This thing prints SMOOTH! | ELEGOO SATURN2 8K

SATURN2 8K: www.elegoo.com/products/elego...
BOBA FETT 3D SCAN: cults3d.com/en/3d-model/art/s...
RESINLAPSE CABLE: resinlapse.bigcartel.com/prod...
I make videos with the help of direct support.
If you would like to help Steady Craftin keep on going (and receive some extras too), please consider becoming a direct supporter here:
PATREON
/ steadycraftin
DONATE WITH PAYPAL
www.paypal.com/donate/?hosted...
STICKERS, PINS AND FIGURES WHEN AVAILABLE FULFILLED BY US:
shop.crafnation.com/
MUGS, SHIRTS AND MORE FULFILLED BY SPRING:
steady-craftin.creator-spring...
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.com/RDVIDMICPP.html
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”

[@TheCrafsMan]

DO YOU ENJOY MESS LIKE THIS? :D WOULD YOU LIKE TO HELP ME CONTINUE MAKING VIDEOS? Please consider supporting us: www.patreon.com/steadycraftin

[@PhonePhone-sf8te]

and then 5 months of crickets. where's the steadycraftin instead of sporadic craftin?

[@StudsonStudio]

Thank you, Crafsman and thank you, shop baby! I know you already know the rules, but for anyone else that is thinking about getting a shop baby, remember: never expose it to sunlight, never get it wet, and never, ever feed it after midnight

[@TheCrafsMan]

My man always bringing it with the PREMIUM comments! 😆

[@JoelJDurick]

Shop baby is probably the creepiest, yet still most wholesome thing ever:) Crafsman, you're awesome!

[@ColonelSandersLite]

I uhh.... Hope crafsman locks the doors at night.

[@trollrx]

Shop baby Chucky

[@zendixie]

You were missed. Animation is not easy and it’s not quick . Seeing this has made my day. We were worried that something had happened.

[@rorylaubscher3208]

Ditto. Are you ok Crafsman?

[@dust195]

Happy to see the cast of zany characters continue to grow with the introduction of Shop Baby!

[@Vaasref]

Are you implying that Free Range Chicken is zany ?

[@JTShine]

Crafsman is a national treasure and a beam of bright light in dark times. Keep being you buddy!

[@ebmage8793]

Take breaks whenever you need to Crafsman. The thing I love most about your videos is how you pursue whatever you wish and you put your all into it. It reminds me of how I used to be as a kid/teenager exploring art. I have a boring 9-5 in corporate graphic design, but I miss those days of freedom and your videos make me feel warm and nostalgic for those days again.

[@2degucitas]

I can relate. I was always good at art, got a degree in Art and worked in a graphics shop, printing shop, and graphics dept. in an engineering company. I was so bored, unsatisfied and burned out. All my little crafty like projects I enjoy because the enthusiasm, motivation, curiosity and problem solving is there. You'll find your grove again someday.

[@DaddyBooneDon]

I was a professional animator for 20 yrs, so I can appreciate how much work it took to do your animated videos. I'm not asking you to continue the animated vids, I'm just saying you did a great job. That was a bonus for me, because I tune in to watch your mold making. Anyway, I love what you do

[@ih8stuff3]

CrafsMan, I must apologize for my truncated attention span. The KZbin algorithm doesn't recommend videos from channels I haven't watched in awhile, so I almost forgot about you. I'm glad to have rediscovered you, and your videos are more impressive than ever. Merry Christmas 🎄 Keep on keepin on.

[@MrPooreboy]

This is the first craftsman vid I’ve seen. I kinda want this person to narrate everything I watch, including guided meditation.

[@rainbowditto9033]

The leitmotif that kicks in at 15:25 has become sort of nostalgic to me, not gonna lie. It makes me think back to when i first found the channel, in the middle of summer watching youtube early in the morning. Hearing it in this video was such a pleasant surprise ^^ all of your music has become kinda iconic to me for the same reasons :) !!

[@PantsMan13]

Worth the wait. You are doing something I am unable to do, and I love it all. Take all the time you need to keep yourself happy and healthy. We will be here.

[@suicidalkatt]

Cafsman just the fun little comments and silly things you do during your videos is really what drew me into this channel, on top of all the fantastic quality work you do. Your videography and sound design always is a step above the rest too. Thanks for what you do and I appreciate your dedication to the craf :P

[@captainsergeant]

Better a shop baby than a demon baby! Also, when shop baby started opening up the box I got instant flashbacks to a certain scene in Pet Cemetery.

[@Telmach]

3:47 the attention to detail in shots like this to have a reflection and to even puppet with the speech. *Chefs kiss*

[@AnneIglesias]

I will likely be getting this printer within the year or so with the amount of D&D miniatures I’ve been designing. Thank you for the showcase!

[@KnarbMakes]

This is the most extreme unboxing video I've ever seen. No rush on any of your videos, always a treat to see one pop up! If you're looking for smoother and smoother prints, check out anti-aliasing settings. I've had good results but you need to play around with test prints and compare. Think of it like setting shades of gray instead of on or off on those individual pixels. Cheers!

[@CajunCraftastrophe]

I'm so excited about the fact that action figures can be printed. That giant Boba Fett is awesomeness x 2! Your video making is so top tier, gorgeous, and so very relaxing. This machine is one smooth beast my friend. Excellent job!

[@user-td5lr1zd9n]

We love you Crafsman. Truly.

[@donsawyer4521]

While we do miss you, you at your best is what we all want. Thank you for uploading!

[@qeidren3215]

Love your dedication, Crafsman. Seeing you come into frame when pulling the printer out was brilliant! Also: I just want to say thankyou. Watching your experience with Elegoo printers convinced me to get into the Elegoo Jupiter Kickstarter. It was well worth the wait.

[@TheCrafsMan]

Thank you so much! I'm really glad to hear this. I genuinely like Elegoo products, and am glad to stick with them. :)

[@micky8ball]

I cherish these vids when they're put out. Thank you for your time and effort. Please take care of yourself first and stay healthy.

[@jackiemorrell2298]

You're my favorite maker and I missed you. Even when I have no clue as to what you're doing - like today - I'll watch it, you are just too interesting, funny and a fun to watch. I would love more ASMR videos from you.

[@soarinsuzi7206]

So happy to see you back! 😊 I think Shop Baby did alright with the sharp object.

[@DirtyPlumbus]

I had no idea there was any issue with using standard timelapse for resin printing. The solution is so simple, it's genius. That was cool to learn.

[@EazyEffects]

Idk why but “Illegoo Saturn 2” just put a smile on my face 😌

[@patjackmanesq]

Doesn't matter how often you upload. The little shot of joy your videos give me are more than welcome any time. Love ya Crafman

[@danboyd7866]

ditto!

[@contr4naturam]

Crafsman, thank you for the time/energy/effort that goes into these videos. I always look forward to them, and I LOVE Shop Baby

[@StripeyType]

Man you know we love you all too. The kiddos will be happy to see this one later today when they get some TV time.

[@DougUnfunny]

ITS A CHRISTMAS MIRACLE, CRAFTMAN IS BACK!

[@thevet2009]

By random surfing, I found this youtuber.... simply one of the best!

[@TheCrafsMan]

Thank you for giving my channel a chance! I hope you continue to enjoy!

[@valentine_puppy]

Well, I figured it had to be your health and you have done so much for the crafting community that I figured hey, Crafsman is done. I don't expect to tune into your channel every single day. I don't know how many times I have watched your videos from the past. Nor, How many times I will be watching them again, and again. The information is solid. I really like Crafsman. I don't even see a puppet. I see the Crafsman. I dunno. I always expected you would upload when you were wanting to.

[@rodline9027]

You know what makes a rainy crappy day better......some ....steady craftin!!

[@kennethstudstill]

You can get arctan (written as tan⁻¹) in Windows Calculator by opening the menu in the upper left, clicking scientific, clicking trigonometry located below the memory buttons, and clicking 2nd to bring up the inverse trigonometric functions.

[@bricegordon64]

Either way, not applicable to stepper motors, thats just not how they work. Microstepping is asking for problems

[@j00bs]

CrafsMan, your videos have gotten me into injection molding and with this Saturn 2 I purchased I now have the ability to make molds. I would never have dreamed to make my own designer toys without you! Please make more videos of you injection molding with 3d printed molds - i think you can go very far in that direction. thanks again

[@ericsmith1508]

Even if I weren't into crafting of so many varieties, I think I would still enjoy watching your videos. Sort of like the way people who never even wanted to paint still watched Bob Ross. The voice, the personality, the general feel good vibes. You are always informative and entertaining and we are all so glad you are doing these videos!

[@creamyhummus]

We love you CrafsMan, don't burn yourself out! We'll still be here no matter what :)

[@bonce]

oh this was a treat to listen and watch (but mostly listen, I gotta be honest) at the end of a hard week.

[@81OH4Z4RD]

Fun as always. Your original music and its use to create atmosphere and mood in the videos are really great.

[@yotoeben]

Crafsman, your Rolan short really ignited some passion in my motion graphics career that I have been needing for awhile- it was really amazing seeing you use tools I use everyday to make something so uniquely you. As an animator myself, I understand the sheer amount of time and brain power it takes but as a fan of your creations and videos, I just hope you focus on projects that you are truly as passionate about. No matter what, I will be there to watch!

[@UncleJessy]

Did I read that right - TheCrafsman + Saturn 2 Resin 3D Printer... time to grab some popcorn

[@ScottDodsonVideo]

We need a TheCrafsman x Uncle Jessy collab

[@kristen1441]

I love your crafts, but your characters make my day!

[@wxb200]

Your Videos kept me SANE through the beginning months of the Pandemic. I thank you so much! I would have lost my mind without some Artistic Stimulation. Also, I really want to go to Fred's Dollar Store...

[@the_str4ng3r]

Hey CrafsMan, I just realized something you will appreciate... the supports of the 3d prints with the clear/amber hue resin totally reminds me of Doozer construction materials from Fraggle Rock

[@courier11sec]

We love you so much, CrafsMan. Thank you for what you bring no matter how frequently or infrequently you bring it. You're a light. 😻

[@jamiebruce4734]

I nearly 'noped' out when Shop Baby started running. But I didn't. I love it.

[@Zergamistico]

I am really your Fan; i Saw your video of stopmotion a lot of times, im from Mexico city, and your a kínd of my Gurú Craft, thanks Craftman to open your heart and creativity

[@TCL4RK]

Researching 3D printers and stumbled across this absolute madness and I love it. Not what I was expecting but thoroughly enjoyed. 11/10 🤣

[@absotivelypawsilutely796]

Shop baby did well, what a good little helper. Always happy to see a new video, but hey making things takes time and energy, and we've all got to take care of ourselves, I don't mind if it takes a bit of time between uploads.

[@machineman6498]

New CrafsMan upload. Lunch break can’t come quick enough!

[@johnvocatura1019]

The baby opening the box is an A+ CrafsMan.

[@encouragingthings]

Glad to see you back Crafsman! I enjoy all the things you make, but understand that sometimes you have to specialize to thrive. Never give up on the things you love, though and an animation here or there is always welcome amongst the melting and kitbashing! Here's also hoping your new printer brings you all the things you're looking for in a big print bed with high resolution!

[@mraduanemc]

As always, EVERYTHING stops for Crafsman. We love you, friend.

[@marycarver3759]

Always a great video from you CrafsMan! Love watching. You make me smile.

[@tjmb]

16:03 CrafsMan, thank you for this relaxation shot right there. 😊 Thank you also for this whole video. Excellent prints, and the time lapse segments were absolutely beautiful! Love and happiness to you, CrafsMan! ❤😃

[@bcafed]

Shop baby is my new favorite.

[@prestonbyrd8443]

Always a joy to watch you work.

[@wreckgarr50]

These are the type videos I like best. And I super love the Boba in clear!

[@NepotismTV]

The Shop Baby part killed me. CM has such a good sense of humor. I appreciate it so much.

[@kimosabe_djp]

The music for the print timelapse and then the music transition with the injection mold montage (starting at 10:50) is actually so incredible. I'd love to listen to an extended version if you ever add to it.

[@rogueyun9613]

You always leave me a little better for having watched your videos... I know people chip in to help support you and they have their expectations tied to their donations but I am just grateful to have what you've given freely.

[@UncleTedman]

Good stuff, CrafsMan. Keep doing what you enjoy doing ... It shows in your videos when you're having fun.

[@PatrickHoodDaniel]

Good shop baby... Well done! Burn out is a real thing! I am getting that as well with my videos. I hope you hang in there because your videos are on the top of my list.

[@pamdemonia]

So nice to hear from you! Love you!

[@stevengeraldo8291]

i love you craft man, or atleast your content. so warm kind and inviting and with an amazing amount of information and intertainment value. Stay gold; you deserve the world

[@artyoz]

If Shop Baby and Bill's Cat ever get in cahoots with each other, we might have a delightful problem on our hands.

[@ajlbeer]

Don't become a slave to the Patreon, you have so much talent. Keep animating! Keep making stuff! It's the quality, not the quantity =u)

[@frozenoverstudios5086]

It's good to see another vid from you! always brightens my day

[@thenoblerot]

Anybody else get a rush of serotonin and dopamine upon seeing a new upload from Craftsman?

[@stephanieelbert8542]

Yay! Welcome to resin printing! Can't wait to see all the fun you have with this.

[@stephanieelbert8542]

Ok i jumped the gun. I missed when you got the first one. Still welcome. I love all your different crafts and your work.

[@jimmybongo777]

Happy to be watching whatever you're up to Crafsman. Keep on keeping on brother.

[@antongunther3977]

Man, I have had my sights on this bad boy for a while now. This machine is the ganna be the main reason I'm ganna pick up like 5 shifts during my winter break.

[@danboyd7866]

I just found you about 2 months ago.......binge watched a lot of your videos. So happy to see a new video! Finding your channel was a blessing. Thanks for all that you have shared through your videos! You have inspired me to dust off that creativity switch! I think as we grow in to responsible adults, we forget how rewarding it can be to just slow down and partake of the little things in life we enjoy so much. Thank you again for all that you share with us! Love your videos! So genuine. God Bless.

[@epicareplicas]

Just a tip Crafsman, if you wanna remove supports way easier, drop the print in warm water for a few mins then remove the supports, then cure the model that way you arent trying to remove hard cured supports

[@Illuminautable]

Welcome back, CrafsMan! Always happy to see a new vid from your channel. Stay curious, stay creative and most of all: Do you. Do the things that make you happy.

[@4Recreational_Use_Only]

Hello Crafsman. You sound a bit sad at the end of this video and that makes me sad too. So I'm here to remind you of an interview you gave on Work Ethic about 4 years ago. Your words have helped me over these years to get my groove back when ever I've been disheartened. So remember your own words and just be who you want to be. That's going to be enough for us too! We love you. Let's keep steady craftin.🙂

[@rumblebees]

This video came at just the right time Craftsman! Getting to see a new video and I just got the same printer as an early gift. If you end up doing more resin print videos I'd love to see a video of you trying out your best methods to smooth prints for painting cause you always do an amazing job explaining things.

[@wgraves535]

So glad to see a new Video! Keep up the amazing work CraftMan, love your work and dedication :)

[@aprilwhite515]

I came for the asmr value of all your videos and stayed. I love your channel!

[@sophiarose03]

Whatever happens on your channel, I’m along for the ride. I love seeing you do the things that make you happy. I hope that no matter what you’re working on, or how long it is between videos, that you’re having fun.❤

[@johnbearross]

Love your videos. Congrats on the new machine. If you want your supports to peel off like orange rinds, soak them in hot water 10 minutes before putting them in a curing machine. Best, JBR

[@grownnotbought775]

Love your videos!! Like always amazing work! Can’t wait for the next one!

[@jimjones7980]

Love your videos. When you post, it is like a present.

[@Beansimus]

It's been a while craftsman. Glad to see you're still steady crafting. I love shop baby

[@sergeyorlov1234]

was planning to buy Saturn2 and your video is just on time! glad to see u btw)

[@thedicehavespoken6234]

Glad to hear you're gonna get back into regular uploads. :) I missed having you on my feed

[@peoplethesedaysberetarded]

Hello again, Crafsman. It is always such a pleasure when I see you’ve created and posted another KZbin video. Happy Christmas our paths don’t cross again before this.

[@rajangalala9492]

I also got me a Saturn 2 recently. Definitely going to try that 60.31° angle trick since I've been having trouble with warpage in my flat prints. Thanks, Crafsman!

[@Maverickzeros]

The angle is really to reduce ridges forming on flat surfaces. If you are having warping then you may to try curing with supports on. This is recommended by Siraya tech for their fast resins, and I've found that it reduces it alot. But it will make supports a little more difficult to remove.

[@pooppyybuhhole]

love your videos crafsman! always so creative and entertaining to watch!

[@AbandonedMiniatures]

Love this video Crafsman! You always keep me well entertained, no matter what topic you’re on.

[@dickinsontanner]

So glad to watch your vids again :D

[@Andrew-Comi]

Love you crafsman! Happy holidays to you and the entire crafs family

[@brandonbrown833]

I respect your ambitions of getting into the animations, but I really enjoy these types of videos. They're informative and relaxing. Good to see you back at it!

[@AndrewSink]

Nice work! You did great on that Resinlapse, it looked perfect!

[@recycledminis]

Your videos always being me joy, CrafsMan!

[@SabrinasWorkshop]

Putting the bounty hunter in the bacta tank made me LOL. You're a treasure, keep on steady crafting!

[@theinsaneshecklador6598]

Merry Christmas CrafsMan 🎄 I hope you, your loved ones, your projects, and your action figures are all doing well and staying warm.

[@AndrewMakingAnything]

I thoroughly enjoyed this one, Crafsman. I hope you've been well despite the burnout. Even with the lack of videos, I continue to support the channel since the laughs and chill moments you've given me are something I'll always appreciate. I relate to the burnout of content creation and the balance of trying to do things that interest you. While also being reasonable with yourself and those who enjoy your videos. It's something that I think about a lot, and I still haven't really figured it out. However, after stepping away and doing passion projects, or a project that I'd put off for years for one reason or another, has really helped me get back into things.

[@egodreas]

The supports look exactly like doozer scaffolding. Making it edible is one of those things that just needs to happen! Bonus points if you can make the resin out of radishes, of course.

[@danthemakerman]

Always happy to see you pop up in my notifications! Can't wait to see more Shop Baby cameos.