Them 909 Follow-Up Review

After skating Them skates for a year, there have been some new things I've noticed. This video covers all that and how well the skates have held up. How durable Them 909s are? & How long you can expect Them Skates to last?
Buy my set-up in the US
Them 909 Moopi pro skate: oakcityskate.c...
Intuition Premium liner: oakcityskate.c...
Laced Laces: oakcityskate.c...
50/50 Prime Frames: oakcityskate.c...
Chroma Chynna: oakcityskate.c...
This was the first video I edited on Divinci Resolve
More of my stuff
Twitch: / buzzcutbrandon
Patreon: / brandondrummond
Exclusive Videos: / @brandondrummond
Instagram: / buzzcutbrandon
Laced NZ - My Merch: www.shop-laced...
TOP SECRET DISCORD, TikTok, Twitter, Subreddit & more
linktr.ee/Bran...
#rollerblading #themskates #aggressiverollerblading

[@justanothernoobe]

This is why I love The Internerd ... I'm just trying to get into skating and this review has just saved me from wasting some moolah - if only for the fact that my odd body runs hot - especially my feet, so your comments around the plastic structure changing with heat seems pretty relevant to me. Thanks for taking the time to post this :)

[@thakid691]

I just purchased these skates . I haven’t skated in over 8 years . My last skates were “Deshi carbons “ excited to try them out

[@chilli-iceolive-abode2447]

I will concur the laced laces do a good job on the 909s, I use them to really crank down and bring the high volume shell together more 🙌 I really enjoy the skates and as a 275er I'm eagerly awaiting the Shmedium!

[@MrJon326]

Same I can’t decide if I want to get a small 909 to try, or try new skates. 9.5 shoes but the mediums just seem a bit too big

[@kwstasyoyopapadopoulos8896]

Finally! I was waiting for this review cause i wanna buy the 909...Thanks Brandon

[@thewise_1one856]

Make sure you buy the new generation 909s, dont go for some cheap ones online. The new boots have harder plastic & better hardware. The company literally started less than 10 years old, and each year they have only improved, they have come from cheap plastic to harder plastic. I dont blame THEM bcus ant time you start something new you have to work with what you can afford and maximise the next time with the profits from the first time.

[@mattvalade2609]

I have owned 3 pairs of 909s Two aggressive and then the 80s All three are the original laces for breakfast in two or three sessions Even the 80s just skating with my son they destroyed The laces But other than that My favorite skates With the intuition liner and my wide feet i can wear them for hours with little to no discomfort Great video

[@christopherseistrup8493]

The Fruittech hardware is Torx not Hex. Totally agree on the laces. Love my Pat Ridder 909s. Great Vid.

[@thewise_1one856]

Gary from Mushroom Blading would say, Cuff position ALWAYS LOW.😂

[@MushroomBlading]

You have inspired me to try high for a session.

[@almostremembered]

Great long-term review, Brandon. Not sure if you've already done this, but linking this on IG and tagging THEM could go a long way. They listen, as you know. I'd love for them to use better plastic on the soul plate and fill in the buckle protector with plastic. Cuff bolts are another issue although I love the design. Hope they can keep the design and make them better.

[@scottlazzarotto3065]

Those are in great shape for a year old. When I was skating and pushing myself, I would go thru 2 pairs of skates a year, street skating. Thx for the content.

[@joew666]

I've got "fake" laces on my 909 as suggested by Austin Paz. I didn't need the boot to be tighter. Love not having laces to tie.

[@t3chno0]

Same here.. Game changer IMO.. Who needs laces? (sorry Brandon 😅). Too many positive effects to ignore: - No more wasting minutes tying/untying laces, perfect tightness every time, you can put you skates of and on hella fast, no more laces dragging on the floor or looking floppy, etc, etc..... I bought 100mm of 3mm elastic cord of Amazon that will last my family generations😅😝

[@jadrollervlog]

I think the clacking you were getting was something I actually liked about older them hardware. Depending on the wheel, bearing and spacer combination, the older them axles would tighten on themselves before they tightened down on the bearing and spacer. I actually preferred that even though it was clacky. But that way if you had a bearing spacer that was a smidge off you wouldn't crush your bearings. On my newer them frames I think they changed the axles and I noticed that it doesn't do that anymore. However your spacers need to be right so that you don't crush your bearings.

[@t3chno0]

BTW.. You can fix the wheel clackiness by using adjustable spacers by WICKED like CJ Wellsmore and Jake from Loco Skates suggested. It's due to small differences in tolerances with different wheels/cores

[@marquisb2016]

My first day skating a brand new pair of the Them 909 Moopi skate, my cuff bolts popped off after doing 2 royales. Unfortunately, I was unable to find the missing cuff bolts and screws. So, I bought Fruit Tech hardware to replace the missing cuff bolts and screws. Unfortunately, the Fruit Tech replacement bolts, which I secured tightly, also popped off after several royales at the skatepark, yesterday. I spent half an hour searching for the missing bolts and screws but couldn’t find them. Like your skates, Brandon, the plastic on my skate’s cuff is extremely flexible and abnormally bendy; my guess is that the flexible plastic is, in large part, the root cause of my cuff bolts popping off. I’ve been skating since 1994 and never experienced such cuff issues on any of my skates until I began skating the Them 908 and 909 skates. It’s a tough position to be in because 1)I love the aesthetics of the skate; 2) they fit well; and 3) I want to support Julio and a skater owned brand with grassroots origins.

[@Franz_giblet]

Have you tried using blue Loctite on them, the rockerable cuff on the aeons does the same due to the cuff moving backwards and forwards loosening them. If you put quite a lot on it worked on my aeons.

[@t3chno0]

First thing I did when they arrived is remove all the screws and put loctite on them. Not a single lost screw.. I did strip one soulplate receiver though.. but Jon Julio was kind enough to give me a free set at winterclash 👌.. Still bought. A bunch of spares just in case. I also had my doubts on the Thems for many reasons.. And I'll i can say is they are the best skates I've owned. Go for it... All boots wear down fast (depending on your usage) . I saw a AG10 carbon cuff buckle protector worn all the way down the other day same way as Brandon's 909s. Nothing is indestructible

[@t3chno0]

Oh.. I use red loctite.. Not blue

[@keeponblading]

That flex in hot weather is pretty bad and I did not expect that. Let's hope they fix that by using better plastics in the future!

[@valoroll1]

As someone still skating the black gen 1 909. The longevity of this boot is amazing. I've gone through 3 soul plate sets and the boot is still holding strong. However it feels different after switching to the gen 2 sway souls

[@Redn87]

Right ON!!! how is it for wide feet?

[@almostremembered]

I love THEMs but I do think the quaity could be better. Especially considering the minimum price for a complete skate is $340. 1) Fix the cuff bolts (but hopefully keep the look as they look awesome) 2) More durable soul plates 3) Better plastic on the cuff and maybe the boot (boot seems fine though?)

[@tokalov_]

Hi All!! I have a 908 3rd year, 6-9 hours a week. mine look much better. Broken 1 buckle. rust on rings. the regular liner was torn at the top at the edge of the boot, from the laces and in the places of the cafe bolts. The soul plate wears off quickly after a sess slide, from the pipe groove 3 mm. the cuf is just as soft. I only ride in the park. Now I want to order a liner and a cafe from 909 to lower the fit like on carbons.

[@tawmifm]

Maybe the cuff flexing is because of the swirl pattern? I've never seen that happen to any other skate... but I've never seen it happen to the Brain Dead boots so it could just be a weird defect

[@swissblader8037]

I hope Them will create once a skate with a shell for slimmer feet because I can not skate with these skates. They are too wide for my feet.

[@machansb]

Interesting call on the cuff feeling soft. I'm currently in North Queensland and the summers here are crazy hot. I wonder if they will suffer in the heat? Hate to get a pair and feel like they have too much flex all of a sudden ?

[@dimivouno]

I feel the same floppyness after one hour of skating 😕

[@tokalov_]

Oh yes! in order not to wash the cuffs and buckles, I wear wide trousers that cover the boot.

[@AmassMoreMoney]

Will you try down sizing when the new shell sizes are released?

[@kumbackquatsta]

kinda cheap that the buckle protector bump is hollow

[@t3chno0]

Same on the AG10.. And they are not exactly cheap😅

[@malikfixie]

@@t3chno0 AG 10? carbon cuff

[@jasonanderson7020]

whats everyones opinion on the Razors Shift Andrew Broom Agressive skate?

[@xxslysinxx]

Whats the difference between the Marius skates and the normal THEMs? Why is the Marius more expensive?

[@BrandonDrummond]

They are the same. The Marius ones just have a royalty for Marius the pro skater added on. This is the case for all the "Pro skates" Them sells. Thanks for watching 🙏

[@erielpol9997]

Bro, the sizing, if I m 27cm, what is the best size? The 8,8.5 or 9,9.5❓ HELP, im fro Puerto Rico and in here we don’t have stores that sells THEM‼️🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🔥🔥🔥🔥🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🤬

[@BrandonDrummond]

Go with Medium (9-9.5)

[@erielpol9997]

@@BrandonDrummond the Pat Riddle fit the same❓❓❓

[@BrandonDrummond]

@@erielpol9997 Different fit to my Moopis. The liner on the Ridders are much nicer. But yes same sizing. You're in the common bad spot where the small is too small, but the medium is too big. It's better to have room for your toes than to be in pain. SIze 9-9.5 is your best bet.

[@erielpol9997]

@@BrandonDrummond thank you bro, god bless

[@lmavrykl]

kzbin.info/www/bejne/apeloIuvhb-rgKcsi=DWdVGi9Tejuu8GX2&t=208 If you hear this “click-clack” sound, it’s time to change the spacers on the frames. I had a similar problem. I installed one new spacer per axle and the click-clack sound disappeared. Maybe it will be useful for someone)

[@wheelsceneblading]

I'M NOT EVEN COMMENTING ABOUT THIS VIDEO! WHY WERE YOU NOT AT WINTERCLASH? WHY, BRANDON?! ANSWER ME!!! You were sorely missed.

[@BrandonDrummond]

😆I wish I was there. I couldn't afford the trip 😢I'll be there some day

[@cornholeyourmom]

I use 45 inch waxed laces from Derby Laces. I feel ya on the plastic changing and feeling like your cuff is loose. I've been retying them, and redoing the cuff strap when this happens. Usually feel better after that

[@kingrando]

Maybe don’t reach out to Them. My soul plate was warped and my aluminium frame doesn’t sit flat. Julio never got back to me. I cut my loss, but that’s sad, as I don’t think I have bought new Them skates since then. I did buy about 4 pairs of Them skates prior