen. Thank you. Very helpful

[@LastcallRecovery]

Jam up I wired my 94 f150 it had the five wire. Good info. The alarm was a little overwhelming at first.

[@johndillon7758]

Absolutely great video! I’m going through the MECP program and you made it all look easy! Thank you, I greatly appreciate your time and help!1

[@Donnythelatemodeltech]

Cool Brother, MECP , nice.

[@ilyasnz7697]

Your this video is excellent teaching to new person thank you. I'm going to install Viper 5904v in my 1993 RX7. I already have Viper 800 installed in 2001 just upgrading to 5904v. I have 4 extra relays installed in 2001 for it. Do I still need those extra external relays or 5904v has its own relays inside in it? You doing excellent teaching. Regards 🙏

[@jorcast]

The best posible explanation of the installation. 👍👍 I was stuck on the remote start part my car try to start but not turn on. with your video Icould see my error and finish the installation. Thanks you very much.

[@navydad82]

You killed it!!! Amazing tutorial!!!

[@robertsmccall]

Nice vid! Did I miss the link to where you got the vehicle wiring info?

[@alanarmentasandoval7789]

Yea I’m wondering the same thing?

[@RogerSayers]

Same here, I can't find the link. Hope he will respond and give up the link. However, I need something for the 1996 F350 diesel 7.3 L Power Stroke. Not sure if the wiring is the same.

[@emmanuelvelazquez9640]

@@RogerSayers hey bro, if by any chance you found a link for that truck send it my way I have a 95 f250 7.3 diesel that I will also be installing an alarm in

[@1186javierzuniga]

I was able to look at the video closely and saw on his phone that it was the12volt.com website that is easily navigated.👍

[@TheKingofparis148]

By far the best install video for this

[@freedomrain126]

Just finished install on my 1992 F150 XLT. The lock unlock wires on mine were reversed from video, used the 451m. Tach worked, didn't have to learn it. Also unlock was good. Any info on changing crank length? Unable to find anything on it. Thank you for the great video!

[@richgreene4517]

Great video. Can you share the link for the vehicle wiring diagram? I’m doing my ford 2013 e150 work van. What’s your recommendation on where I tie into for my tach? Thanks again.

[@goingafteru2]

Great video! I’m installing the viper 5706 , I’m having trouble with the 6 pin connector (where does the white/brown wire, white wire, and orang hook up to I didn’t see that on your video can you help me out please and thanks.

[@cheefn4u217]

I have the same alarm did you have to use relaysin the truck I have a 2008 grand prix

[@joshwinn2680]

Thanks for the video! I did not see the link in the comments for the website you used for the F150 wiring location. Thanks again!

[@KrisKYL]

I remember when I use to do this for a living. I had my auxiliary outputs to turn on the stereo, neon lights, roll up and down my windows 😂😂

[@funkcrewbandonly1]

Your Video was very good and explained with excellence. I just couldn't understand one thing. what is a "5 wire?" The part at the end of your video you were explaining. I have a 2004 Ford F-150 with remote entry. The Alarm that came with the truck (Lojack) was disarmed and doesn't alarm if you bump it, Only opens the door's with my remote. Could you explain more detail about 5 wire? Do i need to apply this for my ford for my door's?

[@robertward5642]

So in theory this should work to put a compustar 7900-as system in my power stroke? And just hook the diesel wts wire up?

[@rhettkramer804]

Amazing video! Very informative and nicely done job that you did I copied you and did it to my 96 f150 xlt power everything with factory keyless entry basically the same setup as the truck in the video. I have a small problem though of my door locks will lock with the switch but not the remote and I know in the video you said I need to reprogram that but everytime I try to it goes to garage mode but it did program the tach wire just fine and everything else works great so I thank you very much with that!

[@joshuakindsfather7101]

Hello I was wondering if you had any information on how to install a car alarm on a 2011 Kia.

[@ReneA-d8d]

Super informative video. Finishing it up now except I don’t have the extra accessory wire. Yellow with grey. Just one grey with yellow. How do I find the 2nd one out of those yellow ones?

[@yeahididit9054]

i have been going insane trying to get this thing to work on my 1993 Cadillac Fleetwood brougham , i went with this cause it was DEI product and I've installed a Clifford in remote start in a 94 just like it as well as the 3100 alarm however 3 DAYS IVE BEEN WORKING ON THIS and i have a Service manual for the vehicle im going to get the add on deal to hopefully get the positive looks to work that you suggest and if that doesn't work I'm going to rip it all out and go another route great video and information

[@yeahididit9054]

i just dont understand why the alarm isnt working i have factory keyless entry ugh

[@adrianbonnici592]

Hi, does this alarm come with a fitted proximity sensor please?

[@SpencerMarks-lg6he]

Hi, I have a Viper 5704V which is similar to this but I have a 6 pin main harness. All 5 wires are the same as yours but I have an additional brown and white parking light isolation wire. Do I need this or can I just cap it.

[@CarswithDez]

Thanks a lot! I’m doing a 93 mustang GT and I just found out I have the 5 wire reverse polarity.

[@JoseMorales-xf7hl]

my truck starts with the remote start but not with the key, what could be causing that?

[@jubzuk]

These videos of yours are amazing, really in depth, appreciate the knowledge sharing, will be trying to install some car alarm kits soon. earned yourself an eagle eyes viewer who will be watching alot of your videos. stay blesed man. Had this same kit (Avital 5305L) installed on my BMW E46 aswell but by a professional. this helps so much for future installs, will be taking this knowledge foward.

[@Donnythelatemodeltech]

Thanks for the awsome comment. 😀

[@fuelpro1]

Thank you so much. Your video was a huge help in wiring my Bronco alarm.

[@Donnythelatemodeltech]

🍻

[@tattoojones23]

Outstanding video sir. Very simple instruction and reference.

[@maj1k85]

What was the link for the wiring guid you didn't put it in discription I have a chevy cobalt 2006 and wanting to add and electric start and start button

[@1badz239]

Nice truck. Haven't seen one of these in a while.

[@GreenTurtle261]

I’m interested in putting an alarm on my f150, I’m not fully interested in the remote start feature just want to unlock/lock the doors since they’re manual doors. Should I still get a 2 way alarm or just the basic 1 way?

[@travish2632]

So I've got the remote start working perfectly I've used a 451 relay for the door locks spliced them in my unlock switch has always worked on my passenger side but neither switch on my driver works. I click the buttons on the remote and can hear the relay click but nothing happens would this be because my master switch is not working properly? The passenger door unlock still works spliced in the relay

[@Grady_OBS]

Can you install one for just the keyless start? I have power locks and whatnot but I just want a keyless start (mostly for winter durring cold seasons)

[@davidfuentes778]

Hi I followed all the instructions you showed in this video everything worked but the starter wouldn't turn over do you have any idea what it could be thanks

[@mikelgates6314]

Would this be the same format for a 2003 Toyota Highlander

[@lilg1976]

Would this install be similar to the 1997 f150

[@Legendary_Frank]

How do you make the fob light up orange

[@TheHbarreto]

Hey sir I get this alarma for accident a vital model 3305l do u think is same do u have in you truck bc I have Ford f150 95 I want know if this work good for my truck thank you and good videos

[@jensenwhittal2349]

Hey quick question can I do this same thing with the compustar 7900as?? Like I have a 1992 ford f150 and really want an alarm will that b able to work with my truck?

[@aharris878]

Do you have any tip on installing..on a 2003 f150. 5906v viper

[@jeffreyeiford2750]

Hey Donny i have a question about the Armed LED light. I have an Avital 3100 unit im installing on my 2003 F150. question is can i use a larger LED unit ? i have a hole i need to fill on the surfboard on my dash ( 2003 F150 ) ,, can i use a bit larger bulb ?? thanks. Jeff

[@bertongallegos5861]

thank you ,sir was looking for just this type of video with same system got it wired on 2005 ram works beautiful thanks for your knowledge took a lot of confusion out of it

[@craigberube9890]

Is there a way to tell which brand I have ? Starter came with my truck ! My remote does not look like yours . Are the wires all the same regardless of the brand?

[@griffengranados619]

First time doing this in my life and I’m trying to throw a 5706v in my z32 jus one question i need help w is the key side and car side definition

[@dilroneedasilva1248]

hey...good content...what's the name of the website with the vehicle's wiring ??

[@Oddfellowspodcast]

Best tutorial by far!!!

[@MrCjmcqueen]

Great video!!!!! What was the green wire for on the shock sensor? Is it needed? Also how to wire up DOMELIGHT SUPERVISION is a relay needed and is it the black/yellow wire in the 24pin connector?

[@himynameisluis13]

Would it be same the concept with the simpler 1 way set up?

[@Donnythelatemodeltech]

Yes

[@lukemilesdesign]

Would this work if I didn't install the alarm? I want the remote start but don't need the alarm. I don't have power locks so it wouldn't work.

[@87SSBOI]

Great vid!!! Best tutorial on installing an alarm!!! I will definitely be doing my own now that I've watched your vid...thanks🦾💯

[@angeljmadrid]

Insane dude. Only one I could find

[@frisson38]

I have toyota verso with anti-start pedal , can i install this system in my car

[@richardhull8193]

This video helped me out a great deal installing a Viper 5906v in my 95 Ford truck. Thanks for posting it. Quick question, my o/d light flashes when I remote start it (e4od auto trans). Just wonder if the customer in this vid experiences the same thing or if there's a quick fix for it. Other than that and a few issues programming the remote start functions everything was fairly easy.

[@swk1610]

Great video but I hooked one up to my 93 Bronco and wired it up exactly like you did but the remote start will not work. Everything else works it when I press the start button I get no voltage on the starter green or purple? Anyone have any idea?

[@MrHappy718]

Great video would I be able to do this same set up to my 1988 f350 all my doors/ windows are stock manual What do you suggest I do

[@AskRemy]

23:02 is a sign of a tech that lacks experience. Never ever use test lights of any kind. Only DMM's are allowed. The exception to the rule is with early model vehicles without air bags or sensitive computers. The test lights do pass signals onto the wire you are probing. They can and will deploy an airbag or damage sensitive computers.

[@Donnythelatemodeltech]

😆 🤣, wow. It's been 16 years since I did that shit for a living, and , hmm, I do own a airbag save test light, and know how to use a meter. Funny. I'm pretty confident in this easy remote start, I started installing remotestarts when these trucks were new. Let me guess your a MECP certI installer,, FYI it's a dead-end career. You should check out my other alarm video, I think i use a meter and test light.... it might be the airbag safe, I really can't remember. Please keep commenting this is fun.

[@poolsharkkkkk]

how loud is the alarm in person?

[@Cisco_927]

Thank you for this great tutorial and it wasn’t boring, I do have a question cause I have a viper system but the remote start stopped working is there a quick trouble shooting I could do before taking it to the alarm place

[@Donnythelatemodeltech]

step one - check the hood pin switch. Hit me up and ill help you figure this out .

[@aaronn9398]

what wires dont you need if you dont want remote start?

[@juanmaldonado7204]

Hey do you know if I need a relay for a 2 door 98 Honda civic for a simple viper keyless entry? I can’t get the viper keyless entry to unlock/lock.

[@miked4147]

Hello, Great video - very instructive - I bought the Avital 3100L model - very similar but without remote start. I also bought the Install Essentials 451M Door Lock Relay Module. When wiring the door lock relay I think I wired the relay incorrectly as the door motors kept triggering when it hit the unlock button on the remote until I unplugged the harness to stop it. Now I wired it correctly like how you showed and only the passenger side locks/unlocks. Any idea what could be the issue?

[@insomnimike3453]

Do you have to use all the accessory wires from the alarm system? or can you remove some from the remote start system

[@Donnythelatemodeltech]

No you don't , it required to use all the wiring if they are outputs

[@esecorks]

Any recommendations besides the alarm to use remote start on 02 f150 ?

[@rubenrodriguez4863]

Questions 2004 F-250 super duty diesel. I’m not sure what to do with the grey wire. I can’t seem to find where that one needs to land? Also how to handle tach?

[@griffengranados619]

The only thing I’m still uncertain of is the key side car side terms still throws me off a bit when I cut the 12v constant the wire still attached towards the steering wheel is considered key side and the wire going away would be car side ?

[@Donnythelatemodeltech]

Correct.

[@mathewjasso-p9e]

Great video ! I’m attempting to instal the exact system on my 1994 ford f150 xlt . The issue I’m running into is the truck will no longer start . It cranks but won’t start. Can someone help ?

[@freedomrain126]

On my 92 f150 xlt I forgot to plug in the fuel selector switch back in. I could always hear the fuel pump come on after turning on the key so I remembered that I didnt plug it back in.

[@bigjjbrown16]

@donnythelatemodeltech hey I have the avital remote start that just does door locks and remote start (I use the truck release to my air horns lol) ,but I put this system in my 96 f150 5.0l V8 and I did step by step between 2 or 3 wire guides and my little issue is (sometimes) occasionally the starter wont disengage unless I either turn off the system or try again or dont try it again until another day and it works "ok"

[@AlexG85]

I installed viper alarm same way you did in video, battery keeps draining I have to keep remote starting truck every 2 days to keep battery dropping below 11.8v by 2nd day. Is there anyway to prevent the power draw from alarm system? I also installed the viper smart start which allows me to gps track, remote start, unlock and lock with phone. Installed both at same time, do you think it’s the viper smart start killing battery or the viper alarm. Also the viper alarm killed my coil twice. Day one of install and a few months later. Any thoughts on why it keeps killing coil?

[@sambell9798]

Great video. Thanks man.

[@jamesthef250guy6]

So my question is. I have a base model 1993 F250 xl with no power options. Would this still work on my truck since I don't have power locks?

[@Donnythelatemodeltech]

Oh yeah

[@jamesthef250guy6]

@@Donnythelatemodeltech so it will work? Sweet this is what I been looking for in the winter time

[@deadspeed6679]

How do you wire a 2 wire reverse polarity with the 451m ?

[@jameshood3692]

Is the viper smart start any different on install?, installing on a 96 bronco that has factory keyless entry

[@alexchatwin9767]

Set this up on my 94 F150 and it worked great until about a month ago when I came out and the battery was dead. I bought a new battery, installed it and all was working until 3days ago when the truck is just locking the doors repeatedly and I cant get into the truck. Ideas on what is happening?

[@Papalegba22]

That dark blue wire on the 20 pin should never be cut off. It's used to activate the bypass module to get past the factory immobilizer.

[@jzflsrtis300]

I see you didn't used any relays, but you m guessing because if the alarm has already positive/negative triggers

[@tylerbrooks5150]

Got another question my dude could i just use the remote start harnesse and just forget about the rest or do i still Have to install the other harnesses

[@Donnythelatemodeltech]

Install everything

[@asaelmendez7781]

Where i can find my diagram for 2018 gmc sierra

[@marlionisaac8072]

Have you install a Car Alarm Security system on a Acura Legend Sedan Door 4 1993?

[@Donnythelatemodeltech]

Probably 20 years ago.

[@johntodd8565]

Good evening. After watching your videos. I was wondering in the end when connecting the remote start wires, you didn't show all of it. Me & my dad used the video to install his alarm/remote start but got stuck on the think pink wires.

[@Donnythelatemodeltech]

was up? same truck?

[@johntodd8565]

@Donny The Late Model Tech no, it would be for a 2005 ford explorer sports trac & a 2006 ford f150.

[@Donnythelatemodeltech]

@@johntodd8565 what's the issue?

[@johntodd8565]

@Donny The Late Model Tech so my dad has all the wires but the pink wires from the remote start harness hooked up. We watched your video but it didn't show which wires to hook them up to